LG 49WFB-N Installation Guide [pt]
Easy Setup Guide
Transparent
Display
ENGLISH
Please read this manual carefully before operating your set and retain it for
future reference.
47WFB
49WFB
55WFB
P/NO : MFL69346102 (1510-REV00)
*MFL69346102*
Printed in Korea
www.lg.com
ENGLISH
2
INSTALLATION PREPARATION
Accessories
Check your product box for the following items. If there are any missing accessories, contact
the local dealer where you purchased your product. The illustrations in this manual may differ
from the actual product and accessories.
Card and book
To view the Owner's Manual
You can view more information about the signage monitors in the owner's manual.
For more information, go to www.lg.com or www.lgecommercial.com. (keyword : WFB)
NOTE
The accessories supplied with your product may vary depending on the model or region.
Product specifications or contents in this manual may be changed without prior notice due
to upgrade of product functions.
This product is used as a built-in product installed inside of an enclosure and cooler.
Long-term storage may cause staining on the extruded aluminum from oxidation.
CAUTION
Do not use any unapproved or counterfeit parts or accessories to ensure the safety and
product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
WARNING
and birth defects or other reproductive harm.
: This product contains chemicals known to the State of California to cause cancer
Wash hands after handling.
Mounting Holes
CAUTION
This product has the front and back sides. Make sure the product is installed with the front
side facing forward.
Image is displayed reversely on the back side.
47WFB
Use M3 screws to mount the monitor. There are 16 screw holes on the rear side of the product.
3
ENGLISH
< Rear side of the product >
ENGLISH
4
49WFB
Use M3 screws to mount the monitor. There are 8 screw holes on the rear side of the product.
< Rear side of the product >
55WFB
Use M3 screws to mount the monitor. There are 8 screw holes on the rear side of the product.
5
ENGLISH
< Rear side of the product >
ENGLISH
6
Storage Method for Panel Protection
Correct Method Incorrect Method
Panel
When laying down the product, place a
cushion or a soft cloth on a flat floor. Put
the product down with the panel of the
product facing down.
Panel
If there is no a cushion or a soft cloth available, ensure the floor is clean. Then lay
the product down carefully with the panel
facing either upward or downward. At this
time, make sure that no object falls on the
panel.
Cushion
Panel
If the product is tilted onto the bezel, the
bottom of the panel may be damaged.
Panel
If the product is tilted onto the edge of the
panel, the panel may be damaged.
PRODUCT INSTALLATION
Lighting installation
This product must be installed with lighting.
Lighting must be installed behind the product so that the display can be seen clearly.
7
ENGLISH
600 lux or more
(When the Full
Screen is White.)
Installing a certain object behind the screen may require additional lighting.
600 lux or more
(When the Full
Screen is White.)
Object
Lighting
Lighting
Additional lighting
Additional lighting
ENGLISH
8
Installation in Enclosure
Install the product in the enclosure. Wear working gloves when installing the product. Do not
use bare hands. Otherwise, it may cause personal injury.
Place the product in the enclosure.
1
Attach the product using the prepared screw holes and an additional enclosure guide
2
frame.
NOTE
This product can be installed in various
locations besides the enclosure.
CAUTION
The panel of this product is so thin
that it can be easily broken when it is
exposed to the outside. Please use the
protective glass to prevent the product
from directly being exposed to the
outside.
When installing the product in its hous-
ing, make sure that the framework of
the product is grounded. (This helps
prevent the product being damaged in
the event of thunder and lightning.)
< Example of the product in the enclosure >
< Example of the lighting installation >
Lighting must be installed in the enclosure.
SPECIFICATIONS
ENGLISH
9
H
W
47WFB
Dimension (W x H x D) 1176.58 mm x 645.02 mm x 11.2 mm
Weight (head) 4.5 kg
55WFB
Dimension (W x H x D) 1331.1 mm x 786.7 mm x 11.2 mm
Weight (head) 6.6 kg
H
W
49WFB
Dimension (W x H x D) 1222.34 mm x 690.8 mm x 11.2 mm
Weight (head) 5.4 kg
D
D
Make sure to read the Safety Precautions
before using the product.
The model and serial numbers of the SET are
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Loading...