Read these instructions. Breaking the rules may be dangerous or
illegal. Further detailed information is given in this user guide.
WARNING! Violation of the instructions may cause serious injury or
death.
1. Never use an unapproved battery since this could
damage the phone and/or battery and could cause
the battery to explode.
2. Never place your phone in a microwave oven as it will
cause the battery to explode.
3. Never store your phone in temperatures less than
-4°F or greater than 122°F.
4. Do not dispose of your battery by fire or with
hazardous or flammable materials.
5. When riding in a car, do not leave your phone or set
up the hands-free kit near to the air bag. If wireless
equipment is improperly installed and the air bag is
deployed, you may be seriously injured.
6. Do not use a hand-held phone while driving.
7. Do not use the phone in areas where its use is
prohibited. (For example: aircraft)
Important Safety Precautions
1
Important Safety Precautions
1. Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as
a bathroom.
2. Do not use harsh chemicals (such as alcohol, benzene,
thinners, etc.) or detergents to clean your phone. This
Important Safety Precautions
2
could cause a fire.
3. Do not drop, strike, or shake your phone severely. It
may harm the internal circuit boards of the phone.
4. Do not use your phone in high explosive areas as the
phone may generate sparks.
5. Do not damage the power cord by bending, twisting,
pulling, or heating. Do not use the plug if it is loose as
it may cause a fire or electric shock.
6. Do not place any heavy items on the power cord. Do
not allow the power cord to be crimped as it may
cause electric shock or fire.
7. Do not handle the phone with wet hands while it is
being charged. It may cause an electric shock or
seriously damage your phone.
8. Do not disassemble the phone.
1. Do not place or answer calls while charging the phone as it may
short-circuit the phone and/or cause electric shock or fire.
2. Do not hold or let the antenna come in contact with your body
during a call.
3. Make sure that no sharp-edged items such as animal’s teeth or
nails, come into contact with the battery. This could cause a fire.
4. Store the battery out of reach of children.
5. Be careful that children do not swallow any parts (such as
rubber plugs, earphone, connection parts of the phone, etc.)
This could cause asphyxiation or suffocation resulting in serious
injury or death.
6. Unplug the power cord and charger during lightning storms to
avoid electric shock or fire.
7. Only use the batteries and chargers provided by LG. The
warranty will not be applied to products provided by other
suppliers.
8. Only authorized personnel should service the phone and its
accessories. Faulty installation or service may result in accidents
and consequently invalidate the warranty.
9. Your service provider programs one or more emergency phone
numbers, such as 911, that you can call under any
circumstances, even when your phone is locked. Your phone’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be placed
due to network, environmental, or interference issues.
Important Safety Precautions
3
Table of Contents
Important Safety
Precautions1
Table of Contents4
Welcome9
Technical Details10
Important Information10
FCC Part 15 Class B
Tab le o f C on te nt s
Compliance 10
FCC RF Exposure Information 10
Bodily Contact During Operation12
Vehicle-Mounted External
Antenna12
Caution13
Part 15.19 statement13
Part 15.21 statement13
Part 15.105 statement 14
Phone Overview15
Menus Overview17
Getting Started with Your
Phone20
The Battery20
Installing the Battery20
4
Removing the Battery20
Charging the Battery20
Battery Charge Level21
Turning the Phone On and
Off21
Turning the Phone On21
Turning the Phone Off21
Signal Strength22
Screen Icons22
Making Calls22
Correcting Dialing Mistakes23
How to Install Your microSD Card 23
How to Remove Your microSD
Persons with Pacemakers:86
Hearing Aids86
Other Medical Devices86
Health Care Facilities86
Vehicles87
Posted Facilities87
Aircraft87
Blasting Areas87
Potentially Explosive Atmosphere87
For Vehicles Equipped with an Air
Bag88
Charger and Adapter Safety 88
Battery Information and Care88
Safety Information89
Explosion, Shock, and Fire
Hazards89
8
General Warnings and Cautions 91
Warning! Important safety
information92
Avoiding hearing damage92
Using your phone safely93
Using headsets safely 93
FDA Consumer Update93
Consumer Information on
SAR 104
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices 107
Accessories111
Warranty Information112
Index115
Some content in this user guide may
differ from your phone depending on
the phone software. Features and
specifications are subject to change
without prior notice.
Welcome
Thank you for choosing the
advanced and compact
Wine II
cellular phone, designed to
operate with the latest digital
mobile communication
technology, Code Division
Multiple Access (CDMA). Along
with the many advanced features
of the CDMA system, such as
greatly enhanced voice clarity,
this phone offers:
●
Large, easy-to-read, backlit
LCD with status icons.
