LG F1403TDS1, F1403TDS4, F1403TDS2, F1403TDS3, F1403TDS7 Owner's Manual

•W

ater supply is not adequate in area

ater supply taps are not completely open.
Water inlet hose(s) are kinked.

•

The filter of the inlet hose(s) are clogged.

• Drain hose is kinked or clogged.

• The drain filter is clogged.

• Load is too small
.

• Load is out of balance.

The appliance has an unbalance detection

and correction system. If individual heav

y
articles are loaded (ex. bath mat, both robe,

etc.), this system may stop spinning or even

interrupt the spin cycle altogether.
If the laundry is still too wet at the end of the

cycle, add smaller articles of laundry to

balance the load and repeat the spin cycle.

• Is the door opened or not

completely closed?

•

Water overfills due to the faulty water
valve.

•

Water level sensor has malfunctioned.

• Over load in motor.

Water leaks

• The washer experienced a power failure.

Check another tap in the house.

Fully open tap.

Straighten hose(s)
Check the filter of the inlet hose(s)

Clean and straighten the drain hose.
Clean the drain filter.

For more detailed information,

please refer to

Cleaning the drain pump filter

”

Add 1 or 2 similar items to help
balance the load.

Rearrange load to allow proper

spinning
Close the door completely
.

If “ ”is not released, call for service

Unplug the power plug and call for service.
Close the water tap.

Unplug the power plug.
Call for service

Call for service

Restart the cycle.

4

1

2

3

7

1 2

3 4

6

60 - 100 cm

@

N

Adjustable feet

Adjustable feet

CAUTION

The appliance is not intended for use by young children or infi rm persons without supervision.
Young Children should be supervised to ensure that they do not play with ap pliance.

Disposal

• W hen this crossed-out whee led bin symbol is attached t o a product it means the produc t is
covered by European Directive 2002 /96/EC.

• A ll electrical and electro nic products should be disp osed of separately from mun icipal
waste stream via designated collection f acilities appointed by the go vernment or the local
authorities.

• T he correct disposal of your ol d appliance will help prevent pote ntial adverse consequenc es
for the environment and human health.

• Fo r more detailed informatio n about disposal of your old app liance, please contact you r city
offi ce, waste disposal service or the shop where you purchased the p roduct.

BS Plug Safety Details (For U.K. User)

This appliance must be earthed As the colours of the wires in the mains lead of
this apparatus may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows: The green and yellow wire must be
connected to the terminal in the plug marked E or by the earth symbol or

coloured green or green and yellow. The wire coloured blue must be connected to
the terminal marked with the letter N or coloured black. The wire coloured brown must be connected to the terminal
marked with the letter L or coloured red. If a 13 amp (BS 1363) plug is used, fi t a 13 amp BS 1362 fuse.

Owner‘s Manual

F1403TDS(1~9)
F1203TDS(1~9)

Safety inst ructions f or use

Read all instructions and explanations of the i nstallation before use. Fo llow the instructions care fully. Keep the
operating instructions handy for later use. I f the appliance is sold or passed on then ens ure that the new owner
always receives these operating instr uctions. The following wa rnings must be strictl y observed for safet y rea­sons. They must be read before installing t he appliance and putting it in to operation.

• Intende d use: This appliance has been designed exclusively for use in dr y-interior households. Use the appliance o nly
with cold drinking water and only for washing textiles with washing detergent s designed for washing machines. Every
other use is improper and may lead to injuries, whereby the liability of the manufacturer will c ease.

• This ap pliance may only be used by adults. Do not allow children to touch the c ontrols or to play with the product.

• Never mod ify the appliance on your own, as this is dangerous.

• This ap pliance is heavy. Transporting with care.

• Remove all pac kaging and transport bolts before using t he appliance. Otherwise serious damage may resul t.

• All inst allation work must be carried out by a qualifi ed fi tter or technician.

• Have elec trical connections done by a qualifi ed electrician.

• Never plac e the appliance on the power cord.

