LG CB20T20X User Manual

Colour Television

OWNER'S MANUAL

Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

Model number : Serial number :

P/NO : 3828VA0159H-2/2 (PC81A, 009K/017N TX, EN)

Installation

Power

This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.

Warning

To prevent fire or shock hazard, do not expose the set to rain or moisture.

Service

Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked +75¥ on the back cover. For the

best reception an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.

Battery installation

The remote control handset is powered by two AA type batteries. Gently pull down the cover of the remote control handset until the battery compartment is exposed. Install two batteries as indicated by the polarity symbols (§]and §^) marked inside the compartment.

Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time.

Connection of external equipment

You can connect additional equipment, such as VCRs, camcorders etc. to your set.

Aerial socket

1. Connect the RF out socket of the VCR to the aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in socket of the VCR. 3 . Store the VCR channel on a desired programme number using the 'Manual

programme tuning' section.

4. Select the programme number where the VCR channel is stored.

5. Press the PLAY button on the VCR.

Euro scart socket

1. Connect the Euro scart socket of the VCR to the Euro scart socket of the set.

2. Press the PLAY button on the VCR. If your VCR outputs a switching voltage connect to Euro scart socket. If

AV On

is selected, the set will switch to AV 1 (AV) mode automatically.

Otherwise press the TV/AV button on the remote control handset to select AV

(AV). The VCR playback picture appears on the screen.

You can also record programmes received by the TV on video tape.

Auto

Audio/Video in sockets (option)

1. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set.

2. Press the TV/AV button to select

3. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.

AV 2.

Headphone socket (option)

In some models which have a headphone sockets can perform this function. Insert the headphone plug to the headphone socket on the front panel. You can listen to the sound through the headphone. To adjust the headphone volume, press the is switched off.

button. If you press the

¢‚/¢”

button, the sound from the headphone

Location and function of controls

PR.LIST

2 3

4 5 6

7 8

VOL

SLEEP

ARC

TV/AV

PSMQ.VIEW

TV/AV

PSM

TEXT

VOLVOL

Q.VIEW

MIX TIME REVEAL

SIZE

HOLD UPDATE

INDEX

ARC

SLEEP

PR.LIST

SSM/

MODE

T X T

EYE

SP/LP ON/OFF

CH+ REW

PLAY FF

CH P/STILL STOP REC

4 5 6

Without TELETEXT

With TELETEXT

All the functions can be controlled with the remote control. Some functions can also be adjusted with the buttons on the front panel of the set.

Remote control handset

Before you use the remote control handset, please install the batteries.

1. POWER

12 13

14 15 16

15 11

switches the set on from standby or off to standby.

2. MUTE

switches the sound on or off.

3. NUMBER BUTTONS

switch the set on from standby or directly select a number.

4. NO FUNCTION

5. NO FUNCTION

6. MENU

selects a menu.

7. TELETEXT BUTTONS (option)

These buttons are used for teletext. For further details, see the Teletext section.

8. Q.VIEW

return to the previously viewed programme.

9. NO FUNCTION

10. TV/AV

selects TV or AV mode. clears the menu from the screen. switches the set on from standby.

11. ARC (Aspect Ratio Control)

change the picture format.

12. PSM (Picture Status Memory)

recalls your preferred picture setting.

13. NO FUNCTION

14. ¡ª/¡ (Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby. ¢‚/¢” (Volume Down/Up) adjusts the volume. adjusts menu settings.

accepts your selection or displays the current mode.

15. SLEEP

sets the sleep timer.

16. PR. LIST

displays the programme table.

17. VCR BUTTONS (option)

control a LG video cassette recorder.

COLOURED BUTTONS

These buttons are used for teletext (only TELETEXT models) or programme edit.

Location and function of controls

Front panel

Shown is a simplified representation of front panel. Here shown may be somewhat different from your set.

POWER

18. MAIN POWER

switches the set on or off.

19. POWER/STANDBY INDICATOR

illuminates brightly when the set is in standby mode. dims when the set is switched on.

20. REMOTE CONTROL SENSOR

21. AUDIO/VIDEO IN SOCKETS (AV2) (option)

Connect the audio/video out sockets of external equipment to these sockets.

22. HEADPHONE SOCKET (option)

Connect the headphone plug to this socket.

rr yy

MENU OK ¢‚VOL¢” ¡ PR¡ª VIDEO AUDIO

19 20 6 22

AV2

––

Basic operation

On and off

1. Press the main power button to switch the set on.

2. If the set is in standby mode, press the r, on the remote control handset to switch it on fully.

3. Press the r button on the remote control handset. The set reverts to standby mode.

4. Press the main power button again to switch the set off.

Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket.

Programme selection

You can select a programme number with the

Volume adjustment

Press the

¢‚/¢”

button to adjust the volume.

Mute function

Press the WWbutton. The sound is switched off and the display WWappears. You can cancel it by pressing the

Quick view

Press the Q.VIEW button to view the last programme you were watching.

On screen language selection

The menu can be displayed on the screen in desired language. First select your language.

1. Press the MENU button to select the Station menu.

2. Press the

3. Press the OK button.

4. Press the

5. Press the OK button. All the on screen displays will appear in the selected language.

6. Press the TV/AV button to return to normal TV viewing.

¡ª/¡

button to select Language.

¡ª/¡

¢‚/¢”

button to select your desired language.

¢‚/¢”

¡ª/¡

, TV/AV or NUMBER buttons

¡ª/¡

or NUMBER buttons.

button.

+ 8 hidden pages