LG DV298H-NH Owner’s Manual

DV298H-NH.HA1CLLB_ENG

http://www.lg.ca

DVD PLAYER

OWNER’S MANUAL

MODEL: LDA-831

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.

The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.

CAUTION:

This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most devices should be placed on a dedicated circuit;

That is, a single outlet circuit which powers only that electronic device and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

2

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1.Read these instructions. - All these safety and operating instructions should be read before the product is operated.

2.Keep these instructions. - The safety, operating and use instructions should be retained for future reference.

3.Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.

4.Follow all instructions. - All operating and use instructions should be followed.

5.Do not use this apparatus near water. – For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water.

6.Clean only with dry cloth. – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.

7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over-heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3

Contents

Introduction . . . . . . . . . . . . . . . . . .5-8

About the Symbol Display . . . . . . . . . . . . .5 Symbol used in this Manual . . . . . . . . . . . . . .5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5

Handling Discs . . . . . . . . . . . . . . . . . . . . . . .5 Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .5 Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . .5

Types of Playable Discs . . . . . . . . . . . . . . . . .6 Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .6 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8

Remote Control Operation . . . . . . . . . . . . . .8 Remote Control Battery Installation . . . . . . .8

Installation and Setup . . . . . . . . .9-15

Setting up the Player . . . . . . . . . . . . . . . . . . . .9 DVD Player Connections . . . . . . . . . . . . . . . . .9

Video and Audio Connections to Your TV . . .9 Resolution setting . . . . . . . . . . . . . . . . . . . . .9 HDMI connection . . . . . . . . . . . . . . . . . . . .10

Audio Connection to Optional Equipment . .11 Displaying Disc Information On-Screen . . . .12 Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .12

General Operation . . . . . . . . . . . . . . . . . .		.12
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .		13
• Menu Language . . . . . . . . . . . . . . . . . . .		13
•	Disc Audio / Subtitle / Menu . . . . . . . . . .	13
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .		13
•	TV Aspect . . . . . . . . . . . . . . . . . . . . . . . .	13
•	Display Mode . . . . . . . . . . . . . . . . . . . . .	13
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .		14
•	Dolby Digital / DTS / MPEG . . . . . . . . . .	14
•	Sample Freq. (Frequency) . . . . . . . . . . .	14
•	DRC (Dynamic Range Control) . . . . . . . .	14
•	Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . .	14
LOCK (Parental Control) . . . . . . . . . . . . . .		14
•	Rating . . . . . . . . . . . . . . . . . . . . . . . . . . .	14
•	Password . . . . . . . . . . . . . . . . . . . . . . . .	14
• Area Code . . . . . . . . . . . . . . . . . . . . . . .		15
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .		15
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .		15
•	B.L.E. (Black Level Expansion) . . . . . . . .	15
• DivX(R) VOD . . . . . . . . . . . . . . . . . . . . .		15

Operations . . . . . . . . . . . . . . . .16-21

General Features . . . . . . . . . . . . . . . . . . . . . .16 Additional Features . . . . . . . . . . . . . . . . . . . .17 Playing an Audio CD or MP3/WMA file . . . . .18 Programmed Playback . . . . . . . . . . . . . . . . .18

Repeat Programmed Tracks . . . . . . . . . . . .18 Erasing a Track from Program List . . . . . . .18 Erasing the Complete Program List . . . . . .18

Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .19

Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .19 Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .19 Moving to another File . . . . . . . . . . . . . . . .19 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Rotating the picture . . . . . . . . . . . . . . . . . .19 Listening to MP3/WMA music while watching picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Playing a DivX Movie file . . . . . . . . . . . . . . .	20
Playing a DVD VR Format Disc . . . . . . . . . . .	21
Playing an USB Flash Drive . . . . . . . . . . . . .	21

Reference . . . . . . . . . . . . . . . . . .22-24

Controlling other TV’s with the Remote Control 22 Maintenance and Service . . . . . . . . . . . . . . . .22 Language Codes . . . . . . . . . . . . . . . . . . . . . . .23 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .24 Specifications . . . . . . . . . . . . . . . . . . . . . . . . .24

4

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference.

This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location.

About the Symbol Display

“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific Disc.

