LG F1447TD01 User Manual [de]

OWNER’S MANUAL
WASHING MACHINE
F1447TD(0~9)1 F1281TD(0~9)
P/No.: MFL67685601
www.lg.com
Please read this manual carefully before operating your washing machine and retain it for future reference.
ontents
C
2
Contents....................................2
Product features.......................3
Warnings
Important safety instructions .................4
Save these instructions.........................4
Specifications...........................5
Installation
Removing packing ................................6
Removing transit bolts ..........................6
Installation place requirements .............7
Connecting water supply hose..............9
Installation of drain hose .....................11
Leveling...............................................12
How to use washer
Operating washing machine ...............14
Care before washing...........................15
Washing program table.......................16
Extra options .......................................17
Operating data ....................................18
Control panel.......................................19
Additional program..............................20
- Time Delay........................................20
- Crease Care .....................................20
- Favorite.............................................20
- Pre Wash ..........................................20
Options................................................21
- Option1 .............................................21
- Option2 .............................................21
- Temp. ...............................................21
- Rinse ................................................21
Other functions....................................21
- Rinse+Spin .......................................21
- Spin Only ..........................................21
Child Lock ...........................................22
Beep On/Off ........................................22
Tub Clean ...........................................23
Door Lock & Detecting ........................23
Thank you for buying a LG Fully Automatic Washing Machine.
Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference.
Record the model and serial number of your washing machine.
Model No. Serial No. Date of Purchase
Adding detergent
Adding detergent and fabric softener..24
Maintenance
The water lnlet filter.............................26
The drain pump filter ...........................27
Dispenser drawer................................28
The washing drum ..............................29
Cleaning your washer .........................29
Cold conditions ...................................29
Trouble shooting guide
Diagosing problems ............................30
Error messages...................................32
Using SMARTDIAGNOSISTM...............33
Terms of warranty ..................34
추가선택 예약
Inverter Direct Drive system
The advanced Brushless DC motor directly drives the drum without belt and pulley.
Low noise speed control system
By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.
Child Lock
The Child Lock prevents children from pressing any button to change the settings during operation.
More economical with Intelligent Wash system
Intelligent Wash System detects the size of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.
Built-in heater
Internal heater automatically heats the water to the best temperature on selected cycles.
Protection against creases
With the alternating rotation of the drum, creasing is minimized.
6 motion
Washer is able to perform various drum actions or a combination of different actions depending on the wash program selected. Combined with a controlled spin speed and the ability of the drum to rotate both left and right, the wash performance of the machine is greatly improved, giving you perfect results every time.
roduct Features
P
3
4
arnings
W
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
• Before installation, check exterior damages. If it has, do not install.
• Do not install or store the washer where it will be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.
• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.
• The appliance is not intended for use by young children or infirm persons without supervision. Do not allow children to play on, with, or inside this or any other appliance.
• Keep small animals away from the appliance.
• Do not leave the washer door open. An open door could entice children to hang on the door or crawl inside the washer.
• Never reach into washer while it is moving. Wait until the drum has completely stopped.
• The laundry process can reduce the flame retardant of fabrics.
• To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.
• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) which may ignite or explode. Oil may remain in the tub after a whole cycle resulting in fire during drying.
So, do not load oiled clothes.
• Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the washer.
• When the machine runs high temperature, the front door may be very hot. Don’t touch it.
• To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.
• When unplugging power cord, do not pull out by grasping the cord. Otherwise, the power cord may be damaged.
• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
• Before discarding an old machine unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.
• When a product was under water, Please call service center. The risk of electric shock and fire.
• Appliance connected to the water mains using new hose-sets and old hose-sets not be reused.
• To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property, personal injury or death.
• Do not push down the door excessively, when washer door open. This could topple over the washer.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
• Do not use an adapter or otherwise defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury to persons when using
the washer, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
WARNING :
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
Name : Front loading washing machine
Power supply : 220 - 240 V~, 50 Hz
Size : 600 mm(W)×590 mm(D)×850 mm(H)
Weight : 65 kg
Max.Watt : 2100 W
0.33 W (The off-mode, The left-on mode)
Wash capacity : 8 kg
Permissible water pressure : 100 - 1000 kPa (1.0 - 10.0 kgf / cm
2
)
󳢮The appearance and specifications may vary without notice to improve the quality
of the unit.
