LG 55EC9300, 77EG9700 Owners Manual
OWNER’S MANUAL
Please read this manual carefully before operating your
set and retain it for future reference.
55EC9300
77EG9700
*MFL68027932*
www.lg.com
P/NO : MFL68027932 (1506-REV06)
2
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
WARNING
If you ignore the warning message, you may be
seriously injured or there is a possibility of accident
or death.
CAUTION
If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
The note helps you understand and use the product
safely. Please read the note carefully before using
the product.
WARNING
: This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm.
Wash hands after handling.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
3
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION concerning the Power Cord
(Can differ by country):
Check the specification page of this owner’s manual to
be certain. Do not connect too many appliances to the
same AC power outlet as this could result in fire or electric
shock. Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result in
electric shock or fire. Periodically examine the cord of
your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement
part by an authorized service. Protect the power cord
from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point
where the cord exits the appliance. Do not move the TV
with the power cord plugged in. Do not use a damaged
or loose power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the power cord
to unplug the TV.
Warning
- To reduce the risk of fire or electrical shock,
do not expose this product to rain, moisture or other
liquids. Do not touch the TV with wet hands. Do not install
this product near flammable objects such as gasoline or
candles, or expose the TV to direct air conditioning.
ENGLISH
Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on
it.
Do not stick metal objects or any other conductive material
into the power cord. Do not touch the end of the power
cord while it is plugged in.
Keep the packing anti-moisture material or vinyl packing out
of the reach of children. Anti-moisture material is harmful
if swallowed. If swallowed by mistake, force the patient
to vomit and visit the nearest hospital. Additionally, vinyl
packing can cause suffocation. Keep it out of the reach of
children.
Do not expose to dripping or splashing and do not place
objects filled with liquids, such as vases, cups, etc. on or
over the apparatus (e.g. on shelves above the unit).
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire to
prevent possible electric shock (i.e. a TV with a threeprong grounded AC plug must be connected to a threeprong grounded AC outlet). If grounding methods are not
possible, have a qualified electrician install a separate
circuit breaker. Do not try to ground the unit by connecting
it to telephone wires, lightning rods, or gas pipes.
Short-circuit
Breaker
As long as this unit is connected to the AC wall outlet, it
Power Supply
is not disconnected from the AC power source even if the
unit is turned off.
Do not attempt to modify this product in any way without
written authorization from LG Electronics. Unauthorized
modification could void the user’s authority to operate this
product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the precautions
below. An outdoor antenna system should not be located
in the vicinity of overhead power lines or other electric light
or power circuits, or where it can come in contact with
such power lines or circuits as death or serious injury can
occur. Be sure the antenna system is grounded so as to
provide some protection against voltage surges and builtup static charges. Section 810 of the National Electrical
Code (NEC) in the U.S.A. provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna discharge
unit, connection to grounding electrodes and requirements
for the grounding electrode.
Antenna grounding according to the National Electrical
Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Cleaning
When cleaning, unplug the power cord and wipe gently
with a soft cloth to prevent scratching. Do not spray
water or other liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such as alcohol,
thinners or benzine.
Moving
Make sure the product is turned off, unplugged and all
cables have been removed. It may take 2 or more people
to carry larger TVs. Do not press or put stress on the front
panel of the TV.
Ventilation
Install your TV where there is proper ventilation. Do not
install in a confined space such as a bookcase. Do not
cover the product with cloth or other materials while
plugged. Do not install in excessively dusty places.
If you smell smoke or other odors coming from the TV,
unplug the power cord and contact an authorized service
center.
Keep the product away from direct sunlight.
Never touch this apparatus or antenna during a thunder or
lightning storm.
When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the back
of the TV.
Do not allow an impact shock or any objects to fall into the
product, and do not drop anything onto the screen.
DISCONNECTING THE DEVICE FROM THE MAIN POWER
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Batteries
Store the accessories (battery, etc.) in a safe location out of
the reach of children.
