LG 55EG910V Owner’s Manual [tr]

www.lg.com
Please read this manual carefully before operating your set and retain it for future reference.
*MFL68823615*
OWNER’S MANUAL
EG96** EF95**
P/NO : MFL68823615 (1510-REV05)
Printed in Korea
ENGLISH
ENGLISH
2
TABLE OF CONTENTS
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE INFORMATION
4 EXTERNAL CONTROL
DEVICE SETUP
5 SAFETY INSTRUCTIONS
14 - Viewing 3D Imaging
(Only 3D models)
16 INSTALLATION
PROCEDURE
17 ASSEMBLING AND
PREPARING
17 Unpacking 20 Separate purchase 21 Parts and buttons 23 - Using the joystick button 24 Lifting and moving the TV 25 Setting up the TV 25 - Attaching the stand 33 Mounting on a table 34 Mounting on a wall 36 Tidying cables
38 Satellite dish connection 39 HDMI connection 41 DVI to HDMI connection 42 Component connection 43 Composite connection 44 Headphone connection 44 Audio connection 44 - Digital optical audio connection 45 USB connection 46 CI module connection 47 Euro scart connection
48 MAGIC REMOTE
FUNCTIONS
50 Registering magic remote 50 How to use magic remote 51 Precautions to Take when Using
the Magic Remote
51 USING THE USER GUIDE
52 MAINTENANCE
52 Cleaning your TV 52 - Screen, frame, cabinet and stand 52 - Power cord
53 TROUBLESHOOTING
54 SPECIFICATIONS
37 MAKING CONNECTIONS
38 Antenna connection
57 REGULATORY
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION
ENGLISH
ENGLISH
WARNING
If you ignore the warning message, you may be seriously injured or there is a
possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product
may be damaged.
NOTE
The note helps you understand and use the product safely. Please read the note
carefully before using the product.
LICENSES
Supported licenses may dier by model. For more information about licenses, visit www.lg.com.
3
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, ship­ping, and handling) upon email request to opensource@lge.com. This oer is valid for three (3) years from the date on which you purchased the product.
ENGLISH
4
EXTERNAL CONTROL DEVICE SETUP
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com.
ENGLISH
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
5
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and/or remote control in the following
environments:
A location exposed to direct sunlight
-
An area with high humidity such as a bathroom
-
Near any heat source such as stoves and other devices that
-
produce heat Near kitchen counters or humidifiers where they can easily
-
be exposed to steam or oil An area exposed to rain or wind
-
Near containers of water such as vases
-
Otherwise, this may result in re, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
This may cause a fire hazard.
Mains Plug is the TV connecting/disconnecting device to AC
mains electric supply. This plug must remain readily attached and operable when TV is in use.
Do not touch the power plug with wet hands. Additionally, if
the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture.
Make sure to connect Mains cable to compliant AC mains
socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
Insert power cable plug completely into wall socket otherwise if
not secured completely into socket, fire ignition may break out.
ENGLISH
Desiccant
6
SAFETY INSTRUCTIONS
Ensure the power cord does not come into contact with hot
objects such as a heater. This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power
cables. Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to
prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock.
When mounting TV onto wall make sure to neatly install and
isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard.
Do not plug too many electrical devices into a single multiple
electrical outlet. Otherwise, this may result in fire due to over-heating.
Do not drop the product or let it fall over when connecting
external devices. Otherwise, this may result in injury or damage to the product.
Keep the anti-moisture packing material or vinyl packing out of
the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to ensure that a small child
does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries.
ENGLISH
SAFETY INSTRUCTIONS
Do not insert any metal objects/conductors (like a metal
chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model)
Do not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
Do not drop metallic objects such as coins, hair pins, chopsticks
or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable
substance (thinner or benzene). Fire or electric shock accident can occur.
Do not allow any impact, shock or any objects to fall into the
unit, and do not drop anything onto the screen. You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or
lighting storm. You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open
the windows and ventilate. It may cause a fire or a burn by a spark.
7
Do not disassemble, repair or modify the product at your own
discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.
ENGLISH
8
SAFETY INSTRUCTIONS
If any of the following occur, unplug the product immediately
and contact your local service centre.
The product has been impacted by shock
-
The product has been damaged
-
Foreign objects have entered the product
-
The product produced smoke or a strange smell
-
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket if you do not intend to
use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.