• If the a ppliance is placed on a carpet then place the feet so tha t air can circulate underneath the appliance.

• Always u nplug the machine and turn off the water supply after u se. Disconnect appliance by pulling only the plug

- never disconnect by pulling the power cord. Never touch the plug with wet fi ngers or hands.

• Do not over load the appliance.

• Wash only machin e-washable textiles. If you have doubts regardin g this, then observe the markings on the labe l.

• Never plac e electrical heaters, candles etc. in the vicinit y of the appliance. They could cause the appliance t o ignite or
parts to warp.

• Protec t the appliance from wet and damp. Otherwise, the re is danger of electric shock and fi re.

• Conne ct the appliance to a suitable wall socket for 22 0-240V. Never use an extension cord or double adapter.

• Empt y all pockets. Hard or sharp objects such a s coins, needles, nails, screws or stones may cause seriou s damage.
Unbalanced mass may create heavy vibrations. If heavy vibratio ns remain also without load, call for an authorized
customer service.

• Do not was h or dry articles that have been cleaned in, washe d in, soaked in, or dabbed with combustible or explosi ve
substances (such as wax, oil, paint, gasoline, degreasers, dry-cl eaning solvents, kerosene, etc.). This may result in
fi re or explosion.

• Never inse rt products coated with mineral oils (e.g. nylon coa ting, plastic belts, etc. ) into the machine. If a stain re ­mover has been used then make sure that the solvent has been carefully washed out befo re inserting the clothes into
the appliance. Oil may remain in the tub after a whole cycle resulting in fi re during drying. So, do not load oily clothes.

• Do not op erate the appliance at locations where fl ammable substances are present such as oil, benzene or highly
infl ammable gas. Such materials may cause fi re or explosion. Never use combustible detergents.

• Only add t he prescribed amount of softener. Excessive amount s may damage the clothes.

• Af ter washing, keep the drum door open to protect the do or seal.

• Make sure t hat all water has run off before opening the door. Never open th e door if water still remains. Danger of
scalding.

• Animals a nd children may get into the washing machine. So always check the applian ce before using it.

• During wa shing, the glass door becomes very hot. Keep chil dren away from the appliance when in operation.

• Never tr y to repair the machine yourself. Incorrect repair s may result in injuries and/or serious defects to the mac hine.

• The pro duct should be serviced and repaired only by th e authorised customer service using original re placement
parts.

• When dis posing of your old machine, the power cable must be capped and t he door lock must be made unusable in
order to protect children.

• When plac ing on a carpeted fl oor, make sure that the opening in the socket is not blocked.

• If the a ppliance has been under water then contact the cus tomer service. There is danger of electric sho ck and fi re.

• The cove r cup of the fi lter as well as the dispenser drawer may not be opened during the operation.

• Keep all was hing powder and detergents away from children. Danger of poiso ning

Before use please read carefully the safety instructions!

Thank you for buying an LG fully automa tic washing machine.

Please read this owner‘s manual ca refully, it provides inst ructions on safe inst allation, use and main tenance.

Keep it handy for future reference of t his machine. Make a note of the mo del and serial number s of your washing machine.

Remove Packaging

Requirement s for insta llation site

Transit bolts

Electrical c onnection

• The appliance is fi tted with transit bolts to prevent internal
damage during transport. Be careful, heavy load!

• Packing and all transit bolts must be removed before using
the washing machine.

• When unpacking the base, be sure to remove the additional
packing support in the middle of the base packing.

Store original packing for future move.
Dispose of packing material according to local regulations.

Unscrew the 4 bolts
using the spanner
supplied.

Keep the 4 bolts and the spanner for the future use. Refi t transit bolts before transporting the appliance.

Level fl oor: Permissible fl oor gradient under entire washing machine
is 1˚ .

Power socket: Must be within 100 cm of either side of location of
washing machine. Do not overload the socket with more than one
appliance.

