LG P03AH, APNZ286R20 User Manual
DEUTSCH FRANÇAIS ESPAÑOL ITALIANO ENGLISH
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating your set and retain it for future reference.
TYPE : FLOOR STANDING
The equipment complies with requirements of the Technical Regulation, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
www.lg.com
P/NO : 3828A22014N
Floor StandingType Air Conditioner Ownerʼs Manual
TABLE OF CONTENTS
Safety Precautions................. |
3 |
Prior to Operation .................. |
6 |
Indtroduction.......................... |
6 |
Operating Instructions........... |
5 |
Maintenance and Service .... |
22 |
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
νStaple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.
You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for service at all.
PRECAUTION
•Contact the authorized service technician for repair or maintenance of this unit.
•Contact the installer for installation of this unit.
•The air conditioner is not intended for use by young children or invalids without supervision.
•Young children should be supervised to ensure that they do not play with the air conditioner.
•When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.
•Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only.
2 Floor Standing-Type Air Conditioner
Safety Precautions
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed.
νIncorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.
WARNING |
This symbol indicates the possibility of death or serious injury. |
CAUTION |
This symbol indicates the possibility of injury or damage. |
ν Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
ν Installation
Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
•There is risk of fire or electric shock.
Install the panel and the cover of control box securely.
•There is risk of fire or electric shock.
Do not modify or extend the power cable.
•There is risk of fire or electric shock.
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.
•Do not disassemble or repair the product. There is risk of fire or electric shock.
Always ground the product.
•There is risk of fire or electric shock.
Always install a dedicated |
Use the correctly rated |
circuit and breaker. |
breaker or fuse. |
• Improper wiring or installation |
• There is risk of fire or electric |
may cause fire or electric shock |
shock. |
Do not install, remove, or reinstall the unit by yourself (customer).
•There is risk of fire, electric shock, explosion, or injury.
Be cautious when unpacking and installing the product.
•Sharp edges could cause injury.
Be especially careful of the case edges and the fins on the condenser and evaporator.
ENGLISH
Owner's Manual 3
Safety Precautions
For installation, always contact the dealer or an Authorized Service Center.
•There is risk of fire, electric shock, explosion, or injury.
Do not install the product on a defective installation stand.
•It may cause injury, accident, or damage to the product.
Be sure the installation area does not deteriorate with age.
•If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.
ν Operation
Do not let the air conditioner run for a |
Take care to ensure that power |
long time when the humidity is very high |
cable could not be pulled out or |
and a door or a window is left open. |
damaged during operation. |
• Moisture may condense and wet |
• There is risk of fire or electric |
or damage furniture. |
shock. |
Do not plug or unplug the |
Do not touch(operate) the |
power supply plug during |
product with wet hands. |
operation. |
|
• There is risk of fire or electric |
• There is risk of fire or electrical |
shock. |
shock. |
Do not place anything on the power cable.
•There is risk of fire or electric shock.
Do not place a heater or other appliances near the power cable.
•There is risk of fire and electric shock.
Do not allow water to run into electric parts.
•It may cause There is risk of fire, failure of the product, or electric shock.
When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.
•Do not use the telephone or turn switches on or off.
There is risk of explosion or fire
Do not open the inlet grill of the product during operation.
(Do not touch the electrostatic filter, if the unit is so equipped.)
•There is risk of physical injury, electric shock, or product failure.
Do not store or use flammable gas or combustibles near the product.
•There is risk of fire or failure of product.
If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect the power supply cable.
•There is risk of electric shock or fire.
When the product is soaked (flooded or submerged), contact an Authorized Service Center.
•There is risk of fire or electric shock.
Do not use the product in a tightly closed space for a long time.
• Oxygen deficiency could occur.
Stop operation and close the window in storm or hurricane. If possible, remove the product from the window before the hurricane arrives.
•There is risk of property damage, failure of product, or electric shock.
Be cautious that water could not enter the product.
•There is risk of fire, electric shock, or product damage.
Ventilate the product from time to time when operating it together with a stove, etc.
• There is risk of fire or electric shock.
When the product is not be used for a long time, disconnect the power supply plug or turn off the breaker.
•There is risk of product damage or failure, or unintended operation.
Turn the main power off when cleaning or maintaining the product.
• There is risk of electric shock.
