LG 60PK950 Manual book
ENGLISH
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
Separate purchase
Wall Mounting Bracket
AW-50PG60MS
(50PK5**, 50PK7
AW-50PG60M
or
, 50PK9
***
***
AW-60PG60MS
)
(60PK7
AW-60PG60M
or
, 60PK9
***
***
)
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG Plasma TV.
Wireless LAN for
Broadband/
Wireless Media Box
AV1
AV2 COM1 COM2 HDMI 1 HDMI 2 HDMI 3 HDMI 4RGB WIRELESS
WIRELESS
OUT
CONTROL
DLNA Adaptor
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS
PREPARATION
Accessories .....................................................A-1
Front Panel Controls .......................................A-2
Back Panel Information ...................................A-4
Stand Installation .............................................A-6
Back Cover for Wire Arrangement ..................A-7
How to remove the Cable Management Clip ..A-7
Not using the Desk-type Stand ......................A-8
Swivel Stand ...................................................A-8
Careful Installation Advice ..............................A-8
Desktop Pedestal Installation ..........................A-9
Wall Mount: Horizontal Installation ..................A-9
Remote Control Key Functions .....................A-10
EXTERNAL EQUIPMENT SETUP
Antenna Connection ............................................1
Connecting with a Component Cable .................2
Connecting with an HDMI Cable.........................3
Connecting with an HDMI to DVI Cable .............4
USB Setup ..........................................................4
Connecting with an RF Cable .............................5
Connecting with an RCA Cable ..........................5
Connecting with a D-sub 15 pin Cable ...............6
Digital audio out Setup ........................................6
External Equipment Wireless Connection ..........7
Supported Display Resolution .............................8
Screen Setup for PC mode .................................9
Network Setup ...................................................13
Signal Test (Only DTV Country) ........................37
Product/Service Information ..............................38
Network Test ......................................................39
Simple Manual ..................................................40
Selecting the Programme List ...........................41
Input List ............................................................43
Input Label ........................................................44
Data Service ......................................................44
SIMPLINK ..........................................................45
AV Mode ............................................................48
Initializing(Reset to original factory settings) ....49
NETCAST
Legal Notice ......................................................50
Netcast Menu ....................................................52
Movie Online .....................................................54
Weather info ......................................................56
Photo Album ......................................................58
TO USE A USB OR PC DEVICE
When connecting a USB device .......................60
DLNA .................................................................62
Movie List ..........................................................66
Photo List ..........................................................76
Music List ..........................................................84
DivX Registration Code .....................................90
Deactivation .......................................................91
GAME
CONTENTS
WATCHING TV / PROGRAMME CONTROL
Turning on the TV .............................................23
Initializing Setup ...............................................23
Programme Selection ........................................23
Volume Adjustment ...........................................23
Quick Menu .......................................................24
On Screen Menus Selection and Adjustment ...25
Auto Programme Tuning ..................................27
Manual Programme Tuning ...............................28
Programme Edit ...............................................31
Software Update ...............................................34
Picture/Sound Test ............................................36
Game .................................................................92
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch On/Off EPG ...........................................94
Select a Programme .........................................94
Button Function in NOW/NEXT Guide Mode ...94
Button Function in 8 Day Guide Mode .............95
Button Function in Date Change Mode ............95
Button Function in Extended Description Box ..96
Button Function in Remind Setting Mode .........96
Button Function in Schedule List Mode ............97
I
CONTENTS
CONTENTS
MHEG (MULTIMEDIA AND
HYPERMEDIA INFORMATION CODING
EXPERT GROUP)(IN DIGITAL MODE)
Teletext within Digital Service ...........................98