This apparatus use batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or allow the batteries to
overheat.
Do not use high voltage electrical equipment near the TV,
(e.g. bug zapper). This may result in product malfunction.
Dot Defect
The Plasma or LCD panel is a high technology product with
resolution of two million to six million pixels. In a very few
cases, you could see fine dots on the screen while you’re
viewing the TV. Those dots are deactivated pixels and do
not affect the performance and reliability of the TV.
IMPORTANT SAFETY INSTRUCTIONS
5
Generated Sound
Cracking noise
or turning off the TV is generated by plastic thermal
contraction due to temperature and humidity. This noise
is common for products where thermal deformation is
required.
Electrical circuit humming/panel buzzing
is generated from a high-speed switching circuit, which
supplies a large amount of current to operate a product. It
varies depending upon the product.
This generated sound does not affect the performance and
reliability of the product.
Take care not to touch the ventilation openings. When
watching the TV for a long period, the ventilation openings
may become hot. This does not affect the performance of
the product or cause defects in the product.
Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause it
to fall.
If the TV feels cold to the touch, there may be a small
flicker when it is turned on. This is normal, there is nothing
wrong with TV. Some minute dot defects may be visible
on the screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on the TV’s
performance. Avoid touching the LCD screen or holding
your finger(s) against it for long periods of time. Doing so
may produce some temporary distortion effects on the
screen.
A cracking noise that occurs when watching
A low level noise
Preventing Image burn or Burn-in on your TV
screen
For USA and Canada
FCC NOTICE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the
receiver.
- Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this
device must accept any interference received, including
interference that may cause undesired operation of the
device.
Any changes or modifications in construction of this device
which are not expressly approved by the party responsible
for compliance could void the user’s authority to operate
the equipment.
ENGLISH
If a fixed image displays on the TV screen for a long period
of time, it will be imprinted and become a permanent
disfigurement on the screen. This is image burn or burn-in
and not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a long period of
time, image burn may occur on the letterboxed area of the
screen.
Avoid displaying a fixed image on the TV screen for a long
period of time (1 or more hours for OLED). to prevent
image burn.
Preventing Screen Burn
Displaying still images, such as a station’s logo, subtitle,
screen menu, video game or computer screen, for a long
time may damage the screen, causing screen burn which
can remain for a long time or never disappear. Do not
display still images for over an hour.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National Electric
Code (U.S.A.). The code provides guidelines for proper
grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building,
as close to the point of the cable entry as practical.
6
IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D Imaging
ENGLISH
WARNING
Viewing Environment
Viewing Time
- When watching 3D contents, take 5 to 15 minute breaks
every hour. Viewing 3D contents for a long period of time
may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or
chronic illness
Some users may experience a seizure or other abnormal
symptoms when they are exposed to a flashing light or
particular pattern from 3D contents.
Do not watch 3D videos if you feel nausea, are pregnant
and/ or have a chronic illness such as epilepsy, cardiac
disorder, or blood pressure disease, etc.
3D Contents are not recommended to those who suffer
from stereo blindness or stereo anomaly. Double images or
discomfort in viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak
eyesight) or astigmatism, you may have trouble sensing
depth and easily feel fatigue due to double images. It is
advised to take frequent breaks than the average adult.
If your eyesight varies between your right and left eye,
correct your eyesight prior to watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
Do not watch 3D contents when you feel fatigue from lack
of sleep, overwork or drinking.
When these symptoms are experienced, stop using/
watching 3D contents and get enough rest until the
symptom subsides.
- Consult your doctor when the symptoms persist.
Symptoms may include headache, eyeball pain, dizziness,
nausea, palpitation, blurriness, discomfort, double image,
visual inconvenience or fatigue.
CAUTION
Viewing Environment
Viewing Distance
- Maintain a distance of at least twice the screen diagonal
length when watching 3D contents. If you feel discomfort
in viewing 3D contents, move further away from the TV.
