LG 84LA9800 Owner’s Manual

OWNER’S MANUAL

LED TV*

* LG LED TV refers to an LCD screen with LED backlights.

Please read this manual carefully before operating your set
and retain it for future reference.

55LA9650
65LA9650

55LA9700
65LA9700

84LA9800

www.lg.com

2

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

Do not place the TV and/or

y

remote control in the following
environments:

- A location exposed to direct sunlight

- An area with high humidity such as a
bathroom

- Near any heat source such as stoves
and other devices that produce
heat

- Near kitchen counters or humidifiers
where they can easily be exposed
to steam or oil

- An area exposed to rain or wind

- Near containers of water such as
vases
Otherwise, this may result in fire,
electric shock, malfunction or
product deformation.

Do not place the product where

y

it might be exposed to dust. This
may cause a fire hazard.

Desiccant

ENGLISH

Mains Plug is the TV connecting/

y

disconnecting device to AC
mains electric supply. This plug
must remain readily attached and
operable when TV is in use.

Do not touch the power plug with

y

wet hands. Additionally, if the cord
pin is wet or covered with dust, dry
the power plug completely or wipe
dust off. You may be electrocuted
due to excess moisture.

Make sure to connect Mains cable

y

to compliant AC mains socket with
Grounded earth pin. (Except for
devices which are not grounded on
earth.) Otherwise possibility you
may be electrocuted or injured.

Insert power cable plug completely

y

into wall socket otherwise if not
secured completely into socket, fire
ignition may break out.

Ensure the power cord does not

y

come into contact with hot objects
such as a heater. This may cause a
fire or an electric shock hazard.

Do not place a heavy object, or the

y

product itself, on power cables.
Otherwise, this may result in fire or
electric shock.

Bend antenna cable between inside

y

and outside building to prevent rain
from flowing in. This may cause
water damaged inside the Product
and could give an electric shock.

When mounting TV onto wall make

y

sure to neatly install and isolate
cabling from rear of TV as to not
create possibility of electric shock /
fire hazard.

Do not plug too many electrical

y

devices into a single multiple
electrical outlet. Otherwise, this
may result in fire due to over­heating.

Do not drop the product or let it

y

fall over when connecting external
devices. Otherwise, this may result
in injury or damage to the product.

Keep the anti-moisture packing

y

material or vinyl packing out of the
reach of children. Anti-moisture
material is harmful if swallowed.
If swallowed by mistake, force
the patient to vomit and visit the
nearest hospital. Additionally, vinyl
packing can cause suffocation.
Keep it out of the reach of children.

Do not let your children climb or

y

cling onto the TV. Otherwise, the
TV may fall over, zwhich may cause
serious injury.

Dispose of used batteries carefully

y

to ensure that a small child does
not consume them. Please
seek Doctor- Medical Attention
immediately if child consumes
batteries.

Do not insert any metal objects/

y

conductors (like a metal chopstick/
cutlery/ screwdriver) between
power cable plug and input Wall
Socket while it is connected to
the input terminal on the wall.
Additionally, do not touch the
power cable right after plugging
into the wall input terminal. You
may be electrocuted. (Depending
on model)

Do not put or store inflammable

y

substances near the product. There
is a danger of combustion/explosion
or fire due to careless handling of
the inflammable substances.

Do not drop metallic objects such

y

as coins, hair pins, chopsticks
or wire into the product, or
inflammable objects such as paper
and matches. Children must pay
particular attention. Electrical
shock, fire or injury can occur. If a
foreign object is dropped into the
product, unplug the power cord and
contact the service centre.

Do not spray water on the product

y

or scrub with an inflammable
substance (thinner or benzene).
Fire or electric shock accident can
occur.

Do not allow any impact, shock

y

or any objects to fall into the unit,
and do not drop anything onto the
screen. You may be injured or the
product can be damaged.

Never touch this product or antenna

y

during a thunder or lighting storm.
You may be electrocuted.

Never touch the wall outlet when

y

there is leakage of gas, open the
windows and ventilate. It may
cause a fire or a burn by a spark.

Do not disassemble, repair or

y

modify the product at your own
discretion. Fire or electric shock
accident can occur. Contact the
service centre for check, calibration
or repair.

If any of the following occur, unplug

y

the product immediately and
contact your local service centre.