Teletext in Digital Service ..................................98
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................99
Picture Wizard .................................................101
Energy Saving .................................................102
Preset Picture Settings ...................................103
Manual Picture Adjustment .............................105
Picture Improvement Technology ....................106
Expert Picture Control .....................................107
Picture Reset ...................................................110
Image Sticking Minimization (ISM) Method .... 111
Mode Setting ...................................................112
Demo Mode .....................................................113
SOUND & LANGUAGE CONTROL
Auto Volume Leveler .......................................114
Clear Voice II ...................................................115
Preset Sound Settings-Sound Mode ..............116
Sound Setting Adjustment -User Mode ..........117
Infinite Sound ..................................................117
Balance ...........................................................118
TV Speakers On/ Off Setup ............................119
DTV Audio Setting (In digital mode only) ........120
Selecting Digital Audio out ..............................121
Audio Reset .....................................................122
I/II
- Stereo/Dual Reception (In analogue mode only) ....123
- NICAM Reception (In analogue mode only) ............124
- Speaker Sound Output Selection ................125
Language Selection (In digital mode only) .....126
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................132
Block Programme ............................................133
Parental Control (In digital mode only) ...........134
External Input Blocking ...................................135
Key Lock..........................................................136
TELETEXT
Switch On/Off .................................................137
SIMPLE Text....................................................137
TOP Text..........................................................138
FASTEXT ........................................................138
Special Teletext Functions ..............................139
APPENDIX
Troubleshooting ...............................................140
Maintenance ....................................................142
Product Specifications ...................................143
IR Codes .........................................................145
External Control Device Setup ........................146
Open source software notice ..........................153
II
TIME SETTING
Clock Setup .....................................................129
Auto On/Off Time Setting ................................130
Sleep Timer Setting .........................................131
PREPARATION
PLASMA TV Models : 50PK5
, 50/60PK7
***
, 50/60PK9
***
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
LIGHT
AV MODE
INPUTENERGY
SAVING
1
.,;@2 abc3 def
4
ghi5 jkl6
mno
7
pqrs8 tuv
9
wxyz
LIST
Q.VIEW
[
0
MARK
FAV
CHAR/NUM
P
RATIO
DELETE
MUTE
MENU
Q.MENU
OK
GUIDE
EXIT
BACK
FREEZE
INFO
AD APP/
Owner’s Manual
x 2
Nero MediaHome
4 Essentials CD
Power Cord
Remote Control
Batteries (AAA)
***
TV/
RAD
P
A
G
E
*
PREPARATION
Cable Holder
x 4
M4x28
M5x14
(Only 50PK5**)
Ferrite Core
(
This item is not
included for all
models.
)
Cable
Management Clip
(Only 50/60PK9***)
x 3
x 4
M4x28
(Only 50PK7
Bolts for stand assembly
Ferrite core can be used to
reduce the electromagnetic
wave when connecting the
power plug.
The closer the location of the
ferrite core to the power plug,
the better it is.
Install the power
plug closely.
M4x14
, 50PK9
***
This item is not included for all models.
x 4
)
***
Polishing cloth for
use on the screen.
Ferrite Core
(
This item is not
included for all
models.
Protection
Cover
Polishing Cloth
Ferrite core can be used to
reduce the electromagnetic wave
when connecting the LAN cable.
Place the ferrite core far from
TV and wind the LAN cable in
the ferrite core once.
)
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polishing cloth.
Do not use excessive
force. This may cause
scratching or discolouration.
A-1
PREPARATION
FRONT PANEL CONTROLS
NOTE
PREPARATION
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
■ Image shown may differ from your TV.
Only 50PK5
Touch Button
You can use the desired button function by touching.
**
SPEAKER
Remote Control Sensor
Intelligent Sensor
Adjusts picture accord-
ing
to the surrounding
conditions
Power/Standby Indicator
• Illuminates red in standby mode.
• The lighting is off while the TV remains on.
A-2
POWER
INPUT MENU
OK VOLUME
PROGRAMME
Only 50/60PK7
SPEAKER
Touch Button
You can use the desired button function by touching.
, 50/60PK9
***
***
Intelligent Sensor
Adjusts picture according
surrounding conditions
Remote Control
Sensor
Power/Standby Indicator
• Illuminates red in standby mode.
• The lighting is off while the TV remains on.
