LG 42WX30MW-B, 55WX30MW-B, 47WX30MW-B Owner’s Manual

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating the your set and retain it for future reference.

MONITOR SIGNAGE MODELS

42WS50MW 42WX30MW 47WS50MW 47WX30MW 55WX30MW

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 TABLE OF CONTENTS

TABLE OF CONTENTS

	4	LICENSES		24 ENTERTAINMENT
			24		- Connecting to a wired network
	5	ASSEMBLING AND	25		- Network Status
			26		- Connecting USB storage devices
		PREPARING
			27		- Browsing files
	5	Accessories
			29		- Viewing movies
	6	Optional Accessories
			32		- Viewing photos
	7	Parts and buttons
			35		- Listening to music
	8 Using the Mounting Cable Tie
			37		- Viewing the Contents List
	8	Connecting the Speakers
			38		- DivX® VOD Guide
	9	Connecting the stand
			39		- Using PIP/PBP
	9	Using the IR Receiver
	10	Using the Kensington security system		41 CUSTOMIZING SETTINGS
	10	Portrait Layout
	11	Mounting on a wall	41		Accessing Main Menus
	13		42		- PICTURE settings
		REMOTE CONTROL	45		- AUDIO settings
			46		- TIME settings
	15	USING THE MONITOR	47		- OPTION settings
			52		- Picture ID
	15	Connecting to a PC	53		- NETWORK settings
	16	- RGB connection		54 MAKING CONNECTIONS
	16	- DVI-D connection
	17	- HDMI connection	55		External Device Connection
	17	- Display Port connection
			55		- HDMI connection
	18	- IR Receiver connection
			55		- Component connection
	19	Adjusting the screen
			56		- AV(CVBS) connection
	19	- Selecting an image mode
			56		Connecting to a USB
	19	- Customizing image options
			57		Connecting to the LAN
	20	- Customizing PC display options
			58		Daisy Chain Monitors
	20	Adjusting the sound

20- Selecting an sound mode

21- Customizing sound options

21Using additional options

21- Adjusting aspect ratio

23- Using the input list

59 TROUBLESHOOTING

62 SPECIFICATIONS

71 IR CODES

72 CONTROLLING THE MULTIPLE

PRODUCT

72Connecting the cable

72RS-232C Configurations

72Communication Parameter

73Command Reference List

75 Transmission / Receiving Protocol

TABLE OF CONTENTS 3

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 LICENSES

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies To obtain your registration code, locate the DivX VOD section in your device setup menu.

Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

NOTE

yyThe warranty will not cover any damages caused by using the product in an excessively dusty environment.

ASSEMBLING AND PREPARING 5

ASSEMBLING AND PREPARING

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

<![if ! IE]>

<![endif]>ENGLISH

POWER
MONITOR	ENERGY INPUT
ON	OFF
	SAVING
., !	ABC	DEF
GHI	JKL	MNO
PQRS	TUV WXYZ
1/a/A	-*#	CLEAR
	MARK
	ARC
		BRIGHT	P
	PSM		A
		NESS	E
	MUTE
MENU	AUTO	S.MENU
	OK
BACK	TILE	EXIT
ID
ON	OFF

Remote control and Batteries Power Cord IR Receiver

CD(Owner's Manual,	D-sub 15 pin signal cable	Mounting Cable Tie
SuperSign Program/ Manual)
Card

CAUTION

yyDo not use any unapproved or counterfeit parts or accessories to ensure the safety and product life span.

yyAny damages or injuries by using pirated items are not covered by the warranty.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

<![if ! IE]>

<![endif]>ENGLISH

6 ASSEMBLING AND PREPARING

Optional Accessories

Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories.

ST-200T

Stand

Screws

Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm(Included Spring Washer)

Stand kit

SP-2000	Cable holder/
Speaker	Cable Tie

Screws

Diameter 4.0 mm x Pitch 0.7 mm x

Length 8 mm(Included Spring Washer)

Speaker kit

NOTE

yyCable holder/Cable tie may not be available in some areas or for some models. yyOptional accessories are not included for all models.

ASSEMBLING AND PREPARING 7

Parts and buttons

<![if ! IE]>

<![endif]>ENGLISH

Screen Buttons

	Connection panel
Screen Buttons	Description
INPUT	Changes the input source.
MENU	Accesses the main menus, or saves your input and exits the menus.
	Adjust the up and down.
	Adjusts the volume level.
AUTO/SET	Displays the current signal and mode.
	Press this button to adjust the screen automatically (available only in RGB mode)
/ I	Turns the power on or off.

