LG BH6420P User guide

OWNER’S MANUAL

3D Blu-ray™/ DVD Home Theater System

Please read this manual carefully before operating your set and retain it for future reference.

BH6220S (BH6220S, S62S1-S, S62S1-S, S62T1-C, S62S1-W) BH6320H (BH6320H, SH86TM-S, SH86TM-C, SH85TM-W) BH6420P (BH6420P, S62T1-S, S62S1-S, S62T1-C, S62S1-W) BH6520T (BH6520T, S62T1-S, S62T1-C, S62S1-W) BH6620P (BH6620P, SH86TQ-S/ C, SH86PE-S, S62D3-W) BH6620S (BH6620S, SH86PE-S, SH86TQ-C, S62D3-W) BH6620T (BH6620T, SH86TQ-S/ C, S62D3-W)

Getting Started2

Safety Information

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

CAUTION : CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

Use of controls, adjustments or the performance of procedures other than those specied herein may result in hazardous radiation exposure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Getting Started 3

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

Disposal of waste batteries/accumulators

1. When this crossed-out wheeled bin symbol is attached to batteries/ accumulators of Your product it means they are covered by European Directive 2006/66/EC.

2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005% of mercury,0.002% of cadmium or 0.004% of lead.

3. All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

4. The correct disposal of Your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health.

5. For more detailed information about disposal of Your old batteries/ accumulators, please contact Your city office, waste disposal service or the shop where You purchased the product.

Getting Started

Getting Started4

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the equipment: Remove the

old battery or battery pack, follow the steps

Getting Started

in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, shall be placed on the apparatus.

Notes on Copyrights

Because AACS (Advanced Access Content

System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.

Furthermore, BD-ROM Mark and BD+ are

additionally used as content protection systems for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact an authorized Customer Service Centre.

Many BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.

This product incorporates copyright protection

technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi. Reverse engineering or disassembly is prohibited.

Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability.

Important Notice for TV colour system

The colour system of this player diers according to currently playing discs.

For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.

Only the multi system colour TV can receive all signals output from the player.

yIf you have a PAL colour system TV, you will see

just distorted images when using discs or video contents recorded in NTSC.

yThe multi system colour TV changes the colour

system automatically according to input signals. In case that the colour system is not changed automatically, turn it o and then on to see normal images on screen.

yEven if the disc recorded in NTSC colour system

are well displayed on your TV, these may not be recorded correctly on your recorder.

Caution

yWatching a 3D content for a long period

time may cause dizziness or tiredness.

yIt is not recommended to watch a movie

in 3D mode for inrm, child and pregnant woman.

yIf you are experiencing headache, tiredness

or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal.

Getting Started 5

Getting Started

Table of Contents6

Table of Contents

1 Getting Started

2 Safety Information 8 Introduction 8 – Playable Discs and symbols used in

this manual

9 – About the “7” Symbol Display 9 – Compatibility Notes 10 – File compatibility 11 – AVCHD (Advanced Video Codec High

Definition) 12 – About DLNA 12 – Certain System Requirements 12 – Regional Code 12 – System Select 13 Remote control 14 Front panel 15 Rear panel

2 Connecting

16 Positioning the system 17 Speaker Connection 17 – Attaching the speakers to the player 18 Connecting to Your TV 18 – HDMI Connection 19 – What is SIMPLINK? 20 – Video Connection 20 – Resolution Setting 21 Antenna connection 22 Connections with external device 22 – AUX Connection 22 – PORT. IN connection 23 – OPTICAL IN connection 24 Connecting to your Home Network 24 – Wired network connection 25 – Wired Network Setup 27 USB device connection 27 – Playback content in the USB device

3 System Setting

28 Settings 28 – Initial Setup 29 – Adjust the Setup Settings 30 – [DISPLAY] Menu 31 – [LANGUAGE] Menu 32 – [AUDIO] Menu 34 – [LOCK] Menu 35 – [NETWORK] Menu 35 – [OTHERS] Menu 37 Sound Effect