PREPARATION
to the
POWER
INPUT MENU
OK VOLUME
PROGRAMME
A-3
PREPARATION
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
OPTICA L
DIGITAL
AUDIO OUT
1
2
COMPONENT IN
AUDIO
VIDEO
/DVI IN
1
2
AUDIO IN
(RGB/DVI)
R
L(MONO)
AUDIO
VIDEO
AV IN 1
ANTENNA
IN
HDMI / DVI IN 3
BACK PANEL INFORMATION
PREPARATION
Only 50PK5
**
■ Image shown may differ from your TV.
1
7
42
3
5
6
10
7
HDMI / DVI IN 3
6
8
9
A-4
1
Power Cord Socket
This TV operates on an AC power.
Caution: Never attempt to operate the TV on
DC power.
RGB/DVI Audio Input
2
Connect the audio from a PC or DTV.
3
RGB IN Input
Connect the output from a PC.
4
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
5
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
6
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
7
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
8
Component Input
Connect a component video/audio device to
these jacks.
9
Antenna Input
Connect antenna or cable to this jack.
10
USB Input
Connect USB storage device to this jack.
Only 50/60PK7
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
WIRELESS
CONTROL
OPTICA L
DIGITAL
AUDIO OUT
1
2
COMPONENT IN
AUDIO
VIDEO
LAN
/DVI IN
1
2
3
AUDIO IN
(RGB/DVI)
R
L(MONO)
AUDIO
VIDEO
AV IN 1
ANTENNA
IN
HDMI / DVI IN 4
, 50/60PK9
***
***
■ Image shown may differ from your TV.
1
8
9
PREPARATION
532
4
6
7
10
11
12
9
HDMI / DVI IN 4
7
1
Power Cord Socket
This TV operates on an AC power.
Caution: Never attempt to operate the TV on
DC power.
2
WIRELESS Control
Connect the Wireless Ready Dongle to the
TV to control the external input devices con-
nected to Wireless Media Box wirelessly.
3
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4
RGB IN Input
Connect the output from a PC.
5
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
6
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
7
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
8
LAN
Network connection for Weather info, Movie
Online, Photo Album, etc.
Also used for video, photo and music files on
a local network.
9
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
10
Component Input
Connect a component video/audio device to
these jacks.
11
Antenna Input
Connect antenna or cable to this jack.
12
USB Input
Connect USB storage device to this jack.
A-5
PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
PREPARATION
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
(Only 50PK5***, 50PK7***)
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
(Only 50PK9***)
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Set the Stand Base on even floor.
2
Assemble the parts of the Stand Body
with the Stand Base of the TV.
Stand Body
M5x14
Stand Base
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in
4
the back of the TV.
Set the Stand Base on even floor.
2
Assemble the parts of the Stand Body
with the Stand Base of the TV.
Stand Body
M4x14
Stand Base
Assemble the parts of the Cable
3
Management Clip with the Stand Body.
Cable
Management
Clip
Assemble the TV as shown.
4
Stand Body
A-6
M4x28
Front
When assembling the stand,
make sure to distinguish and
assemble the front and rear
side of the stand correctly.
Fix the 4 bolts securely using the holes in
5
the back of the TV.
M4x28
BACK COVER FOR
WIRE ARRANGEMENT
■ Image shown may differ from your TV.
After connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
In case of the LAN cable, install as shown
to reduce the electromagnetic wave.
(50PK5***)
NOTE
►Do not use the Cable Management Clip to
lift the TV.
- If the TV is dropped, you may be injured or
the TV may be damaged.
HOW TO REMOVE THE
CABLE MANAGEMENT
CLIP
PREPARATION
(50PK7***, 50PK9***)
Connect the cables as necessary. To con-
1
nect additional equipment, see the
External Equipment Setup section.
Cable Holder
Cable Holder
■ Image shown may differ from your TV.
Hold the Cable Management Clip with both
hands and pull it backward as shown.
Install the Cable Management Clip into
2
the TV until clicking sound.
A-7
PREPARATION
PREPARATION
NOT USING THE DESKTYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the Protection
Cover into the TV until
clicking sound.
Protection Cover
(Fix a Guide to the Outsides.)
