OWNER’S MANUAL
LCD TV / LED LCD TV / PLASMA TV
Please read this manual carefully before operating the set and retain it for future reference.
www.lg.com
ENGLISH
LICENSES 3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
<Analog TV>
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
<Digital TV>
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
<![endif]>ENGLISH
<![endif]>ENGLISH
4TABLE OF CONTENTS
3 |
LICENSES |
42 |
- NOW/NEXT Guide Mode |
||
42 |
- 8 Day Guide Mode |
||||
|
|
||||
4 |
|
42 |
- Date Change Mode |
||
TABLE OF CONTENTS |
42 |
- Extended Description Box |
|||
|
|
42 |
- Remind Setting Mode |
||
6 |
ASSEMBLING AND PREPAR- |
42 |
- Schedule List Mode |
||
43 |
MHEG (Multimedia and Hypermedia In- |
||||
|
ING |
|
|
formation coding Expert Group) (In digital |
|
6 |
Unpacking |
|
|
mode) |
|
9 |
Separate purchase |
43 |
- Teletext Within Digital Service |
||
9 |
Parts and buttons |
43 |
- Teletext in Digital Service |
||
20 |
Lifting and moving the TV |
44 |
- Switch on/off MHEG |
||
20 |
Setting up the TV |
44 |
- Select a programme |
||
20 |
- Attaching the stand |
44 |
- Programme Listing Mode |
||
24 |
- Not using the Desk Type Stand |
44 |
- NOW/NEXT Guide Mode |
||
25 |
- Mounting on a table |
45 |
Using additional options |
||
25 |
- Positioning your display |
45 |
- Adjusting aspect ratio |
||
26 |
- Mounting on a wall |
46 |
- Changing AV modes |
||
28 |
- Tidying cables |
46 |
- Using the input list |
||
29 |
- Connection of TV |
47 |
- Locking the buttons on the TV (Child |
||
|
|
|
|
Lock) |
|
30 |
REMOTE CONTROL |
48 |
Using the quick menu |
||
49 |
Using customer Support. |
||||
|
|
||||
33 WATCHING TV |
49 |
- Testing Software Update |
|||
50 |
- Testing the Picture / Sound |
||||
|
|
50 |
- Using Signal Test |
||
33 |
Connecting an antenna |
||||
50 |
- Using the product or service information |
||||
33 |
Turning the TV on for the first time |
||||
|
|
|
|||
34 |
Watching TV |
|
51 3D Imaging |
||
35 |
Managing programmes |
|
|||
35 |
- Automatically setting up programme |
51 |
3D Technology |
||
35 |
- Manually setting up programme (In |
52 |
- When Using 3D Glasses |
||
|
digital mode) (Only DTV) |
52 |
- 3D Imaging Viewing Range |
||
36 |
- Manually setting up programme (In |
53 |
Watching 3D images |
||
|
analogue mode) |
|
|
|
|
37 |
- Editing your programme list |
|
55 ENTERTAINMENT |
||
39 |
- Selecting the programme list |
|
|||
55 |
- Connecting USB storage devices |
||||
41 |
EPG (Electronic Program Guide) (In digi- |
||||
|
tal mode) |
56 |
- Browsing files |
||
41 |
- Switch on/off EPG |
57 |
- Viewing movies |
||
41 |
- Select a programme |
60 |
- Viewing photos |
|
|
|
|
TABLE OF CONTENTS 5 |
|
62 |
- Listening to music |
90 |
- Page selection |
|
|
64 |
- DivX® VOD Guide |
90 |
Special Teletext Function |
||
65 CUSTOMIZING TV SETTINGS |
|
91 |
MAINTENANCE |
||
65 |
Accessing main menus |
91 |
Cleaning your TV |
||
66 |
Customizing settings |
91 |
- Screen and frame |
||
66 |
- SETUP settings |
91 |
- Cabinet and stand |
||
67 |
- PICTURE settings |
91 |
- Power cord |
||
73 |
- AUDIO settings |
91 |
Preventing “Image burn” or “Burn-in” on |
||
76 |
- TIME settings |
|
|
your TV screen |
|
77 |
- LOCK settings |
|
|
|
|
78 |
- OPTION settings |
|
92 |
TROUBLESHOOTING |
|
|
|
||||
80 MAKING CONNECTIONS |
94 |
SPECIFICATIONS |
|||
|
|
81Connection overview
82Connecting to a HD receiver, DVD, or
|
VCR player |
103IR CODES |
||
82 |
- HDMI connection |
|
|
|
82 |
- DVI to HDMI connection |
104EXTERNAL CONTROL DEVICE |
||
82 |
- Component connection |
|||
83 |
- Composite connection |
|
SETUP |
|
84 |
Connecting to a PC |
104 |
RS-232C Setup |
|
84 |
- HDMI connection |
104 |
Type of connector; |
|
85 |
- DVI to HDMI connection |
|
D-Sub 9-Pin Male |
|
85 |
- RGB Connection |
104 |
RS-232C Configurations |
|
86 |
Connecting to an audio system |
105 |
Communication Parameters |
|
86 |
- Digital optical audio connection |
105 |
Command reference list |
|
87 |
- Headphone connection |
106 |
Transmission / Receiving Protocol |
|
87 |
- Speaker output Setup |
|
|
|
87 |
Connecting to a USB |
111 OPEN SOURCE LICENSE |
||
88 |
SIMPLINK connection |
|||
111 |
Open source software notice |
|||
88 |
- Activating the SIMPLINK feature |
89 TELETEXT
89Switch On/Off
89Simple Text
89- Page selection
89Top Text
89- Block / Group / Page Selection
89- Direct Page Selection
90Fastext
<![endif]>ENGLISH
6ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product.
