LG HS34S-D0 User manual

HS34S_D0.BMARLLK_ENG_2040 4/16/09 11:02 AM Page 1

Model: HT32S (HT32S-D0, SH34S-F/W)

Full HD up-scaling (1080p)	Home theater Speaker ez Set-up
(Go to page 10)	(Go to page 17)
Portable In	USB Direct Recording
(Go to page 17)	(Go to page 16)

As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency.

ENERGY STAR® is a U.S. registered mark.

English

PORTUGUÊS

FRANÇAIS

P/NO : MFL62242040

HS34S_D0.BMARLLK_ENG_2040 4/16/09 11:02 AM Page 2

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre.

Use of controls, adjustments or the performance of procedures

other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Disposal of your old appliance

1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2.All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.

European representative :

LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : [phone])

2

HS34S_D0.BMARLLK_ENG_2040 4/16/09 11:02 AM Page 3

Welcome to your new stylish home cinema system

Contents

Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Speaker Connection . . . . . . . . . . . . . . . . . . . . . . . . .6 Making system connections . . . . . . . . . . . . . . . . . . . .7

Listening to the sound from your analog component . .7

OSD Initial language settings - Optional . . . . . . . . . . .8

Initial Setting the Area Code - Optional . . . . . . . . . . . .8

Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . .8-9 Enjoying a pre-programmed sound field . . . . . . . . . .10

Resolution setting . . . . . . . . . . . . . . . . . . . . . . . . . .10 Displaying Disc Information . . . . . . . . . . . . . . . . . . .11

Playing a disc or file . . . . . . . . . . . . . . . . . . . . . .11-13

Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . .13 Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . .14 Listening to music from your portable player . . . . . . .15 Recording to USB . . . . . . . . . . . . . . . . . . . . . . . . . .16 Home Theater Speaker ez Set-up . . . . . . . . . . . . . .17

Listening to music from your USB device . . . . . . . . .17

Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . .20

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

What is SIMPLINK?

Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection.

•Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.

•Refer to the TV owner’s manual for the details of SIMPLINK function.

•LG TV with SIMPLINK function has the logo as shown above.

•Use a higher version cable than 1.2A HDMI cable.

3

HS34S_D0.BMARLLK_ENG_2040 4/16/09 11:02 AM Page 4

Main Unit

r q p o n m l

a

*Touch sensor

				This unit has sensitive controls that respond to the
				touch of your fingers.
				If you press repeatedly N/ X while the input mode is
				flashing by holding N/ X, you can also change the
				input mode. You can also change the volume by
			k	moving your finger around the touch wheel.

j

b

*

i

h

c

d e

f g

a DISPLAY WINDOW

h TUNING UP & SKIP (>)

n AUX (L/R) INPUT

b POWER

i PLAY/PAUSE (N / X)

o MONITOR OUTPUT

c REMOTE SENSOR

j PORTABLE IN JACK

p FM ANTENNA CONNECTOR

d DISC SLOT

k USB PORT

q OPTICAL IN JACK

e EJECT

l SPEAKER TERMINAL

r HDMI OUT JACK

f TUNING DOWN & SKIP (.)

m COMPONENT VIDEO OUT

g STOP

JACKS

Precautions in using the touch buttons

•Use the touch buttons with clean and dry hands.

-In a humid environment, wipe out any moisture on the touch buttons before using.

•Do not press the touch buttons hard to make it work.

-If you apply too much strength, it can damage the sensor of the touch buttons.

•Touch the button that you want to work in order to operate the function correctly.

•Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions.

4

HS34S_D0.BMARLLK_ENG_2040 4/16/09 11:02 AM Page 5

Remote control

a

b

c

d

e

f

a

FUNCTION : Changes the input source ( AUX, AUX OPT, PORTABLE, FM, DVD/CD, USB)

SLEEP : Sets a certain period of time after which the unit will switch to standby.

-Press SLEEP repeatedly to select the desired time period options (in minutes): (Dimmer on t Sleep timer value t Dimmer off)

Dimmer on: The display window is dimmed and the touch wheel turns off.

-To view the time countdown to the standby mode, press SLEEP again.

-To deactivate the sleep timer, press SLEEP until the previous status is displayed or press POWER to switch the unit to standby.

POWER: Switches the unit ON or OFF. OPEN/CLOSE (Z) : Ejects or inserts disc from the slot loader.

TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear.

DISPLAY: Accesses On-Screen Display. MENU : Accesses the menu on a DVD disc. SETUP : Accesses or removes setup menu

b

PRESET(U/u): Selects programme of Radio. TUN.(-/+): Tunes in the desired radio station.