4 Operating

38 General Playback 38 – Using [HOME] menu 38 – Playing a Disc 38 – Playing a file on a disc/USB device 39 – Playing Blu-ray 3D disc 39 – Enjoying BD-Live™ 40 – Playing a file on a network server 40 – Basic operations for video and audio

content 41 – Basic operations for photo content 41 – Using the disc menu 41 – Resume playback 41 – Last Scene Memory 42 Advanced Playback 42 – Repeat Playback 42 – Repeating a specific portion 42 – Viewing content information 43 – Changing content list view 43 – Selecting a subtitle file 44 – Options while viewing a photo 44 – Listening to music while slide show 45 On-Screen display 45 – Displaying content information on-

screen 46 – Playing from selected time 46 – Selecting a subtitle language 46 – Hearing a different audio 46 – Watching from a different angle 47 – Changing the TV Aspect Ratio 47 – Changing subtitle code page 47 – Changing the Picture Mode 48 Audio CD Recording

49 Radio Operations 49 – Listening to the radio 49 – Presetting the Radio Stations 49 – Deleting a saved station 49 – Deleting all the saved stations 49 – Improving poor FM reception 49 – See information about a radio station 50 Using the Premium 50 Using the LG Apps 51 – Signing in 51 – Managing my Apps

5 Troubleshooting

52 Troubleshooting 52 – General 53 – Network 54 – Picture 54 – Sound 54 – Customer Support 54 – Open source software notice

Table of Contents 7

6 Appendix

55 Controlling a TV with the Supplied

Remote Control

55 – Setting up the remote to control your

TV 56 Network Software Update 56 – Network update notification 56 – Software Update 58 About Nero MediaHome 4 Essentials 58 – System Requirements 59 – Installing Nero MediaHome 4

Essentials 59 – Sharing files and folders 60 Area Code List 61 Language code List 62 Trademarks and Licenses 64 Audio Output Specifications 65 Specifications 73 Maintenance 73 – Handling the Unit 73 – Notes on Discs 74 Important Information Relating to

Network Services

Getting Started8

Introduction

Playable Discs and symbols used in this manual

Getting Started

Media/Term Logo Symbol Description

Discs such as movies that can be purchased or

rented.

“Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.

BD-R/RE discs that are recorded in BDAV format.

yBD-R/RE discs that contain Movie, Music or

Photo les.

ISO 9660+JOLIET, UDF and UDF Bridge format

yDiscs such as movies that can be purchased or

rented.

Movie mode and nalized only

ySupports the dual layer disc also

Finalized AVCHD format

DVD±R/RW discs that contain Movie, Music or

Photo les.

ISO 9660+JOLIET, UDF and UDF Bridge format

Blu-Ray

DVD-ROM

DVD-R

DVD-RW

DVD+R

DVD+RW

(8 cm, 12 cm)

y u i

DVD-RW

(VR)

(8 cm, 12 cm)

Audio CD

(8 cm, 12 cm)

CD-R/RW

(8 cm, 12 cm)

Note –

Caution –

y u i

VR mode and nalized only

Audio CD

CD-R/RW discs that contain Movie, Music or

Photo les.

yISO 9660+JOLIET, UDF and UDF Bridge format

Indicates special notes and operating features.

Indicates cautions for preventing possible damages from abuse.

Note

yDepending on the conditions of the

recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

yDepending on the recording software & the

nalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.

yBD-R/RE, DVD±R/RW and CD-R/RW discs

recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

yIf you record a disc using a personal

computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

yThis player requires discs and recordings to

meet certain technical standards in order to achieve optimal playback quality.

yPre-recorded DVDs are automatically set to

these standards. There are many dierent types of recordable disc formats (including CD-R containing MP3 or WMA les) and these require certain pre-existing conditions to ensure compatible playback.

yCustomers should note that permission

is required in order to download MP3 / WMA les and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

yYou have to set the disc format option

to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)

Getting Started 9

About the “7” Symbol Display

“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specic media.

Compatibility Notes

yBecause BD-ROM is a new format, certain disc,

digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center.

yThis unit allows you to enjoy functions such

as picture-in-picture, secondary audio and Virtual packages, etc., with BD-ROM supporting BONUSVIEW (BD-ROM version 2 Prole 1 version

1.1). Secondary video and audio can be played from a disc compatible with the picture-inpicture function. For the playback method, refer to the instructions in the disc.

yViewing high-denition content and up-

converting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device.

Some BD-ROM and DVD discs may restrict the

use of some operation commands or features.

yDolby TrueHD, Dolby Digital Plus and DTS-HD are

supported with maximum 5.1 channels if you use HDMI connection for the audio output of the unit.