If water enters or comes into contact with TV, AC adapter or
power cord please disconnect the power cord and contact service centre immediately. Otherwise, this may result in electrice shock or fire.
Only use an authorized AC adapter and power cord approved
by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Never Disassemble the AC adapter or power cord. This may
result in fire or electric shock.
ENGLISH
CAUTION
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
There should be enough distance between an outside antenna
and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock.
Do not install the product on places such as unstable shelves or
inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
If you install the TV on a stand, you need to take actions to
prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
9
If you intend to mount the product to a wall, attach standard mounting interface
(optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
When installing the antenna, consult with a qualified service
technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.
We recommend that you maintain a distance of at least 2 to 7
times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
ENGLISH
10
SAFETY INSTRUCTIONS
Batteries should not be exposed to excessive heat. For example, keep away
from direct sunlight, open fireplace and electric heaters .
Do not place non-rechargeable batteries in charging device.
Make sure there are no objects between the remote control
and its sensor.
Signal from Remote Control can be interrupted due to
external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area.
When connecting external devices such as video game
consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.
Do not turn the product On/Off by plugging-in or unplugging
the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent
the product from overheating.
The distance between the product and the wall should be
-
more than 10cm. Do not install the product in a place with no ventilation
-
(e.g., on a bookshelf or in a cupboard). Do not install the product on a carpet or cushion.
-
Make sure the air vent is not blocked by a tablecloth or
-
curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when
watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
ENGLISH
SAFETY INSTRUCTIONS
Periodically examine the cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp
object such as nail, pencil or pen, or make a scratch on it, as it may causedamage to screen.
Avoid touching the screen or holding your finger(s) against it for
long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.
11
When cleaning the product and its components, unplug the
power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected
from the AC power source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it, by
pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.
ENGLISH
12
SAFETY INSTRUCTIONS
When moving the product, make sure you turn the power off
first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
When moving or unpacking the product, work in pairs because
the product is heavy. Otherwise, this may result in injury.
Contact the service centre once a year to clean the internal
parts of the product. Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
If the product feels cold to the touch, there may be a small
“flicker” when it is turned on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution
of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (white, red, blue or green) at a size of 1ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.
You may find different brightness and colour of the panel
depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
ENGLISH
SAFETY INSTRUCTIONS
Displaying a still image for a prolonged period of time may cause image sticking.
Avoid displaying a fixed image on the TV screen for a long period of time.
Generated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.
Do not use high voltage electrical goods near the TV (e.g. electric mosquito-swatter).
This may result in product malfunction.
13
ENGLISH
14
SAFETY INSTRUCTIONS
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
Viewing Time
When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D
-
contents for a long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
Some users may experience a seizure or other abnormal symptoms when they are
exposed to a flashing light or particular pattern from 3D contents.
Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic
illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.
3D Contents are not recommended to those who suffer from stereo blindness or
stereo anomaly. Double images or discomfort in viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.
If your eyesight varies between your right and left eye, revise your eyesight prior
to watching 3D contents.
Symptoms which require discontinuation or refraining from watching 3D contents
Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or
drinking.
When these symptoms are experienced, stop using/watching 3D contents and
get enough rest until the symptom subsides.
Consult your doctor when the symptoms persist. Symptoms may include
-
headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
ENGLISH
CAUTION
SAFETY INSTRUCTIONS
15
Viewing Environment
Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
Infants/Children
Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
-
Children under the age of 10 may overreact and become overly excited because
-
their vision is in development (for example: trying to touch the screen or trying to jump into it.) Special monitoring and extra attention is required for children watching 3D contents. Children have greater binocular disparity of 3D presentations than adults because
-
the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.
Teenagers
Teenagers under the age of 19 may react with sensitivity due to stimulation from
-
light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
Elderly
The elderly may perceive less 3D effect compared to the youth. Do not sit closer
-
to the TV than the recommended distance.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos
properly.
Do not use 3D glasses instead of your normal glasses, sunglasses or protective
goggles.
Using modified 3D glasses may cause eye strain or image distortion. Do not keep your 3D glasses in extremely high or low temperatures. It will cause
deformation.
The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of
cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.
ENGLISH
16
INSTALLATION PROCEDURE
NOTE
Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this
manual.
