LG GS5162TIJV, GS-5264-AVJZ, GS-5263-AEGV, GS-5262-AVJV, GS5162AEFV User Manual
...
OWNER’S MANUAL
ENGLISH
NORGE
DANMARK
ESPAÑA
DEUTSCHLAND
SUOMI
SLOVENIJA
ITALIA
FRANÇAIS PORTUGAL NEDERLAND
SXS
REFRIGERATOR
Please read this manual carefully before operating
your set and retain it for future reference.
P/N: MFL67222502_REV01
OM_A2_B3_EN.indd 1 2011-02-28 07:44:17
www.lg.com
ΕΛΛAΣ SVERIGE
(In the UK Only)
Electrical Connections
ENGLISH
Important
The wires in this mains lead are coloured in accordance with the following code:
GREEN AND YELLOW:EARTH
BLUE:NEUTRAL
BROWN:LIVE
This appliance must be earthed
Green and Yellow (Ear th)
Brown(Live)
Blue(Neutral)
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol( ) or coloured
Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the
letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the
letter L or coloured Red.
If a 13 amp(BS 1363) plug is used, t a 13 amp BS 1362 fuse.
Fuse
Cord
grip
2
OM_A2_B3_EN.indd 2 2011-02-28 07:44:17
Introduction
Table of contents
Entry ________________________________________________________ 4
Important safety instructions ______________________________________ 4
Identication of parts ____________________________________________ 6
ENGLISH
Installation
Operation
Where to install ________________________________________________ 8
Door removal __________________________________________________ 8
Door replacement ______________________________________________ 9
Feed water pipe installation (Dispenser model only) ____________________ 10
Door height adjustment __________________________________________ 10
Starting ______________________________________________________ 12
Adjusting the temperature and functions _____________________________ 12
Dispenser use (on some model) ___________________________________ 18
Two stars section (Applicable to some models only) ____________________ 22
Refreshment centre(Applicable to some models only) __________________ 22
No Plumbing Ice & Water (Applicable to some models only) _____________ 23
Shelf (Applicable to some models only) _____________________________ 24
Wine holder (Applicable to some models only) ________________________ 24
Egg box (Depends on model) _____________________________________ 24
Fresh 0 Zone (Applicable to some models only) _______________________ 26
Usage of door rack (option) _______________________________________ 26
Opti Temp Zone Temperature Transition Corner (Applicable to some models only) ___ 27
Temperature Change at Opti Temp Zone (Applicable to some models only) ________ 27
Opti Temp Zone Temperature Transition Corner (Applicable to some models only) ___ 27
Suggestion on
food storage
Care and
maintenance
OM_A2_B3_EN.indd 3 2011-02-28 07:44:18
Location of foods _______________________________________________ 28
Storing foods __________________________________________________ 29
Suggestion for energy saving _____________________________________ 29
How to dismantle parts __________________________________________ 30
General information _____________________________________________ 32
Cleaning _____________________________________________________ 32
3
Troubleshooting ______________________________________________ 33
ENGLISH
Don’t use an
extension cord
Accessibility
of Supply Plug
Supply Cord
Replacement
Warning
Introduction
Entry
The model and serial numbers are found on the inner case on the back
or one side of the refrigerator compartment of this unit. These numbers
are unique to this unit and are not available to others. You should record
requested information here and retain this guide as a permanent record of
your purchase. Staple your receipt here.
Date of purchase :
Dealer purchased from :
Dealer address :
Dealer phone no. :
Model no. :
Serial no. :
Important safety instructions
Before it is used, this refrigerator must be properly installed and located in accordance with
the installation instructions in this document. This Refrigerator is intended for Domestic
indoor use only.
Never unplug your refrigerator by pulling on the power cord. Always grip plug rmly and
pull it straight out from the outlet.
When moving your appliance away from the wall, be careful not to roll over the power
cord or to damage it in any way.
After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when your hands are damp or wet. Skin could adhere to these
extremely cold surfaces.
Unplug the power cord from the power outlet for cleaning or other maintenance. Never
touch the appliance with wet hands as you may receive an electric shock or injure yourself.
Never damage, press, severely bend, pull or twist the power cord as damage to the cord
may cause re or electric shock. Never touch the cord if you are uncertain if the appliance
is correctly earthed.
Never place glass items in the freezer as they may break due to expansion of their contents
on freezing.
Never put your hands into the storage bin of the automatic ice maker as you could be
injured during its operation.
The appliance is not intended for use by young children or inrm persons without
supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Never allow anyone to climb, sit, stand or hang on the refreshment centre door. These
actions may damage the refrigerator and even tip it over, causing severe personal injury.
It is advised that this appliance should be connected through an independent power
socket to prevent it and other appliances from overloading the circuit and causing a power
outage.
The appliance should be positioned so that the supply plug is easily accessible for quick
disconnection should an accident occur.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualied person in order to avoid a hazard.
Do not modify or extend the Power Cord length.
It may cause electric shock or re.
4
OM_A2_B3_EN.indd 4 2011-02-28 07:44:18
Introduction
Child entrapment
Warning
Don’t store
Warning
Grounding
(Earthing)
Warning
Warning
DANGER: Risk of child entrapment.
