OWNER’S MANUAL
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
60LN6150
P/NO : MFL67690914 (1303-REV00) |
www.lg.com |
<![endif]>ENGLISH
2 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
|
Read these instructions. |
|
|
Keep these instructions. |
|
WARNING/CAUTION |
||
Heed all warnings. |
||
|
Follow all instructions. |
|
RISK OF ELECTRIC SHOCK |
||
|
||
DO NOT OPEN |
|
|
|
|
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
The note helps you understand and use the product safely. Please read the note carefully before using the product.
yyDo not use this apparatus near water.
yyClean only with a dry cloth.
yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
yyDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS |
3 |
yyProtect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
yyOnly use attachments/accessories specified by the manufacturer.
yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
yyUnplug this apparatus during lightning storms or when unused for long periods of time.
yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
yyDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.
yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed
by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yyCAUTION concerning the Power Cord (Can differ by country):
It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do
not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
<![endif]>ENGLISH
<![endif]>ENGLISH
4 IMPORTANT SAFETY INSTRUCTIONS
yyGrounding
(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply
Short-circuit
Breaker
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
yyDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
yyOutdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
Antenna Lead in Wire |
||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
Antenna Discharge Unit |
|||||||||
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electric Service |
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-20) |
|
Equipment |
|
|
|
|
|
|
|
|
Grounding Conductor |
||||
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-21) |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Power Service Grounding |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NEC: National Electrical Code |
Electrode System |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Art 250, Part H) |
yyCleaning
When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.
yyMoving
Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
yyVentilation
Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.
yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.
yyKeep the product away from direct sunlight. yyNever touch this apparatus or antenna during a
thunder or lightning storm.
yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
yyDisconnecting the Main Power
The power outlet used with this device must remain easily accessible.
yyStore the accessories (battery, etc.) in a safe location out of the reach of children.
yyThis apparatus use batteries. In your community there might be regulations that require you
to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
yyDo not dispose of batteries in a fire.
yyDo not short circuit, disassemble or allow the batteries to overheat.
|
|
IMPORTANT SAFETY INSTRUCTIONS |
5 |
||
yyDot Defect |
For USA and Canada |
|
|
||
The Plasma or LCD panel is a high technology |
|
||||
|
|
|
|
|
|
product with resolution of two million to six million |
|
|
|
|
|
pixels. In a very few cases, you could see fine dots |
|
|
|
|
|
|
FCC NOTICE |
|
|
|
|
on the screen while you’re viewing the TV. Those |
|
|
|
||
|
|
|
|
|
|
dots are deactivated pixels and do not affect the |
This equipment has been tested and found to |
|
|||
performance and reliability of the TV. |
|
||||
comply with the limits for a Class B digital device, |
|
||||
yyGenerated Sound |
|
||||
pursuant to Part 15 of the FCC Rules. These limits |
|
||||
“Cracking” noise: A cracking noise that occurs |
|
||||
are designed to provide reasonable protection |
|
||||
when watching or turning off the TV is generated by |
|
||||
against harmful interference in a residential |
|
||||
plastic thermal contraction due to temperature and |
|
||||
installation. This equipment generates, uses and can |
|
||||
humidity. This noise is common for products where |
|
||||
radiate radio frequency energy and, if not installed |
|
||||
thermal deformation is required. |
|
||||
and used in accordance with the instructions, may |
|
||||
Electrical circuit humming/panel buzzing: A low level |
|
||||
cause harmful interference to radio communications. |
|
||||
noise is generated from a high-speed switching |
|
||||
However, there is no guarantee that interference |
|
||||
circuit, which supplies a large amount of current |
|
||||
