CIRCUIT DIAGRAMS
No Power
BD101, R101 is Defective
S/W Error
IC101 is Defective
Switching Error
IC102, IC103 are Defective
No Power
D102 is Defective
33VA No Power
D126 is Defective
No Power
F101 is Defective
3.8VA No Power
D127 is Defective
5V No Power
D125 is Defective
-28VA No Power
D122 is Defective
FD(+)FD(-) No Power
D121 is Defective
5V No Power
IC156 is Defective
5.3VA No Power
D128 is Defective
13.5VA No Power
D124 is Defective
12V No Power
IC155 is Defective
1. SMPS CIRCUIT DIAGRAM
IMPORTANT SAFETY NOTE :
WHEN SERVICING THIS CHASSIS, UNDER NO CIRCUMSTANCES SHOULD THE ORIGINAL DESIGN BE
MODIFIED OR ALTERED WITHOUT PERMISSION
FROM THE LOEWE. ALL COMPONENTS SHOULD BE
REPLACED ONLY WITH TYPES IDENTICAL TO
THOSE IN THE ORIGINAL CIRCUIT. SPECIAL COMPONENTS ARE SHADED ON THE SCHEMATIC FOR
EASY IDENTIFICATION. THIS CIRCUIT DIAGRAM MAY
OCCASIONALLY DIFFER FROM THE ACTUAL CIRCUIT USED. THIS WAY, IMPLEMENTATION OF THE
LATEST SAFETY AND PERFORMANCE IMPROVEMENT CHANGES INTO THE SET IS NOT DELAYED
UNTIL THE NEW SERVICE LITERATURE IS PRINTED.
1. Shaded( ) parts are critical for safety. Replace only
with specified part number.
2. Voltages are DC-measured with a digital voltmeter during Play mode.
3-39 3-40