LG 47VL10 Users manual

Order Number

: GETEC-C1-11-053

FCC Part 15 subpart B

Test Report Number

: GETEC-E3-11-014 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: LCD Monitor

FCC ID.: BEJ47VL10

ENGLISH

ENG

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating the your set and retain it for future reference.

MONITOR SIGNAGE MODELS

47VL10

www.lg.com

TABLE OF CONTENTS

ENGLISH

CONTENTS

ENG

3 ASSEMBLING AND PREPAR-

3 Unpacking

4 Separate purchase

5 Parts and buttons

6 Connecting the stand

6 Connecting the Speakers

8 Connecting stand hole cover

8 To install Portrait

9 Installing on a wall

10 REMOTE CONTROL

11 USING THE MONITOR SET

11 Connecting to a PC

11 - HDMI connection

12 - DVI/HDMI connection

12 - RGB connection

ING

25 TROUBLESHOOTING

25 General

28 SPECIFICATIONS

13 CUSTOMIZING SETTINGS

13 Accessing main menus

14 - PICTURE settings

17 - AUDIO settings

18 - TIME settings

19 - OPTION settings

21 - INFORMATION settings

22 MAKING CONNECTIONS

23 Connecting to a HD receiver, DVD or

VCR player

23 - HDMI connection

23 - DVI - HDMI connection

24 - AV connection

24 Connecting to the LAN

24 - LAN connection

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

Remote control and Batteries

Power Cord

D-Sub Signal Cable

ENGLISH

ENG

CD (Owner's Manual) /

Card

ScrewsStand hole cover

CAUTION

Do not use any pirated items to ensure the safety and product life span.

y

Any damages or injuries by using pirated items are not covered by the warranty.

y

NOTE

The accessories supplied with your product may vary depending on the model.

y

Product specifications or contents in this manual may be changed without prior notice due to upgrade

y

of product functions.

ASSEMBLING AND PREPARING

ENGLISH

Separate purchase

ENG

Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories.

Stand Screws

cable management

Speaker

Screws/Cable

Cable holder/

Cable Tie

Stand kit

Speaker kit

NOTE

Cable holder/Cable tie may not be available in some areas or for some models.

y

ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

ENG

Screen Buttons

Screen Marks

Connection panel ( See p.23 to p.24 )

Screen Marks

INPUT Changes the input source.

MENU Accesses the main menus, or saves your input and exits the menus.

 Adjust the up and down.

 Adjusts the volume level.

AUTO/SET

/ I

IR Receiver This is where the unit receives signals from the remote control.

Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display

Auto in progress for optimal display change change resolution.

Turns the power on or off.

is in sleep (Energy Saving) mode, this indicator color changes to amber.

Description

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

You can set the Power indicator to on or off by selecting OPTION in the main menus.

y

ASSEMBLING AND PREPARING

ENGLISH

ENG

Connecting the stand

- Only on some models.

Take the parts for the stand out of the box and

assemble them as shown in the picture.

Stand

cable management

Place a soft cloth on the table and put the

product with the screen facing downward. Connect the stand as shown in the following

picture.

Screws

Connecting the Speakers

- Only on some models.

Mount the product onto the speaker by using

a screw as shown in the following connect the speaker cable.

After installing your speakers, use holders and

cable ties to organize the speaker cables. (This feature is not available in all model.)

Use the screws to secure the stand on the rear

side of the product as shown in the diagram.

NOTE

You can set the Power indicator to on or off

y

by selecting

OPTION in the main menus.

ASSEMBLING AND PREPARING

Cable Management

- Only on some models.

Arrange the cables in the center as shown in

the following picture.

Fit the cable guide to the back to help manage

the cables.

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit

Connect the Kensington security system cable between the Monitor set and a table.

http://www.kensington.com

ENGLISH

ENG

Hold the Cable management with both hands

and pull it downward.

NOTE

Do not use the cable management as a

y

handle for the Monitor. The illustrations in this manual may differ

y

from actual cable interfaces.

NOTE

The Kensington security system is optional.

y

You can obtain additional accessories from most electronics stores.