The illustrations in this manual may differ from the actual product and item.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control and batteries(AAA) |
Owner’s manual |
<![endif]>ENGLISH
Polishing cloth1 (This item is not |
Ferrite core (Depending on model) |
included for all models.) |
(This item is not included for all |
|
models.) |
1Gently wipe the spots on the cabinet with the polishing cloth.
Only Plasma TV |
|
|
|
x 4 |
x 3 |
x 4 |
x 3 |
M4 x 26 |
M5 x 14.5 |
M4 x 28 |
M5 x 24 |
(Except for 60PV25**, |
(Only 60PV25**, |
||
60PZ55**) |
|
60PZ55**) |
|
Power Cord(This item is not included for all models.)
Screw for assembly |
Cable Holder |
Power Cord holder |
Protection cover |
Protection cover |
3D Glasses1 |
|
tape |
(AG-S250 : Depending on model) |
||
|
(This item is not included for all models.)
ASSEMBLING AND PREPARING 7
Only 22LK33**
Cable Holder |
Protection cover |
|
|
Only 26/32LK33**, 32/42LK43**, 42/47/55LK53**, 32/37/42/47LK45**, 47LK95** |
|
||
x 8 |
|
|
|
(M4x20) |
(Except for 47/55LK53**, |
|
(Only 47LK95**) |
|
47LK45**, 47LK95**) |
|
|
|
|
|
|
Screw for assembly |
Screw for fixing |
Protection cover |
FPR 3D Glasses1 |
Only 19/22/26LV25**, 22/26LV55** , 26LV30**
x 2 |
x 2 |
x 4 |
M4x16 |
M4x12 |
M3x8 |
(Except for 26LV30**) |
(Only 26LV30**) |
Screw for assembly
or |
DC Adapter |
|
|
||
Cable holder |
|
|
(Depending on model) |
Composite gender cable |
|
(This item is not included for |
(Except for 26LV30**) |
|
all models.) |
||
|
Only 32LV25**, 32/37/42/47/55LV35**, 32LV30**, 32/42LV34**, 32/42/47/55LW45**, 42/47LW54**, 32/42LV33**
x 8 |
x 8 |
|
|
M4 x 14 |
M4 x 12 |
(Only 32LV25**, 32/37LV35**, |
|
32LV34**, 32LW45**, 32LV30**, |
|||
(Only 32LV25**) |
(Except for 32LV25**) |
||
32LV33**) |
|||
|
|
Screw for assembly
(Only 32/42/47/55LW45**, 42/47LW54**)
FPR 3D Glasses1
Cable holder |
Screw for fixing Composite gender cable |
|
(Depending on model) |
(Except for 32LV30**, |
|
(This item is not included for |
||
32/42LV34**, |
||
all models.) |
||
|
32/42LV33**) |
<![endif]>ENGLISH
1The number of 3D glasses may differ depending on the country.
<![endif]>ENGLISH
8ASSEMBLING AND PREPARING
Caution
yyDo not use any pirated items to ensure the safety and product life span.
yyAny damages or injuries by using pirated items are not covered by the warranty.
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yyImage shown may differ from your TV.
yyHow to use the ferrite core (Depending on model)
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
[to an External device] |
10 mm(+ / - 5 mm) |
[to the TV] |
|
[Figure 1] |
[Cross Section of |
|
Ferrite Core] |
2Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.
[to a wall plug] |
[to the TV] |
[Figure 2] |
[Cross Section of |
|
Ferrite Core] |
3Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to a wall plug] |
[to the TV] |
[Figure 3] |
[Cross Section of |
|
Ferrite Core] |
-If there is one ferrite core, follow as shown in Figure 1.
-If there are two ferrite cores, follow as shown in Figures 1 and 2.
-If there are three ferrite cores, follow as shown in Figures 1 and 3.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.(Except for Plasma TV, 22/26/32LK33**, 32/42LK43**, 42/47/55LK53**, 47LK95**)
*A 10 mm *B
18 mm
A A
ASSEMBLING AND PREPARING 9
Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.
These devices only work with compatible LG Plasma TV, LED LCD TV or LCD TV.
Only Plasma TV |
Only LCD / LED LCD TV |
3D Glasses |
FPR 3D Glasses1 |
|
(AG-S230, AG-S250, AG-S270 : Only |
(AG-F2** : Only 3D Models) |
|
3D Models) |
||
|
1The model name or design may be changed depending on the upgrade of product functions, manufacturer's circumstances or policies.
<![if ! IE]><![endif]>ENGLISH
NOTE
yyThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
yyThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
Caution
yyDo not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall.
yyDo not drag the TV. The floor or the product may be damaged.
yySome models have a thin film attached on to the screen and this must not be removed.
10 ASSEMBLING AND PREPARING
yyImage shown may differ from your TV.