5
pecifications
S
Accessories
Drawer
(For detergent and
fabric softener)
Drain hose
Transit bolts
Power plug
Control panel
Drain pump filter
Lower cover cap
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.
Drum
Door
Drain plug
Adjustable feet
Inlet hose(1EA) Spanner
6
nstallation
I
Removing packing
1. Remove the cardboard box and
styrofoam packing.
2. Lift the washing machine and remove
the base packing.
3. Remove the tape securing the power
supply cord and drain hose.
4. Remove the inlet hose from the drum.
1. Unscrew the 4 bolts with
the spanner supplied.
2. Take out the 4 bolts along with the
rubber bungs by slightly twisting the bung.
3. Close the holes with the caps supplied.
Keep the transit bolts for future use.
To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction.
Removing transit bolts
Keep the spanner in base packing for leveling.
Transit bolt
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children.
Warning
Washer
Base Packing
Spanner
7
nstallation
I
Level floor :
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.
Additional Clearance :
For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls.
Installation place requirements
Positioning
Location
• Install the washer on a flat hard floor.
• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.
• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
• The washer must not be installed in rooms where the temperature can drop below 0°C.
• Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
• With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of any work-top.
• This equipment is not designed for maritime use or for use in a mobile installations such as caravans, aircraft etc.
• Do not use an extension cord or double adapter.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly
qualified person in order to avoid a hazard.
• Always unplug the machine and turn off the water supply after use.
• Connect the machine to an earthed socket in accordance with current wiring regulations.
• The appliance must be positioned so that the plug is easily accessible.
• Repairs to the washing machine must only be carried out by qualified personnel.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
• If the appliance is delivered in the winter months and temperatures are below freezing : Place the
washing machine at room temperature for a few hours before putting it into operation.
Electrical connection
Washer
approx.
2cm
8
nstallation
I
CAUTION concerning the Power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in an electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
CAUTION
The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with appliance.
CAUTION
9
nstallation
I
1. Unscrew the adapter ring plate and the 4
adapter retaining screws.
2. Push the adapter onto the end of the tap
so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.
3. Push the water supply hose vertically
upwards so that the rubber packing within the hose can adhere completely to the tap and then tighten it by screwing it to the right.
• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm
2
).
• Do not strip or crossthread when connecting inlet hose to the valve.
• If the water supply pressure is more than 1000 kPa, a decompression device should be installed.
• Periodically check the condition of the hose and replace the hose if necessary.
Type-A : Connecting Screw-type hose to tap with thread
• Screw the hose connector onto water supply tap.
Connecting water supply hose
Step1 : Check rubber seal inlet hose
Step2 : Connect hose to water tap
• Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks. Make sure the connection to taps is sufficiently tight.
Upper connector
Rubber packing
Plate
Water supply hose
Fixing screw
Hose connector
Hose connector
Rubber seal
Rubber seal
Type-B : Connecting Screw-type hose to tap without thread
10
nstallation
I
Use the horizontal tap
Horizontal tap
Extension tap
Square tap
1. Unscrew the adapter ring plate and
the 4 adapter retaining screws.
2. Remove the guide plate if the tap is
too large to fit the adapter.
3. Push the adapter onto the end of
the tap so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.
4. Pull the connector latch plate down,
push the inlet hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.
After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.
Ring plate
Guide plate
Latch plate
Type-C : Connecting one touch type hose to tap without thread
Step3 : Connect hose to washer
• Make sure that there are no kinks in the hose and that they are not crushed.
After connecting hose to water tap, turn on the water taps to remove foreign substances in the water hoses. Remove dirt, sand and sawdust remaining in the tap pipes or water hoses, let water drain into a bucket, and check the water temperature.
11
nstallation
I
Installation of drain hose
• The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly.