- The product has been impacted by
shock

- The product has been damaged

- Foreign objects have entered the
product

- The product produced smoke or a
strange smell

This may result in fire or electric

shock.
Unplug the TV from AC mains wall

y

socket if you do not intend to use
the TV for a long period of time.
Accumulated dust can cause fire
hazard and insulation deterioration
can cause electric leakage/shock/
fire.

Apparatus shall not be exposed to

y

dripping or splashing and no objects
filled with liquids, such as vases,
shall be placed on the apparatus.

SAFETY INSTRUCTIONS

CAUTION

Install the product where no

y

radio wave occurs.

There should be enough distance

y

between an outside antenna and
power lines to keep the former
from touching the latter even
when the antenna falls. This may
cause an electric shock.

Do not install the product on

y

places such as unstable shelves
or inclined surfaces. Also avoid
places where there is vibration
or where the product cannot
be fully supported. Otherwise,
the product may fall or flip
over, which may cause injury or
damage to the product.

If you install the TV on a stand,

y

you need to take actions to
prevent the product from
overturning. Otherwise, the
product may fall over, which may
cause injury.

If you intend to mount the product to a wall, attach

y

VESA standard mounting interface (optional parts) to
the back of the product. When you install the set to
use the wall mounting bracket (optional parts), fix it
carefully so as not to drop.

Only use the attachments / accessories specified by

y

the manufacturer.

When installing the antenna,

y

consult a qualified service man.
This may create a fire hazard or
an electric shock hazard.

We recommend that you

y

maintain a distance of at least 2
to 7 times the diagonal screen
size when watching TV. If you
watch TV for a long period of
time, this may cause blurred
vision.

Only use the specified type

y

of battery. This could cause
damage to the remote control.

Do not mix new batteries with

y

old batteries. This may cause the
batteries to overheat and leak.
Used batteries including

y

rechargeable battery must
be collected separately and
recycled.

Make sure there are no objects

y

between the remote control and
its sensor.

3

ENGLISH

4

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Signal from Remote Control can

y

be interrupted due to external/
internal lighting eg Sunlight,
fluorescent lighting. If this
occurs turn off lighting or darken
viewing area.

When connecting external

y

devices such as video game
consoles, make sure the
connecting cables are long
enough. Otherwise, the product
may fall over, which may cause
injury or damage the product.

Do not turn the product On/Off

y

by plugging-in or unplugging the
power plug to the wall outlet.
(Do not use the power plug for
switch.) It may cause mechanical
failure or could give an electric
shock.

Please follow the installation

y

instructions below to prevent the
product from overheating.

- The distance between the product

and the wall should be more
than 10 cm.

- Do not install the product in a

place with no ventilation (e.g., on
a bookshelf or in a cupboard).

- Do not install the product on a

carpet or cushion.

- Make sure the air vent is not

ENGLISH

Periodically examine the cord of your appliance, and

y

if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by
an authorized servicer.

blocked by a tablecloth or
curtain.

Otherwise, this may result in fire.

Take care not to touch the

y

ventilation openings when
watching the TV for long periods
as the ventilation openings may
become hot. This does not affect
the operation or performance of
the product.

Prevent dust collecting on the

y

power plug pins or outlet. This
may cause a fire hazard.

Do not press strongly upon the

y

panel with a hand or sharp object
such as nail, pencil or pen, or
make a scratch on it, as it may
cause damage to screen.

Avoid touching the screen or

y

holding your finger(s) against it
for long periods of time. Doing so
may produce some temporary or
permanent distortion/damage to
screen.

When cleaning the product and

y

its components, unplug the
power first and wipe it with a
soft cloth. Applying excessive
force may cause scratches or
discolouration. Do not spray with
water or wipe with a wet cloth.
Never use glass cleaner, car or
industrial shiner, abrasives or
wax, benzene, alcohol etc., which
can damage the product and its
panel. Otherwise, this may result
in fire, electric shock or product
damage (deformation, corrosion or
breakage).

As long as this unit is connected to the AC wall

y

outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.

When unplugging the cable, grab

y

the plug and unplug it, by pulling
at the plug. Don’t pull at the cord
to unplug the power cord from
the power board, as this could be
hazardous.

When moving the product, make

y

sure you turn the power off first.
Then, unplug the power cables,
antenna cables and all connecting
cables. The TV set or power cord
may be damaged, which may
create a fire hazard or cause
electric shock.

