Please read this installation manual completely before installing the product.
Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
Please retain this installation manual for future reference after reading it thoroughly.
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool excessively indoors. This may be harmful for your health and may consume more
electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air
conditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the
air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
SAFETY INSTRUCTIONS
The following symbols are displayed on indoor and outdoor units.
SAFETY INSTRUCTIONS
3
ENGLISH
Read the precautions in this manual
carefully before operating the unit.
This symbol indicates that the
Operation Manual should be read
carefully.
This appliance is filled with
flammable refrigerant (R32)
This symbol indicates that a service
personnel should be handling this
equipment with reference to the
Installation Manual.
The following safety guidelines are intended to prevent unforeseen
risks or damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as
described below.
This symbol is displayed to indicate matters and operations
!
that can cause risk.
Read the part with this symbol carefully and follow the
instructions in order to avoid risk.
WARNING
!
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
!
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
WARNING
!
Installation
• Compliance with national gas regulations shall be observed.
• Do not use a defective or underrated circuit breaker. Use this
appliance on a dedicated circuit.
- There is risk of fire or electric shock.
• For electrical work, contact the dealer, seller, a qualified
electrician, or an Authorized Service Center.
- Do not disassemble or repair the product. There is risk of fire
or electric shock.
• Always ground the product.
- There is risk of fire or electric shock.
SAFETY INSTRUCTIONS
4
ENGLISH
• Install the panel and the cover of control box securely.
- There is risk of fire or electric shock.
• Always install a dedicated circuit and breaker.
- Improper wiring or installation may cause fire or electric
shock.
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric shock.
• Do not modify or extend the power cable.
- There is risk of fire or electric shock.
• Do not install, remove, or re-install the unit by yourself
(customer).
- There is risk of fire, electric shock, explosion, or injury.
• Be cautious when unpacking and installing the product.
- Sharp edges could cause injury. Be especially careful of the
case edges and the fins on the condenser and evaporator.
• For installation, always contact the dealer or an Authorized
Service Center.
- There is risk of fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand.
- It may cause injury, accident, or damage to the product.
• Be sure the installation area does not deteriorate with age.
- If the base collapses, the air conditioner could fall with it,
causing property damage, product failure, and personal injury.
• Do not turn on the breaker or power under condition thatfront
panel, cabinet, top cover, control box cover are removed or
opened.
- Otherwise, it may cause fire, electric shock, explosion or
death.
• Use a vacuum pump or Inert (nitrogen) gas when doing
leakage test or air purge. Do not compress air or Oxygenand
Do not use Flammable gases. Otherwise, it may cause fire or
explosion.
- There is the risk of death, injury, fire or explosion.
• Have all electric work done by a licensed electrician according
to “Electric Facility Engineering Standard” and “Interior Wire
Regulations” and the instructions given in this manual and
always use a special circuit.
- If the power source capacity is inadequate or electric work is
performed improperly, electric shock or fire may result.
SAFETY INSTRUCTIONS
• A brazed, welded, or mechanical connection shall be made
before opening the valves to permit refrigerant to flowbetween
the refrigerating system parts.
• Always insert the filter securely. Clean the filter every two
weeks or more often if necessary.
- A dirty filter reduces the efficiency of the air conditioner and
could cause product malfunction or damage.
• The appliance shall be stored in a room without continuously
operating ignition sources (for example: open flames, an
operating gas appliance or an operating electric heater.)
• Keep any required ventilation openings clear of obstruction.
• Mechanical connections shall be accessible for maintenance
purposes.
• Always intstall a dedicated circuit and breaker.
- Improper wiring or installation may cause fire or electric
shock.
• Do not let the air conditioner run for a long time when the
humidity is very high and a door or a window is left open.
- Moisture may condense and wet or damage furniture•
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• Any person who is involved with working on or breaking into a
refrigerant circuit should hold a current valid certificatefrom an
industry-accredited assessment authority, which authorises
their competence to handle refrigerants safely inaccordance
with an industry recognised assessment specification. (for
R32)
• Be cautious that water could not enter the product.
- There is risk of fire, electric shock, or product damage.
• Do not allow water to run into electric parts.
- There is risk of fire, failure of the product, or electric shock.
• Do not block the inlet or outlet of air flow.
- It may cause product failure.
• Do not drink the water drained from the product.
- It is not sanitary and could cause serious health issues.
5
ENGLISH
Operation
• Do not let the air conditioner run for a long time when the
humidity is very high and a door or a window is left open.
SAFETY INSTRUCTIONS
6
ENGLISH
- Moisture may condense and wet or damage furniture.
• Do not open the inlet grill of the product during operation. (Do
not touch the electrostatic filter, if the unit is so equipped.)
- There is risk of physical injury, electric shock, or product
failure.
• Do not place a heater or other appliances near the power
cable.
- There is risk of fire and electric shock.
• Do not place anything on the power cable.
- There is risk of fire or electric shock.
• Do not plug or unplug the power supply plug during operation.
- There is risk of fire or electric shock.
• Do not recharge or disassemble the batteries. Do not dispose
of batteries in a fire.
- They may burn or explode.
• Do not step on or put anything on the product. (outdoor units)
- There is risk of personal injury and failure of product.