The available menus and options may differ from the input source or product
model that you are using.
New features may be added to this TV in the future. The TV can be placed in standby mode in order to reduce the power
consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network
functions only when the network connection is made.
* If the TV is turned on for the first time after it was shipped from the factory,
initialization of the TV may take a few minutes.
ENGLISH
ASSEMBLING AND PREPARING
<
17
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may dier from the actual product and item.
CAUTION
Do not use any unapproved items to ensure the safety and product life span. Any damages or injuries by using unapproved items are not covered by the
warranty.
Some models have a thin film attached on to the screen and this must not be
removed.
NOTE
The items supplied with your product may vary depending on the model. Product specifications or contents of this manual may be changed without
prior notice due to upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels
less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
*A < 10 mm
18 mm
*B
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a
connection error may occur. (Recommended HDMI Cable Types)
- High-Speed HDMI ® / ™Cable (3m or less)
- High-Speed HDMI® / ™ Cable with Ethernet (3m or less)
ENGLISH
18
ASSEMBLING AND PREPARING
Magic remote, Batteries (AA)
(See p. 48)
Component gender cable
(See p. 42)
Owner’s manual Cinema 3D
glasses
The number of 3D glasses may dier depending on the model or country.
Composite gender cable
(See p. 42, 43)
Scart gender cable
(Depending on model) (See p. 47)
Cable Holder
(See p. 36)
Stand Screw
4 EA, M4 x L20 (Only 55EG91**) 5 EA, M4 x L20 (Only 55EG92**, 55EG96**) 8 EA, M4 x L20 (Only 65EG96**) (See p. 25, 27,
28)
Stand Screw
5 EA, M4 x L14 (Only 55EF95**) 8 EA, M4 x L14 (Only 65EF95**) (See p. 30, 31)
Stand assy (Stand body / Stand base)
(Only 55EG91**) (See p. 25)
Stand assy (Stand body / Stand base)
(Only 55EG92**) (See p. 26)
Stand assy (Stand body / Stand base)
(Only 55EG96**) (See p. 26)
ENGLISH
ASSEMBLING AND PREPARING
19
Stand assy (Stand body / Stand base)
(Only 65EG96**) (See p. 28)
Stand assy (Stand body / Stand base)
(Only 55EF95**) (See p. 29)
Stand assy (Stand body / Stand base)
(Only 65EF95**) (See p. 31)
ENGLISH
20
ASSEMBLING AND PREPARING
Separate purchase
Separate purchase items can be changed or modied for quality improvement with­out any notication. Contact your dealer to buy these items. These devices only work with certain models.
AG-F***
Cinema 3D Glasses
LG Audio Device
Compatibility
AG-F***
Cinema 3D Glasses
AN-MR600
Magic Remote
AN-VC550
Smart Camera
AN-MR600
Magic Remote
AN-VC550
Smart Camera
EG91**, EG92**, EG96**, EF95**
AG-F***DP
Dual Play Glasses
AG-F***DP
Dual Play Glasses
LG Audio Device
The model name or design may be changed depending on the upgrade of prod­uct functions, manufacturer’s circumstances or policies.
ENGLISH
Parts and buttons
ASSEMBLING AND PREPARING
21
Joystick Button
Speakers
2
Remote Control Sensor
Intelligent Sensor (Depending on model)
Standby Light
Screen
B type : EG92**A type : EG91**
Joystick Button
1
Speakers
2
Remote Control Sensor
Intelligent Sensor (Depending on model)
Standby Light
Screen
1
ENGLISH
22
ASSEMBLING AND PREPARING
C type : EG96** D type : EF95**
Screen
Speakers
Joystick Button
2
Remote Control
Joystick Button
Sensor Intelligent Sensor
1
(Depending on model)
LG Logo Light
Speakers
2
Remote Control Sensor
Intelligent Sensor (Depending on model)
LG Logo Light
Screen
1
1 Intelligent sensor - Adjusts the image quality and brightness based on the
surrounding environment. (Depending on model)
2 Joystick Button - This button is located below the TV screen.
NOTE
You can set the LG Logo Light or Standby Light to on or off by selecting
GENERAL in the main menus. (Depending on model)
ENGLISH
Using the joystick button
ASSEMBLING AND PREPARING
23
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
When the TV is turned o, place your nger on
Power On
Power O
Volume Control
Programmes Control
the joystick button and press it once and release it.