When moving or unpacking the

y

product, work in pairs because the
product is heavy. Otherwise, this
may result in injury.

Contact the service centre once

y

a year to clean the internal parts
of the product. Accumulated dust
can cause mechanical failure.

Protect the power cord from

y

physical or mechanical abuse,
such as being twisted, kinked,
pinched, closed in a door, or
walked upon. Pay particular
attention to plugs, wall outlets,
and the point where the cord
exits the appliance.

Refer all servicing to qualified

y

service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.

If the product feels cold to the

y

touch, there may be a small
“flicker” when it is turned on. This
is normal, there is nothing wrong
with product.

The panel is a high technology

y

display product with resolution of
two million to six million pixels.
You may see tiny black dots and/
or brightly coloured dots (red, blue
or green) at a size of 1 ppm on
the panel. This does not indicate
a malfunction and does not affect
the performance and reliability of
the product. This phenomenon
also occurs in third-party products
and is not subject to exchange or
refund.

You may find different brightness

y

and colour of the panel depending
on your viewing position(left/right/
top/down). This phenomenon
occurs due to the characteristic of
the panel. It is not related with the
product performance, and it is not
malfunction.

SAFETY INSTRUCTIONS

Displaying a still image (e.g., broadcasting channel

y

logo, on-screen menu, scene from a video game) for
a prolonged time may cause damage to the screen,
resulting in retention of the image, which is known
as image sticking. The warranty does not cover the
product for image sticking.
Avoid displaying a fixed image on your television’s
screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma). Also, if you
watch the TV at a ratio of 4:3 for a long time, image
sticking may occur on the borders of the panel. This
phenomenon also occurs in third-party products and
is not subject to exchange or refund.

Generated Sound

y

“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated
by plastic thermal contraction due to tempera-ture
and humidity. This noise is common for products
where thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level noise
is generated from a high-speed switching circuit,
which supplies a large amount of current to operate
a product. It varies depending on the product. This
generated sound does not affect the performance
and reliability of the product.

5

ENGLISH

WARNING

If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.

CAUTION

If you ignore the caution message, you may be
slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the
product safely. Please read the note carefully
before using the product.

6

SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment

Viewing Time

y

- When watching 3D content, take 5 - 15
minute breaks every hour. Viewing 3D
content for a long period of time may
cause headache, dizziness, fatigue or eye
strain.

Those that have a photosensitive seizure or
chronic illness

Some users may experience a seizure or

y

other abnormal symptoms when they are
exposed to a flashing light or particular
pattern from 3D content.
Do not watch 3D videos if you feel

y

nauseous, are pregnant and/ or have a
chronic illness such as epilepsy, cardiac
disorder, or blood pressure disease, etc.
3D Content are not recommended for

y

those who suffer from stereo blindness
or stereo anomaly. Double images or

ENGLISH

discomfort in viewing may be experienced.
If you have strabismus (cross-eyed),

y

amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images.
It is advised to take more frequent breaks
than the average adult.
If your eyesight varies between your right

y

and left eye, revise your eyesight prior to
watching 3D content.

CAUTION

Viewing Environment

Viewing Distance

y

- Maintain a distance of at least twice the
screen diagonal length when watching 3D
content.
If you feel discomfort in viewing 3D
content,
move further away from the TV.

Viewing Age

Infants / Children

y

- Usage/ Viewing 3D content for children
under the age of 5 is prohibited.

- Children under the age of 10 may
overreact and become overly excited
because their vision is in development.
For example: trying to touch the screen or
trying to jump into it. Special monitoring
and extra attention is required for children
watching 3D content.

- Children have greater binocular disparity of
3D presentations than adults because the
distance between the eyes is shorter than
one of adults. Therefore they will perceive
more stereoscopic depth compared to
adults for the same 3D image.

Teenagers

y

- Advise teenagers under the age of 19 not
to watch 3D videos for a long time when
they are tired.

Elderly

y

- The elderly may perceive less of a 3D
effect than the youth. Do not sit closer to
the TV than the recommended distance.

Cautions when using the 3D glasses

Symptoms which require discontinuation or
refraining from watching 3D content

Do not watch 3D content when you feel

y

fatigue from lack of sleep, overwork, or
intoxication .
When these symptoms are experienced,

y

stop using/watching 3D content and get
enough rest until the symptom subsides.