●
Messaging, voicemail, and
caller ID.
●
24-key keypad.
●
Speakerphone feature.
●
Menu-driven interface with
prompts for easy operation
and configuration.
●
Any key answer, auto answer,
auto retry, one-touch and
speed dialing with 99 memory
locations.
●
Bilingual (English and Spanish)
capabilities.
●
Easy-to-carry, compact and
slim design.
●
Bluetooth®wireless
technology.
●
Animated (available)
Wallpapers.
Note
The Bluetooth®word mark and
logos are owned by the Bluetooth
SIG, Inc. and any use of such marks
by LG Electronics is under license.
Other trademarks and trade names
are those of their respective owners.
Wel c ome
9
Technical Details
Important Information
This user’s guide provides
important information on the use
and operation of your phone.
Please read all the information
carefully prior to using the
phone for the best performance
and to prevent any damage to or
misuse of the phone. Any
unapproved changes or
modifications will void your
Technical Details
warranty.
FCC Part 15 Class B
Compliance
This device and its accessories
comply with part 15 of FCC
rules. Operation is subject to the
following two conditions: (1)
This device and its accessories
may not cause harmful
interference, and (2) this device
and its accessories must accept
any interference received,
10
including interference that
causes undesired operation.
FCC RF Exposure Information
WARNING! Read this
information before operating the
phone.
In August 1996, the Federal
Communications Commission
(FCC) of the United States, with
its action in Report and Order
FCC 96-326, adopted an
updated safety standard for
human exposure to Radio
Frequency (RF) electromagnetic
energy emitted by FCC regulated
transmitters. Those guidelines are
consistent with the safety
standard previously set by both
U.S. and international standards
bodies.
14.4kbps radio link protocol and interband operations
IS-95 adapted for PCS frequency band
cdma2000 1xRTT AirInterface
MAS-BS
PCSC-RS
Intersystem operations
Non-signaling data comm.
Speech CODEC
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
High Speed Packet Data
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
Speech CODEC
Technical Details
11
Technical Details
The design of this phone
complies with the FCC guidelines
and these international
standards.
Bodily Contact During
Operation
This device was tested for typical
use with the back of the phone
kept 0.79 inches (2.0 cm) from
the body. To comply with FCC RF
Technical Details
exposure requirements, a
minimum separation distance of
0.79 inches (2.0 cm) must be
maintained between the user’s
body and the back of the phone,
including the antenna, whether
extended or retracted. Thirdparty belt-clips, holsters and
similar accessories containing
metallic components should not
be used. Avoid the use of
accessories that cannot maintain
0.79 inches (2.0 cm) distance
12
between the user’s body and the
back of the phone and have not
been tested for compliance with
FCC RF exposure limits.
Vehicle-Mounted External
Antenna
(Optional, if available.)
A minimum separation distance of
8 inches (20 cm) must be
maintained between the user/
bystander and the vehiclemounted external antenna to
satisfy FCC RF exposure
requirements. For more
information about RF exposure,
visit the FCC website at
www.fcc.gov.
Caution
Use only the supplied and
approved antenna. Use of
unauthorized antennas or
modifications could impair call
quality, damage the phone, void
your warranty and/or result in
violation of FCC and IC
regulations.
Do not use the phone with a
damaged antenna. If a damaged
antenna comes into contact with
the skin a minor burn may result.
Contact your local dealer for a
replacement antenna.
Part 15.19 statement
This device and its accessories
comply with part15 of FCC rules.
Operation is subject to the
following two conditions:
(1) This device & its accessories
may not cause harmful
interference.
(2) This device & its accessories
must accept any interference
received, including
interference that may cause
undesired operation.
Part 15.21 statement
Change or Modifications that are
not expressly approved by the
manufacturer could void the
user's authority to operate the
equipment.
Technical Details
13
Technical Details
Part 15.105 statement
This equipment has been tested
and found to comply with the
limits for a class B digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates uses and
can radiate radio frequency
Technical Details
energy and, if not installed and
used in accordance with the
instructions, may cause harmful
interference to radio
communications. However, there
is no guarantee that interference
will not occur in a particular
installation. if this equipment
does cause harmful interference
or television reception, which can
be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of
the following measures:
14
- Reorient or relocate the
receiving antenna.
- Increase the separation
between the equipment and
receiver.
- Connect the equipment into an
outlet on a circuit different
from that to which the receiver
is connected.
- Consult the dealer or an
experienced radio/TV
technician for help.