SWIVEL STAND
■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
CAREFUL INSTALLATION
ADVICE
■ You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■ The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
1
2
Use the eye-bolts or TV brackets/bolts to fix the
1
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
1
2
Secure the wall brackets with the bolts on the
2
wall. Match the height of the bracket that is
mounted on the wall.
3
Use a sturdy rope to tie the product for align-
3
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
NOTE
► When moving the TV undo the cords first.
► Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
► To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
A-8
■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■ The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTAL
NOTE
►Should Install wall mount on a solid wall perpendicular to the floor.
►Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
►The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.
►Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
►LG is not liable for any accidents or damage
to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
PREPARATION
INSTALLATION
■ Image shown may differ from your TV.
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
10 cm
WALL MOUNT: HORIZONTAL
INSTALLATION
■ We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
■ We recommend that you purchase a wall mounting bracket which supports VESA standard.
■ LG recommends that wall mounting be performed by a qualified professional installer.
10 cm
Model
50PK5
50PK7
60PK7
50PK9
60PK9
***
***
***
***
***
10 cm
10 cm
10 cm
VESA
(A * B)
400 * 400
400 * 400
600 * 400
400 * 400
600 * 400
Standard
Screw
M6
M6
M8
M6
M8
10 cm
Quantity
4
4
4
4
4
A-9
PREPARATION
AV MODE
LIGHT
INPUTENERGY
SAVING
1 2 ABC 3 DEF
4 GHI 5 JKL 6
MNO
7
PQRS
8 TUV
0
[
9
XYZ
BACK
EXIT
OK
LIST
Q.VIEW
MENU
Q.MENU
GUIDE
FREEZE
INFO
P
A
G
E
FAV
RATIO
MUTE
MARK
DELETE
CHAR/NUM
P
TV/
RAD
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
In Analogue TV and some countries, some remote control keys may not work.
PREPARATION
(POWER)
AV MODE INPUTENERGY
LIGHT
Switches the TV on from standby or off to standby.
You can turn the light of the remote control button
(Only
on or off.
50PK9***)
ENERGY
Adjust the Energy Saving mode of the TV.(► p.100)
SAVING
AV MODE
It helps you select and set images and sounds
when connecting AV devices.(► p.48)
INPUT
TV/RAD
MENU
External input mode rotate in regular sequence.
(
►
p.43)
Selects Radio, TV and DTV channel.
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.(►
NetCast
(Except for
50PK5***)
Q. MENU
Select the desired NetCast menu source. (►
(Weather info, Movie Online, Photo Album)
NetCast menu source can differ by country.
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio Language
Device).(►
, Sleep Timer, Skip Off/On, USB
p.24)
p.25)
p.52)
A-10
THUMBSTICK
(Up/Down/Left/Right)
OK
BACK
EXIT
GUIDE
INFO i
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
Allows the user to move return one step in an interactive application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows programme guide.(►
p.91)
Shows the present screen information.
AV MODE
LIGHT
INPUTENERGY
SAVING
1 2 ABC 3 DEF
4 GHI 5 JKL 6
MNO
7
PQRS
8 TUV
0
[
9
XYZ
BACK
EXIT
OK
LIST
Q.VIEW
MENU
Q.MENU
GUIDE
FREEZE
INFO
P
A
G
E
FAV
RATIO
MUTE
MARK
DELETE
CHAR/NUM
P
TV/
RAD
AV MODE INPUTENERGY
PREPARATION
0 to 9 number
button
]
(Space)
Q.VIEW
Coloured
buttons
1
TELETEXT
BUTTONS
Selects a programme.
Selects numbered items in a menu.
Opens an empty space on the screen keyboard.
LIST
Displays the programme table. (►
p.41)
Returns to the previously viewed programme.
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(►
p.134)
SUBTITLE
Recalls your preferred subtitle in digital mode.
1
FREEZE
Pause the present picture at the screen. (It doesn't
work at USB Mode and Simplink.)
The TV returns to normal viewing automatically if
no signal is received or no operation is performed
for 5 minutes.
