LG GL-B402RPHR Owner’s Manual

ENGLISH

FRENCH

ARABIC

P/NO : MFL68489001

Green Ion Door Cooling /
Ice Beam Door Cooling (Optional)

3

10

11

13

Lamp Replacement
Inverter On feature (Optional)

22

23

25

25

27

WARNING

Keep ventilation openings, in the appliance enclosure or in
the built-in-structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.

Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage

compartment, unless they are recommended by the
manufacturer.

The refrigerant and insulation blowing gas used in the
appliance requires special disposal procedures. When
disposal, please consult with services agent or a similarly
qualified person.

If gas used is R600a

This appliance contains a small amount of isobutane refrigerant
(R600a), natural gas with high environmental compatibility, but it is
also combustible. When transporting and installing the appliance,
care should be taken to ensure that no parts of the refrigerating
circuit are damaged. Refrigerant squirting out of the pipes could
ignite or cause an eye injury. If a leak is detected, avoid any naked
flames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
Never startup an appliance showing any signs of damage. If in
doubt, consult your dealer.

Do not use or store
inflammable materials like
ether, benzene, alcohol,
medicine, LP gas, spray or
cosmetics
near or in the
refrigerator.

It may cause
explosion or fire.

Inverter-On feature (Optional)

Minimum requirement: UPS/ Inverter
should be in ON condition having
minimum 600VA capacity along with
minimum 120Ah capacity battery
connected with the refrigerator’s
power supply socket.

Green Ion Door
Cooling / Ice
Beam Door
Cooling (Optional)

‘3’ or ‘4’

When the Freezer compartment is not enough cold in winter, adjust the control for the freezer to High

●●

(4/5/ ● / )
For achieving temperature in Freezing , Energy and Storage Test, Freezer control may be required to set at

“●” or “●●”

GREEN ION DOOR COOLING / ICE BEAM DOOR
COOLING (OPTIONAL)

SMART DIAGNOSIS (Only for Selected External Micom Models)

Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.

SMART DIAGNOSIS (Only for Selected Internal Micom Models)

Smart diagnosis function is...

Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.

How to use the function

First, call LG service center. Only use the Smart Diagnosis feature when instructed to do so by the LG
call center agent.

1. Open all the doors of the refrigerator.

2. Press the refrigerator control (REF
TEMP) button for 3 sec or more.

3. If the buzzer sounds 4 times (Frequency
of SDS Buzzer is 2000Hz, 0.2sec Off/

0.2sec On 4 times) place the phone near
the speaker hole in the top right hand
side door hinge.

5. Do not take away the telephone while
data is being transmitted.

CAUTION

The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.

6. During the data transmission for smart
diagnosis, hold the telephone 10cm
away from the speaker hole and avoid
any background noises. After inputting
SDS, SDS buzzer will ring. After
completion of the data transmission,
the consultant will explain the result of
the smart diagnosis and advice
a c c o rd i n g ly. W he n t he d at a
tr a nsmi ssion is co mple ted, the
refrigerator will be automatically turned
off and on a few seconds later.

4. Ens u r e th e mic r o phone of t he
telephone is towards the speaker hole.

Be aware!

Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be successful if the call is made from a mobile phone
with poor network reception.

LED PATTEN DURING INVERTER-ON MODE (OPTIONAL)

During the use of this feature, you will find this pattern of LED running. It is a symbol
that the product is running at basic energy requirement. One can press the button “REF
TEMP” to change the LED setting during power cuts, if needed. The LED will then show
the setting as desired. When the mode is changed from Normal supply to Inverter mode
& vice versa, the LED pattern will take some time to display the change.

LAMP REPLACEMENT

NOTE : This product applies LED Lamp which cannot be replaced

by the user. Please contact authorized service centre for
the lamp replacement.

INVERTER-ON FEATURE (Optional)

1. While using this feature, the refrigerator will work on basic requirement as required by

the product.

2. The results of the Inverter-On feature may vary depending on the number of appliances

that are running on inverter.

3. For optimum running of refrigerator during Inverter-On mode, it is recommended to

switch off the other appliances which are not in use.

4. It is recommended to confirm the quality of food items before consumption.

5. Ice cream etc. may get soften during the use of this feature, if situation arises so, it is

recommended to change the setting as per one’s choice.

23

24

SUPPLY CORD
REPLACEMENT

If the supply cord is damaged, it
must be re pl ac ed by th e
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.

Disposal of the old appliance

This appliance contains fluid (refrigerant, lubricant) and is made of
parts and materials which are reusable and/or recyclable.

All the important materials should be sent to the collection center of
waste material and can be reused after rework (recycling). For take
back, please contact with the local agency.

“(For CENELEC countries) This appliance can be used by children
aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.”

* CENELEC countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, MK, FR,
DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI,
ES, SE, CH, TR, GB

“This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.

Children should be supervised to ensure that they do not play with
the appliance.”