will not occur in a particular installation. If this |
|
||||
to operate a product. It varies depending on the |
|
||||
equipment does cause harmful interference to radio |
|
||||
product. |
|
||||
or television reception, which can be determined |
|
||||
This generated sound does not affect the |
|
||||
by turning the equipment off and on, the user is |
|
||||
performance and reliability of the product. |
|
||||
encouraged to try to correct the interference by one |
|
||||
yyTake care not to touch the ventilation openings. |
|
||||
or more of the following measures: |
|
||||
When watching the TV for a long period, the |
|
||||
|
- Reorient or relocate the receiving antenna. |
|
|||
ventilation openings may become hot. This does |
|
|
|||
not affect the performance of the product or cause |
|
- Increase the separation between the |
|
||
defects in the product. |
|
equipment and the receiver. |
|
||
yyIf the TV feels cold to the touch, there may be a |
|
- Connect the equipment to an outlet on a circuit |
|
||
small “flicker” when it is turned on. This is normal, |
|
different from that to which the receiver is |
|
||
there is nothing wrong with TV. Some minute dot |
|
connected. |
|
||
defects may be visible on the screen, appearing as |
|
- Consult the dealer or an experienced radio/TV |
|
||
tiny red, green, or blue spots. However, they have |
|
technician for help. |
|
||
no adverse effect on the TV’s performance. Avoid |
This device complies with part 15 of the FCC Rules. |
|
|||
touching the LCD screen or holding your finger(s) |
Operation is subject to the following two conditions: |
|
|||
against it for long periods of time. Doing so may |
(1) this device may not cause harmful interference |
|
|||
produce some temporary distortion effects on the |
and (2) this device must accept any interference |
|
|||
screen. |
received, including interference that may cause |
|
|
|
|
|
|
|
|
undesired operation of the device. |
||
|
Preventing “Image burn” or “Burn-in” on your TV |
Any changes or modifications in construction of |
|||||||
|
this device which are not expressly approved by |
||||||||
|
screen |
|
|
|
|
|
|||
|
|
|
|
|
|
the party responsible for compliance could void the |
|||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
user’s authority to operate the equipment. |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
NOTE TO CABLE/TV INSTALLER |
|
|
|
|
|
|
|
|
|
|
|
yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.
yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit ‘http://opensource.lge.com’.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to ‘opensource@lge.com’. This offer is valid for three (3) years from the date on which you purchased the product.
TABLE OF CONTENTS |
7 |
TABLE OF CONTENTS
2 IMPORTANT SAFETY INSTRUCTIONS
6 LICENSES
6OPEN SOURCE SOFTWARE NOTICE
7TABLE OF CONTENTS
8INSTALLATION PROCEDURE
8 ASSEMBLING AND PREPARING
8 Unpacking
10Optional Extras
11Parts and Buttons
12Lifting and moving the TV
13Setting up the TV
13- Attaching the stand
14- Mounting on a table
15- Tidying cables
16- Mounting on a wall
17MAKING CONNECTIONS
17Connecting to an antenna or cable
18Connecting to a HD receiver, DVD Player, or VCR
18- HDMI Connection
19- DVI to HDMI Connection
20- Connecting to a mobile phone
21- Component Connection
22- Composite Connection
23Connecting to a PC
23- HDMI Connection or DVI to HDMI Connection
25Connecting to an Audio System
25- Digital Optical Audio Connection
26Connecting Headphones
26 Connecting a USB Drive
27 REMOTE CONTROL
29 WATCHING TV
29Turning the TV on for the first time
30USING THE USER GUIDE
31SPECIFICATIONS
32EXTERNAL CONTROL DEVICE SETUP
33MAINTENANCE
33 Cleaning Your TV
33 - Screen, frame, cabinet, and stand
33 - Power cord
33 TROUBLESHOOTING
NOTE
yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual.
yyThe available menus and options may differ from the input source or product model that you are using.
yyNew features may be added to this TV in the future.
<![endif]>ENGLISH
8 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
<![endif]>ENGLISH
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty. yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off.
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
yyUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
AA
*A 10 mm (0.39 inches) *B
18 mm (0.7 inches)
ASSEMBLING AND PREPARING 9
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote Control, Batteries (AAA) |
|
Owner’s Manual |
|
Power Cord |
||||||
(See p. 27) |
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stand Body, Stand Base |
|
Stand Screws |
|
Cable Holder |
(See p. 13) |
|
8 EA, M4 x 14 |
|
(See p. 15) |
|
|
(See p. 13) |
|
|
|
|
|
|
|
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed due to the manufacturer’s circumstances or policies.