If you keep the screen in Freeze condition, the
residual image can exist.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(► p.45)
A-11
PREPARATION
AV MODE
LIGHT
INPUTENERGY
SAVING
1 2 ABC 3 DEF
4 GHI 5 JKL 6
MNO
7
PQRS
8 TUV
0
[
9
XYZ
BACK
EXIT
OK
LIST
Q.VIEW
MENU
Q.MENU
GUIDE
FREEZE
INFO
P
A
G
E
FAV
RATIO
MUTE
MARK
DELETE
CHAR/NUM
P
TV/
RAD
PREPARATION
AV MODE INPUTENERGY
/DOWN
MARK
VOLUME UP
Adjusts the volume.
Select the input to apply the Picture Wizard
settings. Mark and un-mark programmes in the
USB menu.
FAV
Displays the selected favourite programme.
CHAR/NUM
RATIO
Shifts the Character or Number for NetCast menu.
Selects your desired Aspect Ratio of picture.
(► p.97)
DELETE
Deletes the entered character when entering the
character on the screen keyboard.
MUTE
Programme
Switches the sound on or off.
Selects a programme.
UP/DOWN
PAGE UP/
DOWN
SIMPLINK /
MY MEDIA
Move from one full set of screen information to the
next one.
Controls SIMPLINK or MY MEDIA menu (Photo List,
Music List and Movie List).
Menu
control buttons
A-12
Installing Batteries
■ Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
■ Install two 1.5 V AAA batteries. Do not mix old or used batteries with new ones.
■ Close cover.
■ To remove the batteries, perform the installation actions in
reverse.
EXTERNAL EQUIPMENT SETUP
■ To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
ANTENNA CONNECTION
■ For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Antenna
■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
■ If signal needs to be split for two TVs, use an antenna signal splitter for connection.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 Ω)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Signal
Amplifier
VHF
1
EXTERNAL EQUIPMENT SETUP
■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 50/60 PK950.
■ Image shown may differ from your TV.
CONNECTING WITH A COMPONENT CABLE
EXTERNAL EQUIPMENT SETUP
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as
shown below.
Connect the video outputs (Y, PB, PR) of the
1
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
Connect the audio output of the external equip-
2
ment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
Turn on the external equipment.
3
(
Refer to the external equipment's manual for
operating instructions.)
Select the COMPONENT1 input source using
4
the INPUT button on the remote control.
If connected to COMPONENT IN 2, select
COMPONENT2 input source.
1
2
► HDMI Audio Supported format : Dolby Digital, PCM.
DTS Audio format is not supported.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p
O
(50 Hz / 60 Hz only)
O
(24 Hz / 30 Hz /
50 Hz / 60 Hz)
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV Y PB PR
Y PB PR
Video output ports
on DVD player
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
2
CONNECTING WITH AN HDMI CABLE
RG
(PC)
( )
RS-232C IN
(
CONTROL & SERVICE
)
W
SS
CO
O
PTICAL
DIGITA
L
A
UDIO OUT
1
O
N
AUDIO
V
IDE
O
N
A
UDIO I
N
(RGB/DVI)
R
AUDIO
VIDEO
A
V IN
1
ANTENNA
Connect the HDMI output of the external equipment (digital set-
1
top box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/
DVI IN 3, HDMI/DVI IN 4(Except for PK5**) jack on the TV.
Turn on the external equipment.
2
(Refer to the external equipment's manual for operating
instructions.)
Select HDMI1, HDMI2, HDMI3, HDMI4(Except for PK5**) input
3
source using the INPUT button on the remote control.
NOTE
► The TV can receive video and audio signals simultaneously when
using an HDMI cable.
► If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
► Check that your HDMI cable is High Speed HDMI Cable. If the HDMI
cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
IRELE
NTROL
LA
B IN
3
2
1
/DVI IN
1
NENT I
MP
EXTERNAL EQUIPMENT SETUP
3
EXTERNAL EQUIPMENT SETUP
B IN
RS-232C IN
CONTROL & SERVICE
)
SS
NTROL
O
PTICAL
DIGITA
L
A
UDIO OUT
MP
O
NENT I
N
AUDIO
V
IDE
O
LA
N
/DVI IN
1
2
3
A
UDIO I
N
AUDIO
VIDEO
A
V IN
1
ANTENNA
IN
)
SS
O
L
AUDIO OU
AUDIO
VIDEO
A
1
N
■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 50/60 PK950.