Before you dispose of your old refrigerator please remove doors but leave the shelves
in place so that children cannot climb inside.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not store or use gasoline or other ammable vapour and liquids in the vicinity of
this or any other appliance.
In the event of an electric short circuit, grounding (earthing) reduces the risk of
electric shock by providing an escape wire for the electric current.
In order to prevent possible electric shock this appliance must be earthed. Improper
connection of the earthing plug can cause electric shock. Consult a qualied
electrician or service engineer if the earthing instructions are not completely
understood, or if you have doubts as to whether the appliance is properly earthed.
Keep ventilation openings in the room where the appliance is installed clear of
obstruction.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
Disposal procedures. If disposing of this appliance, please consult with a service
agent or a similarly qualied person for more details.
ENGLISH
This appliance may contain (Check the rating/comliance label for the refrigerant type and amount. Applicable to some models only) a small amount of
isobutane refrigerant (R600a),
natural gas with high environmental compatibility, but it is also combustible.
When transporting and installing the appliance, care should be taken to ensure
that no parts of the refrigerating circuit are damaged. Refrigerant squirting out
of the pipes could ignite or cause an eye injury. If a leak is detected, avoid any
naked ames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
In order to avoid the creation of a ammable gas air mixture if a leak in the
refrigerating circuit occurs, the size of the room in which the appliance may be
sited depends on the amount of refrigerant used. The room must be 1m2 in size
for every 8g of R600a refrigerant inside the appliance. The amount of refrigerant in your particular appliance is shown on the identication plate inside the
5
appliance. Never start up an appliance showing any signs of damage. If in
doubt, consult your dealer.
OM_A2_B3_EN.indd 5 2011-02-28 07:44:18
ENGLISH
Introduction
Door rack
Lamp/LED Lamp (option)
Shelf
Shelf
Ice Maker
Door rack
Drawer
Identication of parts
*Non dispenser model - Type 1
Freezer
Compartment
*
Refrigerator
Compartment
Introduction
Dairy Corner
Lamp /LED Panel (option)
Shelf
Door rack
Shelf
Shelf (folding or normal)
Shelf
Door rack
Vegetable drawer
Door rack
Door rack
Lower cover
Door rack
Shelf or drawer
Lamp/LED Lamp (option)
Shelf or drawer
*
Door rack
Drawer
Door rack
Lower cover
Shelf
NOTE
• Parts, features, and options vary by model. Your model may not include every option.
*Non dispenser model - Type 2
Freezer
Compartment
Refrigerator
Compartment
Dairy Corner
Lamp /LED Panel (option)
Shelf
Wine rack (Plastic or wire)
(Optional)
Door rack
Shelf
Snack drawer (Optional)
Shelf (folding or normal)
Refreshment centre (Optional)
Lamp /LED(option)
Door rack
Egg box
Vegetable drawer
Door rack
Humidity Switch
Opti Temp Zone (Optional)
Fresh 0 Zone (Optional)
Guide pitcher
(Optional)
6
NOTE
• Parts, features, and options vary by model. Your model may not include every option.
* The process of freezing occurs the fastest on the marked shelf.
OM_A2_B3_EN.indd 6 2011-02-28 07:44:19
Introduction
Space plus
Door rack
Automatic
Lamp/LED Lamp (option)
ice maker
Door rack
Drawer
*Dispenser model - Type 1
Freezer
Compartment
*
Shelf
Refrigerator
Compartment
Dairy Corner
Lamp /LED Panel (option)
Filter (Internal lter model only)
Shelf
Door rack
Shelf
Refreshment Centre (optional)
Shelf (folding or normal)
Guide pitcher
Shelf
Door rack
No Plumbing Ice & Water (Optional)
Vegetable drawer
Door rack
ENGLISH
Door rack
Lower cover
Extra door
rack(option)
Automatic
Icemaker
Lamp/LED Lamp (option)
Shelf
Shelf or Drawer
*
Door rack
Drawer
Door rack
Lower cover
NOTE
• Parts, features, and options vary by model. Your model may not include every option.
*Dispenser model - Type 2
Freezer
Compartment
Refrigerator
Compartment
Dairy Corner
Lamp /LED Panel (option)
Shelf
Wine rack (Plastic or wire) (Optional)
Door rack
Shelf
Can Server (Optional)
Snack Drawer (Optional)
Refreshment Centre (Optional)
Lamp /LED (option)
Shelf
No Plumbing Ice &
Water (Optional)
Egg Box
(Optional)
Vegetable drawer 1 or 2
Humidity Switch
Opti Temp Zone (Optional)
Fresh 0 Zone (Optional)
Door rack
Shelf
Guide pitcher
(Optional)
7
NOTE
• Parts, features, and options vary by model. Your model may not include every option.
* The process of freezing occurs the fastest on the marked shelf.
OM_A2_B3_EN.indd 7 2011-02-28 07:44:21
Select a good
ENGLISH
Disposal of the
old appliance
Remove lower
cover and then
compartment
location
feed water
tube
Remove the
freezer
door
Installation
Where to install
1. Place your appliance where it is easy to use.
2. Avoid placing the unit near heat sources, direct sunlight or moisture. Do not operate the
appliance outdoors where it can be exposed
directly, or indirectly to sun, wind and rain.