<![endif]>ENGLISH
AN-MR400 |
|
AN-VC4** |
LG Audio Device |
|
Magic Remote |
|
Video Call Camera |
|
|
|
|
|
|
|
Tag On
Tag On |
AN-BL*** |
|
|
|
Wireless IR Blaster |
|
|
(Depending on model) |
|
|
|
ASSEMBLING AND PREPARING 11
Parts and Buttons
Screen
OK
SETTINGS
INPUT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Buttons |
||
Speakers |
||||||
|
|
|
|
|||
|
|
|
|
Power Indicator |
||
|
|
|
||||
|
|
|
|
Remote control Sensor and |
||
|
|
|
|
|||
|
|
|
|
Intelligent Sensor1 |
<![endif]>ENGLISH
|
Button |
Description |
|
|
|
|
|
/ |
(^ / v) |
|
Scrolls through the saved channels. |
|
|
|
|
/ |
(+ / -) |
|
Adjusts the volume level. |
|
|
|
|
(OK ) |
|
Selects the highlighted menu option or confirms an input. |
|
|
|
||
(SETTINGS) |
Accesses the main menus, or saves your input and exits the menus. |
||
|
|
|
|
(INPUT |
) |
Changes the input source. |
|
|
|
|
|
( / I) |
|
Turns the power on or off. |
|
|
|
|
|
1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
12 ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yyAvoid touching the screen at all times, as this may result in damage to the screen.
yyIt is recommended to move the TV in the box or packing material that the TV originally came in. yyBefore moving or lifting the TV, disconnect the
power cord and all cables.
yyWhen holding the TV, the screen should face away from you to avoid damage.
yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
<![if ! IE]><![endif]>ENGLISH
yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.
yyWhen transporting a large TV, there should be at least 2 people.
yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.
ASSEMBLING AND PREPARING 13
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
yyDo not tighten the screws with too much force; otherwise they may be damaged and come loose later.
NOTE
yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
1 |
3 |
|
4 EA |
|
M4 x 14 |
Stand Body |
|
|
Front |
4 EA
M4 x 14
Stand Base
2
<![endif]>ENGLISH
14 ASSEMBLING AND PREPARING
Mounting on a table
1Lift and tilt the TV into its upright position on a table.
-Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation.
NOTE
adjusting the angle of the TV, watch out for fingers.
»»Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.
10 cm
10 cm (4 inches)
10 |
cm |
|
|
10 cm |
Front |
Rear |
2 Connect the power cord to a wall outlet.
CAUTION
yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.
<![if ! IE]><![endif]>ENGLISH
Adjusting the angle of the TV to suit view
Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view.
Using the Kensington security system (optional)
(Depending on model)
The Kensington security system connector is located at the rear of the TV.
For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.
Connect the |
|
cable between |
the TV and |
|
|
|
|
|
NOTE
Kensington security system is optional. You obtain additional accessories from your local
dealer.
|
|
|
ASSEMBLING AND PREPARING 15 |
|
|
Tidying cables |
|
||
|
Securing the TV to a wall (optional) |
|
||
(Depending on model) |
1 Gather and bind the cables with the cable |
|||
|
|
|
||
|
|
|
management. |
1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Gather and bind the cables with the cable holder.
Cable Holder
Cable Management
CAUTION
yyDo not move the TV by holding the cable holder and cable management, as the cable holders may break, and injuries and damage to the TV may occur.
2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV.
3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable.
Make sure to keep the rope or cable parallel to the surface.
CAUTION
sure that children do not climb on or hang on TV.
NOTE
platform or cabinet that is strong and large enough to support the TV securely.
yyBrackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.
<![endif]>ENGLISH
16 ASSEMBLING AND PREPARING
Mounting on a wall
An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount.
|
|
10 cm (4 |
inches) |
|
10 cm |
|
|
|
|
|
10 cm |
|
|
10 cm |
|
<![if ! IE]> <![endif]>ENGLISH |
Make sure to use screws and wall mounts that meet the |
||
|
|||
|
VESA standard. Standard dimensions for the wall mount |
||
|
kits are described in the following table. |
||
|
Model |
60LN6150 |
|
|
VESA (A x B) |
400 x 400 |
|
|
A |
|
|
|
B |
|
|
|
Standard screw |
M6 |
|
|
Number of screws |
4 |
|
|
Wall mount bracket |
LSW430B |
|
|
(optional) |
|
|
CAUTION
yyDisconnect the power before moving or installing the TV. Otherwise electric shock may occur.
yyIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact the local dealer or qualified personnel.
yyDo not over tighten the screws as this may cause damage to the TV and void your warranty.
yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
NOTE
yyUse the screws that are listed in the VESA standard screw specifications.
yyThe wall mount kit includes an installation manual and necessary parts.
yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.
yyThe length of screws may differ depending upon the wall mount. Make sure to use the proper length.
yyFor more information, refer to the manual supplied with the wall mount.
MAKING CONNECTIONS 17
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.
NOTE
yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.
yyThe external device connections shown may differ slightly from illustrations in this manual. yyConnect external devices to the TV regardless of the order of the TV port.
yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device. yyRefer to the external equipment’s manual for operating instructions.