Only 50/60PV25**, 42/50PT25**
Screen
<![endif]>ENGLISH
USB input
HDMI IN
AV (Audio and
Video) IN
<![endif]>USB IN
<![if ! IE]> <![endif]>IN 2 |
<![if ! IE]> <![endif]>R |
<![endif]>AUDIO
<![if ! IE]> <![endif]>MONO |
<![if ! IE]> <![endif]>VIDEO |
AV IN 2
Speakers
Remote control and intelligent1 sensors
Power indicator
Red – In Standby mode
Off – TV turns on
INPUT HOME OK |
P |
Touch buttons2 |
|
AV IN 1 |
OPTICAL |
|
|
|
DIGITAL |
|
|
|
AUDIO OUT |
|
|
<![if ! IE]> <![endif]>COMPONENT IN AUDIO VIDEO R L PR |
<![if ! IE]> <![endif]>1 |
<![if ! IE]> <![endif]>R AUDIO L/MONO |
<![if ! IE]> <![endif]>2 |
1 |
/DVI IN |
AUDIO IN (RGB/DVI)
RGB IN (PC)
ANTENNA IN
RS-232C IN
(CONTROL & SERVICE)
Connection panel (See p.80)
Button |
Description |
/I |
Turns the power on or off |
|
|
INPUT |
Changes the input source |
HOME |
Accesses the main menus, or saves your input and exits the menus |
OK |
Selects the highlighted menu option or confirms an input |
- + |
Adjusts the volume level |
v P ^ |
Scrolls through the saved programmes |
1Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2Touch Button - You can use the desired button function by touching.
ASSEMBLING AND PREPARING 11
yyImage shown may differ from your TV.
Only 42/50PW35**, 42/50PW45**, 50/60PZ55**, 42/50PT35**
Screen
USB input |
<![if ! IE]> <![endif]>IN |
|
|
|
<![if ! IE]> <![endif]>USB |
|
|
HDMI IN |
<![if ! IE]> <![endif]>IN 3 |
|
|
|
|
||
AV (Audio and |
<![if ! IE]> <![endif]>L/MONO AUDIO R |
|
|
<![if ! IE]> <![endif]>VIDEO |
|
||
Video) IN |
Speakers |
||
AV IN 2 |
Remote control and intelligent1 sensors
Power indicator
Red – In Standby mode
Off – TV turns on
INPUT HOME OK |
P |
Touch buttons2 |
AV IN 1
<![if ! IE]> <![endif]>Y |
|
|
|
<![if ! IE]> <![endif]>COMPONENT IN AUDIO VIDEO R L PR |
<![if ! IE]> <![endif]>1 |
<![if ! IE]> <![endif]>R AUDIO L/MONO |
<![if ! IE]> <![endif]>2 |
OPTICAL
DIGITAL 2
AUDIO OUT
IN
1
AUDIO IN (RGB/DVI)
RGB IN (PC)
ANTENNA IN
RS-232C IN
(CONTROL & SERVICE)
Connection panel (See p.80)
Button |
Description |
/I |
Turns the power on or off |
INPUT |
Changes the input source |
HOME |
Accesses the main menus, or saves your input and exits the menus |
|
|
OK |
Selects the highlighted menu option or confirms an input |
|
|
- + |
Adjusts the volume level |
v P ^ |
Scrolls through the saved programmes |
<![endif]>ENGLISH
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2Touch Button - You can use the desired button function by touching.
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
yyImage shown may differ from your TV.
Only 22LK33**
Screen
INPUT HOME OK
USB input |
<![if ! IE]> <![endif]>IN |
|
<![if ! IE]> <![endif]>USB |
Headphone |
<![if ! IE]> <![endif]>R |
Socket |
<![if ! IE]> <![endif]>H/P |
<![if ! IE]> <![endif]>R |
Speakers
P
Remote control
Power Indicator
(Can be adjusted using the Power Indicator in the OPTION menu.)
OPTICAL |
(RGB/DVI) |
||||
DIGITAL |
AUDIO IN |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT
RGB IN (PC)
RS-232C IN(CONTROL & SERVICE)
1 VIDEO
OL/MONO
<![endif]>AUDI
2 |
1 |
<![if ! IE]> <![endif]>R |
ANTENNA/ CABLE IN
Connection panel (See p.80)
Button |
Description |
/I |
Turns the power on or off |
|
|
INPUT |
Changes the input source |
HOME |
Accesses the main menus, or saves your input and exits the menus |
|
|
OK |
Selects the highlighted menu option or confirms an input |
|
|
- + |
Adjusts the volume level |
v P ^ |
Scrolls through the saved programmes |
ASSEMBLING AND PREPARING 13
yyImage shown may differ from your TV.
Only 26/32LK33**, 32/42LK43**
USB input |
<![if ! IE]> <![endif]>USB IN |
|
|
||
HDMI IN |
<![if ! IE]> <![endif]>IN 3 |
|
|
||
|
<![if ! IE]> <![endif]>R |
|
Headphone |
<![if ! IE]> <![endif]>H/P |
|
|
||
Socket |
<![if ! IE]> <![endif]>R |
|
<![if ! IE]> <![endif]>L/MONO AUDIO |
||
|
||
AV (Audio and |
<![if ! IE]> <![endif]>VIDEO |
|
AV IN 2 |
||
Video) IN |
|
Screen
Speakers
OPTICAL DIGITAL |
AUDIO IN |
||||||
AUDIO OUT |
(RGB/DVI) |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RGB IN (PC)
RS-232C IN(CONTROL & SERVICE)
2 |
1 |
<![if ! IE]> <![endif]>O |
1 |
<![if ! IE]> <![endif]>VIDE |
|
<![if ! IE]> <![endif]>OL/MONO |
|
<![if ! IE]> <![endif]>AUDI |
|
<![if ! IE]> <![endif]>R |
|
(Only |
(Only |
26/32LK33**) |
32/42LK43**) |
P |
|
|
P |
|
OK |
OK |
|
|
HOME |
HOME |
|
|
INPUT |
INPUT |
|
Remote control and intelligent1 sensors
Power Indicator
(Can be adjusted using the Power Indicator in the OPTION menu.)
