P/No.:MFL67225602 |
www.lg.com |
CONTENT |
|
NAME OF PARTS ....................................................................................... |
3 |
MOVEMENT & TRANSPORTATION ........................................................ |
4 |
EARTH CONNECTION .............................................................................. |
4 |
INSTALLATION .......................................................................................... |
5 |
SAFETY GUARDS .................................................................................. |
6-7 |
HOW TO USE ............................ .............................................................. |
8-9 |
BEST WAYS TO STORE FOOD ........................................................... |
10-11 |
WAYS TO DISASSEMBLE SPARE PARTS .............................................. |
12 |
TO REVERSE THE DOORS (OPTIONAL) ............................................... |
13 |
CLEANING THE REFRIGERATOR ......................................................... |
14 |
DOES THE REFRIGERATOR HAVE A MALFUNCTION ....................... |
15 |
THIS IS NOT A MALFUNCTION .............................................................. |
16 |
DISPOSAL OF YOUR OLD APPLIANCE................................................. |
17 |
2
NAME OF PARTS
Temperature Control
Lamp
Refrigerator Shelf
(2 or 3 pieces)
Egg Tray (Optional)
Multi-functional rack (4 or 5 pieces)
Fruit &vegetable |
Bottle rack |
|
compartment cover |
||
|
Fruit &vegetable compartment
Ice Tray
Freezing compartment drawer (3 or 4 pieces)
Adjustable foot
Note |
If you find some parts missing from your unit, they may be parts only |
|
used in other models. |
3
MOVEMENT & TRANSPORTATION
● BEFORE TRANSPORTATION |
● DURING TRANSPORTATION |
|
1.Remove all the food from the refrigerator, |
1. |
Hold tightly the adjustable foot at the |
secure the spare parts such as the shelves |
|
bottom of the refrigerator and the |
by adhesive tape. |
|
upper handle at the back. |
2.Fasten the adjustable foot to the direction. |
2. |
During transportation, please note |
|
|
that the refrigerator should not be |
|
|
tilted. |
|
3. When transporting to a more distant |
|
|
|
place, the refrigerator should be |
|
|
placed vertically on the vehicle. |
|
|
(Otherwise problem will exist) |
Adjustable Foot |
|
|
Note:Please fasten the adjustable foot to the direction before transportation, otherwise the floor will be scraped or the foot will be blocked from moving.
EARTH CONNECTION
Note: 1.The earth wire of this electrical appliance has been connected to the power plug ,please do not change the power plug on your own.
2.Plug your refrigerator into a standard 220V-240V household outlet,make sure the socket is properly earthed.
3.If you receive an electrical shock by touching any part of the refrigerator,you should stop using the refrigerator immediately and contact the specified maintenance service unit or the retail shop of this product at once.
ACCESSIBLITYOFSUPPLYPLUG
The refrigerator-freezer should be positioned that the supply plug is accessible for quick disconnection when accident happens.
POWER CORD REPLACEMENT
If the supply cord is damaged,it must be replaced by a special cord or assembly from the manufacturer or its service agent.
4
INSTALLATION
Installing on a firm and flat surface
-Unstable installation is the main reason of vibration and noise.
-When the refrigerator is installed unstably, it can be stabilized by adjusting the adjustable foot.
-Slightly rising the front part of the refrigerator allow you to close the door very easily.
-When installed on a carpet or floor,please put a firm mat under the refrigerator otherwise the bottom part will change colour.
Slightly rise the front part
Adjustable Foot
Keep an appropriate distance between the wall
-To ensure proper air circulation around the fridgefreezer, please maintain sufficient space on both the sides as well As top and maintain at least 2 inches (5 cm) from the rear wall.
-Asmaller gap will restrict the operation of the refrigerator,which may result in an increase in power.
Keep distance
More than 5cm rear
Installing in a less humid environment
-Do not install the refrigerator in a humid place or where water can easily be splashed.
-If the refrigerator is installed in a humid environment,it will go moldy.This will lower insulation property and cause electricity leakage
Humidity
mat
Avoid installing near heat and gas
-High temperature will lower the refrigeration and increase the power consumption.
-Installing near gas or smoke will change the surface colour of the refrigerator.
5
SAFETYGUARDS
●Please use the exclusive power socket.
-If the refrigerator uses the same power socket as other electrical appliances,the socket could be overloaded abnormally and fire may be resulted,which may cause a fire.
Use aexclusive power socket
●Please note that the back of the refrigerator should not touch the power plug.
-The power plug being pressed could be easily damaged and this may cause fire or electric shock.
●Please unplug the refrigerator first before cleaning.Do not do this with wet hands.
-This may probably cause electric shock.
●Please do not store flammable things like ether,benzene,alcohol and liquefied gas in the refrigerator.
-Flammable things like ether,benzene,alcohol and liquefied gas may cause fire.
ether |
alcohol |
|
benzene
●Please unplug the refrigerator before changing the light bulb.
-Changing the light bulb as the refrigerator
is operating may cause an electric shock.
●Please do not put heavy things on top of the refrigerator.
-When you open the door, the heavy things
could easily fall down and hurt you.
● Please do not climb on the door.
- The refrigerator could be turned over and hurt small children.
● Please do not store medicine or academic information in the refrigerator.
- Things which require strict temperature control should not be stored in the refrigerator, otherwise they will go bad or produce accidental effect.
6