- Consult your doctor when the symptoms
persist. Symptoms may include headache,
eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image,
visual inconvenience, or fatigue.

Make sure to use LG 3D glasses.

y

Otherwise, you may not be able to view
3D videos properly.
Do not use 3D glasses instead of your

y

normal glasses, sunglasses ,or protective
goggles.
Using modified 3D glasses may cause eye

y

strain or image distortion.
Do not keep your 3D glasses in extremely

y

high or low temperatures. It will cause
deformation.
The 3D glasses are fragile and are easy to

y

scratched. Use a soft, clean piece of cloth
when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp
objects or clean/wipe them with chemicals.

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.

Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.

“DivX Certified
content.”

®

“DivX
Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”

®

to play DivX® video up to HD 1080p, including premium

, DivX Certified® and associated logos are trademarks of Rovi

®

device must be

7

ENGLISH

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS

2.0+Digital Out is a trademark of DTS, Inc. Product includes software. ©
DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit ‘http://opensource.lge.com’.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to ‘[e-mail]’. This offer is valid for three (3) years from the date on which you purchased
the product.

TABLE OF CONTENTS

8

TABLE OF CONTENTS

2 SAFETY INSTRUCTIONS

6 Viewing 3D Imaging

7 LICENSES

7 OPEN SOURCE SOFTWARE NOTICE

8 TABLE OF CONTENTS

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking
12 Optional Extras
13 Parts and Buttons
16 Lifting and Moving the TV
17 Setting up the TV

17 - Attaching the Stand
20 - Mounting on a Table
21 - Tidying Cables
22 - Mounting on a Wall

ENGLISH

24 - Using Sliding Speaker
24 Using Built-in Camera

25 - Preparing Built-in Camera
25 - Name of Parts for the Built-In Camera
25 - Checking the Camera’s Shooting Range

37 MAGIC REMOTE CONTROL FUNCTIONS

38 Registering Magic Remote Control
38 How to use Magic Remote Control
38 Precautions to Take when Using the Magic

Remote Control

39 REMOTE CONTROL

41 USING THE USER GUIDE

42 SPECIFICATIONS

47 EXTERNAL CONTROL DEVICE SETUP

48 MAINTENANCE

48 Cleaning Your TV
48 - Screen, Frame, Cabinet and Stand
48 - Power Cord

48 TROUBLESHOOTING

26 MAKING CONNECTIONS

26 Connecting to an Antenna or Cable
27 Connecting to a HD Receiver, DVD Player, or

VCR
27 - HDMI Connection
28 - DVI to HDMI Connection
29 - Connecting to a Mobile Phone
30 - Component Connection
31 - Composite Connection

32 Connecting to a PC
32 - HDMI Connection or DVI to HDMI

Connection

34 Connecting to an Audio System
34 - Digital Optical Audio Connection

35 Connecting Headphones
36 Connecting a USB Drive

NOTE

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may

y

differ slightly from that shown in this
manual.
The available menus and options may

y

differ from the input source or product
model that you are using.
New features may be added to this TV in

y

the future.

INSTALATION PROCEDURE / ASSEMBLING AND PREPARING

≤

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

1

Attach the stand to the TV set.

2

Connect an external device to the TV set.

3

Make sure the network connection is available.

4

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

9

ENGLISH

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

In case of some model, the thin film on screen is a part of TV, So don’t take it off.

y

NOTE

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

y

upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

y

thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not

y

fit into your TV’s USB port.

B

A

B

A

*A ≤ 10 mm
*B

18 mm

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

10

Magic Remote Control,
Batteries (AA)

(See p. 37)

Cable Holder

(See p. 21, 22)

ENGLISH

Stand Base

(See p. 17)

Remote control and
Batteries (AAA)

(See p. 39)

(For 84LA9800)

Stand Screws

4 EA, M4 x 20
6 EA, M5 x 16
(See p. 19)

(For 55/65LA9700)(For 55/65LA9650)

Stand Base

(See p. 18)

Owner’s Manual

(For 55LA9700, 55/65LA9650)

Stand Screws

4 EA, M4 x 14
(See p. 17, 18)

(For 84LA9800)

Stand Body, Stand Base

(See p. 19)

Component Video Cable

(See p. 30)

Composite Video Cable

(See p. 30, 31)

Power Cord

(Depending on model)

(For 55/65LA9700)

ASSEMBLING AND PREPARING

Tag On

11

Wall Mount Inner Spacers

4 EA
(See p. 23)

(For 55LA9700)

Wall Mount Screws

4 EA, M6 x 54

Cinema 3D Glasses

The number of 3D glasses
may differ depending on the
model or country.