ANTENNA/
CABLE IN
Connection panel (See p.80)
Button |
Description |
/I |
Turns the power on or off |
|
|
INPUT |
Changes the input source |
HOME |
Accesses the main menus, or saves your input and exits the menus |
|
|
OK |
Selects the highlighted menu option or confirms an input |
|
|
- + |
Adjusts the volume level |
v P ^ |
Scrolls through the saved programmes |
1Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment. (only 32LK430Z)
<![endif]>ENGLISH
<![endif]>ENGLISH
14 ASSEMBLING AND PREPARING
yyImage shown may differ from your TV.
Only 42/47/55LK53**, 47LK95**
|
|
Screen |
USB input |
<![if ! IE]> <![endif]>IN |
|
|
<![if ! IE]> <![endif]>USB |
|
HDMI IN |
<![if ! IE]> <![endif]>IN 3 |
|
|
|
|
Headphone |
<![if ! IE]> <![endif]>R |
|
Socket |
<![if ! IE]> <![endif]>R |
|
|
<![if ! IE]> <![endif]>AUDIO |
|
AV (Audio and |
<![if ! IE]> <![endif]>L/MONO |
|
<![if ! IE]> <![endif]>VIDEO |
Speakers |
|
Video) IN |
AV IN 2 |
P
OK
HOME
INPUT
Remote control and intelligent1 sensors
Power Indicator
(Can be adjusted using the Power Indicator in the OPTION menu.)
|
OPTICALDIGITAL |
(RGB/DVI) |
|
|
COMPONENT IN |
|
|
|
|
|
|
|
|
||
|
AUDIOOUT |
AUDIO IN |
|
<![if ! IE]> <![endif]>O |
|
<![if ! IE]> <![endif]>Y |
|
|
|
|
|
|
|
||
|
|
|
<![if ! IE]> <![endif]>O |
<![if ! IE]> <![endif]>VIDE |
|
<![if ! IE]> <![endif]>BP |
|
|
|
|
AV IN 1 |
|
|
|
|
|
RGB IN (PC) |
<![if ! IE]> <![endif]>VIDE |
|
|
<![if ! IE]> <![endif]>RP |
|
|
|
<![if ! IE]> <![endif]>L/MONOAUDI |
<![if ! IE]> <![endif]>AUDIO |
|
<![if ! IE]> <![endif]>RL |
Connection panel |
||
|
|
|
|
||||
|
|
|
|
|
|
|
ANTENNA / |
|
RS-232CIN(CONTROL&SERVICE) |
|
|
|
|
CABLE IN |
|
|
|
|
|
|
|
||
/ DVI IN |
2 |
1 |
<![if ! IE]> <![endif]>R |
|
2 |
1 |
(See p.80) |
|
|
|
|
|
|
Button |
Description |
/I |
Turns the power on or off |
|
|
INPUT |
Changes the input source |
HOME |
Accesses the main menus, or saves your input and exits the menus |
OK |
Selects the highlighted menu option or confirms an input |
|
|
- + |
Adjusts the volume level |
v P ^ |
Scrolls through the saved programmes |
1Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
y yImage shown may differ from your TV.
Only 32/37/42/47LK45**
(Only |
|
(Except for |
|
|
32/37/42/47LK455C) |
|
32/37/42/47LK455C) |
||
|
|
|
|
Screen |
|
<![if ! IE]> <![endif]>USB IN |
1 |
<![if ! IE]> <![endif]>USB IN |
|
|
<![if ! IE]> <![endif]>IN 3 |
2 |
<![if ! IE]> <![endif]>IN 3 |
|
|
|
|
|
|
5 |
<![if ! IE]> <![endif]>OUT |
3 |
<![if ! IE]> <![endif]>R |
|
<![if ! IE]> <![endif]>R |
|
|
|
|
|
<![if ! IE]> <![endif]>SPEAKE |
|
|
|
|
<![if ! IE]> <![endif]>R |
|
<![if ! IE]> <![endif]>R |
|
|
<![if ! IE]> <![endif]>AUDIO |
4 |
<![if ! IE]> <![endif]>AUDIO |
|
|
<![if ! IE]> <![endif]>L/MONO |
<![if ! IE]> <![endif]>L/MONO |
|
|
|
|
|
||
|
<![if ! IE]> <![endif]>VIDEO |
|
<![if ! IE]> <![endif]>VIDEO |
|
|
AV IN 2 |
|
AV IN 2 |
Speakers |
|
|
|
|
No. Description
1 USB input
2HDMI IN
3Headphone Socket
4AVIN (Audio and Video)
5SPEAKER OUT
OPTICAL DIGITAL |
AUDIO IN |
||||||
AUDIO OUT |
(RGB/DVI) |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RGB IN (PC)
RS-232C IN(CONTROL & SERVICE)
2 |
1 |
1 VIDEO
L/MONO
<![endif]>AUDIO
<![if ! IE]><![endif]>R
ASSEMBLING AND PREPARING 15
Remote control and intelligent1 sensors
Power Indicator
(Can be adjusted using the Power Indicator in the
OPTION menu.)
