LG GRB207TUJA Owner's Manual

Electrical Connections

(In the UK Only)

Important

The wires in this mains lead are coloured in accordance with the following code :

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows :

The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol(b) or coloured Green or Green and Yellow.

The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.

The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.

If a 13 amp(BS 1363) plug is used, fit a 13 amp BS 1362 fuse.

GREEN AND YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

This appliance must be earthed

Entry

The model and serial numbers are found on the inner case or back of refrigerator compartment of this unit. These numbers are unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Staple your receipt here.

Date of purchase : Dealer purchased from : Dealer address : Dealer phone no. : Model no. : Serial no. :

This refrigerator must be properly installed and located in accordance with the installation instructions before it is used.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

When moving your appliance away from the wall, be careful not to roll over or damage the power cord.

After your refrigerator is in operation, do not touch the cold surfaces in the freezer compartment, particularly when hands are damp or wet. Skin may adhere to these extremely cold surfaces.

Unplug the power cord from the power plug for cleaning or other cares. Never touch it with wet hands because you can get an electric shock or be hurt.

Never damage, process, severely bend, pull out, or twist power cord because power cord damage may cause a fire or electric shock. You have doubts on whether the appliance is properly grounded.

Never place glass products in the freezer because they may be broken when their inner matters are frozen.

The appliance is not intended for use by young children or infirm persons without supervision.

Young childeren should be supervised to ensure that they do not play with the appliance.

If possible, connect the refrigerator to its own individual electrical outlet to prevent it and other appliances or household lights from causing an overload that could cause a power outage.

The refrigerator-freezer should be so positioned that the supply plug is accessible for quick disconnection when accident happens.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Do not modify or extend the Power Cord length.



It will cause electric shock or fire.

Don’t use an

extension cord

Accessibility of

Supply Plug

Supply Cord

Replacement

Warning

Introduction

Important safety instruction

Identification of parts

DANGER : Risk of child entrapment. Before you throw away your old refrigerator or freezer : Take off the doors Leave the shelves in place so that children may not easily climb inside. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

Don’t store or use gasoline or other flammable vapor and liquids in the vicinity of this or any other appliance.

In the event of an electric short circuit, grounding (earthing) reduces the risk of electric shock by providing an escape wire for the electric current. In order to prevent possible electric shock, this appliance must be grounded improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded.

Child entrapment

warning

Don’t store

Grounding (Earthing)

Introduction

•

If you find some parts missing from your unit, they may be parts only used in other models.

NOTE

Freezer compartment

Refrigerator compartment

Milk product corner

Door rack

Lamp

Ice making compartment

Ice separation handle

Shelf

Door rack

Ice box

Door rack

Drawer

Lower cover

Lamp Shelf

Door rack(1 piece or 2 piece)

Refreshment center (Optional)

Shelf Snack corner

Shelf (Folding or Normal)

Egg box

Humidity switch

Door rack

Vegetable drawer

Wine holder (Plastic or wire)

Installation

Door removal

Remove the lower cover by lifting upward.

Pass the refrigerator laterally through access door as shown in the right figure.

Remove lower

cover

Warning

Remove the

freezer

compartment

door

Remove the

refrigerator

door

Pass the

refrigerator

1) Removing the hinge cover by loosening the screws. Separate all connection wires except for the earth line after.

2) Remove the keeper by rotating it counter clockwise (

)

and then lifting the upper

hinge up(

).

3) Remove the freezer compartment door by lifting it upward.

1) Loosen the hinge cover screws and remove the cover. Remove connection wire, if any, except for the earth line.

2) Remove keeper by rotating it clockwise () and then remove the upper hinge by lifting it up ().

3) Remove the refrigerator compartment door by lifting it up.

•

When removing the upper hinge, be careful that the door does not fall forwards.

NOTE

Ma x

FR Z T EM P RE F TEMP

M i n

Ma x

Lower cover

Lower hinge

Keeper

Connection

wires

Hinge cover

Upper hinge

Keeper

Upper hinge

Failure to do so could result in death or serious injury.

If your access door is too narrow for the refrigerator remove the refrigerator door and pass the refrigerator laterally.

Electric Shock Hazard

Disconnect electrical supply to refrigerator before installing.

Installation

Level the door by inserting flat (

type) driver into the groove of the left height adjusting

screw and rotate it to the arrow

direction

( ).

Door replacement

Mount them in the reverse sequence of removal after they pass through the access door.

Level the door by inserting flat (-type) driver into the groove of the right height adjusting screw and rotate it to the arrow

direction

().

The refrigerator doors will close smoothly by heightening the front side by adjusting the height adjusting screw. If the doors do not close correctly, performance may be affected.

Height adjustment

If the freezer

compartment door

is lower than the

refrigerator

compartment door

If the freezer

compartment door

is higher than the

refrigerator

compartment door

After leveling the

door height

1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.

2. Install accessories such as the wine corner, cover evaporating tray, etc., in their

proper places. They are packed together to prevent possible damage during shipping.

3. Connect the power supply cord (or plug) to the outlet. Don't double up with other

appliances on the same outlet.

4. Prior to use, let the appliance run for 2-3 hours. Check the flow of cold air in the

freezer compartment to ensure proper cooling has taken place. Your appliance is now ready for use.

+ 16 hidden pages