Symbol Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

ALL All discs and file listed below

DVD and finalized DVD±R/RW

Video CDs

Audio CDs

MP3 files

WMA files

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static

<![if ! IE]>

<![endif]>Introduction

<![if ! IE]>

<![endif]>Operation Installation and Setup

<![if ! IE]>

<![endif]>Reference

5

Types of Playable Discs

DVD

(8 cm / 12 cm disc)

Video CD (VCD/SVCD) (8 cm / 12 cm disc)

Audio CD

(8 cm / 12 cm disc)

In addition, this unit plays DVD±R/RW and CD-R/RW, Dual disc, USB Flash Drive that contains audio titles, DivX, MP3, WMA, and/or JPEG files.

This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format.

Notes:

•Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs may not be played on the unit.

•Do not use irregularly shaped CDs (e.g., heartshaped or octagonal) since they may result in malfunctions.

•This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled as the same as the rear of the unit or “ALL”.

Notes on Regional Codes

•Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play.

•If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen.

Notes on Copyrights:

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

The Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

6

Front Panel

a

b

	c	d	e f	g h
a POWER			c Disc Tray
Switches the unit ON or OFF.			Insert a disc here.
b •	N (PLAY)		d Display window
	Starts playback.		Shows the current status of the unit.
•	x (STOP)		e Remote Sensor
	Stops playback.
			Point the Remote Control here.
•	. (SKIP)		f USB
	Returns to the beginning of current chapter or
			Connect an USB Flash Drive.
	track or go to the previous chapter or track.
•	> (SKIP)		g Z (OPEN / CLOSE)
	Go to the next chapter or track.		Opens or closes the disc tray.

h RES.

Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.

<![if ! IE]>

<![endif]>Introduction

<![if ! IE]>

<![endif]>Operation Installation and Setup

<![if ! IE]>

<![endif]>Reference

7

Remote Control

POWER(1)

Switches DVD Player ON and OFF.

OPEN/CLOSE (Z)

Opens and closes the disc tray.

0-9 numerical buttons

Selects numbered items in a menu.

CLEAR

Removes a track number on the

Program List or a mark on the

Marker Search menu.

TV Control Buttons

POWER: Turns the TV on or off.

AV: Selects the TV’s source.

PR/CH +/–: Selects TV’s channel.

VOL +/–: Adjusts TV’s volume.

DVD MENU

Accesses menu on a DVD disc.

TITLE

Displays title menu, if available.

b / B / v / V (left/right/up/down)

Selects an item in the menu.

ENTER( )

Confirms menu selection.

DISPLAY

Accesses On-Screen Display.

RETURN (O)

Hide the help menu while watching a JPEG file.

AUDIO()

Selects an audio language or an audio channel.

SUBTITLE()

Selects a subtitle language.

ANGLE()

Selects a DVD camera angle, if available.

SETUP

Accesses or removes the Setup menu.

Remote Control Operation

Point the Remote Control at the remote sensor and press the buttons.

Caution:

Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc.

SCAN (m / M)

Search backward or forward.

SKIP (. / >)

Go to next chapter or track. Returns to the beginning of current chapter or track or go to the previous chapter or track.

PAUSE/STEP ( X )

Pauses playback temporarily/ press repeatedly for frame-by-frame playback.

PLAY (N)

Starts playback.

STOP (x)

Stops playback.

MARKER

Marks any point during playback.

SEARCH

Displays MARKER SEARCH menu.

PROGRAM

Enter the program edit mode.

ZOOM

Enlarges video image.

REPEAT

Repeat chapter, track, title, all.

A-B

Repeat sequence from point A to point B.

RANDOM

Plays tracks in random order.

RESOLUTION

Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.

Remote Control Battery installation

Detach the battery cover on the rear of the Remote Control, and insert two batteries (size AAA) with 3 and # aligned correctly.

8

Installation and Setup

Setting up the Player

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc.

DVD Player Connections

Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information.

Video and Audio Connections to Your TV

Make sure the unit is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system.

S-Video – Connect the S-VIDEO OUT jack on the unit to the S-Video in jack on the TV using the S- Video cable (S).

Video – Connect the VIDEO OUT jack on the unit to the video in jack on the TV using the video cable

(V).

Audio – Connect the left and right AUDIO OUT jacks of the unit to the audio left and right IN jacks on the TV using the audio cables (A).

Do not connect the unit AUDIO OUT jack to the phone in jack (record deck) of your audio system.

Component Video – Connect the COMPONENT / PROGRESSIVE SCAN jacks on the unit to the corresponding jacks on the TV using an Y PB PR cable (C).

Resolution setting

1.Press RESOLUTION once. The current resolution setting will appear on the display window.