You can use a USB device to store some disc

related information, including downloaded online content. The disc you are using will control how long this information is retained.

Getting Started

Getting Started10

File compatibility

Movie files

Getting Started

File

Location

Disc,

USB

DLNA

Music files

File

Extension

“.avi”, “.divx”, “.mpg”, “.mpeg”, “.mk v”, “.mp4”, “.asf ”, “.wmv”, “.m4v” (DRM free), “.vob”, “.3gp”

“.avi”, “.divx”, “.mpg”, “.mpeg”, “.mk v”, “.mp4”, “.asf ”, “.wmv”, ".m4v" (DRM free)

Codec Format Audio Format Subtitle

DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx (Standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3)

DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx, XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3)

Dolby Digital, DTS, MP3, WMA, AAC, AC3

SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)

SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer

1.0 (.sub), SubViewer 2.0 (.sub/. txt), TMPlayer (.txt), DVD Subtitle System (.txt)

File

Location

Disc,

USB

DLNA

File

Extension

“mp3”, “.wma”, “.wav ”, “.m4a” (DRM free), “.ac”

“mp3”, “.wma”, “.wav ”, “.m4a” (DRM free)

Sampling Frequency Bitrate Note

within 32 - 48 kHz (WMA), within 16 - 48 kHz (MP3)

within 32 - 192 kbps (WMA), within 32 - 320 kbps (MP3)

Some wav les are not supported on this player.

Photo files

File

Location

Disc, USB,

DLNA

Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA

and WMV.

File

Extension

“.jpg”, “.jpeg”, “.png”, “.gif”

Recommended

Size

Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel

Note

Progressive and lossless compression photo image les are not supported.

Getting Started 11

Note

yThe le name is limited to 180 characters.

yMaximum les/folder: Less than 2 000

(total number of les and folders)

yDepending on the size and number of the

les, it may take several minutes to read the contents on the media.

yFile compatibility may dier depending on

the server.

yBecause the compatibility on DLNA server

are tested on the bundle DLNA server (Nero MediaHome 4 Essentials Windows edition) environment, le requirements and playback functions may dier depending on media servers.

ySupplied bundle DLNA server for Macintosh

edition has limitations in le compatibility, such as ASF, WMA and WMV.

yThe le requirements on page 10 are

not always compatible. There may have some restrictions by le features and media server’s ability.

yPlaying a movie subtitle les are only

available on share folder of a PC or DLNA media server created by supplied Nero MediaHome 4 Essentials software on this player package.

yThe les from removable media such as USB

drive, DVD-drive etc. on your media server may not be shared properly.

yThis unit cannot support the ID3 Tag

embedded MP3 le.

yThe total playback time of audio le

indicated on the screen may not correct for VBR les.

yHD movie les contained on the CD/DVD or

USB 1.0/1.1 may not played properly. Blu-ray Disc or USB 2.0 are recommended to play back HD movie les.

yThis player supports H.264/MPEG-4 AVC

prole Main, High at Level 4.1. For a le with higher level, the warning message will appear on the screen.

yThis player does not support les that are

recorded with GMC

*1 GMC – Global Motion Compensation

*2 Qpel – Quarter pixel

or Qpel

Note

yA “avi” le which is encoded “WMV 9 codec”

is not supported.

yThis player supports UTF-8 les even it

contains Unicode subtitle contents. This player can not support the pure Unicode subtitle les.

yDepending on the types of le or ways of

recording, it may not play back.

yA disc which was recorded by multi-session

on normal PC is not supported on this player.

yTo be playback a movie le, movie le name

and Subtitle le name must be the same.

yIf video codec is MPEG2 TS or MPEG2 PS,

subtitle does not play back.

yThe total playback time of music le

indicated on the screen may not correct for VBR les.

AVCHD (Advanced Video Codec High Definition)

yThis player can playback AVCHD format discs.

These discs are normally recorded and used in camcorders.

The AVCHD format is a high denition digital

video camera format.

The MPEG-4 AVC/H.264 format is capable of

compressing images at higher eciency than that of the conventional image compressing format.

yThis player can playback AVCHD discs using

“x.v.Color” format.

ySome AVCHD format discs may not play

depending on the recording condition.

yAVCHD format discs need to be nalized.

“x.v.Color” oers a wider color range than normal

DVD camcorder discs.