Take care to ensure that nobody could step on or fall onto the outdoor unit.
•This could result in personal injury and product damage.
4 Floor Standing-Type Air Conditioner
Safety Precautions
CAUTION
ν Installation
Always check for gas |
Install the drain hose to |
(refrigerant) leakage after |
ensure that water is drained |
installation or repair of product. |
away properly. |
• Low refrigerant levels may cause |
• A bad connection may cause |
failure of product. |
water leakage. |
Do not install the product where the |
Use two or more people to |
noise or hot air from the outdoor unit |
lift and transport the |
could damage the neighborhoods. |
product. |
• It may cause a problem for your |
• Avoid personal injury. |
neighbors. |
|
Keep level even when installing the product.
•To avoid vibration or water leakage.
Do not install the product where it will be exposed to sea wind (salt spray) directly.
•It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.
ν Operation
Do not expose the skin directly to cool air for |
Do not use the product for special purposes, such as |
long periods of time. |
preserving foods, works of art, etc. It is a consumer air |
(Don't sit in the draft.) |
conditioner, not a precision refrigeration system. |
• This could harm to your health. |
• There is risk of damage or loss of property. |
Do not block the inlet or outlet of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.
•There is risk of fire, electric shock, or damage to the plastic parts of the product.
Do not touch the metal parts of the product when removing the air filter. They are very sharp!
• There is risk of personal injury.
Do not step on or put anyting on the product. (outdoor units)
•There is risk of personal injury and failure of product.
Always insert the filter securely. Clean the filter every two weeks or more often if necessary.
•A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.
Do not insert hands or other objects through the air inlet or outlet while the product is operated.
•There are sharp and moving parts that could cause personal injury.
Do not drink the water |
Use a firm stool or ladder |
drained from the product. |
when cleaning or |
|
maintaining the product. |
• It is not sanitary and could cause |
• Be careful and avoid personal |
serious health issues. |
injury. |
Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries.
• There is risk of fire or explosion
Do not recharge or disassemble the batteries. |
If the liquid from the batteries gets onto your |
Do not dispose of batteries in a fire. |
skin or clothes, wash it well with clean water. Do |
|
not use the remote if the batteries have leaked. |
• They may burn or explode. |
• The chemicals in batteries could cause burns or other |
|
health hazards. |
ENGLISH
Owner's Manual 5
Prior to Operation
Prior to Operation
Preparing for Operation
1.Contact an installation specialist for installation.
2.Plug in the power plug properly.
3.Use a dedicated circuit.
4.Do not use an extension cord.
5.Do not start/stop operation by plugging/unplugging the power cord.
6.If the cord/plug is damaged, replace it with only an authorized replacement part.
Usage
1.Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for a long time.
2.Due to the possibility of oxygen deficiency, ventilate the room when using the appliance together with stoves or other heating devices.
3.Do not use this air conditioner for non-specified special purpose (e.g. preserving precision devices, food, pets, plants, or art objects). Such use may damage your properties.
Cleaning and Maintenance
1.Do not touch the metal parts of the unit when removing the filter. Injury can occur.
2.Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to electric shock.
3.When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unitʼs power is triggered while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
Introduction
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the air conditioner.
NOTICE |
This symbol indicates special notes. |
6 Floor Standing-Type Air Conditioner
Operating Instructions |
Safety Precautions |
|
|
Operating Instructions
Features and Specifications
1. 3D Stereo Cooling
This first developed 3D Stereo Cooling Method makes clear a dead zone to cool the indoor evenly within a early time.
2. Edge Installation Design
You can use the installation space in a effective way to adopt semi built-in type of 3D Diamond design.
3. Magic Remote
You can keep remote controller conveniently with separate holder on the side of the product.
