LG 84UB980T Quick Setup Guide
SMART TV Quick Setup Guide
Please call LG Customer Service if you experience any problems.
*Mbm63817872*
Network Settings Troubleshooting Network Problems
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the Operating System (OS).
* App icon positions may vary on the platform, depending on the software version.
Wireless Network Connection
* Applicable for wi- ready models only.
LG wireless dongle is sold seperately.
or
* Applicable for wi- models only.
Wireless AP (Router)
Wired Network Connection
* For a stable Internet connection, it is recommended to use a wired connection or place the wireless router close
to the TV.
Internet connection
Press the (Home) button on the remote to
1
access the Home menu. Highlight the (Settings)
icon and select by pressing the Wheel(OK) button
on the remote.
Select the Network → Wired Connection or
2
Wi-Fi Connection.
NETWORK
Quick
Picture
TV Name ꕍ
LG Smart TV
Wired Connection (Ethernet)
Sound
Not Connected
Wi-Fi Connection
Not Connected
Network
Wi-Fi Direct
LG Connect Apps
General
Safety
Accessibility
The device automatically tries to connect to the
3
network available (wired network first).
When you select the Wi-Fi Connection, the
network list available is displayed. Choose the
network you wish to use.
WI-FI
Quick
Picture
WI-FI : AAA
WI-FI : BBB
Sound
WI-FI : CCC
WI-FI : DDD
Network
WI-FI : EEE
General
Add a hidden wireless network
Connect via WPS PBC.
Safety
Connect via WPS PIN.
Advanced settings
Accessibility
If the connection is successful, the "Connected to
4
Internet" network is displayed.
NETWORK
Quick
Picture
TV Name ꕍ
LG Smart TV
Wired Connection (Ethernet)
Sound
Not Connected
Wi-Fi Connection
Connected to Internet
Network
General
Safety
Accessibility
Wi-Fi Direct
LG Connect Apps
You can check the status of connection in
Advanced Settings.
Quick
Picture
Sound
Network
General
Safety
Accessibility
WI-FI
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced settings
Press the (Home) button on the remote to access
1
the Home menu. Highlight the (Settings) icon
and select by pressing the Wheel(OK) button on
the remote.
Select the Network → Wired Connection or
2
Wi-Fi Connection → Advanced Settings.
NETWORK
Quick
Picture
TV Name ꕍ
LG Smart TV
Wired Connection (Ethernet)
Sound
Not Connected
Wi-Fi Connection
Not Connected
Network
Wi-Fi Direct
LG Connect Apps
General
Safety
Accessibility
→
Quick
Picture
Sound
Network
General
Safety
Accessibility
WI-FI
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced settings
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
Check the connection status of the TV, AP (Router).
1
Power off and power on the TV, AP (Router).
2
If you are using a static IP, enter the IP directly.
3
Contact internet service provider or AP (Router)
4
company.
Check the AP (Router) or consult your
Internet service provider.
When X appears next to Gateway:
Unplug the power cord of the AP (Router) and try to
1
connect after 5 seconds.
Initialize (Reset) the AP (Router).
2
Contact internet service provider or AP (Router)
3
company.
When X appears next to DNS:
Unplug the power cord of the AP (Router) and try to
1
connect after 5 seconds.
Initialize (Reset) the AP (Router).
2
Check that the MAC address of the TV/AP (Router)
3
is registered with your Internet service provider.
(The MAC address displayed on the right pane of
the network status window should be registered with
your Internet service provider.)
Check the AP (Router) manufacturer’s website
4
to make sure your router has the latest firmware
version installed.
P/NO : MBM63817872 (1504-REV03)
Printed in Korea
For wireless AP (Router) that have the symbol,
you need to enter the security key.
Wired router
SMART TV Quick Setup Guide
Please call LG Customer Service if you experience any problems.
Updating the TV Firmware
Miracast Setting
Installing & Setting
Install the SmartShare PC SW programme on your PC.
1
www.lg.com
Go to
2
Select SUPPORT. Then, search for your model.
3
Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW.
4
You can run the programme when installation is complete.
5
NOTE
ySmartShare service is only available if TV and other devices are connected via a single AP (Router).
. Then, select your region.
SmartShare Connection to Smartphone
* If the TV is turned on for the first time after software update, initialization of the TV may take up to one minute.
(
Home
) → (Settings) → General → About This TV → CHECK FOR UPDATES
After checking the version of the software, update it.
If you check the "Allow Automatic Updates", you can update the software automatically.
Quick
Picture
Sound
Network
General
Safety
Accessibility
GENERAL
Language
Location
Time & Date
Timers
Motion Recognition
Launch Account Management
Standby Light ꕍ
On
Home/Store Mode
Eco Mode
SIMPLINK
Reset to Initial Settings
About This TV
ABOUT THIS TV
Quick
Picture
Software Version xx.xx.xx ꕌ
CHECK FOR UPDATES
Sound
Network
General
Safety
Accessibility
Allow Automatic Updates
Model WEBOSx
Serial Number xxxxxxxx
Device Name LG Smart TV
webOS Version x.x.x-xxxx
User Agreements
Open Source Software Notice
Set ID : 1
99 ꕍ
1
Wi-Fi Direct Setting
(Home) → (Settings) → Network → Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct.
With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct.
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
(
Home
) → Screen Share
Miracast should be set to "ON" on your portable device.
1
When your TV is detected, select the device on your portable device.
2
When connection is completed, the TV screen appears on the device screen.
WiDi (Wireless Display) Setting
Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet network
for mirrored and dual monitor display on your TV. You can sit back and experience your favorite movies, videos,
photos, online shows and more in full HD on your TV with great image clarity and sound.
Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local
1
network.
Install/run the app for sharing content on your smartphone (It's called SmartShare on LG phones).
2
Enable your smartphone to share content files with other devices.
3
Open SmartShare application. (Home) → SmartShare.
4
Select the file type you want to play (movie, audio or photo).
5
Select a movie, music or photo file to play on the TV.
6
Play the media file to view and enjoy it on your TV.
7
If Wi-Fi Direct is set to ON, a list of available devices appears.
1
WI-FI DIRECT
Quick
Picture
WI-FI : AAA
WI-FI : BBB
Sound
WI-FI : CCC
WI-FI : DDD
Network
WI-FI : EEE
General
Safety
Accessibility
When you are prompted to request connection, select Yes. Wi-Fi Direct is now connected to your TV.
2
REFRESH LIST
ON
* If you are not using Wi-Fi Direct to minimize the interference between Wi-Fi devices, it is recommended to set
Wi-Fi Direct to Off. You can only use devices that support Wi-Fi Direct.
(
Home
) → Screen Share
Intel's WiDi is set to On. Connect your laptop to AP (Router). (Without AP, it is possible to use this function; it
1
is recommended to connect to AP.) Your laptop runs the Intel WiDi programme.
It detects LG Smart TVs available, which supports WiDi. In the list, select the TV you want and click Connect.
2
Enter the number shown on the screen into the input field (a) on your laptop and then click Continue.
********
a
Notebook Screen
The laptop scrren appears on the TV screen. The wireless environment may affect the screen display. If the
3
connection is poor, the Intel WiDi connection may be lost.
* LG TVs do not need to register.
* For more information on Intel WiDi, visit
* You can control your PC using the Magic Remote.
'http://intel.com/go/widi'
.
Loading...