LG 42WS50BS-B, 47WS50BS-B Owner’s Manual

www.lg.com

OWNER’S MANUAL

MONITOR SIGNAGE

42WS50BS

47WS50BS

55WS50BS

Please read this manual carefully before operating the your set and

retain it for future reference.

MONITOR SIGNAGE MODELS

42WS50MS

47WS50MS

55WS50MS

ENG

ENGLISH

TABLE OF CONTENTS

CONTENTS

4 LICENSES

5 ASSEMBLING AND

PREPARING

5 Accessories

6 Optional Accessories

7 Parts and buttons

8 Using the Mounting Cable Tie

8 Connecting the Speakers

9 Connecting the stand

9 Using the IR Receiver

10 Using the Kensington security system

10 Portrait Layout

11 Connecting the Media Player

12 Mounting on a wall

14 REMOTE CONTROL

16 USING THE MONITOR

16 Connecting to a PC

17 - RGB connection

17 - DVI-D connection

18 - HDMI connection

18 - Display Port connection

19 - IR Receiver connection

20 Adjusting the screen

20 - Selecting an image mode

20 - Customizing image options

21 - Customizing PC display options

21 Adjusting the sound

21 - Selecting an sound mode

22 - Customizing sound options

22 Using additional options

22 - Adjusting aspect ratio

24 - Using the input list

25 ENTERTAINMENT

25 - Connecting to a wired network

26 - Network Status

27 - Connecting USB storage devices

28 - Browsing files

29 - Viewing movies

33 - Viewing photos

36 - Listening to music

38 - Viewing the Contents List

39 - DivX® VOD Guide

40 - Using PIP/PBP

42 CUSTOMIZING SETTINGS

42 Accessing Main Menus

43 - PICTURE settings

46 - AUDIO settings

47 - TIME settings

48 - OPTION settings

53 - Picture ID

54 - NETWORK settings

55 MAKING CONNECTIONS

56 Connecting to a HD receiver, DVD,

Camcorder, Camera, Gaming Device or

VCR player

56 - HDMI connection

56 - Component connection

57 - AV(CVBS) connection

57 Connecting to a USB

58 Connecting to the LAN

58 - LAN connection

59 Daisy Chain Monitors

ENG

ENGLISH

TABLE OF CONTENTS

60 - DVI Cable

60 TROUBLESHOOTING

63 SPECIFICATIONS

72 IR CODES

73 CONTROLLING THE MULTIPLE

PRODUCT

73 Connecting the cable

73 RS-232C Configurations

73 Communication Parameter

74 Command Reference List

76 Transmission / Receiving Protocol

ENGLISH

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the

HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC

in the United States and other countries.

ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an official DivX Certified device that

plays DivX video. Visit divx.com for more information and software tools to

convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX

Certified device must be registered in order to play purchased DivX Video-

on-Demand (VOD) movies. To obtain your registration code, locate the

DivX VOD section in your device setup menu. Go to vod.divx.com for more

information on how to complete your registration.

DivX Certified to play DivX video up to HD 1080p, including premium

content.

DivX , DivX Certified and associated logos are trademarks of Rovi

Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;

7,515,710; 7,519,274

Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are trademarks of Dolby Laboratories.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and accessories.

Do not use any unapproved or counterfeit parts or accessories to ensure the safety and product life

span.

Any damages or injuries by using pirated items are not covered by the warranty.

The accessories supplied with your product may vary depending on the model.

Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

Remote control and Batteries Power Cord IR Receiver

CD (Owner's Manual)/

Card

D-sub 15 pin signal cable Mounting Cable Tie

CAUTION

NOTE

INPUT

ENERGY

SAVING

MARK

ARC

OFF



. , !



ABC



DEF



GHI



JKL



MNO



PQRS



TUV



1/a/A



- * #

WXYZ

CLEAR

MONITOR

PSM

AUTO

MUTE

BRIGHT

NESS

POWER

S.MENU

BACK

TILE

OFF

EXIT

ENG

ENGLISH

ASSEMBLING AND PREPARING

Optional Accessories

Without prior notice, optional accessories are subject to change to improve the performance of the product,

and new accessories may be added. The illustrations in this manual may differ from the actual product and

accessories.

Cable holder/Cable tie may not be available in some areas or for some models.

Optional accessories are not included for all models.

ST-200T

Stand

Screws

: Diameter 4.0 mm x Pitch 0.7 mm x

Length 10 mm(Included Spring Washer)

Cable holder/

Cable Tie

Screws

Diameter 4.0 mm x Pitch 0.7 mm x

Length 8 mm(Included Spring Washer)

SP-2000

Speaker

NOTE

Stand kit

Speaker kit

Media Player kit

CD (Owner's Manual)/

Card

Media Player Screws

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Screen Marks Description

INPUT Changes the input source.

MENU Accesses the main menus, or saves your input and exits the menus.

Adjust the up and down.

Adjusts the volume level.

AUTO/SET Displays the current signal and mode.

Press this button to adjust the screen automatically (available only in RGB mode)

/ I

Turns the power on or off.

Connection panel

Screen Buttons/ Screen Marks

ENG

ENGLISH

ASSEMBLING AND PREPARING

Connecting the Speakers

- Only on some models.

Connect an input signal cable to use before

installing the speakers.

After installing your speakers, use holders and

cable ties to organize the speaker cables.

Mount the speaker by using a screw as shown

in the following. Then connect the speaker

cable.

Using the Mounting Cable

Tie

First, connect the input signal cable to be used.