ASSEMBLING AND PREPARING

Connecting stand hole cover

ENGLISH

ENG

Take the parts for the stand out of the box and

assemble them as shown in the picture.

ScrewsStand hole cover

Place a soft cloth on the table and put the

product with the screen facing downward. Connect the stand hole cover as shown in the following picture.

To install Portrait

- Only on some models.

When installing Portrait, rotate it clockwise based on its front.

NOTE

When using the wall mounting bracket or

y

the portrait scene mode, the opening can be covered by the stand hole cover.

Use the screws to secure the stand hole cover

on the rear side of the product as shown in the diagram.

ASSEMBLING AND PREPARING

Installing on a wall

Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.

10 cm

If you want to mount the monitor on the wall (optional), attach the wall mounting bracket to the rear of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. Use the wall mount plate and screws that comply with the VESA standard as specified below.

784.8 mm (30.9 inch) or less

y

* Thickness of the wall mount plate: 2.6 mm

* Fastening screw: Diameter 4.0 mm x Pitch 0.7

mm x

Length 10 mm

787.4 mm (31.0 inch) or greater

y

* Use the wall mount plate and screws con-

forming to the VESA standard.

CAUTION

Disconnect the power cord first, and then

y

move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or

y

slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may

y

cause damage to the Monitor set and void your warranty. Use the screws and wall mounts that

y

meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

Use the screws that are listed on the VESA

y

standard screw specifications. The wall mount kit includes an installation

y

manual and necessary parts. The wall mount bracket is optional. You can

y

obtain additional accessories from your local dealer. The length of screws may differ depending

y

on the wall mount. Be sure to use the proper length. For more information, refer to the

y

instructions supplied with the wall mount.

ENGLISH

ENG

REMOTE CONTROL

ENGLISH

REMOTE CONTROL

ENG

1. Open the battery compartment cover on the

2. Install two 1.5 V AAA batteries. Don’t mix old or

3. Close cover.

4. To remove the batteries, perform the installation

back side and install the batteries matching correct polarity (+ with +,- with -)

used batteries with new ones.

actions in reverse.

CAUTION

Do not mix old and new batteries, as this

y

may damage the remote control. Make sure to point the remote control to the

y

remote control sensor on the Monitor set.

(POWER)

Turns the Monitor set on or off.

AAA Type

INPUT

Selects the input mode.

AV Button

Toggles through video.

AV -> RGB PC -> HDMI/DVI

Sleep Button

When watching AV, RGB

PC,HDMI/DVI.The product will

be automatically turned off after

a certain period of time.

Press this button repetitively

to select an appropriate time

duration.

PSM Button

Toggles through preset video

settings.

Menu Button

UP and Down buttons

Bring up and down direction

adjustment.

Mute button

ARC button

Aspect Ratio Correction. Toggles through aspect ratio options.

Auto Button

Automatic adjustment function (Operational for the analog signal only)

There is not a function which is supported

Exit Button



Volume up and down.

Check Button

There is not a function which is supported.

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports the Plug & Play* feature and has the built-in speakers with Surround X that reproduces sound clearly with a rich bass.

* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

NOTE

It is recommended to use the Monitor set

y

with the HDMI connection for the best image quality. If you want to use an optional external

y

speaker instead of the built-in speaker, set the Monitor set speaker feature to off.

HDMI connection

Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the Monitor set with an HDMI connection.

ENGLISH

ENG

PC/MAC

Macintosh Adapter (not included)

Back of the product.

NOTE

Use the standard

y

Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)

NOTE

Use a High Speed HDMI™ Cable.

y

Please check the PC environment if you

y

cannot hear the sound in HDMI mode. If you want to use HDMI-PC mode, you must

y

set the input label to PC mode.

USING THE MONITOR SET

DVI/HDMI connection

ENGLISH

ENG

Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the DVI/HDMI cable as shown the following illustrations.

(not included)

RGB connection

Transmits the analog video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the D-sub 15 pin cable as shown the following illustrations.

(not included)

Back of the product.

NOTE NOTE

Use a shielded signal interface cable, such

y

as D-sub 15 pin signal cable and DVI/HDMI cable, with a ferrite core to maintain standard compliance for the product. If you want to use HDMI-PC mode, you must

y

set the input label to PC mode.