Touch buttons2
<![endif]>ENGLISH
ANTENNA/
CABLE IN
Connection panel (See p.80)
Button |
Description |
/I |
Turns the power on or off |
INPUT |
Changes the input source |
HOME |
Accesses the main menus, or saves your input and exits the menus |
|
|
OK |
Selects the highlighted menu option or confirms an input |
|
|
- + |
Adjusts the volume level |
v P ^ |
Scrolls through the saved programmes |
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2Touch Button - You can use the desired button function by touching.
<![endif]>ENGLISH
16 ASSEMBLING AND PREPARING
yyImage shown may differ from your TV.
Only 19/22/26LV25**
Screen
USB input |
<![if ! IE]> <![endif]>IN |
|
<![if ! IE]> <![endif]>USB |
Headphone
Socket
AV (Audio and |
AV IN 2 |
|
VIDEO/AUDIO |
Video) IN |
Speakers |
|
OPTICAL |
(RGB/DVI) |
|
DIGITAL |
|
|
AUDIO OUT |
AUDIO IN |
|
||
|
|
|
DC-IN
|
|
|
OAV IN 1 |
|
|
RGB IN (PC) |
<![if ! IE]> <![endif]>VIDE |
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>L/MONOO |
|
RS-232C IN(CONTROL&SERVICE) |
||
|
|
|
<![if ! IE]> <![endif]>AUDI |
/ DVI IN |
|
|
<![if ! IE]> <![endif]>R |
2 |
1 |
|
|
|
|
Remote control and intelligent1 sensors
Power Indicator
(Can be adjusted using the Power Indicator in the
OPTION menu.)
Touch buttons2
COMPONENT |
|
|
|
|
IN |
|
|
<![if ! IE]> <![endif]>O |
<![if ! IE]> <![endif]>Y |
|
|
<![if ! IE]> <![endif]>VIDE |
<![if ! IE]> <![endif]>BP |
|
|
|
<![if ! IE]> <![endif]>RP |
|
|
<![if ! IE]> <![endif]>O |
|
|
|
<![if ! IE]> <![endif]>AUDI |
<![if ! IE]> <![endif]>L |
|
|
|
|
Connection panel |
|
|
<![if ! IE]> <![endif]>R |
|
|
|
|
ANTENNA/ |
(See p.80) |
|
|
CABLE IN |
|
|
|
|
Button |
Description |
v P ^ |
Scrolls through the saved programmes |
- + |
Adjusts the volume level |
|
|
OK |
Selects the highlighted menu option or confirms an input |
|
|
HOME |
Accesses the main menus, or saves your input and exits the menus |
|
|
INPUT |
Changes the input source |
|
|
/I |
Turns the power on or off |
|
|
1Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2Touch Button - You can use the desired button function by touching.
ASSEMBLING AND PREPARING 17
yyImage shown may differ from your TV.
Only 32LV25**, 32/37/42/47/55LV35**, 32/42LV34**, 32/42/47/55LW45**, 42/47LW54**, 32/42LV33**
|
|
(Only |
|
|
(Only 32/42LV34**, 32/42LV33**) |
||
|
|
32/42LV34**, 32/42LV33**) |
|
|
(Only |
||
|
|
|
|
Screen |
|
P |
|
|
|
|
|
P |
42/47LW54**) |
||
|
|
|
|
|
|
|
|
USB input |
<![if ! IE]> <![endif]>USB IN |
<![if ! IE]> <![endif]>IN |
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>USB |
|
|
|
|
|
|
|
|
|
|
|
OK |
|
|
|
|
|
|
OK |
HOME |
|
|
|
|
|
|
|
||
|
|
|
|
|
HOME |
INPUT |
|
|
|
|
|
|
INPUT |
|
|
HDMI IN |
|
|
<![if ! IE]> <![endif]>3 |
|
|
|
|
Headphone |
|
|
<![if ! IE]> <![endif]>IN |
|
|
|
Remote control and |
|
|
|
|
|
|
||
Socket |
|
|
|
|
|
|
intelligent1 sensors |
AV (Audio and |
|
AV |
O |
|
|
|
Power Indicator |
|
|
2 |
AUDI |
|
|
|
|
Video) IN |
|
IN |
/ |
Speakers |
|
|
(Can be adjusted using |
|
|
VIDEO |
|
|
|||
|
|
(Except for |
|
|
|
the Power Indicator in the |
|
|
32/42LV34**, |
|
|
|
OPTION menu.) |
||
|
|
|
|
|
|||
|
32/42LV33**) |
|
|
|
Touch buttons2 |
||
|
|
|
|
|
|
|
(Except for 32/42LV34**, |
|
|
|
|
|
|
|
32/42LV33** |
|
|
|
|
|
|
|
42/47LW54**) |
OPTICAL |
DIGITAL |
AUDIO OUT |
RGB IN (PC)
RS-232C IN(CONTROL & SERVICE)
(RGB/DVI) AUDIO IN
<![if ! IE]> <![endif]>O |
1 |
<![if ! IE]> <![endif]>VIDE |
|
<![if ! IE]> <![endif]>L/MONO |
|
<![if ! IE]> <![endif]>AUDIO |
|
ANTENNA/ CABLE IN
or
OPTICAL |
DIGITAL |
AUDIO OUT |
RGB IN (PC)
RS-232C IN(CONTROL & SERVICE)
(RGB/DVI) AUDIO IN
<![endif]>O
<![if ! IE]><![endif]>VIDE
<![endif]>L/MONO
<![if ! IE]><![endif]>AUDIO
ANTENNA/ CABLE IN
Connection panel (See p.80)
2 |
1 |
<![if ! IE]> <![endif]>R |
|
2 |
1 |
<![if ! IE]> <![endif]>R |
|
|
2 |
1 |
2 |
1 |
|||||
|
|
|
|
Button |
Description |
|
v P ^ |
Scrolls through the saved programmes |
|
- |
+ |
Adjusts the volume level |
|
|
|
OK |
or OK |
Selects the highlighted menu option or confirms an input |
|
|
|
HOME |
Accesses the main menus, or saves your input and exits the menus |
|
|
|
|
INPUT |
Changes the input source |
|
|
|
|
|
/I |
Turns the power on or off |
|
|
|
<![endif]>ENGLISH
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2Touch Button - You can use the desired button function by touching.