Additional Clearance: For wall, fl oor and door space is needed.
(10cm: rear / 2cm:right & left side). Do not place or store laundry pro­ducts on top of the washing machine at any times. They can damage
the fi nish or controls of the machine.

1. Do not use an extension cord or double adapter.

2. Have damaged supply cords replaced by the manufacturer or its service agents or a similarly qualifi ed person
to prevent danger.

3. Always unplug the machine and turn off the water supply after use.

4. Connect the machine to an earthed socket in accordance with current wiring regulations.

5. The appliance must be positioned so that the plug is easily accessible.

• Repairs to the washing machine must only be carried out by qualifi ed personnel. Repairs carried out by inexpe-
rienced persons may cause injury or serious malfunctioning. Contact your local service centre.

• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst
under pressure. The electronic control unit may become unreliable at temperatures below freezing point.

• If the appliance is delivered in the winter months and temperatures are below freezing: Leave the washing machine
standing at room temperature for a few hours before putting it into operation.

• The drain hose should not be placed higher than 100 cm above the fl oor.

• Proper securing of the drain hose will protect the fl oor from damage due to any water leakage.

• If the drain hose is too long do not force back into the washing machine. This w ill cause unusual noise.

• Proper level-adjustment of t he washing ma­chine prevents excessive noise and vibration.
Install the appliance on a solid and level fl oor
surface, preferably in a corner of the room.

• If the fl oor is uneven, adjust feet as required.
(Do not insert pieces of wood etc. under the
feet). Make sure that all four feet are stable
and resting on the fl oor. Then check that
the appliance is perfectly level. (Use a spirit
level).

Safety inst uctions fo r the install ation

Install or store appliance where it will not be exposed to sub-zero temperatures or exposed to the weather. Fit ground of the
washing machine correctly to conform with all statutory regulations and ordinances. Ensure that the base opening is free from
obstruction by carpeting if the washing machine is installed on a carpeted fl oor. In countries where there is a risk of cockroach
infestation or other vermin, pay particular attention to keep the appliance and its surroundings in a clean condition at all times.
Any damage which may be caused by cockroaches or other vermin is not covered by the appliance guarantee.

CAUTION about positioning the applianc e

Install the washing machine on a fl at hard fl oor. Make sure that air circulation around the washing machine is
not impeded by carpets, rug etc.

•

Never try to correct any unevenness in the fl oor using pieces of wood, cardboard or similar materials under the washing machine.

•

If it is not possible to position the washing machine away from a gas cooker or coal burning stove, an insulation panel
(85x60cm) covered with aluminum foil on the side facing the cooker or stove, must be inserted between the two appliances.

•

The washing machine must not be installed in rooms where the temperature may drop below 0°C.

•

Please ensure that when the washing machine is installed an engineer can gain easy access in the event of a breakdown.

•

Adjust all four feet using the transit bolt spanner provided to ensure that the appliance is stable, with 20mm clearnace between
the top of the washing machine and underside of the worktop.

CAUTION about the power cord

We recommend connecting most appliances to a dedicated circuit. That is, a single outlet supplying power only to the appliance
concerned, without any additional outlets or branch circuits. Check the specifi cations of this owner‘s manual. Do not overload
wall sockets. Overloaded wall sockets, loose or damaged wall sockets or extension cords, frayed power cords, damaged or
cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fi re. Periodically examine the
cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, squashed in a jamb of a door, or walked upon. Pay particular atten-
tion to plugs, wall outlets, and the point where the cord exits the appliance. We recommend to use a residual current operated
device in the mains supply.

CAUTION about location and moving

This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stop-
cock if the machine is to be left for any length of time (e.g. if you are going on holiday), especially if there is no fl oor drain (gully)
in the immediate vicinity. If relocating the appliance use the original packing material. Disable the door lock to prevent young
children becoming trapped inside. Packaging material (e.g. plastic fi lm, Styrofoam) can be dangerous for children. There is a risk
of suffocation! Keep all packaging well away from children.

CAUTION about the fl oor surface

• The installation surface must be clean, dry and level.