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional.
ANTENNA/
CABLE IN
Coaxial (75Ω)
(*Not Provided)
CAUTION
yyMake sure not to bend the copper wire of the RF cable.
Copper wire
yyComplete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
VHF Antenna
UHF Antenna
Antenna
Terminal
NOTE
yyUse a signal splitter to use more than 2 TVs. yyVisit ‘http://lgknowledgebase.com’ for more information about the antenna and cable
connection. Search for antenna.
yyDTV Audio Supported Codec: MPEG, Dolby Digital.
<![endif]>ENGLISH
18 MAKING CONNECTIONS
Connecting to a HD receiver, DVD Player, or VCR
Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.
NOTE
yyUse the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function. yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yyHDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz / 88 kHz / 96 kHz / 176 kHz / 192 kHz).
Choose any HDMI input port to connect.
It does not matter which port you use.
<![endif]>ENGLISH
<![endif]>IN 3(MHL)
(*Not Provided)
<![if ! IE]><![endif]>IN2
DVD / Blu-Ray / HD Cable Box / HD STB
<![if ! IE]><![endif]>IN1(ARC)
ARC (Audio Return Channel)
yyWhen connected with a high-speed HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable.
yyARC is only supported on the HDMI input 1 (ARC) port. An external audio device that supports ARC should be connected to HDMI 1 if you wish to use ARC
MAKING CONNECTIONS 19
DVI to HDMI Connection
Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
NOTE
yyWhen using the HDMI/DVI cable, Single link is only supported.
Choose any HDMI input port to connect.
It does not matter which port you use.
<![if ! IE]><![endif]>IN 3(MHL)
(*Not Provided)
<![if ! IE]><![endif]>IN 2
<![endif]>IN 1(ARC)
VIDEO/ Y |
PB |
PR |
COMPONENT IN / AV IN
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
AUDIO OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|||
(*Not Provided) |
|
|
|
|
|
|
||
DVI OUT |
<![endif]>ENGLISH
DVD / Blu-Ray / HD Cable Box
20 MAKING CONNECTIONS
Connecting to a mobile phone
Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.
NOTE
yyConnect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV. yyThis only works for the MHL-enabled phone.
yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone. yyAn MHL passive cable is needed to connect the TV and a mobile phone.
yyRemove the MHL cable from the TV when:
-the MHL function is disabled.
-your mobile device is fully charged in standby mode.
<![endif]>IN 3(MHL)
<![if ! IE]><![endif]>ENGLISH
Cable
Provided)
Mobile phone
MAKING CONNECTIONS 21
Component Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration.
NOTE
yyIf cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. yyCheck to ensure the cables are matched with the corresponding color connection.
PC-AUDIO IN
VIDEO/ Y PB |
PR |
L/MONO |
AUDIO R |
|
|
COMPONENT IN / AV IN |
|
<![if ! IE]> <![endif]>ENGLISH |
|||
<![if ! IE]> <![endif]>GREEN |
<![if ! IE]> <![endif]>BLUE |
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
|
<![if ! IE]> <![endif]>Provided) (*Not |
|
|
<![if ! IE]> <![endif]>Provided) (*Not |
|
|
<![if ! IE]> <![endif]>GREEN |
<![if ! IE]> <![endif]>BLUE |
<![if ! IE]> <![endif]>RED |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
L |
R |
VIDEO |
AUDIO |
DVD / Blu-Ray / HD Cable Box
22 MAKING CONNECTIONS
Composite Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.
NOTE
yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. yyCheck to ensure the cables are matched with the corresponding color connection.
PC-AUDIO IN
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
|
|||||
|
|
VIDEO/ |
|
Y |
|
P |
B |
P |
R |
L/MONO |
|
R |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMPONENT IN / AV IN |
|
|||||||||||||||
<![if ! IE]> <![endif]>ENGLISH |
|
|
<![if ! IE]> <![endif]>YELLOW |
|
|
|
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
|||||||||
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>Provided) (*Not |
|
<![if ! IE]> <![endif]>YELLOW |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
VIDEO |
L (MONO) AUDIO R |
|
VCR / DVD / Blu-Ray / HD Cable Box
MAKING CONNECTIONS 23
Connecting to a PC
NOTE
yyIt is recommended to use an HDMI connection for the best image quality.
yyDepending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
yyThe synchronization input form for Horizontal and Vertical frequencies is separate.
yyDepending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
yyIf you are using DVI out from a PC, you have to connect analog audio separately. Refer to the instructions on the next page.
yyWhen using the HDMI/DVI cable, Single link is only supported.