Getting Started

Getting Started12

About DLNA

This Player is a DLNA Certied digital media player that can display and play movie, photo and music content from your DLNA-compatible digital media

server (PC and Consumer Electronics).

Getting Started

The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through your home network.

The DLNA certication logo makes it easy to nd products that comply with the DLNA Interoperability Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5.

When a PC running DLNA server software or other DLNA compatible device is connected to this player, some setting changes of software or other devices may be required. Please refer to the operating instructions for the software or device for more information.

Certain System Requirements

For high denition video playback:

yBD-ROM disc with high denition content.

HDMI or HDCP capable DVI input on your display

device is required for some content (as specied by disc authors).

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.

System Select

You must select the appropriate system mode for your TV system. Open the disc tray using the B (Open/Close) button and then, press and hold M (PAUSE) for more than ve seconds to be able to select a system (PAL, NTSC, AUTO)

Getting Started 13

Remote control

FUNCTION

INFO/MENU

Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with

and 5 matched correctly.

• • • • • •

FUNCTION: Changes input mode.

SUBTITLE: Selects a subtitle

language.

(POWER): Switches the player

ON or OFF.

(OPEN/CLOSE): Ejects a disc.

SLEEP: Sets a certain period of time after which the unit will switch to o.

INFO/MENU (m): Displays or exits On-Screen Display.

HOME (

[Home Menu].

DISC MENU: Accesses menu on a disc.

• • • • • •

Direction buttons: Selects an option in the menu.

PRESET +/-: Selects programme of Radio.

TUNING +/-: Tunes in the desired radio station.

ENTER (b): Acknowledges menu selection.

BACK (

returns to the previous screen.

TITLE/POPUP: Displays the DVD title menu or BD-ROM’s POPUP menu, if available.

(STOP): Stops playback.

(PLAY): Starts playback.

(PAUSE/STEP): Pauses

playback.

C/V

next or previous chapter / track / le.

c/v

backward or forward.

• • • • • •

): Displays or exits the

• • • • •

): Exits the menu or

(SKIP): Goes to the

(SCAN): Searches

• • • • • •

SPEAKER LEVEL: Sets the sound level of desired speaker.

SOUND EFFECT: Selects a sound eect mode.

VOL +/-: Adjusts speaker volume.

OPTICAL: Changes input mode to

optical directly.

MUTE: Mute the unit.

Colored (R, G, Y, B) buttons:

- Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO], [MUSIC], [Premium] and [LG Apps] menu.

- B button: Selects mono/ stereo in FM mode.

0-9 numerical buttons: Selects numbered options in a menu.

CLEAR: Removes a mark on the search menu or a number when setting the password.

REPEAT (h): Repeats a desired section or sequence.

AUDIO: Selects an audio language or audio channel.

MIC/ECHO: Selects the microphone mode or microphone’s echo mode. After selecting the desired mode, press VOL +/- to adjust microphone volume or microphone’s echo volume.

: Marked button is not available.

• • • • • •

TV Control Buttons: See page

54.

• • • • •

Getting Started

Getting Started14

Front panel

Getting Started

Disc tray

Display Window

MIC 1/2

PORT. IN

USB Port

Operation buttons

(Open / Close)

(Play / Pause)

T I

F (Function)

Changes the input source or function.

VOL -/+

(Stop)

(Power)

Rear panel

Getting Started 15

Getting Started

AC power cord

Speakers connectors

Cooling Fan

OPTICAL IN

Antenna Connector

AUX (L/R) INPUT

LAN port

HDMI OUT TO TV

VIDEO OUT

Connecting16

DEE

ABA

DEE

EFG

Positioning the system

The following illustration shows an example of positioning the system. Note that the illustrations in these instructions dier from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening

position (

Connecting

Caution

yBe careful to make sure children not to put

their hands or any objects into the *speaker duct. *Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure).

yPlace the center speaker at a safe distance

from the child’s reach. Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.

yThe speakers contain magnetic parts, so

colour irregularity may occur on the CRT TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.

yBefore using the subwoofer, remove the

protective vinyl.

Front left speaker (L)/ Front right speaker (R):

Place the front speakers to the sides of the monitor or screen and as ush with the screen surface as possible.

Center speaker:

Place the center speaker above or below the monitor or screen.