I / i / U / u (left/right/up/down):Used to navigate on-screen displays.

ENTER : Acknowledges menu selection. RETURN (O): Exites the setup menu.

REC (z) : USB Direct Recording

c

STOP (x): Stops playback or recording.

PLAY (B), MO./ST.: Starts playback. Selects Mono/Stereo. PAUSE/STEP (X): Pause playback.

SKIP(. / >): Go to next or previous chapter/track.

SCAN(bb/BB) : Search backward or forward.

d

TVtHT SPK (Home theater Speaker ez Set-up):

Press HTt HT SPK to select the AUX OPT directly.

MUTE : Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone.

VOLUME (+/-) : Adjusts speaker volume.

LG EQ: You can select a Natural or local specialization equalizer effect by using LG EQ.

EQ : You can choose sound impressions. REPEAT (RANDOM): To select a play mode. (random, repeat)

SUBTITLE: During playback, SUBTITLE repeatedly to select a desired subtitle language .

0-9 numerical buttons: Selects numbered options in a menu.

e

TV Control buttons : Controls the TV. (LG TV only)

PROG./MEMO. :

-Accesses or removes Program menu.

-Manually programs preset radio stations.

CLEAR: Removes a track number on the Program List.

f

RDS: Radio display mode

PTY/RESOLUTION:

-Views the various displays of the RDS.

-Sets the output resolution for HDMI and COMPONENT VIDEO OUT jacks.

Put the battery into the remote control

Make sure that the + (plus) and – (minus) on the batteries match those on the remote control.

Controlling the TV.

You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER (TV) and press PR/CH (+/–) button repeatedly until the TV turns on or off.

5

HS34S_D0.BMARLLK_ENG_2040 4/16/09 11:02 AM Page 6

Speaker connection

Attaching the speakers to the unit

aYou will have received three speaker cables.

Each one is colour-coded by a band near each end and connects one of the three speakers to the unit.

bConnect the wires to the unit.

Match each wire’s coloured band to the same coloured connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.

Connect the black end of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus).

cConnect the wires to the speakers.

Connect the other end of each wire to the correct speaker according to the colour coding:

COLOUR	SPEAKER	POSITION
Orange	Sub Woofer	This can be placed in any front
		position.
Red	Front	In front of you, to the right of
		the screen.
White	Front	In front of you, to the left of
		the screen.

To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on each speaker. Insert the wire and release the finger pad.

Be careful of the following

Be careful to make sure children not to put their hands or any objects into the *speaker duct.

*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).

FM Antenna connection

FM - Connect the FM antenna to the unit.

The reception will be its best when the two loose ends of the antenna are in a straight and horizontal line.

6

HS34S_D0.BMARLLK_ENG_2040 4/16/09 11:02 AM Page 7

Making system connections

Connecting the video out to your TV.

Check the jacks of your TV, and choose the A , B , or C connection.

Picture quality improves in order from A to C .

C A B

CTo connect to a TV with the HDMI jack

Connect the HDMI cable from the HDMI OUT jack on the rear of the unit to the HDMI IN jack on your TV.

•If your TV does not accept your resolution setting, abnormal picture appears on the screen.

•Use the HDMI Cable within 5 meters.

•If the volume bar is not displayed on TV screen, when you select Simplink to off on TV, restart the unit.

Available resolution according to connection

[HDMI OUT] : 1080p, 1080i, 720p and 480p (or 576p) [COMPONENT VIDEO OUTPUT] : 480p (or 576p) and 480i (or 576i) [MONITOR OUTPUT] : 480i (or 576i)

Listening to the sound from your analog component

Analog signal components such as VCR and TV.

ATo connect to a TV with the video in jack

Connect the video cable from the MONITOR OUTPUT on the rear of the unit to the video in jack on your TV.

or

To connect to a TV with the SCART jack

Connect the RCA to SCART cable from the MONITOR OUTPUT on the rear of the unit to the SCART jack on your TV.

BTo connect to a TV with the component video in jacks

If your TV has component video in, connect a component video cable from COMPONENT VIDEO (PROGRESSIVE SCAN) (Y, PB and PR) jacks on the rear of the unit to the component video in jacks on your TV.

ON REMOTE

1

Connect the audio out of your analog component

to the AUX (L/R) INPUT on the rear of the unit:

or

Connect the SCART jack of your analog component

-

to the AUX (L/R) INPUT on the rear of the unit.

2

Select the AUX function:

FUNCTION

7