Viewing Age
Infants / Children
- Usage/ Viewing 3D contents for children under the age of
5 are prohibited.
- Children under the age of 10 may overreact and become
overly excited because their vision is in development (for
example: trying to touch the screen or trying to jump into
it. Special monitoring and extra attention is required for
children watching 3D contents.
- Children have greater binocular disparity of 3D
presentations than adults because the distance between
the eyes is shorter than one of adults. Therefore they will
perceive more stereoscopic depth compared to adults for
the same 3D image.
Teenagers
- Teenagers under the age of 19 may be stimulated to light
coming from 3D videos. Advise them not to watch 3D
videos for a long time when they are tired.
Elderly
- The elderly may perceive less of a 3D effect than the
youth. Do not sit closer to the TV than the recommended
distance.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise, you may not
be able to view 3D videos properly.
Do not use 3D glasses instead of your normal glasses,
sunglasses or protective goggles.
Using modified 3D glasses may cause eye strain or image
distortion.
Do not keep your 3D glasses in extremely high or low
temperatures. It will cause deformation.
The 3D glasses are fragile and are easy to be scratched.
Always use a soft, clean piece of cloth when wiping the
lenses. Do not scratch the lenses of the 3D glasses with
sharp objects or clean/wipe them with chemicals.
LICENSES
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION
7
Supported licenses may differ by model. For more information about licenses, visit
www.lg.com
.
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit
opensource.lge.com
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
the date on which you purchased the product.
.
opensource@lge.com
. This offer is valid for three (3) years from
http://
ENGLISH
8
TABLE OF CONTENTS
TABLE OF CONTENTS
2 IMPORTANT SAFETY INSTRUCTIONS
6 Viewing 3D Imaging
7 LICENSES
7 OPEN SOURCE SOFTWARE NOTICE
8 TABLE OF CONTENTS
9 INSTALLATION PROCEDURE
9 ASSEMBLING AND PREPARING
9 Unpacking
11 Optional Extras
12 Parts and Buttons
13 Using the Joystick Button
ENGLISH
14 Lifting and Moving the TV
14 Setting Up the TV
14 - Attaching the AV Cover
15 - Mounting on a Table
16 - Tidying Cables
16 - Mounting on a Wall
18 - Wall Type Set-up Guide (For 77EG9700)
20 Using Built-In Camera (For 77EG9700)
20 - Preparing Built-In Camera
21 - Name of Parts for the Built-In Camera
21 - Checking the Camera’s Shooting Range
34 MAGIC REMOTE FUNCTIONS
35 Registering Magic Remote
35 How to Use Magic Remote
35 Precautions to Take When Using the Magic Remote
36 USING THE USER GUIDE
INFORMATION
37 SPECIFICATIONS
38 EXTERNAL CONTROL DEVICE SETUP
39 MAINTENANCE
39 Cleaning Your TV
39 - Screen, Frame, Cabinet, and Stand
39 - Power Cord
39 TROUBLESHOOTING
22 MAKING CONNECTIONS
22 Connecting to an Antenna or Cable
23 Connecting to an HD Receiver, DVD Player, or VCR
23 - HDMI Connection
25 - DVI to HDMI Connection
26 - Connecting to a Mobile Phone
27 - Component Connection
28 - Composite Connection
29 Connecting a PC
29 - HDMI Connection or DVI to HDMI Connection
31 Connecting to an Audio System
31 - Digital Optical Audio Connection
32 Connecting Headphones (For 77EG9700)
33 Connecting a USB Device
NOTE
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly
from that shown in this manual.
The available menus and options may differ from the
input source or product model that you are using.
New features may be added to this TV in the future.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
Open the package and make sure all the accessories are included.
1
Connect an external device to the TV set.
2
Make sure the network connection is available.
3
You can use the TV network functions only when the network connection is made.
* When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one
minute.
ASSEMBLING AND PREPARING
Unpacking
9
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased
your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
In case of some model, the thin film on screen is a part of TV, So don’t take it off.