• Securing the drain hose correctly will protect the floor from damage due to water leakage.
• If the drain hose is too long, do not force back into the washer. This will cause abnormal noise.
• When installing the drain hose to a sink, secure it tightly with string.
• Securing the drain hose correctly will protect the floor from damage due to water leakage.
12
Diagonal Check When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all (Please, check both directions). If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
2. If the floor is uneven, turn the adjustable feet
as required. (do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level)
1. Leveling the washing machine properly
prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.
Timber or suspended type flooring may contribute to excessive vibration and unbalance.
If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.
nstallation
I
Leveling
Once the washer is level, tighten the lock nuts up towards the base of the washer. All lock nuts must be tightened.
Raise Lower
Lock Nut
Tighten all 4 locknuts securely
13
nstallation
I
Concrete floors
Wooden floors (Suspended floors)
• The installation surface must be clean, dry and level.
• Install washer on a flat hard floor.
Tile floors (Slippery floors)
• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)
• Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot under washer at least 15mm thick, secured to at least 2 floor beams with screws.
If possible install the washer in one of the corners of the room, where the floor is more stable.
Insert the rubber cups to reduce vibration.
You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.
Proper placement and levelling of the washer will ensure long, regular and reliable operation.
The washer must be 100% horizontal and stand firmly in position.
It must not “Seesaw” across corners under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
Rubber Cup
14
ow to use washer
H
Operating washing machine
2. Open the door and load laundry.
1. Sort Laundry.
(Refer to 15 page)
3. Press the Power button.
4. Select a Program.
(Refer to 16~18 page)
5. Add detergent.
(Refer to 24~25 page)
6. Press the Start/Pause button.
Select options at this time (Refer to 20~23 page)
Additional Program
Temperature
Spin Speed
Other functions
15
ow to use washer
H
Care before washing
3. Caring before loading
Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
• Check all pockets to make sure that they are empty. Items such as nails, hair clip, matches, pens, coins and keys can damage both your washer and your clothes.
• Close zippers, hooks and strings to make sure that these items don’t snag on other clothes.
• Pre treat dirt and stains by brushing a little detergent dissolved in water onto stains like collars and cuffs to help lift dirt.
• Check the folds of the flexible gasket (gray) and remove any small articles.
• Check inside of the drum and remove any item from a previous wash.
• Remove any clothing or items from the flexible gasket to prevent clothing and gasket damage.
2. Sorting
To get the best results, sort clothes into loads that can be washed with the same wash cycle. Water temperature and spin speed and different fabrics need to be washed in different ways. Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discoloration of white etc. If possible, do not wash heavily soiled items with lightly soiled one.
• Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
• Color (White, Lights, Darks) Separate white fabrics from colored fabrics.
• Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.
1. Care Labels
Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed.
Before the first washing, Select a cycle (Cotton 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing.
Wash temperature
Normal machine wash
Permanent press
Hand wash
Sort laundry by...
Soiling
Colour
Wash temperature
Fabric type
Delicate
Do not wash
16
ow to use washer
H
Cotton
Eco
Easy Care
Mix
Provides optimized washing performance with less energy consumption.
This cycle is suitable for casual shirts that do not need ironing after washing.
Enables various fabrics to be washed simultaneously.
Program
Description
Fabric type
Proper
Temp.
Maximum
Load
Cotton
Provides better performance by combining various drum motions.
Color fast garments (shirts, nightdresses, pajamas, etc) and normally soiled cotton load (underwear).
Polyamide, Acrylic, Polyester.
Various kind of fabrics except special garments. (Silk/delicate, sports wear, dark clothes, wool, Duvet/Curtains).
Baby Care
Removes solid and protein stain and provide better rinse performance.
Lightly soiled baby wear.
Silent Wash
Provides less noise and vibration and saves money by using overnight electricity.
Color fast garments (shirts, nightdresses, pajamas, etc) and lightly soiled white cotton (underwear).
Skin
Care
Removes efficiently detergent residue in clothes.
