<![endif]>ENG
LG CLOUD V SERIES BOX
Please read the safety information carefully before using the product.
LG Cloud V Series Box Model List
CBV42
www.lg.com
2 Table of Contents
<![endif]>EnglishENG
3ASSEMBLING AND PREPARING
3Unpacking
4Parts and Buttons
5Product Installation
5- Using in Horizontal Position
5- Using in Vertical Position
5- Mounting on the Back of the Monitor
6CONNECTING LAN/ PERIPHERALS
6- LAN Connection
6- DVI Connection
7- Extended Monitor Connection
7- Peripheral device connection
9TROUBLESHOOTING
10 SPECIFICATIONS
10Power Indicator
11USING CLOUD SOLUTION
ASSEMBLING AND PREPARING 3
Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here.
<![endif]>EnglishENG
Owner's Manual/Card |
Power Cord |
AC/DC Adapter |
Four Screws |
Main Unit |
Stand Base |
Mount Bracket |
CAUTION
yyOnly use an approved LG power adapter.
yyDamage caused by other power adapters is not covered by warranty.
NOTE
yyNote that the components may look different from those shown here.
yyWithout prior notice, all information and specifications in this manual are subject to change to improve the performance of the product.
yyTo purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product.
4 ASSEMBLING AND PREPARING
<![endif]>EnglishENG
Front Side
Power Indicator &
Power Button
yyOn: Power On
yyOff: Power Off
Rear Side
DC-IN |
LAN |
DVI-D OUT |
DVI-I OUT |
|
|
5V 0.1A
Input Connectors
ASSEMBLING AND PREPARING 5
NOTE
yyIf this product is used with upside down, it may not work properly.
yyUse the product with the Kensington lock facing upward.
1Firmly attach the stand on the bottom of the product as illustrated below.
2Using a coin, turn the screw clockwise to secure the stand base.
NOTE
yyAttach the stand base to the stand hinge with its front part facing forward.
1Fix the mount bracket on the back of the monitor with 4 screws as illustrated below.
2Put the product on the two latches as illustrated below.
Assemble the product by aligning the below two holes out of 4 holes on the product.
CAUTION
yyThe product may not be mounted on some monitors with mount bracket.
- In this case, use the product in horizontal or vertical position.
yyWhen connecting the peripherals after mounting the product on the monitor, be sure to hold the product.
<![endif]>EnglishENG
<![endif]>EnglishENG
6 Connecting LAN/Peripherals
LAN Connection |
DVI Connection |
||||||||||||||||||||||||||
Connect the router or switch to the monitor using a |
Transmits digital video signals to the monitor. Con- |
||||||||||||||||||||||||||
LAN cable as illustrated below. |
nect the product using the DVI cable as illustrated |
||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
below. |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
yyThe LAN cable is sold separately.
yyThe following LAN cable type can be used: Standard: IEEE 802.3 ETHERNET
yyConnect the LAN cable and the peripheral devices to use the CITRIX cloud monitor.
CAUTION
yyConnect the input signal cable and turn in the direction of the arrow. To prevent disconnection secure the cable tightly.
NOTE
yyWhen connecting the power cord to the outlet, use a grounded (3-hole) multi-socket or a grounded power outlet.
yyDVI cable is not included in the basic components. Use the DVI cable provided with the monitor or the standard DVI cable.
|
Connecting LAN/Peripherals 7 |
|
Extended Monitor Connection |
Peripheral device connection |
|
Transmits digital video signals to the monitor. Connect the product using the DVI cable as illustrated below.
Connect peripheral devices to the monitor using USB, microphone and headphone ports.
Front Side
Rear Side
NOTE
yyIf the main/sub screen was changed after extended monitor was connected, the main/ sub can be changed in Setup.
<![endif]>EnglishENG
<![endif]>EnglishENG
8 Connecting LAN/Peripherals
NOTE
yyPeripheral devices are sold separately. yyThe USB ports can be used to connect the
keyboard, mouse, and other USB devices. yyFor an angle plug earphone/microphone, it is difficult connect it with a peripheral device, so
use a straight type.
Angle Type |
Straight Type |
NOTE
yyThe cloud server settings may affect the performance of the headphones, earphones or speakers depending on the connected cloud server.
yyThe cloud server settings may affect the functions or speed of the specific USB storage device depending on the connected cloud server.
TROUBLESHOOTING 9
Nothing is displayed on the screen
Is the power adapter of the Box |
yy Check if the power cord is correctly plugged in to the power outlet. |
plugged in ? |
|
Is the power indicator on? |
yy Check the power indicator. |
Is the power indicator displaying as yy Adjust the brightness and the contrast of the connected monitor. red?
Are the BOX and the monitor con- yy Check whether the monitor and the Box are properly connected to DVI |
|
nected with the signal cable? |
cable or D-SUB cable (using DVI to D-Sub gender). |
|
NOTE
yyThis box type product is used by connecting the monitor.
yyIf the monitor does not work normally, the screen may not be displayed correctly.
<![endif]>EnglishENG
<![endif]>EnglishENG
10 SPECIFICATIONS
Supported Dis- |
Maximum Resolution |
1920 x 1200 @ 60 Hz |
||||
play Resolution |
|
|
|
|
|
|
Recommended Resolution |
1920 x 1200 @ 60 Hz |
|||||
(DVI-I, DVI-D) |
|
|
|
|
|
|
Power |
Voltage |
19 V |
|
1.2 A |
||
|
||||||
|
|
|
|
|
|
|
|
Power consumption (Typ.) |
Cloud Mode 6 W |
||||
|
(Cloud) |
Off Mode ≤ 0.5 W |
||||
Dimension |
Dimensions (Width x Height x Depth) |
|||||
|
With stand |
70.3 mm x 189.3 mm x 143.6 mm |
||||
|
Without Stand |
185 mm x 30.5 mm x 143.6 mm |
||||
Weight (Without |
0.65 kg |
|
|
|
||
Packaging) |
|
|
|
|
|
|
AC/DC adapter |
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC |
|||||
|
Or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE |
|||||
|
Or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd |
|||||
|
Output: 19 V |
|
1.3 A |
|
|
|
|
|
|
|
|
||
Environmental |
Operating Condition |
Temperature: 10°C to 35°C; Humidity: 10% to 80% |
||||
Conditions |
|
|
|
|
|
|
Storing Condition |
Temperature: -20°C to 60°C; Humidity: 5% to 90% |
The specifications are subject to change without notice.
Mode |
LED Color |
On Mode |
Red |
|
|
Off Mode |
Off |
|
|