■ Image shown may differ from your TV.
CONNECTING WITH AN HDMI TO DVI CABLE
EXTERNAL EQUIPMENT SETUP
B IN
PTICAL
DIGITA
T
RS-232C IN
CONTROL & SERVICE
V IN
I
Connect the digital set-top box or the DVI out-
1
put of the PC to HDMI/DVI IN 1, HDMI/DVI IN
2, HDMI/DVI IN 3, HDMI/DVI IN 4(Except for
PK5**) jack on the TV.
2
3
Connect the audio output of the digital set-top
box or the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
Turn on the digital set-top box or the PC and
the TV.
(
Refer to the digital set-top box or the PC
IRELE
NTROL
L
3
2
1
/DVI IN
1 2
AUDIO IN
(RGB/DVI)
manual for operating instructions.)
Select HDMI1, HDMI2, HDMI3, HDMI4(Except
4
for PK5**) input source using the INPUT button on the remote control.
or
USB SETUP
Connect the USB device to the USB IN 1 or
1
USB IN 2(Except for PK5**) jack on the TV.
After connecting the USB IN 1 or USB IN 2
2
jack, you use the USB function. (► p.60)
HDMI / DVI IN 4
4
1
or
CONNECTING WITH AN RF CABLE
)
A
1
/
4
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connect the ANT OUT socket of the VCR to
1
V IN
the ANTENNA IN socket on the TV.
ANTENNA
Connect the antenna cable to the ANT IN
2
socket of the VCR.
Press the PLAY button on the VCR and match
3
the appropriate channel between the TV and
IN
1
2
VCR for viewing.
CONNECTING WITH AN RCA CABLE
EXTERNAL EQUIPMENT SETUP
Wall Jack
Antenna
Connect the AUDIO/VIDEO jacks between TV
1
and VCR or external equipment. Match the
jack colours. (Video = yellow, Audio Left =
white, and Audio Right = red)
Insert a video tape into the VCR and press
2
PLAY on the VCR.
(
Refer to the VCR owner’s
manual.)
Or, Operate the corresponding external equip-
ment. (Refer to external equipment operating
guide.)
Select AV1, AV2 input source using the INPUT
3
button on the remote control.
NOTE
► If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO jack of the TV.
DVI IN
DMI
1
or
Video Game Set
Camcorder
5
EXTERNAL EQUIPMENT SETUP
)
AUDIO
V
O
/DVI IN
A
N
AUDIO
VIDEO
A
1
ANTENNA
A
)
SS
CO
OL
O
L
AUDIO OUT
A
O
V
O
/DVI IN
AUDIO
VIDEO
AV IN 1
IN
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connect the RGB output of the PC to the RGB
EXTERNAL EQUIPMENT SETUP
1
IN (PC) jack on the TV.
Connect the PC audio output to the AUDIO IN
2
(RGB/DVI) jack on the TV.
WIRELE
NTR
AUDIO IN
(RGB/DVI)
RGB IN
(PC)
PTICA
IGITAL
CONTROL & SERVICE
-232C IN
Turn on the PC and the TV
3
Select RGB input source using the INPUT but-
4
ton on the remote control.
IDE
2
1
UDI
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL
DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
B IN
OPTICA L
DIGITAL
AUDIO OUT
RS-232C IN
CONTROL & SERVICE
V IN
Connect one end of an optical cable to the TV
1
Digital Audio (Optical) Output port.
Connect the other end of the optical cable to
2
the digital audio (Optical) input on the audio
UDIO I
equipment.
Set the “TV Speaker option - Off ” in the
3
AUDIO menu.(►p.119). Refer to the external
IDE
1
audio equipment instruction manual for operation.
2
CAUTION
► Do not look into the optical output port. Looking at the laser
6
beam may damage your vision.