<![endif]>ENGLISH
18 ASSEMBLING AND PREPARING
yyImage shown may differ from your TV.
Only 22/26LV55** |
|
Screen |
|
|
|
|
|
USB input |
<![if ! IE]> <![endif]>IN |
|
|
|
<![if ! IE]> <![endif]>USB |
|
|
|
|
|
Remote control and |
|
|
|
intelligent1 sensors |
Headphone |
|
|
Power Indicator |
Socket |
|
|
(Can be adjusted using |
AV (Audio and |
AV IN 2 |
|
the Power Indicator in |
VIDEO/AUDIO |
|
the OPTION menu.) |
|
|
|
|
|
Video) IN |
|
Speakers |
|
|
|
|
Touch buttons2 |
|
OPTICAL |
AUDIO IN |
|
|
DIGITAL |
(RGB/DVI) |
|
DC-IN |
AUDIO OUT |
<![if ! IE]> <![endif]>O |
|
RGB IN (PC) |
<![if ! IE]> <![endif]>VIDE |
|
|
RS-232C IN |
<![if ! IE]> <![endif]>OL/MONO |
(CONTROL & SERVICE) |
|
<![if ! IE]> <![endif]>AUDI |
ANTENNA/ |
|
|
|
CABLE IN |
2 |
1 |
<![if ! IE]> <![endif]>R |
Connection panel (See p.80)
Button |
Description |
|
|
|
Scrolls through the saved programmes |
|
|
|
|
|
Adjusts the volume level |
|
|
|
|
|
Selects the highlighted menu option or confirms an input |
|
|
|
|
|
Accesses the main menus, or saves your input and exits the menus |
|
|
|
|
|
Changes the input source |
|
|
|
|
/I |
Turns the power on or off |
|
|
|
1Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2Touch Button - You can use the desired button function by touching.
ASSEMBLING AND PREPARING 19
yyImage shown may differ from your TV.
Only 26/32LV30**
Speakers
Screen
HDMI IN |
<![if ! IE]> <![endif]>3 |
|
<![if ! IE]> <![endif]>IN |
|
<![if ! IE]> <![endif]>R |
USB input |
<![if ! IE]> <![endif]>IN |
|
<![if ! IE]> <![endif]>USB |
(Except for |
|
OPTICAL |
AUDIO IN |
|
DIGITAL |
(RGB/DVI) |
|
32LV30**) |
|
AUDIO OUT |
|
|
DC-IN |
|
|
|
|
|
|
|
RGB IN (PC) |
|
|
|
|
<![if ! IE]> <![endif]>O |
|
|
<![if ! IE]> <![endif]>VIDE |
RS-232C IN |
|
|
(CONTROL & SERVICE) |
|
<![if ! IE]> <![endif]>L/MONOO |
|
|
|
|
|
<![if ! IE]> <![endif]>AUDI |
2 |
1 |
<![if ! IE]> <![endif]>R |
<![endif]>INPU HOMET OK
Remote control and intelligent1 sensors
Power Indicator
(Can be adjusted using the Power Indicator in the OPTION menu.)
<![if ! IE]><![endif]>ENGLISH
ANTENNA/
CABLE IN
Connection panel (See p.80)
Button |
Description |
v P ^ |
Scrolls through the saved programmes |
- + |
Adjusts the volume level |
OK |
Selects the highlighted menu option or confirms an input |
|
|
HOME |
Accesses the main menus, or saves your input and exits the menus |
INPUT |
Changes the input source |
|
|
/I |
Turns the power on or off |
|
|
1Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
<![endif]>ENGLISH
20 ASSEMBLING AND PREPARING
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
Caution
yyAvoid touching the screen at all times, as this may result in damage on the screen or some of the pixels used to create images.
yyIt is recommended to move the TV in the box or packing material that the TV originally came in.
yyBefore moving or lifting the TV, disconnect the power cord and all cables.
yyWhen holding the TV, the screen should face away from you to avoid damage.
yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
yyWhen transporting a large TV, there should be at least 2 people.
yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.
yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
yyImage shown may differ from your TV.
Put your TV on a pedestal stand and mount the TV on a table or wall.
Only Plasma TV
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
Stand Body
Stand Base
3 Secure the TV and the stand with the 4 screws.
Make sure to assemble the front and rear side of the stand.
Front
Rear
Caution
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING 21
Only 22LK33**
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2 Assemble the TV as shown.
Caution
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
Only 26/32LK33**, 32/42LK43**, 42/47/55LK53**, 47LK95**
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
Stand Body
Stand Base
3 Secure the TV and the stand with the 4 screws.
Caution
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
Only 32/37/42/47LK45**
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
Stand Body
Stand Base
3 Secure the TV and the stand with the 4 screws.
Caution
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
<![endif]>ENGLISH
<![endif]>ENGLISH
22 ASSEMBLING AND PREPARING
Only 19/22/26LV25**, 22/26LV55**
1Lay the TV with the screen side down on a flat surface.