• Install washing machine on a fl at hard fl oor.

• Proper placement and levelling of the washing machine ensure long, regular and reliable operation.

• The washing machine must be perfectly level and fi rmly in position.

• It must not “see-saw” across corners under load.

• The installation surface must be clean, free from fl oor wax and other lubricant coatings.

• Do not allow the feet of the washing machine to get wet. If feet of the washing machine get wet, slipping may occur.

Name of product Front loading washing machine

Power supply 220~240 V~, 50 Hz

Size WxDxH mm: 600 x 590 x 850

Weight 63 kg

Max. Watt

2100 W (Wash) / 1100 W (Steam)

Wash capacity 8 kg

Water consumption 52 ℓ (6.5 ℓ / kg)

Permissible water pressure 1.0-10 bar (100-1000kPa)

Rattling and clanking noise Extraneous objects such as coins or safety pins maybe in dr um or pump.
Thumping sound Heavy wash loads may produce a thumping sound. This is usually normal.
Vibrating noise Have all transit bolts and packing been removed?
Water leaks. Check and tighten hose connections. Unclog drain pipe.

Contact plumber if necessary.

Excessive suds Too much deter gent or unsuitable detergent.
Washing machine does not start Power cord may not be plugged in or connection may be loose.
Washing machine won’t spin Check that the door is fi rmly shut.
Door does not open Once started, the door can not be opened for safety reaso ns.

Wait one or two minutes before opening the door to allow the electric
locking mechanism time to release.

Troubleshooting

Level adjustm ent

To prevent internal dama­ge during transport, the
special 4 bolts are locked.
If they are not removed, it
may cause heavy vibrati­on, noise and machine to
malfunction.

Installation of drain hos e

Technical Speci fi cation

i

i

5

Connecting wa ter supply h ose

• Two rubber seals are supplied with the water inlet hoses. They ar e used for preventing water leaks.

• Make sure the connection to taps is tight enough.

• Periodically check the condition of the hos e and replace the hose if necessary.

• Make sure that there is no kink on the hose and that it is not c rushed.

Water supply pressure must be between 1.0-10 bar (100kPa~1000kPa)

Don’t strip or crossthread when connecting inlet hose to the valve.

If the water supply pressure is more than 1000kPa, a decompressio n
device should be installed.

If after completing connection water leaks from the hose, repeat th e same steps. Use the most conventional
type of tap for water supply. In case the faucet is square or too big, remove the spacing ri ng before inserting
the tap into the adaptor.

i

The hose supplied with the machine must be used. O ld hoses may not be reused

Close the holes with
the caps supplied.

Remove the 4 bolts
along with the rubber
bungs by slightly
twisting the bung.

P/No. :MFL59755582

For the U.K. customer

CUSTOMER SERVICES Tel. : [phone] LGLG(5454) Fax. : [phone]

LGEUK SERVICE WEB-SITE : http://www.lge.co.uk

1

2

3

B

A

C

A B C

1 2 3 4 5

1 3

Program

Fabric Type

Water Temp.

(Option)

Cotton

Lightly soiled clothing and
small loads

40

°C

(Cold,

30°C, 60°C)

Cotton, underwear, pillow
covers, bed sheets,
baby wear

Cotton
Quick

Synthetic

Baby Care

Allergy

Care

Delicate

Quick 30

Refresh

Hand Wash

/Wool

Color fast garments (shirts,
nightdresses, pajamas...)and
lightly soiled white cotton
(underwear)

Polyamide, Acrylic, Polyester

Lightly soiled baby wear

Delicate laundry easily
damaged

“Hand wash” marked delicate
and wool laundry

Colored laundry which is lightly
soiled fast

Cotton mixed, Polyester mixed
Dress shirts, blouses

- Time Delay

- Steam Default

- Intensive

- Crease Care

- Time Delay

- Steam Wash

- Intensive

- Soak

- Pre Wash

- Crease Care

- Rinse+Spin

- Medic Rinse

- Rinse+Spin

- Medic Rinse

- Time Delay

- Intensive

- Crease Care

- Rinse+Spin

- Steam Default

60°C
(Cold, 30°C,
40°C, 95°C)