• Do not touch the metal parts of the product when removing
the air filter. They are very sharp!
- There is risk of personal injury.
• Do not touch(operate) the product with wet hands.
- There is risk of fire or electrical shock.
• When mechanical connectors are reused indoors, sealing parts
shall be renewed. (for R32)
• When flared joints are reused indoors, the flare part shall be refabricated. (for R32)
• Periodic ( more than once/year ) cleaning of the dust or salt
particles stuck on the heat exchanger by using water.
• Do not use means to accelerate the defrosting process or to
clean, other than those recommended by the manufacturer.
• Do not pierce or burn refrigerant cycle part.
• Be aware that refrigerants may not contain an odour.
CAUTION
!
Installation
• Do not install the unit in potentially explosive atmospheres.
• Always check for gas (refrigerant) leakage after installation or
repair of product.
- Low refrigerant levels may cause failure of product.
SAFETY INSTRUCTIONS
• Install the drain hose to ensure that water is drained away
properly.
- A bad connection may cause water leakage.
• Keep level even when installing the product.
- To avoid vibration or water leakage.
• Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system.
- There is risk of damage or loss of property.
• Use two or more people to lift and transport the product.
- Avoid personal injury.
• Do not use the product in a tightly closed space for a long
time.
- Oxygen deficiency could occur.
• Flexible refrigerant connectors (such as connecting lines
between the indoor and outdoor unit) that may be
displacedduring normal operations shall be protected against
mechanical damage.
• The appliance shall be stored so as to prevent mechanical
damage from occurring.
• Refrigerant tubing shall be protected or enclosed to avoid
damage.
• If strange sounds, smell or smoke comes from product. Turn
the breaker off or disconnect the power supply cable.
- There is risk of electric shock or fire.
• The installation of pipe-work shall be kept to a minimum.
• Pipe-work shall be protected from physical damage.
• If the liquid from the batteries gets onto your skin or clothes,
wash it well with clean water. Do not use the remote if the
batteries have leaked.
- The chemicals in batteries could cause burns or other health
hazards.
• Dismantling the unit, treatment of the refrigerant oil and
eventual parts should be done in accordance with local and
national standards.
• If anyone other than a licensed Professional installs, repairs, or
alters LG Electronics air conditioning Products, the warranty is
voided.
- All costs associated with repair are then the full responsibility
of the owner.
7
ENGLISH
SAFETY INSTRUCTIONS
8
ENGLISH
• Means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
• If you eat the liquid from the batteries, brush your teeth and
see doctor. Do not use the remote if the batteries have leaked.
- The chemicals in batteries could cause burns or other health
hazards.
• Replace the all batteries in the remote control with new ones
of the same type. Do not mix old and new batteries or
different types of batteries.
- There is risk of fire or explosion.
• Stop operation and close the window in storm or hurricane. If
possible, remove the product from the window before the
hurricane arrives.
- There is risk of property damage, failure of product, or electric
shock.
• Take care to ensure that nobody could step on or fall onto the
outdoor unit.
- This could result in personal injury and product damage.
• Take care to ensure that power cable could not be pulled out
or damaged during operation.
- There is risk of fire or electric shock.
• The appliance shall be stored in a well-ventilated area where
the room size corresponds to the room area as specified for
operation. (for R32)
• To prevent the mixing of different types of refrigerants, be
sure to check the type of refrigerant used in the outdoor unit.
• Turn the main power off when cleaning or maintaining the
product.
- There is risk of electric shock.
• Use a firm stool or ladder when cleaning or maintaining the
product.
- Be careful and avoid personal injury.
• Use a soft cloth to clean. Do not use harsh detergents,
solvents, etc.
- There is risk of fire, electric shock, or damage to the plastic
parts of the product.
• Ventilate the product from time to time when operating it
together with a stove, etc.
- There is risk of fire or electric shock.
SAFETY INSTRUCTIONS
• When flammable gas leaks, turn off the gas and open a
window for ventilation before turn the product on.
- Do not use the telephone or turn switches on or off. There is
risk of explosion or fire.
• When the product is not be used for a long time, disconnect
the power supply plug or turn off the breaker.
- There is risk of product damage or failure, or unintended
operation.
• When the product is soaked (flooded or submerged), contact
an Authorized Service Center.
- There is risk of fire or electric shock.
• Servicing shall only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiringthe
assistance of other skilled personnel shall be carried out under
the supervision of the person competent in the use
offlammable refrigerants. (for R32)
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Operation
9
ENGLISH
• Do not expose the skin directly to cool air for long periods of
time. (Don't sit in the draft.)
- This could harm to your health.
• Do not insert hands or other objects through the air inlet or
outlet while the product is operated.
- There are sharp and moving parts that could cause personal
injury.
• Do not store or use flammable gas or combustibles near the
product.
- There is risk of fire or failure of product.
• Do not install the product where it will be exposed to sea wind
(salt spray) directly.
- It may cause corrosion on the product. Corrosion, particularly
on the condenser and evaporator fins, could cause product
malfunction or inefficient operation.
• Do not install the product where the noise or hot air from the
outdoor unit could damage the neighborhoods.
- It may cause a problem for your neighbors.
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.