2.Press RESOLUTION repeatedly to change the resolution you want.

The available resolution according to the connections are as shown below.

	OUTPUT CONNECTION	Available Resolution
		1920 x 1080p
	HDMI	1920 x 1080i
		1280 x 720p
	VIDEO OUT
		720 x 480p
		720 x 480i
		1920 x 1080p
	COMPONENT	1920 x 1080i
	VIDEO OUT	1280 x 720p
		720 x 480p
		720 x 480i
	VIDEO OUT	720 x 480i
	S-VIDEO	720 x 480i

Notes:

•The resolution of the VIDEO and S-VIDEO OUTPUT is fixed to 480i.

•If your TV does not accept your resolution setting, abnormal picture appears on the screen.

Please read TV’s owner’s manual then set the resolution that your TV can accept.

•For 720p, 1080i and 1080p resolution on the component video out, only non-copy protected discs can be played back. If the disc is copy protected, it will be displayed at the 480p resolution.

•Depending on your TV, certain HDMI output resolutions may not work.

•Only resolutions supported by the TV are available.

Progressive Scan

•If your television is a high-definition or “digital ready” television, you may take advantage of the unit progressive scan output for the highest possible video resolution.

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT and

S-Video jack).

•The 1080p, 720p and 480p resolutions are the progressive scan applied resolution.

Note for 1080p resolution

This unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display an image from this unit.

<![if ! IE]>

<![endif]>Introduction

<![if ! IE]>

<![endif]>Installation and Setup

<![if ! IE]>

<![endif]>Operation

<![if ! IE]>

<![endif]>Reference

9

HDMI connection

If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable.

1.Connect the HDMI OUTPUT jack on the unit to the HDMI INPUT jack on a HDMI compatible TV or monitor (H).

2.Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

Notes:

•If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 14). When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.

•If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 14).

•If your TV is not equipped with DTS decoder, set the [DTS] options to [Off] on the setup menu (See page 14). To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit’s digital audio outputs.

•The arrow on the cable connector body should face up for correct alignment with the connector on the unit.

•If there is noise or lines on the screen, please check the HDMI cable.

•Not all HDCP-compatible

Tip:

When you use HDMI connection, you can change the resolution (480i, 480p, 720p, 1080i or 1080p) for the HDMI output using RES. button on the front panel.

Caution:

Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.

If your TV does not accept your resolution setting, abnormal picture appears on the screen.

Please read TV’s owner’s manual then set the resolution that your TV can accept.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices.

HDMI was developed to provide the technologies of HDCP (High-bandwidth Digital Content Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Additional Information for HDMI

•When you connect a HDMI or DVI compatible device make sure of the following:

-Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720(1440)x480i, 720x480p, 1280x720p, 1920x1080i, or 1920x1080p video input.

•Not all HDCP-compatible DVI devices will work with this unit.

-It’s impossible copy protected-DVD title’s playback in non-HDCP devices.

•For best performance, directly connect the HDMI output to an HDMI input on your TV. If connecting to some device other than a TV or monitor, such as a home theater receiver with an HDMI input, check the following to make sure the HDMI signal will be received correctly:

-Check the operating instructions of the connected device to make sure that the HDMI input of the device complies with HDMI-HDCP specifications.

-Check that the HDMI setup menu of any nondisplay device is set to “pass-through” so that HDMI signals received are not changed in any way (such as changing the video or audio format).

10

Audio Connection to Optional Equipment

Connect the unit to your optional equipment for audio output.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left and right AUDIO OUT jacks on the unit to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A).

Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS):

Connect one of the unit DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding jack on your amplifier. Use an optional digital (OPTICAL O or COAXIAL X) audio cable.

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio / video receiver that supports one or more of the audio formats supported by your unit such as

MPEG 2, Dolby Digital and DTS. Check the receiver manual and the logos on the front of the receiver.

Notes:

•If the audio format of the digital output does not match the capabilities of your receiver, the receiver produces a strong, distorted sound or no sound at all.

•Six Channel Digital Surround Sound via a digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

<![if ! IE]>

<![endif]>Introduction

<![if ! IE]>

<![endif]>Installation and Setup

<![if ! IE]>

<![endif]>Operation

<![if ! IE]>

<![endif]>Reference

11

Displaying Disc Information

On-Screen

You can display various information about the disc loaded on-screen.

1.Press DISPLAY to show various playback information.

The displayed items differ depending on the disc type or playing status.