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.
Method A: HDMI Connection
Choose any HDMI input port to connect.
It does not matter which port you use.
<![if ! IE]><![endif]>IN 3(MHL)
(*Not Provided)
<![if ! IE]><![endif]>IN 2
PC
<![if ! IE]><![endif]>IN 1(ARC)
<![endif]>ENGLISH
24 MAKING CONNECTIONS
Method B: DVI to HDMI Connection
Choose any HDMI input port to connect.
It does not matter which port you use.
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>IN 3(MHL) |
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>IN 2 |
VIDEO/ |
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>1(ARC) |
|
|
|
P |
|||||||
|
Y |
P |
B |
R |
|||||
|
COMPONENT IN / AV IN |
||||||||
|
<![if ! IE]> <![endif]>IN |
||||||||
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>ENGLISH |
<![if ! IE]> <![endif]>WHITE |
<![if ! IE]> <![endif]>RED |
(*Not Provided)
(*Not Provided)
AUDIO OUT |
DVI OUT |
PC
MAKING CONNECTIONS 25
Connecting to an Audio System
You may use an optional external audio system instead of the built-in speaker.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.
NOTE
yyDo not look into the optical output port. Looking at the laser beam may damage your vision. yyAudio with ACP (Audio Copy Protection) function may block digital audio output.
OPTICAL
DIGITAL
AUDIO OUT
<![endif]>ENGLISH
<![endif]>Provided) (*Not
OPTICAL AUDIO IN
Digital Audio System
<![endif]>ENGLISH
26 MAKING CONNECTIONS
Connecting Headphones
You listen to the sound using headphones.
NOTE
yyAUDIO menu options are disabled when headphones are connected.
yyWhen changing AV MODE with headphones connected, the change is applied to video but not to audio. yyOptical Digital Audio Out is not available when headphones are connected.
yyHeadphone impedance: 16 Ω yyMax audio output: 10 mW to 15 mW
yyHeadphone jack size: 0.35 cm (0.13 inches)
Headphone
H/P OUT
(*Not Provided)
Connecting a USB Drive
Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB memory card reader to the TV.
NOTE
yySome USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.
Choose any USB input port to connect.
It does not matter which port you use.
(*Not Provided)
<![if ! IE]><![endif]>USB 3IN
USB
<![if ! IE]><![endif]>USB 2IN
USB Hub
<![if ! IE]><![endif]>USB IN 1
REMOTE CONTROL 27
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover,
replace batteries (1.5 V AAA) matching the and
ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
RATIO INPUT
TV
1 2 3
4 5 6
7 8 9
0 FLASHBK
LIST
FAV
P
VOL SETTINGS CH A
G
E
MUTE
Q.MENU
INFO |
SMART MY APPS |
|
OK
BACK |
AV MODE EXIT |
|
(POWER)
Turns the TV on or off.
(User Guide)
Sees user-guide.
RATIO
Resizes an image.
INPUT
Changes the input source. Turns the TV on if it is off.
TV
Returns to the last TV channel.
Number button
Enters numbers.
LIST
Accesses the saved channel list.
- (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.
FLASHBK
Tunes to the last channel viewed.
VOL
Adjusts the volume level.
FAV
Accesses your favorite channel list.
SETTINGS
Accesses the main menu.
MUTE
Mutes all sounds.
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
<![endif]>ENGLISH
28 REMOTE CONTROL
<![endif]>ENGLISH
RATIO INPUT
TV
1 2 3
4 5 6
7 8 9
0 FLASHBK
LIST
FAV
P
VOL SETTINGS CH A
G
E
MUTE
Q.MENU
INFO |
SMART MY APPS |
|
OK
BACK |
AV MODE EXIT |
|
INFO
Shows information on the current program.
SMART
Accesses the Smart Home menu.
MY APPS
Shows the list of Apps.
Q.MENU
Accesses the quick menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
BACK
Returns to the previous level.
AV MODE
Selects an AV mode.
EXIT
Clears all on-screen displays and returns to TV viewing.
Color buttons
These access special functions in some menus. (: Red,
: Green,
: Yellow,
: Blue)
Control buttons ( , ,
, , )
Controls the SIMPLINK compatible devices (USB,SIMPLINK).
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.