4.Design for cooling & Heating
5.Super energy efficiency
6.Micom control
7.Whisper quiet operation
8.Wireless remote control
9.3 cooling speeds
2 heating speeds
10.Removable air filter
11.Anti-Bacteria filter
12.3 minutes delay circuit
13.Turbo-Z operation
14.Energy saving
15.Auto restart
16.Plasma Air Purifying system
INDOOR UNIT |
OUTDOOR UNIT |
|||
1. Cool air outlet(2 sides) by Manual operation |
1. |
Air Outlet |
||
2. |
Cool air outlet(front side) |
2. |
Air Inlet(back side) |
|
3. |
Top/Bottom Airflow Control Louver |
3. |
Control Cover |
|
4. |
Left/Right Airflow Control Louver |
|||
4. |
Base Panel |
|||
5. |
Sliding Clean Door |
|||
|
(It is made of special materials of durability, rust-resistance |
|||
6. |
Touch Panel |
|
||
|
and non-coating.) |
|||
7. |
Anti-Bacteria Filter |
5. |
Ground Terminal |
|
8. |
Air Inlet |
|||
6. |
Refrigerant Pipe Port |
|||
9. |
Remote Controller Holder |
|||
|
|
|||
10. Plasma Air Cleaner
3 |
4 |
|
|
1 |
|
|
|
2 |
|
|
|
3 |
|
|
|
4 |
2 |
3 |
|
5 |
|||
|
|
||
9 |
|
|
|
6 |
|
|
|
7 |
|
|
10
8
7
8
1 |
4 |
5 |
6 |
ENGLISH
Owner's Manual 7
Operating Instructions
Indoor Unit Controls and Indicators
SET |
ON/OFF |
ROOM |
TEMP. |
PLASMA
TURBO-Z |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
||||||
(Cooling Model) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
SET |
|
|
TEMP. |
ON/OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
ROOM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
PLASMA
TURBO-Z |
1 |
14 |
4 |
3 |
15 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
(Heat Pump Model)
SET |
ON/OFF |
ROOM |
TEMP. |
PLASMA
TURBO-Z |
1 14 4 3 16 15 5 6 7 8 9 10 11 12 13
(Heater & Heat Pump Model)
1. |
Energy Saving Operation Key |
10. |
Turbo-Z Operation Display |
2. |
Auto Operation Key |
11. |
Room Temperature Setting Key |
3. |
Soft Dry Operation Key |
12. |
Air Cleaner Operation Key |
4. |
Cooling Operation Key |
13. |
On/Off Key |
5. Indoor Fan Speed Key |
|
Operation starts when this key is touched and |
|
|
Used to select fan speed in three steps-low, mid, |
|
stops when the key is touched again. |
|
14. |
Heating Operation Key |
|
|
high. |
||
6. |
Room Temp/Set Temp Display |
15. |
Defrost Operation Display |
7. |
Fan Speed Operation Display |
16. |
Electric Heater Operation Key |
8.Outdoor Unit Operation Display
9.Off Timer Operation Display
8 Floor Standing-Type Air Conditioner
Operating Instructions
Name and Function-Remote Control
2
4
A/CL
3
5
TURBO-Z
7
8
(Heat pump Model)
2
4
A/CL
3
5
TURBO-Z
7
8
(Cooling Model)
1
15
9
10
11
6
12
13
14
1
9
10
11
6
12
13
14
1.Signal Transmitter
•Transmits the signals to the Floor Standing Type air conditioner
2.Operation Display of the Remote Control
3.Timer Set Button
•Each time the button is pressed, the mode is changed in the following process.
Timer set (1, 2, 3, 4, 5, 6, 7 hours)
If you select “0:00” the off Timer function will be canceled.
4.Plasma Airfurifying Button
5.Auto Airflow Direction Control Button
•The holizontal louvers swing up and down.
6.Auto Airflow Direction Control Button
•The vertical louvers swings left and right.
7.Turbo-Z Cooling Operation Button
8.Indoor Fan Speed Selection Button
•To select the desired fan speed in two steps [Low, Mid, High]
9.Cooling ON Button
10.Heating Button (Heat Pump Model Only) Auto Operation Button (Cooling Model Only)
11.Soft Dry Operation Button
12.Energy Saving Operation Button(Cooling Model Only)
13.Power ON/OFF Button
•Operation will start when this button is pressed, and stop when the button is pressed again.
14.Temperature Setting Buttons
15.Electric Heater ON/OFF Button(Heat Pump & Electric Heater Product Only)
Wireless Remote Control Puts all functions at your fingertips
Handling the remote control
•Aim at the signal receptor on the floor standing type air conditioner when operating.
•The remote control signal can be received at a distance of up to about 7meters.
•Be sure that there are no obstructions between the remote control and the signal receptor.
•Do not drop or throw the remote control.
•Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat source.
ENGLISH
Owner's Manual 9
Loading...