3. To ensure proper air circulation around the
fridge -freezer, please maintain sucient
space on both the sides as well as top and
maintain at least 2 inches (5 cm) from the
rear wall.
4. To avoid vibrations, the appliance must be
levelled.
5. Do not install the appliance in temperatures
of less than 5°C as the performance may be
aected.
This appliance contains uid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable.
All the packaging materials should be sent to the collection centre for recycling. For
details of your local recycling centre, please contact your local council.
Door removal
Electric Shock Hazard
Disconnect electrical supply to refrigerator before installing. Failure to do so could
result in death or serious injury.
If your front door is too narrow to get
the refrigerator into the house,
remove the refrigerator doors and pass
the appliance through laterally.
Remove the lower cover by loosening
all the screws. Then push in the feed
water tube while depressing the
connector , as shown in the illustration
on the right.
NOTE
• If a tube end is deformed or abraded, trim the end with sharp knife until perfectly round.
1) Remove the hinge cover by
loosening the screws. Then separate all connection wires except
for the earth.
Upper
hinge
2) Remove the keeper by rotating it
counter clockwise ( ) and then
lifting the upper hinge up ( ).
①
②
Applicable to No Plumbing
Ice & Water Model only
Feed water tube
Hinge
cover
Keeper
Connection
wires
Earth line
Upper hinge
Lower cover
8
OM_A2_B3_EN.indd 8 2011-02-28 07:44:22
NOTE
• When removing the upper hinge, be careful that the door does not fall forwards .
Installation
3) Remove the freezer compartment door
by lifting it upward. The door should be
lifted high enough for the feed water
pipe tube to be completely pulled out.
Lower cover
NOTE
• If you have removed the refrigerator compartment door to pass the appliance
through an access door, lay the door down, but be careful not to damage the feed
water pipe tube.
water feed pipe tube to
be completly pulled out
Enough for
ENGLISH
Remove the
refrigerator
compartment
door
Pass the
refrigerator
1) Loosen the hinge cover screws and
remove the cover. Remove
connection wires, if any, except for
the earth line.
Connection
2) Remove keeper by rotating it
clockwise ( ) and then remove the
upper hinge by lifting it up ( ).
①
②
3) Remove the refrigerator
compartment door by lifting it up.
Pass the refrigerator laterally through
the access door as illustrated to
the right.
wires
Upper hinge
Keeper
Lower hinge
Door replacement
Once the fridge is through the access door, remount the fridge doors by following
the door removal instructions in reverse.
9
OM_A2_B3_EN.indd 9 2011-02-28 07:44:23
installation
ENGLISH
If the freezer
compartment
door is lower than
the refrigerator
compartment
Before
Warning
door
Installation
Feed water pipe installation (Dispenser model only)
▪Automatic ice maker operation needs water pressure of 147~834kPa
(1.5~8.5kgf/cm2) (The pressure is correct when an instant paper cup (180cc) is
filled in 3 sec.).
▪If water pressure does not reach the rating 147kPa(1.5kgf/cm2) or below, it
is necessary to purchase a separate pressure pump for normal automatic icing
and cool water feed.
▪Keep the total length of the feed water pipe tube within 8m and be careful that
the tube does not bend. If the tube is 8m or longer it may cause water feed problems owing to the drain water pressure.
▪Install the feed water pipe tube at a place free from heat.
▪Connect to drinking water supply only.
▪Refer to instructions with water lter kit for installation.
Door height adjustment
Level the door by inserting flat( - type) driver into the groove of the left height
adjusting screw and rotate it clockwise ( ).
①
Height dierence
Height
dierence
Left height
adjustment screw
If the freezer
compartment
door is higher than
Level the door by inserting flat( - type) driver into the groove of the left height
adjusting screw and rotate it clockwise ( ).
Height dierence
①
the refrigerator
compartment
door
Height
dierence
10
Right height
adjustment screw
OM_A2_B3_EN.indd 10 2011-02-28 07:44:23
Installation
After levelling
the door height
Next
The refrigerator doors will close smoothly by adjusting the front side using the
height adjustment screw. If the doors do not close correctly, performance may be
affected.
1. Wipe o all dust accumulated during shipping and clean your appliance
thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during
shipping.
3. Connect the power supply cord (or plug) to the outlet. Don’t double up with
other appliances on the same outlet.
ENGLISH
11
OM_A2_B3_EN.indd 11 2011-02-28 07:44:23
Operation
Starting
When your refrigerator is first installed, allow it to stabilize at normal operating
temperatures for 2-3 hours prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
ENGLISH
Adjusting the temperature and functions
*Non dispenser model - Type 1
Refreshment Centre button
(Optional)
Refreshment Centre (Optional)
Function display board
NOTE
• Your model may not include every option.
•The control display is touch operated. Excessive moisture on the display panel may
result in its malfunction. Please keep the display panel dry and clean.
12
OM_A2_B3_EN.indd 12 2011-02-28 07:44:24
Loading...