Phone Overview
1. Earpiece Lets you hear the caller and prompts.
2. Flip Open to answer an incoming call and close to
end the call (dependent on the Answer Options, in
Call Settings menu).
3. LCD Screen Displays messages and indicator icons.
4. Left Soft Key Use it on the Standby screen to go to
Messaging or to access the option on the lower-left
corner of the screen.
5. Speakerphone Key
6. SEND Key Use to place or answer calls. Press once
from the standby screen to show your call history.
7. Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
8.
Vibrate Mode Key
the standby screen, press and hold for about 3 seconds).
9. Navigation Key
options. Also acts as a quick access to Brew, the web
Browser, the Calendar, and My Menu from standby mode.
10 . Right Soft Key Use it on the Standby screen to go
to Contacts or to access the option on the
lower-right corner of the screen.
11.
Menu/OK
options.
12 . CLR Key Deletes single spaces or characters with a
quick press. Press and hold to delete the entered
text. When navigating the menus, press to return to
the previous menu.
13 . Shortcut Menu Key
Inbox(Access to the Inbox Menu)
Alarm Clock(Access to the Alarm Clock Menu)
Images(Access to Images Menu)
BREW(Acess to BREW Menu)
14 . PWR/END Key Use to end calls or to return to the
standby screen. Press for 3 seconds to turn the
phone on or off.
15 .
Lock Mode Key
standby screen, press and hold for about 3 seconds).
16 . Microphone Allows other callers to hear you during
a call.
Use to set the speakerphone mode.
Use to set the vibrate mode (from
Use to scroll through the phone's
Key Press to select the highlighted
Use to lock the phone (from the
Phone Overview
15
Phone Overview
Phone Overview
Phone Overview
16
1. Earphone Jack Allows the use of a wired headset.
2. Side Keys Use to adjust the Master volume from
the standby screen and the earpiece volume
during a call. Note that the Master volume can
only be adjusted with the flip open.
3. USB/Charger Port Connects the phone to the
battery charger or other available accessories.
microSDTMSlot Accommodates optional microSD
4.
cards.
5. Camera Key Press for 3 seconds to access the
Camera function.
6. Voice Command Key With the flip open, press
for 3 seconds to access the Voice Command
function.
7. Camera Lens Keep it clean for optimal photo
quality.
TM
Menus Overview
Menu Access
To access the following phone menus, press . Use the Navigation key to
highlight items and to select them.
Messaging
1. New Text Message
2. New Picture
Message
3. Inbox
4. Sent
5. Drafts
6. Voicemail
7. Templates
8. Settings
1. All Messages
2. Text Message
3. Picture Message
4.
Edit Voicemail #
9. Delete All
1. Delete Inbox
2. Delete Sent
3. Delete Drafts
4. Delete All
Messages
Call History
1. Missed Calls
2. Received Calls
3. Dialed Calls
4. All Calls
5. Call Timer
6. Data Counter
Contacts
1. New Contact
2. Contact List
3. Groups
4. Speed Dials
5. My vCard
Multimedia
1. Take Photo
2. Record Video
3. Record Voice
4. Images
5. Videos
6. Sound
7. Shuffle
Menus Overview
17
Menus Overview
BREW
1. BREW Apps
Web
Music
1. Last Played Song
2. All Songs
3. My Playlists
Menus Overview
4. Albums
5. Artists
6. Genres
My Schedule
1. Alarm Clock
2. Calendar
3. Notepad
18
FM Radio
Bluetooth
1. Paired Devices
2. Power
3. My Visibility
4. My Bluetooth
Name
5. My Bluetooth Info
Tools
1. Voice Command
1. Start Command
2. Command
Mode
3. Announce Alert
4. Train Word
5. Best Match
2. My Menu
3. Calculator
4. Ez Tip Calc
5. World Clock
6. Stopwatch
7. Unit Converter
Settings
1. Sound
1. Ringers
2. Volume
3. Message Alerts
4. Alert Type
5. Service Alerts
6. Power On/Off
Tone
7. Flip Tone
2. Display
1. Wallpaper
2. Banner
3. Backlight
4. Menu Style
5. Languages
(Idiomas)
6. Clocks &
Calendar
7. Font Settings
8. Color Schemes
9. Name Match
for Dialing
3. Security
1. Lock Phone
2. Restrictions
3. Emergency #s
4. Change Lock
Code
5. Master Reset
4. Call Settings
1. Answer Options
2. Auto Retry
3. One-Touch Dial
4. Voice Privacy
5. Noise
Cancellation
6. Airplane Mode
7. TTY Mode
5. PC Connection
1. USB Modem
2. USB Mass
Storage
3. Setting
Reminder
6. System
1. Network
2. Location
7. Memory
1. Save Options
2. Phone Memory
3. Card Memory
8. BREW & Web
9. Phone Info.
1. My Number
2. ESN/MEID
3. Icon Glossary
4. Version
Menus Overview
19
Getting Started with Your Phone
The Battery
Note
It is important to fully charge the
battery before initial use of the phone.