2.You can select an item by pressing v / V and change or select the setting by pressing b / B.

•Title – Current title. number/total number of titles.

•Chapter – Current chapter number/total number of chapters.

•Time – Elapsed playing time.

•Audio – Selected audio language or channel.

•Subtitle – Selected subtitle.

•Angle – Selected angle/total number of angles.

Note:

If any button is not pressed for a few seconds, the onscreen display disappears.

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the

Setup menu, among other things. For details on each Setup menu item, see pages 13 to 15.

To display and exit the Menu:

Press SETUP to display the menu. A second press of SETUP will take you back to initial screen.

To go to the next level:

Press B on the Remote Control.

To go back to the previous level:

Press b on the Remote Control.

General Operation

1.Press SETUP.

The Setup menu appears.

2.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).

3.Use v / V to select the second desired option and then press B to move to the third level.

4.Use v / V to select the desired setting then press ENTER to confirm your selection.

Some items require additional steps.

5.Press SETUP or PLAY (N) to exit the Setup menu.

12

LANGUAGE

DISPLAY

Menu Language

Select a language for the Setup menu and on-screen display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.

Original – Refers to the original language in which the disc was recorded.

Other – To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 23. If you enter the wrong language code, press CLEAR.

Off (for Disc Subtitle) – Turn off Subtitle.

TV Aspect

4:3 – Select when a standard 4:3 TV is connected.

16:9 – Select when a 16:9 wide TV is connected.

Notes

If the TV Aspect option is set to 16:9, the Display Mode setting is automatically set to Widescreen.

Display Mode

The Display Mode setting works only when the TV Aspect mode is set to 4:3.

Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen.

Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

<![if ! IE]>

<![endif]>Introduction

<![if ! IE]>

<![endif]>Installation and Setup

<![if ! IE]>

<![endif]>Operation

<![if ! IE]>

<![endif]>Reference

13

AUDIO

Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use.

Dolby Digital / DTS / MPEG

Bitstream – Select “Bitstream” if you connect this unit’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.

PCM (for Dolby Digital / MPEG) – Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital, MPEG will be automatically downmixed to two-channel PCM audio.

Off (for DTS) – If you select “Off”, the DTS signal is not output through the DIGITAL OUT jack.

Sample Freq. (Frequency)

If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them.

If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz.

Check the documentation for your amplifier to verify its capabilities.

DRC (Dynamic Range Control)

With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound.

Set DRC to On for this effect.

Vocal

Set to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound.

LOCK (Parental Control)

Rating

Blocks playback of rated DVDs based on their contents. Not all discs are rated.

1.Select “Rating” on the LOCK menu then press B.

2.To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so.

Input a password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR.

3.Select a rating from 1 to 8 using the v / V buttons.

Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.

Unlock

If you select unlock, parental control is not active and the disc plays in full.

4.Press ENTER to confirm your rating selection, then press SETUP to exit the menu.

Password

You can enter or change password.

1.Select Password on the LOCK menu and then press B.

2.To make a new password:

Press ENTER when the “New” option is highlighted. Enter a new password using the numerical buttons then press ENTER. Enter the password again to verify.

To change the password:

Press ENTER when the “Change” option is highlighted. Enter a current password using the numbered buttons then press ENTER. Enter a new password using the numbered buttons then press ENTER. Enter the password again to verify.

3.Press SETUP to exit the menu.

14

If you forget your password

If you forget your password, you can clear it using the following steps:

1.Press SETUP to display the Setup menu.

2.Input the 6-digit number “210499” and the password is cleared.

Area Code

Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 23.

1.Select “Area Code” on the LOCK menu then press B.

2.Follow the step 2 as shown left (Rating).

3.Select the first character using v / V buttons.

4.Press ENTER and select the second character using v / V buttons.

5.Press ENTER to confirm your Area code selection.

OTHERS

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played in the same way as Audio CDs.

B.L.E. (Black Level Expansion)

To select the black level of playback pictures. Set your preference and monitor’s ability.

On: Expanded grey scale. (0 IRE cut off)

Off: Standard grey scale. (7.5 IRE cut off)

DivX(R) VOD

We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www.divx.com/vod.

1.Select “DivX(R) VOD” option and then press B.

2.Press ENTER while “Select” is selected and the registration code will appear.

Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit.

3.Press ENTER to exit.

Note:

All the downloaded videos from DivX® VOD can only be played back on this unit.

<![if ! IE]>

<![endif]>Installation and Setup

15