<![if ! IE]>

<![endif]>ENGLISH

8 ASSEMBLING AND PREPARING

Using the Mounting Cable

Tie

First, connect the input signal cable to be used. Insert the cable tie into the bottom hole on the back as shown in the figure to organize cables.

Connecting the Speakers

- Only on some models.

1Connect an input signal cable to use before installing the speakers.

2Mount the speaker by using a screw as shown in the following. Then connect the speaker cable.

3After installing your speakers, use holders and cable ties to organize the speaker cables.

ASSEMBLING AND PREPARING 9

Connecting the stand

- Only on some models.

1Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture.

2Use the screws to secure the stand on the rear side of the product as shown in the diagram.

Using the IR Receiver

This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Install the IR receiver towards the front of the set.

IR Receiver cable

NOTE

yyWhen you see from the back of the set, if the IR receiver cable does not face front, the signal reception range may shorten.

yyThe IR receiver is made with a magnet.It is detachable at the bottom (typical installation) or back (wall installation) of the set.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10 ASSEMBLING AND PREPARING

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor and a table.

Portrait Layout

To install in portrait mode, rotate the set counterclockwise 90 degrees when looking at from the front.

NOTE

yyThe Kensington security system is optional. You can obtain additional accessories from most electronics stores.

ASSEMBLING AND PREPARING 11

Mounting on a wall

CAUTION

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your

dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor using the wall mounting interface (optional parts), attach it carefully so it will not fall.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications.

yyDisconnect the power before installing or moving the monitor. Otherwise electric shock may occur.

yyIf you install the Monitor on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor and void your warranty.

yyUse screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

yyTo prevent injury, this apparatus must be securely attached to the wall in accordance with the instrallation instructions. (This only pertains to Australia and New Zealand.)

NOTE

yyUse screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

5 Please use VESA standard as below.

<![if ! IE]>

<![endif]>ENGLISH

yy785mm or greater

*Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 10 mm

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

Securing the product to a wall (optional)

(Depending on model)

1Insert and tighten the eye-bolts, or product brackets and bolts on the back of the product.

-If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the product.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

CAUTION

WARNING

product is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

»» Using cabinets or stands recommended by the manufacturer of the product.

»» Only using furniture that can safely support the product.

»» Ensuring the product is not overhanging the edge of the supporting furniture.

»» Not placing the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.

»» Not standing the product on cloth or other materials placed between the product and supporting furniture.

»» Educating children about the dangers of climbing on furniture to reach the product or its controls.

sure that children do not climb on or hang on the product.

NOTE

yyUse a platform or cabinet that is strong and large enough to support the product securely.

yyBrackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.

REMOTE CONTROL 13

REMOTE CONTROL

The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

CAUTION

yyDo not mix old and new batteries, as this may damage the remote control.

yyMake sure to point the remote control at the remote control sensor on the Monitor.

<![if ! IE]>

<![endif]>ENGLISH

(POWER)

Turns the Monitor on or off.

MONITOR ON / OFF

Turn off the monitor and then turn it back on.

1/a/A Button

Toggles between numerical and alphabetical.

ARC

Selects the Aspect Ratio Mode.

MARK

Selects a specific file in the USB mode.

Volume Up / Down

Adjusts the volume level.

PSM

Selects the Picture Status Mode.

MUTE

Mutes all sounds.

POWER

MONITOR

ENERGY

INPUT

ENERGY SAVING

Adjusts the brightness of the screen to reduce energy consumption.

INPUT

Selects the input mode.

ON OFF

SAVING

.,!	ABC
GHI	JKL
PQRS	TUV
1/a/A	-*#

DEF

MNO

WXYZ

CLEAR

MARK

ARC

Number and Alphabet buttons

Enters numerical or alphabetical characters depending on the setting.

CLEAR

Deletes the entered numerical or alphabetical character.

PSM	BRIGHT	P
		A
	NESS	G
		E

BRIGHTNESS Key

Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list.

14 REMOTE CONTROL

<![if ! IE]>

<![endif]>ENGLISH

MENU (See p.41)
Accesses the main menus
or saves your input and exit
menus.	AUTO
	Automatically adjusts picture
	position and minimizes image
Navigation buttons	instability.(RGB input only)
Scrolls through menus or
options.

OK		S.MENU
Selects menus or options and		(SuperSign Menu Key)
confirms your input.	OK	The current model does not
		support this function.

BACK

Allows the user to move back one step.