NOTE
The items supplied with your product may vary depending upon the model.
Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick (0.39 inches) and 18 mm (0.7
inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into your TV’s USB port.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types (3 m or less)
- High-Speed HDMI
- High-Speed HDMI®/TM cable with Ethernet
®
/TM cable
B
A
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)
B
A
ENGLISH
10
ASSEMBLING AND PREPARING
ENGLISH
Magic Remote,
Batteries (AA)
(See page 34.)
Cinema 3D Glasses
The number of 3D glasses may
differ depending upon the model or
country.
Composite Video Cable
(See page 27 and 28.)
Owner’s Manual
Cable Holder
(See page 16.)
(For 77EG9700) (For 55EC9300)
AV Cover
(See page 14.)
Polishing cloth
Use this to remove dust from the
cabinet.
(Depending upon model)
Component Video Cable
(See page 27.)
AV Cover
(See page 14.)
HDMI Cable
(Depending upon model)
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING
11
AN-MR500
Magic Remote
AG-F***DP
Dual Play Glasses
AG-F***
Cinema 3D Glasses
LG Audio Device
AN-VC5**
Video Call Camera
(Depending upon model)
ENGLISH
12
ASSEMBLING AND PREPARING
Parts and Buttons
(For 55EC9300)
Front
Screen
Rear
ENGLISH
Speakers
(For 77EG9700)
Screen
Remote Control Sensor and
Intelligent Sensor
1
Front
Built in Camera
LG Logo Light
Joystick button
Joystick button
2
Rear
2
Speakers
Remote Control Sensor and
Intelligent Sensor
1
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2
Joystick button is located behind the screen of TV.
1
LG Logo Light
NOTE
You can set the LG Logo Light to on or off by selecting
GENERAL
in the main menus. (Depending upon model)
Using the Joystick Button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Basic functions
ASSEMBLING AND PREPARING
13
Power On
Power Off
Volume
Control
Channels
Control
When the TV is turned off, place your finger on the joystick button and press it once and
release it.
When the TV is turned on, place your finger on the joystick button and press it once for a
few seconds and release it.
If you place your finger over the joystick button and move it left or right, you can adjust the
volume level you want.
If you place your finger over the joystick button and move it up or down, you can scrolls
through the saved channels you want.
NOTE
When your finger over the joystick button and push it up, down, left, or right, be careful not to press the joystick button. If you
press the joystick button first, you may not be able to adjust the volume level and/or scroll through saved channels.
Adjusting the menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items( , , )moving the joystick button left or right.
TV OFF
CLOSE
INPUT
Turns the power off.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
ENGLISH
14
ASSEMBLING AND PREPARING
Lifting and Moving the TV
When moving or lifting the TV, read the following to prevent the
TV from being scratched or damaged and for safe transportation
regardless of its type and size.
CAUTION
Avoid touching the screen at all times, as this may result
in damage to the screen.
Do not place the product on the floor with its front facing
down. Doing so may result in damage to the screen.
It is recommended to move the TV in the box or packing
material that the TV originally came in.
Before moving or lifting the TV, disconnect the power
cord and all cables.
When holding the TV, the screen should face away from
you to avoid damage.
When transporting a large TV, there should be at least 2
people.
When transporting the TV by hand, hold the TV as shown
in the following illustration.
When transporting the TV, do not expose the TV to jolts or
excessive vibration.
When transporting the TV, keep the TV upright; never turn
the TV on its side or tilt towards the left or right.
Do not apply excessive pressure to cause flexing / bending
of frame chassis as it may damage screen.
Be sure to keep your TV upright instead of laying or tilting it
while moving the TV.
When handling the TV, be careful not to damage the
protruding joystick button.
ENGLISH
Hold the top and bottom of the TV frame firmly. Make
sure not to hold the transparent part, speaker, or speaker
grill area.
Setting Up the TV
Attaching the AV Cover
Please assemble the AV cover as shown in the figure.