Surround left speaker (L)/ Surround right speaker (R):

Place these speakers behind your listening position, facing slightly inwards.

Subwoofer:

The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reections.

Unit

Speaker Connection

Attaching the speakers to the player

1. Connect speaker wires to the player. Each speaker wire is color-coded. Use matching color wires for corresponding speakers.

Color Speaker Position

Grey Rear Rear right

Blue Rear Rear left

Green Center Center

Orange

Red Front Front right

White Front Front left

2. Connect the speaker wire to the terminal on the speaker.

Connect the black stripe of each wire to the

terminals marked - (minus) and the other end to the terminals marked + (plus).

Sub woofer

Any front position

Connecting 17

Connecting

Connecting18

Connecting to Your TV

Make one of the following connections, depending on the capabilities of your existing equipment.

yHDMI connection (page 18)

Video connection (page 20)

Note

Connecting

yDepending on your TV and other

equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.

yPlease refer to the manuals of your TV,

stereo system or other devices as necessary to make the best connections.

yMake sure the player is connected directly

to the TV. Tune the TV to the correct video input channel.

yDo not connect your player via your VCR.

The image could be distorted by the copy protection system.

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.

Rear of the unit

HDMI cable

Set the TV’s source to HDMI (refer to T V’s Owner’s manual).

Additional Information for HDMI

When you connect a HDMI or DVI compatible

device make sure of the following:

Try switching o the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

The connected device’s video input is set correctly for this unit.

The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.

Not all HDCP-compatible HDMI or DVI devices

will work with this player.

The picture will not be displayed properly with non-HDCP device.

Note

yIf a connected HDMI device does not accept

the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.

yWhen you use HDMI connection, you can

change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 20.)

ySelect the type of video output from the

HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page

31).

yChanging the resolution when the

connection has already been established may result in malfunctions. To solve the problem, turn o the player and then turn it on again.

yWhen the HDMI connection with HDCP

is not veried, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.

yIf there are noises or lines on the screen,

please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)).

Connecting 19

What is SIMPLINK?

Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power O, etc.

Refer to the TV owner’s manual for the details of SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as shown above.

Note

Depending on the disc type or playing status, some SIMPLINK operation may dier from your purpose or not work.

Connecting

Connecting20

Video Connection

Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.

Rear of the unit

Connecting

Video cable

Resolution Setting

The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu.

Press HOME ( ).

2. Use (b). The [Setup] menu appears.

Use

press D to move to the second level.

Use

then press ENTER (b) to move to the third level.

5. Use press ENTER (b) to confirm your selection.

to select the [Setup] and press ENTER

A/D

to select [DISPLAY] option then

W/S

to select the [Resolution] option

W/S

to select the desired resolution then

W/S

Note

yIf your TV does not accept the resolution

you have set on the player, you can set resolution to 576p as follows:

1. Press B to open the disc tray.

2 Press Z (STOP) for more than 5 seconds.

yWhen you set the resolution to 576i with

HDMI connection, actual resolution is outputted to 576p.

yIf you select a resolution manually and then

connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

yIf you select a resolution that your TV

does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.

yThe 1080p video output frame rate may

be automatically set to either 24 Hz or 60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc.

yThe resolution of the VIDEO OUT jack is

always outputted at 576i resolution.

Connecting 21

Antenna connection

Connect the supplied antenna for listening to the radio.

Rear of the unit

Note

After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.

Connecting

Connections with external device

AUX Connection

You can enjoy the sound from an external component through the speakers of this system.

Connect the analog audio output jacks of your

Connecting

component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing FUNCTION and ENTER (b).

You can also use the F (Function) button on the front panel to select the input mode.

Rear of the unit

Red

White

PORT. IN connection

You can enjoy the sound from your portable audio player through the speakers of this system.

Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN socket of this unit. And then select the [PORTABLE] option by pressing FUNCTION and ENTER (b).

You can also use the F (Function) button on the front panel to select the input mode.

MP3 player, etc...

To the audio output jacks

of your component

(T V, VCR, etc.)

OPTICAL IN connection

You can enjoy the sound from your component with a digital optical connection through the speakers of this system.

Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing FUNCTION and ENTER (b). Or press OPTICAL to select directly.

You can also use the F (Function) button on the front panel to select the input mode.

Rear of the unit

To the digital optical output jack of your component

Connecting 23

Connecting

+ 51 hidden pages