BACK

EXIT

	ID
ON	OFF

EXIT

Clears all on-screen displays and returns to Monitor viewing from any menu.

	TILE
ID ON/OFF	Selects the TILE Mode.
When more than one monitor
is present in the same room,
this allows you to control them	USB Menu control buttons
individually.
	Controls media playback.

USING THE MONITOR 15

USING THE MONITOR

Connecting to a PC

Your Monitor supports the Plug & Play* feature.

* Plug & Play: This is the function that allows a PC to use the monitor without installing a driver.

NOTE

yyIt is recommended to use the Monitor with the HDMI connection for the best image quality.

yyUse a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI cable, with a ferrite core to maintain standard compliance for the product.

yyIf you turn the Monitor on when the set becomes cold, the screen may flicker. This is normal.

yySome red, green, or blue spots may appear on the screen. This is normal.

CAUTION

yyConnect the signal input cable and tighten it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

16 USING THE MONITOR

RGB connection

Transmits the analog video signal from your PC to the Monitor. Connect the PC and the Monitor

set with the 15 pin signal cable as shown the following illustrations.

Select RGB input source on the monitor.

DVI-D connection

Transmits the digital video signal from your PC to the Monitor. Connect the PC and the Monitor

set with the DVI cable as shown the following illustrations.

Select DVI-D input source on the monitor.

Macintosh Adapter

(not included)

(not included)

(not included)
(not included)
DVI OUT	AUDIO OUT

NOTE

yyUse the standard Macintosh adapter since an incompatible adapter

is available in the market. (Different signaling system)

yyApple computers may require an adapter to connect to this monitor. Call or visit their web site for more information.

USING THE MONITOR 17

HDMI connection

Transmits the digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the HDMI cable as shown in the following illustrations.

Select HDMI input source.

Display Port connection

Transmits the digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the Display Port cable as shown in the following illustrations.

Select Display Port input source.

(not included)	(not included)

<![if ! IE]>

<![endif]>ENGLISH

HDMI	DP OUT

NOTE

yyUse a High Speed HDMI™ Cable. yyPlease check the PC environment if you

cannot hear the sound in HDMI mode. Some PCs require you to manually change the default audio output to HDMI.

yyIf you want to use HDMI PC mode, you must set PC/DTV to PC mode.

yyWhen HDMI PC is used, a compatiblity problem might occur.

<![if ! IE]>

<![endif]>ENGLISH

18 USING THE MONITOR

IR Receiver connection

Allows the use of a wired remote or IR receiver extension.

NOTE

yyMake sure the power cable is disconnected.

USING THE MONITOR 19

Adjusting the screen

Selecting an image mode

Display images in its optimized settings by selecting one of the preset image modes.

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to

PICTURE and press OK.

3Press the Navigation buttons to scroll to

Picture Mode and press OK.

4Press the Navigation buttons to scroll to an image mode you want and press OK.

Mode	Description
Vivid	Adjusts the video image for the retail
	environment by enhancing the contrast,
	brightness, color, and sharpness.
Standard	Adjusts the image for a normal
	environment.
Cinema	Optimizes the video image for a cinematic
	look to enjoy movies as if you are in a
	movie theater.
Sport	Optimizes the video image for high and
	dynamic actions by emphasizing primary
	colors such as white, grass, or sky blue.
Game	Optimizes the video image for a fast
	gaming screen such as PCs or games.

5When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Customizing image options

Customize basic and advanced options of each image mode for the best screen performance.

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to

PICTURE and press OK.

3Press the Navigation buttons to scroll to

Picture Mode and press OK.

4Press the Navigation buttons to scroll to an image mode you want and press OK.

5Select and adjust the following options, and then press OK.

Option	Description
Backlight	Adjusts the brightness of the screen
	by controlling the LCD backlight. If
	you decrease the brightness level,
	the screen becomes darker and the
	power consumption will be reduced
	without any video signal loss.
Contrast	Increases or decreases the gradient
	of the video signal. You may use
	Contrast when the bright parts of the
	picture are saturated.
Brightness	Adjusts the base level of the signal in
	the picture. You may use Brightness
	when the dark areas of the picture are
	saturated.
Sharpness	Adjusts the level of crispness in the
	edges between the light and dark
	areas of the picture. The lower the
	level, the softer the image.
Color	Adjusts intensity of all colors.
Tint	Adjusts the balance between red and
	green levels.
Color Temp.	Set to warm to enhance hotter Colors
	such as red, or set to cool to make
	picture bluish.
Advanced	Customizes the advanced options.
Control	Refer to the Advanced image options.
Picture Reset	Restores the options to the default
	setting.