Getting Started with Your Phone
Getting Started with Your Phone
The phone comes with a
rechargeable battery. Keep the
battery charged while not in use
in order to maximize talk and
standby time. The battery charge
level is shown at the top of the
LCD screen.
Installing the Battery
Take the battery cover, located
on the back of the phone, off
and insert the battery. Be sure to
align the golden connectors with
the terminals. Press down until
the battery snaps into place.
Removing the Battery
1. Make sure the power is off so
that you do not lose any
unsaved information.
20
2. Slide the battery cover down
and remove it. Use the
opening at the top of the
battery to lift the battery out.
Tip
To remove the battery cover, refer to
the example below.
Charging the Battery
Warning! Use only the charger
provided with the phone. Using
any charger other than the one
included with the
damage your phone or battery.
1. Attach the charger to the
phone. Make sure that the LG
Logo faces down and the ‘B’
Wine II
may
logo faces up when inserting
the plug into the charger port.
2. Plug the charger into a wall
outlet.
NOTICE
Please make sure that
the 'B' Side faces up
before inserting a
charger or data cable
into the charger port
of your phone.
Battery Charge Level
The battery charge level is shown
at the top right of the LCD
screen. When the battery charge
level becomes low, the phone
notifies you in up to three ways:
sounding an audible tone,
blinking the battery icon, and
displaying a warning. If the
battery charge level becomes
exceedingly low, the phone
automatically switches off;
running applications are not
saved.
Getting Started with Your Phone
Turning the Phone On
and Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an
external power source.
2. Press for a 3 seconds
until the LCD screen lights up.
Turning the Phone Off
1. Press and hold until the
display turns off.
21
Getting Started with Your Phone
Signal Strength
Call quality depends on the
signal strength in your area. The
signal strength is indicated on
the screen as the number of bars
Getting Started with Your Phone
next to the signal strength icon
The more bars, the better
the signal strength. If the signal
quality is poor, move to an open
area. If you are in a building, the
reception may be better near a
window.
Note
Call quality can be affected by your
location and by environmental
(such as weather) conditions.
Screen Icons
When the phone is powered on,
the top line of the LCD screen
displays icons indicating the
status of the phone.
22
To see icon information, go to
-> Settings -> Phone Info.->
Icon Glossary
.
Making Calls
1. With the phone turned on,
open the flip.
2. Enter the phone number
(include the area code if
needed).
3. Press .
Note
If the phone is locked, you can only
dial phone numbers saved as
Emergency Numbers. To access and
edit Emergency Numbers, go to:
Menu-> Settings -> Security ->
Enter Lock Code -> ->
Emergency #s.
4. Press to end the call.
Correcting Dialing Mistakes
If you make a mistake while
dialing a number, press
once to erase the last digit
entered or hold down for
at least 2 seconds to erase all
digits.
How to Install Your microSD
Card
1. Locate the microSD slot on
the right side of the phone
and gently uncover the slot
opening. (The microSD slot
cover stays attached to the
phone so it does not become
lost.)
2. Insert the microSD card in the
correct direction (see the
following image) until it clicks
into the slot. If you insert the
card in the wrong direction, it
may damage your phone or
your card.
Getting Started with Your Phone
How to Remove Your
microSD Card
1. Gently push the card in, this
will release the exposed edge
of the microSD card.
2. Remove the microSD card
from the slot and replace the
cover.
Note
Do not attempt to remove the
microSD card while reading or
writing to the card.
Users wishing to transfer music onto
a MicroSD card inserted into this
phone (either through MTP Sync or
Over the Air) must first format the
MicroSD card on this handset.
23
Getting Started with Your Phone
Warning
Formatting the MicroSD card will erase
all contents on the card. In the event
the MicroSD card is used on this phone
without first formatting it, errors may
occur. Song files downloaded or
Getting Started with Your Phone
otherwise purchased from third party
providers (and stored on a MicroSD
card inserted into this device) may be
protected or encrypted by such
provider and may not be playable on
other devices.