(For 55EC9300)
AV Cover
(For 77EG9700)
AV Cover
ASSEMBLING AND PREPARING
10 cm
10 cm
10 cm
10 cm
15
Mounting on a Table
Lift and tilt the TV into its upright position on a table.
1
- Leave a 10 cm (4 inches) (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
(4 inches)
10 cm
10 cm
Securing the TV to a wall (optional)
Insert and tighten the eye-bolts, or TV brackets and bolts on
1
the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove
the bolts first.
Mount the wall brackets with the bolts to
2
Match the location of the wall bracket and the eye-bolts on
the rear of the TV.
Connect the eye-bolts and wall brackets
3
rope or cable.
Make sure to keep the rope parallel to the flat surface.
the wall.
tightly with a sturdy
CAUTION
Make sure that children do not climb on or hang on the
TV.
ENGLISH
Connect the power cord to a wall outlet.
2
CAUTION
Do not place the TV near or on sources of heat, as this
may result in fire or other damage.
NOTE
Use a platform or cabinet that is strong and large enough
to support the TV securely.
Brackets, bolts, and ropes are optional. You can obtain
additional accessories from your local dealer.
16
A
ASSEMBLING AND PREPARING
Tidying Cables
Gather and bind the cables with the cable holder.
(For 55EC9300)
Cable Holder
(For 77EG9700)
ENGLISH
Cable Holder
Mounting on a Wall
An optional wall mount can be used with your LG Television.
Consult with your local dealer for a wall mount used by your TV
model. Carefully attach the wall mount bracket at the rear of the
TV. Install the wall mount bracket on a solid wall perpendicular to
the floor. If you are attaching the TV to other building materials,
please contact qualified personnel to install the wall mount.
Detailed instructions will be included with the wall mount.
10 cm
(4 inches)
10 cm
10 cm
10 cm
Make sure to use screws and wall mounts that meet the
standard. Standard dimensions for the wall mount kits are
described in the following table.
Cable Holder
Cable Holder
CAUTION
Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to the
TV may occur.
Model 55EC9300
A
210
Standard screw M6
Number of screws 2
Wall mount bracket
OSW100
(optional)
Model 77EG9700
VESA (A x B)
A
B
400 x 400
Standard screw M6
Number of screws 4
Wall mount bracket
LSW420BX
(optional)
ASSEMBLING AND PREPARING
17
OSW100
LSW420BX
Removing a stand
(For 55EC9300)
1
2
Wall mount bracket (optional)
Hanger
Screw for attaching
the hanger
CAUTION
Disconnect the power first, and then move or install the
TV. Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall, it may fall
and result in severe injury.
Use an authorized LG wall mount and contact the local
dealer or qualified personnel.
Do not over tighten the screws as this may cause damage
to the TV and void your warranty.
Use the screws and wall mounts that meet the standard.
Any damages or injuries by misuse or using an improper
accessory are not covered by the warranty.
NOTE
Use the screws that are listed on the standard screw
specifications.
The wall mount kit includes an installation manual and
necessary parts.
The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
The length of screws may differ depending upon the wall
mount. Make sure to use the proper length.
For more information, refer to the manual supplied with the
wall mount.
You will need at least two people to remove the stand and one
more to separate the stand from the TV so it doesn’t fall when
the screws are removed.
When removing a stand, lay the TV on its back on a padded
table or surface. Do not put the TV face (front) down on the
table.
ENGLISH
CAUTION
When laying the TV on its back on a padded table or
surface, be careful to prevent the TV from being damaged.
3
NOTE
For more information about mounting on a wall, refer to the
OSW100 manual. (For 55EC9300)
When mounting the TV on a table, attach the stand by
performing the stand removal in reverse.
CAUTION
(When attaching the stand)
Make sure that the screws are fastened tightly. (If they
are not fastened securely enough, the TV may tilt forward
after being installed.)
Do not tighten the screws with too much force; otherwise
they may be damaged and come loose later.
Loading...