OWNER’S MANUAL
Transparent
Display
Please read this manual carefully before operating your set and retain it for future reference.
47WFB
49WFB
55WFB
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
<![endif]>ENGLISH
2
CONTENTS
3 IMPORTANT PRECAUTIONS |
22 TROUBLESHOOTING |
|
|
|
|
3Electrical Power Related Precautions
4Precautions in installing the Product
4Precautions in Moving the Product
5Precautions in Using/Cleaning the Product
5On Disposal (Only, Hg lamp used LCD Monitor)
23 SPECIFICATIONS
26 LVDS PIN MAP GUIDE
6 INSTALLATION PREPARATION
6Accessories
7Mounting Holes
10Portrait Layout
11Storage Method for Panel Protection
11- Correct Method
11- Incorrect Method
12 PRODUCT INSTALLATION
12Installing an LVDS Cable
1347/55WFB LVDS connection
1549WFB LVDS connection
17TSP500-M/TSP510-M LVDS connection
19Lighting Installation
20Installation in Enclosure
21Precaution
21- Correct Method
21- Incorrect Method
NOTE
yyThe warranty will not cover any damages caused by using the product in an excessively dusty environment.
3
Please read these safety precautions carefully before using the product.
WARNING
Failure to follow those warnings may result in death, serious injury or damage to the product or other property.
WARNING
••Indoor Use Only.
WARNING
••Use only the power cord supplied with the unit or another manufacturer's authorized cord.
••Use only a properly grounded plug and receptacle.
••Do not use a damaged or loose plug.
••Operate the display only from a power source(i.e. voltage) indicated in the product specification.
►►Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of
power supply you have, consult a certified electrician.
••In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.
►►It can cause electric shock.
••Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.
►►A fire can break out due to overheating.
••Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord.
►►You may be electrocuted due to excess moisture.
••If you don’t intend to use the product for a long time, unplug the power cable from the product.
••Insert the power plug firm so it cannot come loose.
••Hold the plug when pulling out the power cable. Do not pull the plug out by the wire. Do not bend the power cord with excessive force or put heavy objects on the power cord.
►►The power line can be damaged, which may cause electric shock or fire.
••Do not insert metal or other conductive materials into the product openings. Additionally, do not touch the power cable right after plugging into the wall input terminal.
►►You may be electrocuted.
••The appliance coupler is used as the disconnect device.
••Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.
••Do not unplug the power cord while the product is in use.
►►Electrical shock can damage the product.
••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
<![endif]>ENGLISH
<![endif]>ENGLISH
4
WARNING
••Keep away from heat sources like heaters or open flames.
►►Electrical shock, fire, malfunction or deformation may occur.
••Keep the packing anti-moisture material or vinyl packing out of the reach of children.
►►Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
••Do not put heavy objects on the product on sit upon it.
►►If the product collapses or is dropped, you may be injured. Children must pay particular attention.
••Do not leave the power or signal cable where someone can trip over it.
►►The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
••Install the product in a neat and dry place. Do not use near water.
►►Dust or moisture can cause electrical shock, fire or product damage.
••Do not add accessories that have not been designed for this display.
••If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact LG Customer Service.
►►If you continue to use without taking proper measures, electrical shock or fire can occur.
••If you dropped the product or the case is broken, turn off the product and unplug the power cord.
►►If you continue to use without taking proper measures, electrical shock or fire can occur. Contact LG Customer Service.
••Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product.
►►It can cause injury to humans, problems to the product and damage the display.
••Keep out of reach of children and do not place toys near the product.
••Make sure the product ventilation hole is not blocked. Install the product more than 10cm from the wall.
►►If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-up.
••Do not cover the product with cloth or other material (eg. plastic) while plugged in.
►►The product can be deformed or fire can break out due to internal overheating.
••Place the product on a flat and stable surface that is large enough to support the product.
►►If the product is dropped, you may be injured or the product may be broken.
••Install the product where no Electromagnetic Interference occurs.
••Keep the product away from direct sunlight.
►►The product can be damaged.
••Do not place the product on the floor.
►►Small Children and others may trip over it.
••Do not install this product on a wall if it could be exposed to oil or oil mist.
►►This may damage the product and cause it to fall.
••For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
WARNING
••Make sure to turn off the product.
►►You may be electrocuted or the product can be damaged.
••Make sure to remove all cables before moving the product.
►►You may be electrocuted or the product can be damaged.
••When lifting or moving the product, do not hold it upside down while holding only the stand.
►►This may cause the product to fall resulting in damage or injury.
••Do not shock the product when moving it.
►►You may be electrocuted or the product can be damaged.
••Make sure the panel faces forward and hold it with both hands to move.
►►If you drop the product, the damaged product can cause electric shock or fire.
••Do not place the product face down.
►►This may damage the TFT-LCD screen.
5
WARNING
••Do not attempt to disassemble, repair or modify the product yourself.
►►Fire or electric shock can occur.
►►Contact LG Customer Service for repair.
••When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
••Keep the product away from water.
►►Fire or electric shock accident can occur.
••Avoid high temperatures and humidity.
••Do not put or store flammable substances near the product.
►►There is a danger of explosion or fire.
••Keep the product clean at all times.
••Take a comfortable and natural position when working with the product.
••Take a regular break when working with the product for a long time.
••Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
••Keep proper distance from the product and rest from time-to-time.
►►Your vision may be impaired if you look at the product too closely or for too long.
••Set the appropriate resolution by referring to the User’s Guide.
••Keep small accessories out of the reach of children.
••Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused by long time usage are not covered by the warranty on this product.
••Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)
►►Monitor may have malfunction as its electrical shock.
••Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only. Too much moisture may cause staining.
<![endif]>ENGLISH
••The fluorescent lamp used in this product contains a small amount of mercury.
••Do not dispose of this product with general household waste.
••Disposal of this product must be carried out in accordance to the regulations of your local authority.
<![endif]>ENGLISH
6
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
Card and book
NOTE
yyThe accessories provided with your product may vary depending on the model or region.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
yyLVDS cable is optional and not provided with the product. Please refer to LVDS Pin Map Guide for the LVDS cable assembly.
yyThis product is used as a built-in product installed inside of an enclosure and cooler. yyLong-term storage may cause staining on the extruded aluminum from oxidation.
CAUTION
yyDo not use any unapproved or counterfeit parts or accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty.
7
CAUTION
yyThis product has the front and back sides. Make sure the product is installed with the front side facing forward.
yyImage is displayed reversely on the back side.
47WFB
Use M3 screws to mount the monitor. There are 16 positions for screws on the rear side of the product.
< Front of the product >
<![endif]>ENGLISH
< Rear of the product >
<![endif]>ENGLISH
8
49WFB
Use M3 screws to mount the monitor. There are 8 positions for screws on the rear side of the product.
< Front of the product >
< Rear of the product >
9
55WFB
Use M3 screws to mount the monitor. There are 8 positions for screws on the rear side of the product.
< Front of the product >
< Rear of the product >
<![endif]>ENGLISH