Redialing Calls
1. Press twice to redial the
number for the last call placed,
received, or missed. Up to 40
calls are stored in each of the
call history lists (Missed,
Received and Dialed Calls); you
can select one of these to call
that number.
24
Answering Calls
1. Depending on your Answer
Options (see page 74), open
the flip or press to
answer an incoming call.
Note
If you press or the side
keys while the phone is ringing, the
ringing and/or vibration is muted
for that call.
2. Press or close the flip to
end the call.
Quick Access to Convenient Features
Lock Mode
Sets your phone to require a 4digit Lock Code in order to use
the phone.
Note
Until you change it, the default
Lock Code is the last 4 digits of
your phone number.
To quickly lock your phone press
for three seconds. To
unlock, press the Left Soft Key
Unlock, enter the Lock
Code and press .
Mute Function
The Mute Function is used during a
phone call. To quickly activate Mute
press the Left Soft Key
then to cancel press the Left Soft
Key
Unmute.
Mute,
Quick Volume Adjustment
Use the side keys to adjust the
Master volume from the standby
screen and the earpiece volume
during a phone call. The upper
key increases the volume and the
lower key decreases the volume.
Note
Keypad Volume can be adjusted
through the Sound Volume menu:
Menu
Sound
Keypad
Settings
-
>
-
>
Volume
-
>
-
>
Call Waiting
Your cellular service may offer call
waiting. While a call is in
progress, one beep indicates
another incoming call. When call
waiting is enabled, you may put
the active call on hold while you
answer the other incoming call.
Check with your cellular service
provider for information about
this function.
Quick Access to Convenient Features
25
Quick Access to Convenient Features
1. Press to receive a waiting
call.
2. Press again to switch
Quick Access to Convenient Features
between calls.
Caller ID
Caller ID displays the phone
number (if available) or name of the
incoming call. If the caller’s identity
is stored in Contacts, the name will
appear along with the phone
number. Check with your service
provider to ensure they offer this
feature.
Speed Dialing
Speed dialing is a convenient
feature that allows you to make
phone calls quickly. A number key
can be assigned to a specific
phone number. By pressing and
holding down a number key, your
phone will recall the phone
number and dial that phone
number for you. Speed Dial
Number 1 is set to Voice Mailbox
26
by default and cannot be
changed.
Dialing Single Digit Speed
Dials (from 2 to 9)
Press and hold the Speed Dial
number.
OR
Enter the Speed Dial number
and press .
Dialing Double Digit Speed
Dials (from 10 to 99)
Press the first digit and then
press and hold the key of the
second digit.
OR
Enter the first and second
digits and press .
Entering and Editing Information
Text Input
You can input and edit text for
your Banner, Calendar, Contacts,
Alarm Clock, Notepad, and
Messages. When entering text,
several functions are available.
Key Functions
Left Soft Key:
Press to select a Text
Input mode:
-T9Word (T9WORD/
T9Word/ T9word)
- Abc (ABC/Abc/abc)
-123
-Symbols
Shift: Press to change text
entry capitalization
modes:
T9Word:
T9WORD -> T9word
Abc:
-
T9Word ->
Abc -> ABC -> abc
Next: In T9 mode, press
to select the next
matching word.
Space: Press to complete
a word if the entry mode
is set to T9 mode or to
insert a space.
Clear: Press to delete a
single space or
character. Hold to delete
the whole message.
Punctuation: While
entering text, press to
insert punctuation.
Entering and Editing Information
27
Contacts in Your Phone’s Memory
The Basics of Storing
Contacts Entries
1. From standby mode enter the
Contacts in Your Phone’s Memory
phone number you want to
save (up to 48 digits).
2. Press the Left Soft Key
Save.
3. Select either Save New or
Update Existing.
4. Use to highlight a Label
and press .
Mobile 1/ Home 1/ Work 1/
Mobile 2/ Home 2/ Work 2/
Fax
Note
Use
Update Existing
phone number to a contact already
stored in memory.
5. Enter a name for the phone
number (up to 22 characters)
and press .
28
to add the
Phone Numbers With
Pauses
When you call automated
systems, such as voice mail or
credit billing numbers, you often
have to enter a series of numbers
to navigate through the system.
Instead of entering these
numbers by hand, you can store
the numbers in your Contacts
separated by special pause
characters (W, P). There are two
different types of pauses you can
use when storing a number:
Wait (W )
The phone stops dialing until you
press the Left Soft Key
Release
to advance to the next
number.
Pause (P)
The phone waits 2 seconds
before sending the next string of
digits.
Loading...
+ 91 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.