Caution
Only 32LV25**
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
Stand Body |
Stand Base |
3 Secure the TV and the stand with the 2 screws. |
3 Secure the TV and the stand with the 4 screws. |
Caution
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
Caution
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING 23
Only 32/37/42/47/55LV35**, 32LV30**, 32/42LV34**, 32/42/47/55LW45**, 32/42LV33**
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
Only 26LV30**
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
Except for |
Stand Body |
|
|
32LV30** |
|
|
Stand Base |
|
Stand Body |
Only |
Stand Base |
32LV30** |
3 Secure the TV and the stand with the 4 screws.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
Stand Body
Stand Base
(M3x8)
3 Secure the TV and the stand with the 2 screws.
Except for |
|
32LV30** |
|
|
(M4x12) |
Only |
Caution |
32LV30** |
|
|
yyTighten the screws firmly to prevent |
|
the TV from tilting forward. Do not over |
|
tighten. |
Caution
<![endif]>ENGLISH
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
<![endif]>ENGLISH
24 ASSEMBLING AND PREPARING
Only 42/47LW54**
1Lay the TV with the screen side down on a flat surface.
Caution
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the parts of the Stand Body with the
Stand Base of the TV.
Stand Body
Stand Base
3 Assemble the TV as shown.
yyImage shown may differ from your TV.
Only Plasma TV
yyPush the supplied protection cover into the opening
at the bottom of the TV until it locks in place. yyAttach the protection cover tape.
-This will protect the opening from accumulating dust and dirt.
-When installing the wall mounting bracket, use the Protection cover.
Protection
cover tape
Protection cover
Only26/32LK33**,32/42LK43**,32/37/42/47LK45**, 42/47/55LK53**,47LK95**
1Pushthesuppliedprotectioncoverintotheopening atthebottomoftheTVuntilclickingsound.
4 Secure the TV and the stand with the 4 screws.
Caution
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
Only 22LK33** Protection cover
1Lay the TV with the screen side down on a flat surface.
2Remove the 2 screws and pull the stand away from the TV.
3Pushthesuppliedprotectioncoverintotheopening atthebottomoftheTVuntilitlocksinplace.
Thiswillprotecttheopeningfromaccumulatingdust anddirt.
Protection cover
yyImage shown may differ from your TV.
1Lift and tilt the TV into its upright position on a table.
-Leave a 10 cm (minimum) space from the wall for proper ventilation.
10 |
cm |
|
2 Connect the power cord to a wall outlet.
aution
not place the TV near or on sources of heat, as this may result in fire or other damage.
Adjusting the angle of the TV to suit view
(Except for 22LK33**, 19/22/26LV25**, 22/26LV55**, 26LV30**)
Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
20 |
20 |
ASSEMBLING AND PREPARING 25
aution
adjusting the angle of the product, watch out for your fingers.
Front
Rear
yyImage shown may differ from your TV. Only 22LK33**
Adjust the position of the panel in various ways for maximum comfort.
• Tilt range
12 |
0 |
0 |
3 |
|
<![endif]>ENGLISH
Securing the TV to a table
yyImage shown may differ from your TV. yyThis feature is not available for all models. Only 26/32LK33**, 32/42LK43**,
42LK53**,32/37/42LK45**, 32LV25**, 32/37LV35**, 32LV34**, 32LW45**, 32LV30**, 32LV33**
Fix the TV to a table to prevent from tilting forward, damage, and potential injury.
Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.
warning
preventTVfromfallingover,theTVshould besecurelyattachedtothefloor/wallper installationinstructions.Tipping,shaking,or rockingtheTVmaycauseinjury.
<![endif]>ENGLISH
26 ASSEMBLING AND PREPARING
Securing the TV to a wall
yyImage shown may differ from your TV. yyThis feature is not available for all models.
1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts position, remove the bolts first.
2Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
Caution
yyMake sure that children do not climb on or hang on the TV.
NOTE
yyUse a platform or cabinet that is strong and large enough to support the TV securely.
Using the Kensington security system
yyImage shown may differ from your TV. yyThis feature is not available for all models.
The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the TV
Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.
LG recommends that wall mounting be performed by a qualified professional installer.