CAUTION

Connect the signal

y

input cable and tighten it by turning the screws clockwise.

y

Back of the product.

If you turn the Monitor set on when the set becomes cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear on the screen. This is normal.

CAUTION

Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

CUSTOMIZING SETTINGS

Accessing main menus

Press MENU to access the main menus.

Press the Navigation buttons to scroll to one of the following

menus and press

Press the Navigation buttons to scroll to the setting or option

you want and press

When you are finished, press EXIT.

When you return to the previous menu, press

SET.

EXIT.

ENGLISH

ENG

PICTURE ( See p.14 )

Adjusts the image size, quality, or effect

AUDIO ( See p.17 )

Adjusts the sound quality, effect, or volume level

TIME ( See p.18 )

Sets the time, date or Timer feature

INFORMATION ( See p.21 )

Adjust Set ID and check Serial No. and SW version.

OPTIONPICTURE INFORMATIONAUDIO TIME

OPTION ( See p.19 )

Customizes the general settings

CUSTOMIZING SETTINGS

ENGLISH

PICTURE settings

ENG

The available picture settings are described in the following:

Press MENU to access the main menus.

Press the Navigation buttons to scroll to PICTURE and

press

SET.

Press the Navigation buttons to scroll to the setting or

option you want and press

- To return to the previous level, press

SET.

BACK.

When you are finished, press EXIT.

When you return to the previous menu, press

EXIT.

Setting Description

Picture Mode

Selects one of the preset image or customizes options in each mode for the best Monitor set screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the Monitor set .

Mode

Vivid Adjusts the video image for the retail environment by enhancing the contrast,

brightness, Colour, and sharpness.

Standard Adjusts the image for the normal environment.

Cinema Optimizes the video image for a cinematic look to enjoy movies as if you are in a

movie theater.

Sport Optimizes the video image for high and dynamic actions by emphasizing primary

Colours such as white, grass, or sky blue.

Game Optimizes the video image for a fast gaming screen such as PCs or games.

User 1/2 Adjusts the detailed video image settings for video experts as well as general

viewers.

Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you

decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss.

Contrast Increases or decreases the gradient of the video signal. You may use Contrast

when the bright part of the picture is saturated.

Brightness Adjusts the base level of the signal in the picture. You may use Brightness when

the dark part of the picture is saturated.

Color Adjusts intensity of all Colors.

Sharpness Adjusts the level of clearness in the edges between the light and dark areas of the

picture. The lower the level, the softer the image.

Tint Adjusts the balance between red and green levels.

Expert To compensate for each image mode, or adjust image values according to a

particular image. (Applied only to User2 menu.) (Function works in the following mode - AV, HDMI-DTV)

NOTE

Picture

Picture Mode Color Temperature Advanced Aspect Ratio Picture Reset

Screen

If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema,

y

Sport or Game the subsequent menus will be automatically set. You cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.

y

When the User 1/2 is selected, you can select Backlight, Contrast, Brightness,

y

Color, Sharpness, Tint or

Expert

CUSTOMIZING SETTINGS

Setting Description

Color Temperature

Advanced

Aspect Ratio Changes the image size to view images at its optimal size. ( See p.16 )

Picture Reset Return Picture Mode, Color Temperature, Advanced, Aspect Ratio to the default factory settings.

SCREEN (In RGB, HDMIDTV)

Color Settings

Option

Cool Slightly purplish white.

Medium Slightly bluish white.

Warm Slightly reddish white.

User Select this option to use the user-defined settings.

Gamma (Low/Medium/ High)

Film Mode (On/Off)

Black Level (Low/High)

NR (Off/Low/High/ Adaptive)

Customizes the PC display options in RGB mode.

Option

Auto Config. (RGB PC input only)

Manual Config. If the picture isn't clear after auto adjustment and characters are still trembling,

You can adjust brightness of dark area and middle gray level area of the picture.

» Low: Make dark and middle gray level area of the picture brighter. » Medium: Express original picture levels. » High: Make dark and middle gray level area of the picture darker.

You can watch a cinema-like video by eliminating judder effect. Use this function when you watch movies.