EXTERNAL EQUIPMENT WIRELESS CONNECTION
RS-232C I
N
NTROL & SERVICE
)
O
PTICA
L
DIGITA
L
AUDIO OUT
2
AUDIO
VIDEO
AN
AUDIO IN
AUDIO
VIDEO
AV IN
1
ANTENNA
A
(Except for 50PK5**)
LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold
separately. When you connect the Wireless Ready Dongle (included with the Wireless Media Box) to the
TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to
the TV wirelessly.
After the wireless is connected, press the INPUT button to view the wireless input screen.
Refer to the Wireless Media Box manual for operating instructions.
Connect the WIRELESS CONTROL jack of the
1
Wireless Ready Dongle to the WIRELESS
CONTROL jack on the TV.
Connect HDMI OUT jack of the Wireless
2
Ready Dongle to the HDMI/DVI IN 1, HDMI/
DVI IN 2, HDMI/DVI IN 3, HDMI/DVI IN 4 jack
on the TV.
EXTERNAL EQUIPMENT SETUP
LG Wireless Ready Dongle
AV1
AV2 COM1 COM2 HDMI 1 HDMI 2 HDMI 3 HDMI 4RGB WIRELESS
WIRELESS
CONTROL
OUT
LG Wireless Media Box
WIRELESS
CONTROL
3
2
L
1
/DVI IN
NOTE
►WIRELESS CONTROL : Wireless Ready Dongle power supply and control usage.
►HDMI : Video/Audio signal is connected in Wireless Ready Dongle.
►When you connect to the Wireless Media Box (Separately sold product), you can watch the external
device connected to the Wireless Media Box through wireless connection.
►When using the external device connected to the Wireless Media Box, some functions of the TV.
►In wireless external output, Real Cinema and Digital Noise Reduction functions are not supported.
RGB IN
7
EXTERNAL EQUIPMENT SETUP
SUPPORTED DISPLAY RESOLUTION
EXTERNAL EQUIPMENT SETUP
RGB-PC, HDMI/DVI-PC mode
Resolution
720x400 31.469 70.08
640x480 31.469 59.94
800x600 35.156 56.25
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.693 59.992
1360x768 47.712 60.015
1280x1024 63.981 60.020
1920x1080 66.587 59.934
Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
HDMI/DVI-DTV mode
Resolution
720x480
720x576 31.25 50
1280x720
1920x1080
Horizontal
Frequency
(kHz)
31.47
31.47
37.5
44.96
45
33.72
33.75
28.125
26.97
27
33.71
33.75
56.25
67.432
67.5
Vertical
Frequency (Hz)
59.94
60
50
59.94
60
59.94
60
50
23.94
24
29.97
30.00
50
59.939
60
NOTE
► Avoid keeping a fixed image on the set’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use a
screen saver when possible.
► There may be interference relating to resolution, ver-
tical pattern, contrast or brightness in PC mode.
Change the PC mode to another resolution or
change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic
card can not be changed, change the PC graphic
card or consult the manufacturer of the PC graphic
card.
► The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
► We recommend using 1920x1080, 60 Hz for the PC
mode, this should provide the best picture quality.
► Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or the
signal cable from the HDMI output port of the PC to
the HDMI IN (or HDMI/DVI IN) port on the TV.
► Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included with
the TV).
► If using a sound card, adjust PC sound as required.
► If the graphic card on the PC does not output ana-
logue and digital RGB simultaneously, connect only
one of either RGB or HDMI IN (or HDMI/DVI IN) to
display the PC output on the TV.
► If the graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)
► DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
► If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
8
SCREEN SETUP FOR PC MODE
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
PICTURE
• Brightness 50
• Sharpness 65
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• Screen
• Screen
Move
OK
R G
W
C
►
SCREEN
Resolution
Auto Config.
Position
Size
Phase
Reset
Move
To Set
Yes No
EXTERNAL EQUIPMENT SETUP
Prev.
1
2
3
4
Select PICTURE.
Select Screen.
Select Reset.
Select Yes.