Less than 6.0kg

Less than 4.0kg

Less than 4.0kg

Rating

Less than 4.5kg

Less than 3.0kg

Less than 2.0kg

3 items

40°C (Cold,

30°C, 60°C)

30°C

(Cold, 40°C)

30°C

(Cold, 40°C)

40°C

(Cold, 30°C)

No Choose

60°C

(40°C, 95°C)

60°C

Maximum Load

Option

1 2 3 4 5

5

2

1 2 3 4 5

4

[F1203TDS(1~9 )] [F1403TDS(1~9 )]

INSERT PLU S INTO THE MA INS SOC KET

Nev er touc h the plu g with w et hands !
Nev er remov e the pl ug from t he
soc ket by pu lling on the cor d.

HANG UP WA STE WATE R HOSE

Hose elbow c onnecti on e.g. at tach to w ater ta p

WATER CONNE CTION

Turn on the wat er tap

CHECKING T HE MAC HINE

Never use a d efectiv e machin e! In ca se of any
failure, fir st unplu g the mac hine an d turn o ff the
water

tap.

DOING LAU NDRY AN D USIN G MACHI NE
WITH CARE

- empty all p ockets

- remove all m etal pa rts

- place the d elicate textil es into t he laund ry net

- close zipp ers

WATER TREAT MENT

- with hardn ess III water

- use water s oftenin g agent

DRUM CARE

- remove ext raneous objects

- leave door open to d ry the drum

- check the r ubber s eals reg ularly

ECOLOGICA L WASHI NG

- make use of the max. washin g quanti ty

- do not “pre wa sh” if po ssible

- use short program if possi ble

LAUNDRY W ITH DI FFEREN T AMOU NTS OF
SOILING

Sort the lau ndry

note washing instru ction s ymbols -

Degree of soi ling -

Type of textil e / colo ur -

Fill the drum

Check the fo lds of th e flexib le gask et (grey) -

and remove an y small articl es, if a ny. .
Check inside of the d rum and remove ­any left in i tems for next wa sh cycl e. .

Remove any cl othing o r items on the f lexible gasket -

to prevent c lothing and the gasket d amages .

Fill detergen t

Refer to the

written in formati on

on the deterg ent's pa cking

Turn the machin e ON

by pressing the Powe r butto n

Select a

Program

Select the

Spinning spee d

Select an Op tion

Pre Wash / Soa k / Crea se Care / Rinse + Spin

Select Rinse mode

and Washing t emperatu re

4 additional programs

Press Star t / Pause
to start th e washi ng proce ss

Turn off tap

- Close water supply

- Clean the m achine

- Unplug mach ine

Additional S teps

- Turn the mac hine off

- Leave door o pen to
allow drum to dry

Remove laundr y

- Open the do or

- Remove the laundr y

W

a

it

u

n

t

i

l

w

a

s
h

i

ng

i

s

f

i

n

i

s

h

e

d

Time Delay / Steam Wa sh / Inte nsive / Medic Ri nse

Main Wash

For very di rty cl othes fi ll 1/4 of the
portion of deterge nt in here and
select a prew ashing programm

Softener

Do not exceed the MA X-Level.
Highly dens ed softe ners ar e to
be diluted w ith some water.

Pre Wash

For normal d irty c lothes u se a sma ll
amount of det ergent. D on't pre wash.
Mount the le vel plat e to use f luid det ergents .