» Low: The picture of the screen gets darker. » High: The picture of the screen gets brighter. » Auto: Realizing the black level of the screen and set it to High or Low

automatically. Set black level of the screen to proper level. This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.

Reduces screen noise without compromising video quality.

This button is for the automatic adjustment of the screen position, clock and

phase. This function is available for analog signals only. * Phase, Clock function are not available in HDMI/DVI DTV.

adjust the picture phase manually. * Phase, Clock function are not available in HDMI/DVI DTV.

ENGLISH

ENG

Phase : To adjust the focus of the display. This item allows you to remove any

horizontal noise and clear or sharpen the image of characters. This function is available for analog signals only.

Clock : To minimize any vertical bars or stripes visible on the screen background.

The horizontal screen size will also change. This function is available for

analog signals only. H-Position : Moving the screen position horizontally. V-Position : Moving the screen position vertically. H-Size : Adjust the horizontal size of the screen. V-Size : Adjust the vertical size of the screen.

XGA Mode (RGB-PC only)

Reset Return Manual config. and XGA Mode to the default factory settings.

For more improved or better picture quality, select the same mode corresponding to computer resolution.

ENGLISH

ENG

Resize the image to view the image at its optimal size by pressing Monitor set.

WATCHING TV

Advanced image options

RATIO while you are watching

- 4:3: The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen.

CAUTION

If a fixed image displays on the screen for a

y

long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio is set to 4:3 for a long

y

period of time, image burn may occur on the letterboxed area of the screen.

NOTE

You can also change the image size by accessing the ARC button of remote control or the main menus.

16:9: The following selection will allow you

to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs).

1:1: The aspect ratio is not adjusted from the

- original.

14:9: You can view a picture format of 14:9 or

a general Monitor set programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right.

Zoom 1,2 : The following selection will allow you

to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

Just Scan: Following Selection will lead to you

view the picture of best quality without loss of original picture in high resolution image.

Note: If there is noise in original Picture, You

can see the noise at the edge.

Original: When your Monitor set receives a wide

screen signal it will automatically change to the picture format broadcast.

NOTE

You can only select 4:3, 16:9 (Wide), 14:9,

y

Zoom in Component mode. You can only select 4:3, Original, 16:9

y

(Wide), 14:9, Zoom in HDMI mode. You can only select 4:3, 16:9 (Wide) in

y

RGB-PC, HDMI-PC mode only. In DTV/HDMI/Component (over 720p) mode,

y

Just Scan is available. You can only select 1:1 in HDMI/ DVI PC,

y

RGB PC mode only.

CUSTOMIZING SETTINGS

AUDIO settings

Press MENU to access the main menus.

Press the Navigation buttons to scroll to AUDIO and press

SET.

Press the Navigation buttons to scroll to the setting or

option you want and press

- To return to the previous level, press

When you are finished, press EXIT.

When you return to the previous menu, press

EXIT.

The available audio options are described in the following:

Setting Description

Sound Mode

Selects one of the preset sound modes or customize each option in each mode.

Mode

Clear Voice By differentiating the human sound range from others,it helps

Standard Select when you want standard-quality sound.

Music Select when you listen to music.

Cinema Select when you watch movies.

Sport Select when you watch sports events.

Game Select when you play games.

User Select this option to use the user-defined audio settings.

SET.

BACK.

users listen to human voices better.

AUDIO

Sound Mode Auto Volume Balance Speaker

ENGLISH

ENG

NOTE

If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amplifier to cope with different user environments.

Auto Volume Activates the Auto Volume feature to keep the volume level consistent whenever you change

Balance Adjusts balance between the left and right speakers according to your room environment.

Speaker Turns on the internal speaker of the Monitor set when using an external Hi-Fi system. You can use

programmes. The volume level may not be consistent due to different signal conditions of broadcasting stations.

the speaker as an audio output device even if there is no video input.

CUSTOMIZING SETTINGS

TIME settings

ENGLISH

ENG

The available time settings are described in the following:

TIME

Press MENU to access the main menus.

Press the Navigation buttons to scroll to TIME and press

SET.

Press the Navigation buttons to scroll to the setting or option

you want and press

- To return to the previous level, press

When you are finished, press EXIT.