Fabrics which will be in direct contact with the skin, e.g. underwear, nappies, towelling, bed linen, pillow and mattress covers
Duvet
This cycle is for large items such as bed cover, pillows, sofa covers, etc.
Cotton bedding except special garments (delicates, wool, silk, etc.) with filling: duvets, pillows, blankets, sofa covers with light filling.
Sports
Wear
This cycle is suitable for sports wear such as jogging clothes and running wear.
Coolmax, Gore-tex, fleece and Sympatex.
Dark
Wash
If it's possible for clothes to decolorate, please use this cycle. The cycle prevent decolorization. (Please use detergent for colored fabrics.)
Dark garments made from cotton or mixed fabrics.
Delicate
This cycle is for delicate clothes such as underwear, blouse, etc.
Delicate, easily damaged laundry.
Wool
Enable to wash wool fabrics. (Please use detergent for machinewashable woolens).
Machine washable woolens with pure new wool only.
Quick 30
This cycle provides fast washing time for small loads and lightly soiled clothes.
Colored laundry which is lightly soiled fast.
Intensive
60
Within 60mins provide better washing performance and energy efficiency.
Cotton and mix fabrics. (Special PROGRAM within 60 mins for normally soiled laundry).
40°C
(Cold to 95°C)
60°C
(Cold to 60°C)
40°C
(Cold to 60°C)
40°C
(Cold to 40°C)
60°C
(95°C)
40°C
(Cold to 60°C)
40°C
(Cold to 40°C)
30°C
(Cold to 40°C)
40°C
(Cold to 40°C)
30°C
(Cold to 40°C)
60°C
(Cold to 60°C)
Rating
4.0 kg
4.5 kg
Rating
1 single
size
2.0 kg
4.0 kg
Washing program table
Recommended courses according to the laundry type.
17
Extra options
* : This option is automatically included in the cycle and can not be deleted. ** : This option is automatically included in the cycle and can be deleted.
ow to use washer
H
Water Temperature: Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing.
• Set program at "Cotton Eco 40°C + Intensive (Half Load)", "Cotton Eco 60°C + Intensive (Half Load)", "Cotton Eco 60°C + Intensive (Full Load)" option for test in accordance in conformity with EN60456. (They are the most efficient programmes in terms of combined energy and water consumptions for washing that type of cotton laundry.) * Actual water temperature may differ from the declared cycle temperature.
• The test results depend on water pressure, water hardness, water inlet temperature, room temperature, type and amount of load, degree of soiling utilized detergent, fluctuations in the main electricity supply and chosen additional options.
Neutral detergent is recommended. The wool cycle features gentle tumbling and low-speed spin for garment care.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine M1009.
Cotton
Cotton Eco
Easy Care
Mix
Baby Care
Silent Wash
Skin Care
Duvet
Sports Wear
Dark Wash
Delicate
Wool
Quick 30
Intensive 60
*
*
Time
Delay
Crease
Care
Pre
Wash
Program
Favorite
Medic Rinse
Rinse+
Spin
Time Save
Intensive
**
18
ow to use washer
H
Operating data
Energy
(kWh)
F1447TD(0~9)1 F12**
Water
(
ll
)
Max RPM Consumption data
Cotton
Cotton Eco
Easy Care
Slient Wash
Mix
Duvet
Baby Care
Skin Care
Sports Wear
Dark Wash
Delicate
Wool
Quick 30
Intensive 60
1400
1400
1000
1000
1400
1000
1000
1400
800
1400
800
800
1400
1400
1200
1200
1000
1000
1200
1000
1000
1200
800
1200
800
800
1200
1200
1.04
1.20
0.70
0.50
0.48
0.50
2.48
0.97
0.34
0.18
0.26
0.49
0.19
0.93
56
65
74
94
56
58
104
152
42
42
57
45
39
42
Program
Information of main washing programmes at half load.
Program
Time
in minutes
Remaining moisture content
1400 rpm
Water
in Liter
Energy in kWh
Cotton (40°C)
Cotton Eco (60°C)
Skin Care (40°C)
94 120 105
44 % 44 % 44 %
1200 rpm
53 % 53 % 53 %
39 49 39
0.66
0.74
0.66
19
ow to use washer
H
Power
• Press the Power button to turn power on and off.