(For 65LA9700)

Wall Mount Screws

4 EA, M8 x 44

Tag On

(Depending on model)

ENGLISH

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

12

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed due to the manufacturer’s circumstances or policies.

AN-MR400

Magic Remote

LG Audio device Tag On AN-VC5**

AG-F***

Cinema 3D Glasses

Tag On

ENGLISH

Wall mount bracket

LSW430B

Compatibility

AN-MR400 Magic remote

AG-F*** Cinema 3D glasses

Wall mount bracket

LSW630B

LA9650 LA9700 LA9800

• • •

• • •

AG-F***DP

Dual Play Glasses

Video Call Camera

AN-BL***

Wireless IR Blaster
(Depending on model)

AG-F***DP Dual Play Glasses

AN-VC5** Video Call Camera

Tag On

LG Audio device

• • •

•

(Built-in)

• • •

• • •

•

Parts and Buttons

(For LA9650 Series)

Screen

ASSEMBLING AND PREPARING

OK

SETTINGS

INPUT

13

Speakers

Remote control sensor

Power Indicator

Button Description

/ ( / )

/ ( / )

)

(OK

(

SETTINGS

(

INPUT

( )

)

)

Scrolls through the saved channels.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

Accesses the main menus, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

CAUTION

To avoid possible SPEAKER damage or degradation in performance

y

please keep contact of TV /Speaker out of reach of Children.
(For 55/65LA9650)

Buttons

ENGLISH

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

SETTINGS

INPUT

OK

14

(For LA9700 Series)

ENGLISH

Screen

Speakers

Video call camera

Buttons

Remote control sensor

Power Indicator

Button Description

/ ( / )

/ ( / )

(OK )

(

SETTINGS

(

INPUT

( )

)

)

Scrolls through the saved channels.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

Accesses the main menus, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

(For 84LA9800)

Screen

ASSEMBLING AND PREPARING

OK

SETTINGS

INPUT

15

Speakers

Logo light

Button Description

/ ( / )

/ ( / )

(OK )

(

SETTINGS

(

INPUT

( )

)

)

Scrolls through the saved channels.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

Accesses the main menus, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

Remote control sensor

Buttons

ENGLISH

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

16

Lifting and Moving the TV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.

CAUTION

Avoid touching the screen at all times, as

y

this may result in damage to the screen.
Do not place the product on the floor with

y

its front facing down. Doing so may result
in damage to the screen.

It is recommended to move the TV in the

y

box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect

y

the power cord and all cables.
When holding the TV, the screen should

y

face away from you to avoid damage.

When transporting a large TV, there should

y

be at least 2 people.
When transporting the TV by hand, hold the

y

TV as shown in the following illustration.

When transporting the TV, do not expose

y

the TV to jolts or excessive vibration.
When transporting the TV, keep the TV

y

upright, never turn the TV on its side or tilt
towards the left or right.

Hold the top and bottom of the TV frame

y

ENGLISH

firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING

Setting up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface

y

to protect the screen from scratches.
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt

y

forward after being installed.)
Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.

y

NOTE

Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

y

(For LA9650 Series)

17

1

Stand Base

Stand Base

2

2

1

1

Attach the stand to the TV using the upper
mounting hole on the back of the TV.

2

Attach the stand to the TV using the lower
connection on the back of the TV.

NOTE

Be sure to attach the upper mounting hole first,

y

and then attach the lower connection second.

3

ENGLISH

M4 x 14

2 EA

M4 x 14

2 EA

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

18

(For LA9700 Series)

1

2

ENGLISH

Front

Stand Base

3

M4 x 14

2 EA

NOTE

The stand screws are already attached

y

at the back of the TV. Please use these
attached screw to assemble the TV and
stand. (For 65LA9700)

M4 x 14

2 EA

(For 84LA9800)

ASSEMBLING AND PREPARING

19

Front

Stand Body

Stand Base

41

M4 x 20

4 EA

2

M5 x 16

6 EA

Front

ENGLISH

3