CONTENT |
|
NAME OF PARTS ......................................................................................... |
2 |
MOVEMENT&TRANSPORTATION.................................. . . . . .... . . . . . . . . ......... |
3 |
EARTH CONNECTION................................................................................. |
3 |
INSTALLATION....................................................................... . . . ........ . ......... |
4 |
SAFETY GUARDS......................................................................................... |
5 |
HOW TO USE................................................................................................. |
7 |
BEST WAYS TO STORE FOOD.................................................... . .. . . . . . . ..... |
9 |
WAYS TO DISASSEMBLE SPARE PARTS......................................... . . . .... |
11 |
INSTALLING LOCATION AND REPLACEMENT OF DOOR |
|
OPENING TYPE.............................. . . . . . . . . . . ....................................... . . . . . .. |
12 |
CLEANING THE REFRIGERATOR .............................................. ............ |
13 |
DOES THE REFRIGERATOR HAVE A MALFUNCTION............ . ........... |
14 |
THIS IS NOT A MALFUNCTION................................................... . ........... |
15 |
APPENDIX....................................................................................... . ..... . . . . .. |
16 |
1
BEFORE TRANSPORTATION
1.Remove all the food from the refrigerator, secure the spare parts such as the shelves by adhesive tape.
2.Fasten the adjustable foot to the direction.
Adjustable Foot
DURING TRANSPORTATION
1.Hold tightly the adjustable foot at the bottom ofthe refrigerator and the upper handle at the back.
2.During transportation, please note that the refrigerator should not be tilted.
3.When transporting to a more distant place, the refrigerator should be placed vertically on the vehicle. (Otherwise problem will exist)
will be scraped or the foot will be blocked from moving.
Note: 1.The earth wire of this electrical appliance has been connected to the power plug, please do
not change the power plug on your own.
2.Plug your refrigerator into a standard 230V household outlet, make sure the socket is
properly earthed.
3.Ifyou receive an electrical shock by touching any part ofthe refrigerator,you should stop
the retail shop ofthis product at once.
The refrigerator-freezer should be positioned that the supply plug is accessible for quick
disconnection when accident happens.
If the supply cord is damaged,it must be replaced by a special cord or assembly from the manufacturer or its service agent.
3
Unstable installation is the main reason
ofvibration and noise.
When the refrigerator is installed unstably, it can be stabilized by adjusting the adjustable foot.
Slightly rising the front part ofthe refrigerator allow you to close the door very easily.
the bottom part will change colour.
Slightly rise the front part
Adjustable Foot
Do not install the refrigerator in a humid place or where water can easily be splashed.
Ifthe refrigerator is installed in a humid environment,it will go moldy.This will lower insulation property and cause electricity leakage
Humidity
mat
During installation,the refrigerator should be kept an appropriate distance between the wall. A smaller gap will restrict the operation of the refrigerator,which may result in an increase in
power.
High temperature will lower the refrigeration and increase the power consumption. Installing near gas or smoke will change the surface colour of the refrigerator.
4
Clean the inner part ofthe refrigerator before using.
Do not put foods into the refrigerator until it has been plugged in for 3 hours.
The thermostat used for controlling the temperature inside the refrigerator is located on the top of the refrigerator.
the higher the temperature inside the refrigerator is.
Temperature control
Position
0Stop
1-2 Warm
3-4 Normal
5-6 Cold
7Quick freezing
Turn the switch to "on" when the ambient temperature is lower than eighteen degrees centigrade,turn the switch to "off" during usual using.
Ifpower failure is known in advance,please
Turn the thermostat to "7" two hours before power failure.
Place more ice cubes in the refrigerator compartment.
Do not place anymore food in the refrigerator.
Do not open the door more than necessary.
Power failure leads to the rising of the freezing compartment's temperature, this may shorten the storage of foods and decline the quality.
Ifthe power supply is off for too long, be sure to get rid of any water or ice underside the drawer ofthe freezing compartment before reconnection ofthe power supply, so as to avoid the foods and the ice freezing together.
7