When the TV is turned on, place your nger on the joystick button and press it once for a few seconds and release it. All running apps will close, and any recording in progress will stop.
If you place your nger over the joystick but­ton and move it left or right, you can adjust the volume level you want.
If you place your nger over the joystick button and move it up or down, you can scrolls through the saved programmes you want.
NOTE
• When your nger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button rst, you may not be able to adjust the volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time. You can adjust the Menu items moving the joystick button up, down, left or right.
Turns the power o.
Clears on-screen displays and returns to TV viewing. Changes the input source. Accesses the Quick Settings.
ENGLISH
24
ASSEMBLING AND PREPARING
Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
Avoid touching the screen at all
times, as this may result in damage to the screen.
It is recommended to move the TV in
the box or packing material that the TV originally came in.
Before moving or lifting the TV,
disconnect the power cord and all cables.
When holding the TV, the screen
should face away from you to avoid damage.
Hold the top and bottom of the TV
frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
When transporting a large TV, there
should be at least 2 people.
When transporting the TV by hand,
hold the TV as shown in the following illustration.
When transporting the TV, do not
expose the TV to jolts or excessive vibration.
When transporting the TV, keep the
TV upright, never turn the TV on its side or tilt towards the left or right.
Do not apply excessive pressure
to cause flexing/bending of frame chassis as it may damage screen.
Be sure to keep your TV upright
instead of laying or tilting it while moving the TV.
When handling the TV, be careful not
to damage the protruding joystick button.
ENGLISH
ASSEMBLING AND PREPARING
25
Setting up the TV
Image shown may dier from your TV.
Attaching the stand
55EG91**
1
Protective package
1
1
Stand cover
1 When assembling the stand, lay
the front screen Protective package included in the product box on a table or product box and then place the TV screen face down on the Protective package.
2
Stand assy
3
CAUTION
Do not lift your TV without the
stand. The protruding Joystick But­ton may be damaged.
M4 x L20 4 EA
ENGLISH
26
ASSEMBLING AND PREPARING
4
Stand cover
CAUTION
Insert the protruding parts of the
Stand cover into the holes.
5
CAUTION
Insert the Cover holder of the Stand
cover into the holes until it clicks. Press the Stand cover gently so that the non-woven fabric inside is at­tached tightly.
55EG92**, 55EG96**
1
Protective package
1
1
Stand cover
Cover holder
Stand cover
1 When assembling the stand, lay
the front screen Protective package included in the product box on a table or product box and then place the TV screen face down on the Protective package.
CAUTION
Do not lift your TV without the
stand. The protruding Joystick Button may be damaged.
ENGLISH
ASSEMBLING AND PREPARING
27
2
Stand assy
4
Stand cover
CAUTION
3
Insert the protruding parts of the
Stand cover into the holes.
5
Stand cover
M4 x L20 5 EA
Cover holder
ENGLISH
28
ASSEMBLING AND PREPARING
CAUTION
Insert the Cover holder of the
Stand cover into the holes until it clicks. Press the Stand cover gen­tly so that the non-woven fabric inside is attached tightly.
65EG96**
1
Protective package
1
1
Stand cover
2
Stand assy
3
1 When assembling the stand, lay
the front screen Protective package included in the product box on a table or product box and then place the TV screen face down on the Protective package.
CAUTION
Do not lift your TV without the
stand. The protruding Joystick But­ton may be damaged.
M4 x L20 8 EA
ENGLISH
ASSEMBLING AND PREPARING
29
4
Stand cover
CAUTION
Insert the protruding parts of the
Stand cover into the holes.
5
CAUTION
Insert the Cover holder of the
Stand cover into the holes until it clicks. Press the Stand cover gen­tly so that the non-woven fabric inside is attached tightly.
55EF95**
1
Stand cover
Cover holder
Stand cover
CAUTION
Do not lift your TV without the
stand. The protruding Joystick But­ton may be damaged.
Use a flat tool to remove the Stand
cover.
ENGLISH
30
ASSEMBLING AND PREPARING
2
Stand assy
4
Stand cover
CAUTION
Insert the protruding parts of the
Stand cover into the holes.
3
5
Stand cover
M4 x L14 5 EA
Cover holder
Loading...
+ 102 hidden pages