PENTOUCH TV SET-UP GUIDE
PENTOUCH TV FAQ
● Image shown may differ from your TV.
1. Preparing
RGB or HDMI
USB dongle
Pentouch TV
PC Touch Pen, CradleCD
3. Restart your computer 4. Check the LED on the Dongle
2. Insert the CD
5. Pen Pairing
50cm
within 30 cm
Red on
(2 seconds)
Green blinks
(3 times)
Recommended System Requirements for Using Pentouch TV
CPU : Dual-Core 2GHz or better
Memory : 1 GB or more
HDD : 500 MB or more
Display : Graphic card with 1024 x 768 via an RGB or HDMI output port
Windows 7 is recommended due to its support of multi-touch.
Supported Operating System
Windows XP 32 bit
Windows Vista: 32 bit, 64 bit
Windows 7 : 32 bit, 64 bit
(Windows 7 Starter Edition is not
supported.)
Frequently Asked Questions
Touchpen is Not Working
※
1.Press “SETTINGS” button
SETTINGS
SETTINGS
Refer to steps 6 through 8
on the previous page
Did you
forget?
SETTINGS
SETTINGS
2. Select PC
Touchpen Pairing is Not Working
Dongle
within 30 cm
over 30 cm away
See this section in OWNER’S MANUAL
Using the Pentouch
Function
See this section in OWNER’S MANUAL
Pairing between
Touch Pen and Dongle
7. Press the Pentouch mode
1.Press “SETTINGS” button
2.Select PC
SETTINGS
SETTINGS
8. Start the Pentouch program 9. Enjoy Pentouch TV
Home
Touch
Screen is Not Working
See this section in OWNER’S MANUAL
6. Display Resolution Setting
Connect TV and PC with RGB or HDMI
“Fn+switch screen”
※
Laptop
LG
Fn+F7 Fn+F4 Fn+F5 Fn+F5
Sony DellAcer
Fn+F7 Fn+F5 Fn+F8 Fn+F7
Samsung
HP
Toshiba
Lenovo
Home
Touch
Home
Touch
How to Charge Touchpen Battery
Charging
USB
USB
port
port
USB
port
USB
port
USB
port
Home
Touch
Screen resolution
Color quality
Stand-by
※
Desktop
Display resolution to
1024 x 768
USB
port
[Cradle] [TouchPen] [Cradle & TouchPen]
Home
Touch
Home
Touch
Home
Touch
USB
port
USB
port
Display Resolution
Settings for Pentouch
See this section in OWNER’S MANUAL
Pairing between
Touch Pen and Dongle
Home
Touch
P/NO : MBM63477005 (1202-REV00)
Printed in Korea