6 When you are finished, press EXIT.

<![if ! IE]>

<![endif]>ENGLISH

When you return to the previous menu, press

BACK.

<![if ! IE]>

<![endif]>ENGLISH

20 USING THE MONITOR

	Customizing PC display options		Adjusting the sound
	Customize options of each image mode for the		Selecting an sound mode
	best image quality.
			This Monitor has 5 preset sound modes to
	yyThis function works in the following mode:
		RGB[PC] mode.	compliment different types of video content.
	1	Press MENU to access the main menus.	1	Press MENU to access the main menus.
	2	Press the Navigation buttons to scroll to	2	Press the Navigation buttons to scroll to
		PICTURE and press OK.		AUDIO and press OK.
	3	Press the Navigation buttons to scroll to	3	Press the Navigation buttons to scroll to Sound
		Screen and press OK.		Mode and press OK.
	4	Select and adjust following options, and then	4	Press the Navigation buttons to scroll to a
		press OK.		sound mode you want and press OK.

Option

Resolution

Auto

Config.

Position/

Size/Phase

Reset

Description

Selects a proper resolution. See “Customizing PC display options”.

Adjusts the screen position, clock, and phase automatically.

The displayed image may be unstable for a few seconds while the configuration is in progress.

Adjusts the options when the picture is not clear, especially when characters are shaky. Run Auto Config. before adjusting these.

Restores the options to the default setting.

5When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Mode	Description
Standard	Select when you want standard-quality
	sound.
Music	Select when you listen to music.
Cinema	Select when you watch movies.
Sport	Select when you watch sport events.
Game	Selects when you play games.

5When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

USING THE MONITOR 21

Customizing sound options

You may customize options of each sound mode for the best sound quality.

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to AUDIO and press OK.

3Press the Navigation buttons to scroll to Sound Mode and press OK.

4Press the Navigation buttons to scroll to a sound mode you want and press OK.

5Select and adjust following options, and then press OK.

Option	Description
Infinite	LG's Infinity Sound option provides 5.1
Sound	channel stereo quality sound from two
	speakers.
Treble	Increases the intensity of the high
	frequency part of audio.
Bass	Increases the intensity of the low
	frequency part of audio.
Reset	Resets the sound mode to the default
	setting.

6When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Using additional options

Adjusting aspect ratio

Resize the image to view the image at its optimal size by pressing ARC while you are watching content.

CAUTION

yyIf a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.

yyIf the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

NOTE

yyYou can also change the image size by accessing the main menus.

yyThe Just Scan mode operates when a video signal has resolution of 720p or higher.

MODE	AV	Component	RGB	Display			DVI-D		HDMI
				Port
ARC			PC	DTV	PC		DTV	PC	DTV	PC
16:9	o	o	o	o		o	o	o	o	o
Just	x	o	x	o		x	o	x	o	x
Scan
1:1	x	x	o	x		o	x	o	x	o
4:3	o	o	o	o		o	o	o	o	o
Zoom	o	o	x	o		x	o	x	o	x
Cinema	o	o	x	o		x	o	x	o	x
Zoom

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

22 USING THE MONITOR

- 16:9 : This selection will allow you to adjust the	- 4:3 : This selection will allow you to view a
picture horizontally, in linear proportion, to fill the	picture with an original 4:3 aspect ratio, black
entire screen(useful for viewing 4:3 formatted	bars will appear on both the left and right of the
DVDs).	screen.

-Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.

-Zoom : This selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

JustScan

- 1:1 : The aspect ratio is not adjusted from the	- Cinema Zoom : Choose Cinema Zoom when
original. (Only Display Port PC, HDMI PC,	you want to enlarge the picture in correct
DVI-D PC, RGB PC)	proportion. Note: When enlarging or reducing
	the picture, the image may become distorted.

Using the input list

Selecting an input source

1Press INPUT to access the input source list.

-The connected device displays on each input source.

2Press the Navigation buttons to scroll to one of the input sources and press OK.

Input source	Description
AV(CVBS)	Watch video from a VCR or other
	external devices.
Component	Watch content from a DVD or other
	external devices, or through a
	digital set-top box
RGB	Views the connected PC display on
	the screen.
Display Port	Watch content from a PC, DVD
	of Digital set-top box other high
	definition devices
DVI-D	Views the connected PC display on
	the screen.
HDMI	Watch content from a PC, DVD
	of Digital set-top box other high
	definition devices
USB	Plays the multimedia file saved in
	the USB.