When you return to the previous menu, press

Setting Description

Sleep Timer

Auto Sleep If Auto Sleep is active and there is no input signal, the set switches to off mode automatically after

Power On Delay When connecting multiple monitors and turning the power on, the monitors are turned on

Power Saving This screen brightness adjusting menu helps you save energy.

SET.

BACK.

EXIT.

Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn it on again, the Sleep Timer will be set to off.

10 minutes.

individually to prevent overload.

Level: Total 4 screen brightness levels are provided.

- Off: 100% light

- Level 1: 80% light

- Level 2: 60 % light

- Level 3: 40% light

Sleep Timer Auto Sleep Power On Delay Power Saving

CUSTOMIZING SETTINGS

OPTION settings

Press MENU to access the main menus.

OPTION

Language Key Lock

Press the Navigation buttons to scroll to OPTION and press

SET.

Press the Navigation buttons to scroll to the setting or

option you want and press

- To return to the previous level, press

When you are finished, press EXIT.

When you return to the previous menu, press

SET.

BACK.

ISM Method Power Indicator DPM Select Tile Mode Network Setup Factory Reset

EXIT.

The available option settings are described in the following:

Setting Description

Language

Key Lock Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the

ISM Method

Power Indicator Use this function to set the power indicator on the front side of the product to On or Off.

To choose the language in which the control names are displayed.

remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position. In order to unlock it, do the following : Push the MENU button on the remote control and set Key Lock to the 'Off' position.

A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a

ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the

screen for a long period of time.

Mode

Normal Leave on normal if you don't foresee image burn in being a problem.

White wash White wash fills the screen with solid white. This helps removes permanent

images burned into the screen. A permanent image may be impossible to clear entirely with white wash.

Orbiter May help prevent ghost images. However, it is best not to allow any fixed

image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.

Inversion This function inverts the panel color of the screen. The panel color is

automatically inverted every 30 minutes.

Dot Wash This function moves the black dots of the screen. The black dots is

automatically moved every 5 second.

ENGLISH

ENG

DPM Select A user can choose to turn the power saving mode on / off.

ENGLISH

ENG

CUSTOMIZING SETTINGS

Setting Description

Tile Mode To use this function

Network Setup

Factory Reset Select this option to return to the default factory settings.

- Must be displayed with various other products.

- Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved.

- Tile mode : column x row ( c = 1, 2, 3, 4,5 r = 1, 2, 3, 4,5)

- 5 x 5 available.

- Configuration of an integration screen is also available as well as configuration of One by one Display.

Mode

H-Size Adjust the horizontal size of the screen taking into account the size of the

bezel.

V-Size Adjust the vertical size of the screen taking into account the size of the bezel.

H-Position Moving the screen position horizontally.

V-Position Moving the screen position vertically.

Reset Function to initialize and release Tile.

All Tile setting are released when selecting Tile recall and the screen returns to Full screen.

Tile ID Select the location of the Tile by setting an ID.

Natural The image is omitted by the distance between the screens to be naturally

shown.

- DHCP : Allocates and sets up IP automatically.

- Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS. The setup process is complete when you select Execute, and "IP Setup Completed" is displayed at the bottom of the screen. While "Wait for IP Setup" is displayed, you cannot use the local keys and remote control. "Wait for IP Setup" is displayed for up to 40 seconds. * If Network select is set to RS232C.DHCP and Manual are disabled.

CUSTOMIZING SETTINGS

INFORMATION settings

Press MENU to access the main menus.

Press the Navigation buttons to scroll to OPTION and press

SET.

Press the Navigation buttons to scroll to the setting or

option you want and press

- To return to the previous level, press

When you are finished, press EXIT.

When you return to the previous menu, press

EXIT.

The available option settings are described in the following:

Setting Description

Set ID

Serial No. This menu shows the serial number of the product.

SW Version This menu shows the software version.

IP Address Displays a selected network's IP address.

You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program.

SET.

BACK.

INFORMATION

Set ID Serial No. SW Version IP Address MAC Address

ENGLISH

ENG

MAC Address

Displays a selected network's MAC address.

+ 50 hidden pages