• To cancel the Time Delay function, the power button should be pressed.
LED display
• The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.
Program dial
• Programs are available according to the laundry type.
• Lamp will light up to indicate selected program.
Additional program
• Use these buttons to select the desired cycle options for the selected cycle.
Options
• This allows you to select addition cycle and will light when select.
Start/Pause
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is
needed, press the Start/Pause button.
• When in Pause, the power is turned off automatically after 4 minutes.
Control panel
Start/Pause
button
Beep
On/Off
Power button
Tub
Clean
Child Lock
Program
dial
Rinse
Button
Spin
Button
Temp. Button
Additional program
buttonsLED displayOption Buttons
SMARTDIAGNOSIS™ function is available only for the products with a SMARTDIAGNOSIS™ mark.
20
1. Press the Power button.
2. Select a cycle.
3. Press the Time Delay button and set
time required.
4. Press the Start/Pause button.
You can set a time delay so that the washing machine will start automatically and finish after a specified time interval.
The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.
ow to use washer
H
Favorite program allows you to store a customized wash cycle for future use.
1. Press
the
Power button.
2. Select a cycle.
3. Select the course.
(Washing method, number of rinses, spin speed, water temperature etc.)
4. Press and hold Favorite program button
3 seconds.
The Favorite program is now stored for future use. To reuse the program, select Favorite program and press
the
Start/Pause.
If you want to prevent creasing, select Crease Care option.
1. Press the Power button.
2. Select a cycle.
3. Press the Crease Care button.
4. Press the Start/Pause button.
Favorite
If the laundry is heavily soiled, “Pre Wash” course is effective.
1. Press the Power button.
2. Select a cycle
3. Press the Pre Wash button.
4. Press the Start/Pause button.
Pre Wash
Time Delay
Crease Care
Additional program
21
ow to use washer
H
1. Press the Power button.
2. Select a cycle.
3. Press the Option button
(Rinse+Spin light up).
4. Press the Start/Pause.
1. Press the Power button.
2. Select the spin speed.
3. Press the Start/Pause.
When you select "No Spin", it will still rotate for a short time with low speed to drain quickly.
Rinse+Spin
Medic Rinse : For best results or for cleaner rinsing.
Rinse+Spin : This can be helpful in preventing fresh stains from setting in fabrics. This is a separate cycle.
Option1
Time Save : This option can be used to reduce the time of a wash program.
Intensive : If the laundry is normal and heavily soiled, “Intensive” option is effective.
Option2
Rinse++Hold : Add rinse once then after rinsing process, the course is paused until start button is pressed again.
Normal+Hold : The course is paused until start button is pressed again when rinse is finished.
Rinse
++
: Add rinse twice.
Rinse
+
: Add rinse once.
Rinse
• By pressing the Temp. button the water temperature can be selected.
- Cold
- 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected according to the program.
Temp. Spin Only
Options Other functions
22
The Beep on/off function can be set only during the washing cycle.
1. Press
the
Power button.
2. Press the Start/Pause button.
3. Press and hold the Option2 and Rinse button
simultaneously for three seconds to set Beep on/off function.
Once the Beep on/off function is set, the setting is memorized even after the power is turned off.
ow to use washer
H
Locking the control panel
1. Press
the
Temp. and Rinse button
simultaneously for 3 seconds.
2. A beeper will sound, and ' ' will appear
momentarily on the LED Display. When the child lock is set, all buttons are locked except for the Power button.
Select this function to lock the buttons on the control assembly to prevent tampering. "Child Lock" can be set only during the washing cycle.
Unlocking the control panel
1. Press
the
Temp. and Rinse button
simultaneously for 3 seconds.
2. A beeper will sound and the remaining time
for the current programme will reappear on the LED Display.
Turning off the power will not reset the child lock function. you must deactivate child lock before you can access any other functions.
If you want to turn off Beeper simply repeat this process
Child Lock
Beep On / Off
Loading...
+ 50 hidden pages