Dry fl at

Do not bleach

Handy to bleach

Do not tumble dry

Hang to dry

Drip dry

Medium hot ironing

Hot ironing

Do not iron

Washing temperature

Do not wash

Luke warm ironing

Turn off the w ater
tap

Unscrew the water
inlet hose

Pull out the water
inlet filter

Clean the f ilter us ing
a hard brist le brus h

Pull out the
dispenser d rawer

Clean the di spense r
drawer under flow­ing water

Clean insid e the
recess with an old
toothbrush

Insert the dispens er
drawer

Cleaning the w ater inlet fi lter

Cleaning the d ispenser dra wer

Open the low er cover
cap. Drain pl ug to
pull out the hose

Unplug the d rain plu g.
Then open th e filte r
by turning t o the lef t

Remove any
extraneous matter
from the pum p filter

After clea ning, tur n
the pump fil ter and
insert the drain pl ug

Time Delay

Setting “Tim e Delay” d etermines when machi ne stops.

How to set “Ti me Delay”

- Press Power button.

- Turn the Prog ram dial to sele ct the pr ogram yo u requir e.

- Press Time D elay but ton and set time required .

- Press the S tart/ Pause b utton.

Intensive

If the laundr y is heavil y soiled “ Intensiv e”option is effecti ve.

- By selecti ng the I ntensiv e option, the was hing du ration m ay be ext ended,
depending on the pr ogram se lected.

- To use this o ption, pr ess the intensi ve butt on once before t he wash p rogram i s star ted.

Medic Rinse

For best resul ts or fo r cleaner r insing, s elect the “Medic Ri nse” optio n.

Available in the Cot ton, Cot ton Qui ck, Synt hetic, B aby Car e, and

Allergy Care

programs.
Medic Rinse is set by default in the B aby Care program.
The respect ive temp erature indicat or will l ight up.

Steam Washing a nd Refresh cycle

Steam Wash is

- For heavil y stain ed cloth es, unde rwear, or baby cl othes.

- Steam Wash is avail able wit h the C otton, C otton Q uick, Sy ntheti c, Baby C are, and A llergy Care pro grams.

- Refresh cy cle is al ways St eam was h.

- Do not load d elicate s such a s wool, s ilk, and easily discolo red clot hes.

Program Temperature Program Temper ature

Cotton

Cold, 30°C, 40°C, 60°C, 95°C

Baby Care 40°C, 60°C, 95° C

Cotton Quic k Cold, 30°C, 4 0°C, 60°C Refres h No choose

Synthetic Co ld, 30°C, 40 °C, 60°C Allerg y Care 6 0°C

How to use Ref resh Cycl e

Spinning cycle

Temperature

Rinse

OptionsStart / PauseProgram Cycle

Power button

Drum

Dispenser
drawer

Cover cap

Control pan el

Washing program table

Additional pro grams

Child Lock

Tub Clean

To activate:

press and ho ld
the Option b uttons
simultaneo usly

To deactivate:

press and ho ld
the Option b uttons
simultaneo usly

Change to the d esired pr ogram, wh ilst in chi ld lock mo de:

Empty the d rum
completly a nd close
the door

Add anti-lime scale
(Calgon) to t he main
wash compar tment.
Close the di sp. drawe r

Power ON wit h
Then press a nd
hold Rinse a nd
Temp. button

Press the
Start/ Pa use
button to st art Tub
Clean proce ss

After the c ycle is
complete, lea ve the
door open to dry

Select this fun ction t o lock th e butto ns on the contro l panel a nd to pre vent tam pering.

Press and ho ld
the Option b uttons
simultaneo usly

Press
Start/Pa use

Select the d esired
program

press
Start/Pa use

TUB CLEAN is speci al cycle to clean the insi de of the washing machine.
A higher water le vel is us ed in thi s cyle at higher s pin spee d. Perf orm thi s cycle r egular ly.

Preparation

lightly

heavily

Tighten up t he inlet
hose

Cleaning the d rain pump fi lter

Close the lo wer
cover cap

Washing symbols

Dispenser dra wer

Once you
have finished
cleaning, repla ce
the drawer and
run a rinse cyc le
without laundr y.

Cleaning and Ma intenance

Warning: Befo re cleanin g the wash ing machin e interior, unplug the electri cal power c ord to av oid the ri sk of elec tric sho ck.