USING THE MONITOR 23

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

24 ENTERTAINMENT

ENTERTAINMENT

Connecting to a wired network

(Depending on model)

Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings.

This monitor only supports a wired network connection.

After making a physical connection, a small number of home networks may require the display network settings to be adjusted. For most home networks, the display will connect to automatically without any adjustments.

For detail information, contact your internet provider or router manual.

WAN

Router

To set up the network seetings: (Even if your display has already connected automatically, running setup again will not harm anything),

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to NETWORK and press OK.

3Press the Navigation buttons to select Network Setting and press OK.

4If you already set Network Setting, select Resetting. The new connection settings resets the current network settings.

5Select IP Auto Setting or IP Manual Setting.

-If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually.

-IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the display will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined.

6When you are finished, press EXIT.

	@
							ETHERNET
				Cable modem
	Internet

CAUTION

yyDo not connect a modular phone cable to the LAN port.

yySince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.

CAUTION

yyNetwork setting menu will not be available until the display is connected to physical network.

yySince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.

ENTERTAINMENT 25

NOTE

yyIf you want to access the Internet directly on your display, the internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon-

nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions associated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your responsibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to NETWORK and press OK.

3Press the Navigation buttons to select Network Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

	Option	Description
	Setting	Return to the network setting menu.
	Test	Test the current network status after set-
		ting the network.
	Close	Return to the previous menu.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

26 ENTERTAINMENT

Connecting USB storage devices

You can connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features .

Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My media screen appears.

or

CAUTION

yyDo not turn the display off or remove a USB storage device while the EMF(my media) Menu is activated, as this could result in loss of files or damage to the USB storage device.

yyBack up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty.

Tips for using USB storage devices

yyOnly a USB storage device is recognizable. yyIf the USB storage device is connected

through a USB hub, the device is not recognizable.

yyA USB storage device using an automatic recognition programme may not be recognized.

yyA USB storage device which uses its own driver may not be recognized.

yyThe recognition speed of a USB storage device may depend on each device.

yyPlease do not turn off the display or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

yyPlease do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files.

yyPlease use only a USB storage device which was formatted as a FAT32 file system or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized.

yyPlease connect power to a USB storage device(over 0.5 A) which requires an external power supply. If not, the device may not be recognized.

yyPlease connect a USB storage device with the cable offered by the device maker.

yySome USB storage devices may not be supported or operated smoothly.

yyFile alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters.

yyBe sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss.

ENTERTAINMENT 27

yyIf the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source.

-Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.

yyIf your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.

yyIf a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.

yyIf the USB memory device does not work properly, disconnect and reconnect it.

yyHow fast a USB memory device is detected differs from device to device.

yyIf the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the display is turned on.

yyThe recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.

yyAny device with more than the recommended capacity may not work properly.

yyIf a USB external hard disk with a “Energy Saving” function does not work, turn the hard disk off and on again to make it work properly.

yyUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.

yyMaximum of 999 folders or files can be recognized under one folder.

yyIt is recommended to use a certified USB storage device and cable. Otherwise, a USB storage device may not be detected or a playback error may occur.

yyOnly a USB memory stick can be used to play back the files distributed and stored by SuperSign Manager. A USB hard disk or multi-card reader will not work.

yyOnly an FAT 32 file formatted storage device can play back the files distributed and stored by SuperSign manager.

yyA USB 3.0 storage device may not work.

Browsing files

Access the photo, music, or movie lists and browse files.

1Connect a USB storage device.

2Press MENU to access the main menus.

3Press the Navigation buttons to scroll to My Media and press OK.

4Press the Navigation buttons to choose from Movie List, Photo List, Music List or Contents List and press OK.

Movie List		Photo List
				Music List		Contents List

				1		2
Photo List						1/1
USB External				Drive1				Page 1/1	4
001	002	003	004	005	006	007	008	009	5
010	011	012	013	014	015
			Move	View		Page Change		Mark
To Music List		Change Numbers			Mark Mode		Exit
				3
No.					Description

1Moves to upper level folder

2Current page/Total pages

Corresponding buttons on the

3remote control

Current page/ total pages of

4contents under the folder focused on 1

Contents under the folder

5focused on 1

Button

Description

Repeatedly, press the GREEN button to

Green converted to Movie List->Photo List, Photo button List->Music List, Music List->Contents

List or Contents List->Movie List.

Yellow A method to view in 5 large thumbnail button or simple list.

	Blue	Convert to Mark Mode.
	button

<![if ! IE]>

<![endif]>ENGLISH