5
Run Reset.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
9
EXTERNAL EQUIPMENT SETUP
Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the
EXTERNAL EQUIPMENT SETUP
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
PICTURE
• Brightness 50
• Sharpness 65
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• Screen
• Screen
Move
OK
R G
W
C
►
SCREEN
Resolution
Auto Config.
Position
Size
Phase
Reset
Move
Auto Config.
Yes No
Prev.
1
2
3
4
5
Select PICTURE.
Select Screen.
Select Auto Config.
Select Yes.
Run Auto Config.
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
10
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
PICTURE
• Brightness 50
• Sharpness 65
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• Screen
• Screen
Move
OK
R G
W
SCREEN
Resolution
Auto Config.
C
►
Position
Size
Phase
Reset
Move
1024 x 768
1280 x 768
1360 x 768
EXTERNAL EQUIPMENT SETUP
Prev.
1
2
3
4
Select PICTURE.
Select Screen.
Select Resolution.
Select the desired resolution.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
11
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust
EXTERNAL EQUIPMENT SETUP
the picture position manually.
This function works in the following mode : RGB[PC].
1
2
3
4
PICTURE
• Brightness 50
• Sharpness 65
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• Screen
• Screen
Move
OK
R G
W
C
►
Select PICTURE.
Select Screen.
Select Position, Size or Phase.
Make appropriate adjustments.
SCREEN
Resolution
Auto Config.
Position
Size
Phase
Reset
Move
Prev.
12
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NETWORK SETUP
)
W
SS
O
L
A
AUDIO
V
O
/DVI IN
A
N
AUDIO
VIDEO
A
1
ANTENNA
A
IN
(Except for 50PK5**)
Wired Network Connection
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical
connection, the TV needs to be set up for network communication.
EXTERNAL EQUIPMENT SETUP
IRELE
NTROL
LAN
Broadband Modem
Broadband Service
B IN
IDE
DIGITA
UDIO OUT
PTICAL
CONTROL & SERVICE
RS-232C IN
V IN
UDIO I
1
Router
Broadband Modem
Broadband Service
Connect the LAN port of the Modem or Router to the LAN
1
port on the TV.
Select “Network Setting” in the NETWORK menu.
2
After connecting the LAN port, use the NetCast menu.
3
For more information about NetCast setup and troubleshooting, visit http://lgknowledgebase.com. Search for
NetCast.
CAUTION
►Do not connect a modular phone cable to the LAN port.
►Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service provider.
13
EXTERNAL EQUIPMENT SETUP
TV
Wired Network Setup
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
EXTERNAL EQUIPMENT SETUP
NETWORK
• Network Setting : Wired
• Network Setting : Wired
• Network Status : Internet is connected
• Legal Notice
Move
OK
Network Type
Wired network is recommended
►
Wired
Wireless
Appeared when
wired and wireless
are simultaneously
connected.
If you already set
the Network Setting
Previous setting value exists. Do
you want to connect with the
previous setting?
OK
Resetting
ꔉ Next
Exit
1
2
3
4
Network Setting
Network connecting
Setting Test Close
Select NETWORK.
Select Network Setting.
Select Wired.
If you already set Network Setting: Select Resetting. The new connection settings
resets the current network settings.
IP Auto Setting
Network Setting
Select the IP setting mode.
IP Mode
● IP Address 0 . 0 . 0 . 0
● Subnet Mask
● Gateway 0 . 0 . 0 . 0
● DNS Server 0 . 0 . 0 . 0
Previous
◄ IP Auto Setting ►
255 . 255 . 0 . 0
OK
Exit
IP Manual Setting
Network Setting
Insert the IP address.
IP Mode
● IP Address 0 . 0 . 0 . 0
● Subnet Mask
● Gateway 0 . 0 . 0 . 0
● DNS Server 0 . 0 . 0 . 0
◄ IP Manual Setting ►
255 . 255 . 0 . 0
OK
Previous
Exit
14
5
Select IP Auto Setting or IP Manual Setting.
When Selecting IP Manual Setting:
IP addresses will need to be input manually.
6
Select OK.
Loading...