DisplayAdditional pro grams

Steam Cycle

Note:

To use programs in the
Steam-Cycle, please press
first the “S team Was h” butt on
(see additio nal prog rams).

Refresh Allergy Care Baby Care Cotton Synthet icCotton Quick

1

6 3 sec.

6 3 sec.

Exterior
Proper care o f your wa shing m achine c an exte nd its s ervice life. Th e
outside of t he machi ne can b e clean ed with warm wat er and a neutra l
non-abrasive househ old dete rgent. Im mediate ly wipe o ff any s pillage.
Wipe with da mp clot h. Avoid st rikin g the sur face w ith sha rp objec ts. Neve r
hose down th e machin e!

Interior

Dry around the wash ing mach ine doo r
opening, flex ible ga sket and door gla ss.
Run washing machine through a comple te
cycle using hot water. R epeat pr ocess i f
necessar y.

Cleaning in ge neral

Important: D o not use methyl ated spi rits, so lvents or simil ar produ cts.

Water Temperat ure: Sele ct water tempera ture to suit was h cycle s. Alway s follow garment manufac ture’s ca re labe l or inst ructio ns when washing.
Intensive: If the lau ndry is heavil y soiled “Intens ive” opti on is ef fectiv e.

Set program a t “Cotto n 60°C + S team Was h + Inten sive” opt ion for t est in a ccordan ce or in conform ity wi th IEC60 456 and E N60456.

Pre Wash: If t he laun dry is h eavily soiled, “ Pre Wash” C otton i s recomm ended. P re Wash is availa ble in t he Cotto n, Cotto n Quick, Synthe tic, and Baby Ca re progr am.
Crease Care: If you w ant to pr event cr easing, s elect C rease Ca re optio n.
Medic Rinse: F or best results or for c leaner r insing, you can choose M edic Rin se opti on. Medic Rinse i s set by d efault i n the Ba by Care p rogram.

6 3 sec.

By pressing the Ste am Wash b utton, S team Fu nction c an be s elected.
When Steam F unction is sele cted, Ste am wash (

ow to use washer

H

By pressing the Steam Wash button, Steam
Function Can be selected.
When Steam Function is selected, Steam wash
( ) LED lights on.

2. Steam Wash

4. Medic Rinse

• For high effectiveness or more purity in rinse
operation you can choose Medic Rinse option.

3. Intensive

• If the laundry is heavily soiled “Intensive”
option is effective.

• By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.

• To use this option, press the intensive button
once before the wash program is started.

) LED lights up.

Steam Washing features enhance wa shing per formance with low
energy consump tion. Ref resh cycle reduces creases in clothes .

Select the R efresh
program

Load 3 items o r less
and close th e door

Press the St eam Wash button repeate dly unt il the
required and correc t number of items is displ ayed

Press the
Start/Pa use
button

2 41

The Beep on/of f functi on can be set only d uring the washing cy cle.

To set the Beep O n/Off f unction f ollow the below ste ps.

1. Turn on the washing machine (by press ing the Po wer butt on).

2. Press the St art/ Pause bu tton.

3. Press and hold the Op tion and R inse but ton simult aneously for three seconds t o set Bee p on/off
function.

Once the Beep on/off f unction is set, the setting i s memorize d even af ter Power i s off.

Beep on / of f

3

The wool was h cycle of this m achine h as been approve d by Woolm ark for the wash ing of ma chine wa shable Woolmar k product s provi ded that the pro ducts a re
washed acco rding to the ins tructi ons on t he garme nt labe l and th ose issu ed by th e manuf acturer of this w ashing machine M0806.

Notes

Neutral de tergent i s recomm ended. T he wool c ycle fe atures g entle tu mbling a nd low-sp eed spi n for gar ment ca re.

Warning: Keep all was hing powd er and d etergent s away f rom chil dren. Dan ger of po isonin g

2

6 3 sec.

- wash new textil es sepa rately

- do not pre wash

- pretreat dirty spots

- pre wash