10 cm
10 cm 10 cm
10 cm
ASSEMBLING AND PREPARING 27
Separate purchase(Wall Mounting Bracket) |
Model |
42LV34** |
|||
|
|
|
|
42LV33** |
|
Make sure to use screws and wall mount |
|
42/47LW54** |
|||
VESA (A x B) |
400 x 400 |
||||
bracket that meet the VESA standard. Standard |
Standard screw |
M6 |
|||
dimensions for the wall mount kits are described in |
Number of screws 4 |
||||
the following table. |
|
|
Wall mount |
LSW400BX, |
|
|
|
bracket |
LSW400BXG |
||
|
|
|
|||
Model |
42/50PT25** |
60PV25** |
|
|
|
|
50PV25** |
60PZ55** |
|
|
|
|
42/50PW35** |
|
|
|
|
|
42/50PW45** |
|
|
|
|
|
42/50PT35** |
|
|
|
|
|
50PZ55** |
|
|
|
|
VESA (A x B) |
400 x 400 |
600 x 400 |
|
|
|
Standard screw |
M6 |
M8 |
|
|
|
Number of screws 4 |
4 |
|
|
||
Wall mount |
PSW400B, |
PSW600B, |
Caution |
||
bracket |
PSW400BG |
PSW600BG |
|||
|
|
|
yyDisconnect the power first, and then |
||
|
|
|
move or install the TV. Otherwise electric |
||
|
|
|
shock may occur. |
||
|
|
|
yyIf you install the TV on a ceiling or slanted |
||
|
|
|
wall, it may fall and result in severe injury. |
||
Model |
22LK33** |
26/32LK33** |
Use an authorized LG wall mount bracket |
||
and contact the local dealer or qualified |
|||||
|
19/22/26LV25** |
32LK43** |
|||
|
22/26LV55** |
32LK45** |
personnel. |
|
|
|
26LV30** |
32LV25** |
yyDo not over tighten the screws as this |
||
|
|
32LV35** |
|||
|
|
may cause damage to the TV and void |
|||
|
|
32LV30** |
|||
|
|
32LV34** |
your warranty. |
||
|
|
32LV33** |
yyUse the screws and wall mount bracket |
||
|
|
32LW45** |
|||
|
|
that meet the VESA standard. Any |
|||
VESA (A x B) |
100 x 100 |
200 x 100 |
|||
damages or injuries by misuse or using |
|||||
Standard screw |
M4 |
M4 |
|||
Number of screws |
4 |
4 |
an improper accessory are not covered |
||
Wall mount |
LSW100B, LSW100BG |
by the warranty. |
|||
bracket |
|
|
|
|
|
|
|
|
NOTE |
|
|
Model |
42LK43** |
42/47/55LV35** |
yyUse the screws that are listed on the |
||
|
37/42/47LK45** |
42/47/55LW45** |
|||
|
VESA standard screw specifications. |
||||
|
42/47LK53** |
55LK53** |
|||
|
37LV35** |
|
yyThe wall mount kit includes an installation |
||
|
47LK95** |
|
manual and necessary parts. |
||
VESA (A x B) |
200 x 200 |
400 x 400 |
|||
yyThe length of screws may differ |
|||||
Standard screw |
M6 |
M6 |
|||
depending on the wall mount. Make sure |
|||||
Number of screws |
4 |
4 |
|||
to use the proper length. |
|||||
Wall mount |
LSW200B, |
LSW400B, |
|||
bracket |
LSW200BG |
LSW400BG |
yyFor more information, refer to the manual |
||
|
|
|
supplied with the wall mount bracket. |
<![endif]>ENGLISH
<![endif]>ENGLISH
28 ASSEMBLING AND PREPARING
yyImage shown may differ from your TV. Only Plasma TV
1Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident.
Power Cord Holder
2Gather and bind the cables with the Cable Holder.
Only 26LV30**
1After connecting the cables as necessary, install Cable Holder as shown and bundle the cables.
Cable holder
Only 26/32LK33**, 32/42LK43**, 32/37/42/47LK45**, 42/47/55LK53**, 47LK95**
Cable Holder
Caution
yyDo not move the TV by holding the Cable Holder & Power Cord Holder, as the Cable holders may break, and injuries and damage to the TV may occur.
Only 22LK33**, 19/22/26LV25**, 22/26LV55**
1After connecting the cables as necessary, install Cable Holder as shown and bundle the cables.
1Gather and bind the cables with the cable management clip.
2 Fix the cable management clip firmly to the TV.
Cable Management Clip
NOTE
yyDo not move the TV by holding the cable management clip, as the cable management clip may break, and injuries and damage to the TV may occur.
Cable Holder
|
|
|
|
ASSEMBLING AND PREPARING 29 |
||
Only 32LV25**, 32/37/42/47/55LV35**, 32LV30**, |
Connection of TV |
|
||||
32/42LV34**, 32/42/47/55LW45**, 32/42LV33** |
yyImage shown may differ from your TV. |
|||||
|
|
|
|
|||
1 Gather and bind the cables with the Cable |
Only 19/22/26LV25**, 22/26LV55**, 26LV30** |
|||||
Holder on the TV back cover. |
||||||
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC Adapter |
|
|
1 |
Connect the antenna cable to the antenna |
|
|
|
input port on the TV. |
or |
Cable Holder |
2 |
Connect the DC adapter plug to the power |
|
|||
|
|
input jack on the TV. |
|
|
|
|
|
|
|
3 |
Connect the power cord to the DC adapter first, |
|
|
|
then plug the power cord into the wall power |
|
|
|
outlet. |
Cable Holder
Only 42/47LW54**
1Gather and bind the cables with the Cable Holder on the TV back cover.
<![endif]>ENGLISH
Cable Holder
<![endif]>ENGLISH
30 REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and
ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
Caution
yyDo not mix old and new batteries, as this may damage the remote control.
yyImage shown may differ from your TV.
yyIn Analogue TV and in some countries, some remote control keys may not work.
ENERGY |
AV MODE |
INPUT |
|
|
TV/ |
|
|
RAD |
SAVING |
|
|
1 2 3
4 5 6
7 8 9
LIST 0 Q.VIEW
MARK
ENERGY AV MODE |
INPUT |
TV/
RAD
(POWER)
Turns the TV on or off.
ENERGY SAVING (See p.67)
Adjusts the brightness of the screen to reduce energy consumption
AV MODE (See p.46) Selects an AV mode
INPUT (See p.46)
Changes the input source; Turns the TV on.
TV/RAD
Selects Radio, TV and DTV programme.
SAVING
1 2 3
4 5 6
7 8 9
LIST 0 Q.VIEW
MARK
Number buttons
Enters numbers.
LIST (See p.39)
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
FAV