Insert the cable tie into the bottom hole on the

back as shown in the figure to organize cables.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Use the screws to secure the stand on the rear

side of the product as shown in the diagram.

Connecting the stand

- Only on some models.

Place a soft cloth on the table and put the

product with the screen facing downward.

Connect the stand as shown in the following

picture.

Using the IR Receiver

IR Receiver cable

This allows a remote control sensor to be placed

in a custom location. Then that display can control

other displays via an RS-232C cable. Install the IR

receiver towards the front of the set.

When you see from the back of the set, if

the IR receiver cable does not face front, the

signal reception range may shorten.

The IR receiver is made with a magnet.It is

detachable at the bottom (typical installation)

or back (wall installation) of the set.

Make sure the power cable is disconnected.

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

Portrait Layout

To install in portrait mode, rotate the set

counterclockwise 90 degrees when looking at from

the front.

Using the Kensington

security system

The Kensington security system connector is

located at the back of the Monitor. For more

information of installation and using, refer to the

manual supplied with the Kensington security

system or visit

http://www.kensington.com

Connect the Kensington security system cable

between the Monitor and a table.

The Kensington security system is optional.

You can obtain additional accessories from

most electronics stores.

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

Attach the Media Player on the product using

the four screws provided.

Use the screws provided with the product.

(Diameter 3.0 mm x Pitch 0.5 mm x Length

6.0 mm)

NOTE

Connecting the Media

Player

Place a soft cloth on the table and put the

product with the screen facing downward.

Push the Media Player into the compartment to

mount it.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 10

cm on each side and from the wall. Detailed

installation instructions are available from your

dealer, see the optional Tilt Wall Mounting Bracket

Installation and Setup Guide.

10 cm

If you intend to mount the Monitor to a wall, attach

Wall mounting interface (optional parts) to the back

of the set.

When you install the Monitor using the wall

mounting interface (optional parts), attach it

carefully so it will not fall.

Please, Use the screw and wall mount interface

in accordance with VESA Standards.

If you use screw longer than standard, the

monitor might be damaged internally.

If you use improper screw, the product might

be damaged and drop from mounted position.

In this case, LG Electronics is not responsible

for it.

VESA compatible.

Please use VESA standard as below.

785mm(31 inch) or greater

* Fastening screw: Diameter 6.0 mm x Pitch 1.0

mm x Length 10 mm

Disconnect the power before installing or

moving the monitor. Otherwise electric shock

may occur.

If you install the Monitor on a ceiling or

slanted wall, it may fall and result in severe

injury. Use an authorized LG wall mount

and contact the local dealer or qualified

personnel.

Do not over tighten the screws as this may

cause damage to the Monitor and void your

warranty.

Use screws and wall mounts that meet the

VESA standard. Any damages or injuries by

misuse or using an improper accessory are

not covered by the warranty.

Use screws that are listed on the VESA

standard screw specifications.

The wall mount kit includes an installation

manual and necessary parts.

The wall mount bracket is optional. You can

obtain additional accessories from your local

dealer.

The length of screws may differ depending

on the wall mount. Be sure to use the proper

length.

For more information, refer to the instructions

supplied with the wall mount.

CAUTION

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

Securing the product to a wall (optional)

(Depending on model)

Insert and tighten the eye-bolts, or product

brackets and bolts on the back of the product.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the

eye-bolts on the rear of the product.

Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the

flat surface.

NOTE

Make sure that children do not climb on or

hang on the product.

Use a platform or cabinet that is strong and

large enough to support the product securely.

Brackets, bolts and ropes are optional. You

can obtain additional accessories from your

local dealer.

The illustration shows a general example of

installation and may look different from the

actual product.

CAUTION

If a product is not positioned in a sufficiently

stable location, it can be potentially

hazardous due to falling. Many injuries,

particularly to children, can be avoided by

taking simple precautions such as:

Using cabinets or stands recommended

by the manufacturer of the product.

Only using furniture that can safely

support the product.

Ensuring the product is not overhanging

the edge of the supporting furniture.

Not placing the product on tall furniture

(for example, cupboards or bookcases)

without anchoring both the furniture and

the product to a suitable support.

Not standing the product on cloth or other

materials placed between the product

and supporting furniture.

Educating children about the dangers of

climbing on furniture to reach the product

or its controls.

WARNING

ENG

ENGLISH

REMOTE CONTROL

(POWER)

Turns the Monitor on or off.

MONITOR ON / OFF

Turn off the monitor and then

turn it back on.

1/a/A Button

This button selection is not

applicable.

ENERGY SAVING

Adjusts the brightness of

the screen to reduce energy

consumption.

INPUT

Selects the input mode.

Number and Alphabet buttons

Enters numbers.

The alphabet selection is not

applicable.

CLEAR

This button selection is not

applicable.

PSM

Selects the Picture Status

Mode.

MUTE

Mutes all sounds.

Volume Up / Down

Adjusts the volume level.

BRIGHTNESS Key

Adjust the brightness by

pressing the Up and Down

buttons on the remote control.

In USB mode, the OSD menu

has the Page function to move

to the next file list.

The descriptions in this manual are based on the buttons of the remote control. Please read this manual

carefully and use the Monitor correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the

label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

Do not mix old and new batteries, as this

may damage the remote control.

Make sure to point the remote control at the

remote control sensor on the Monitor.

CAUTION

ARC

Selects the Aspect Ratio

Mode.

MARK

Selects a specific file in the

USB mode.

ENG

ENGLISH

REMOTE CONTROL

S.MENU

(SuperSign Menu Key)

Selects the SuperSign OSD

Menu.(SuperSign input only)

EXIT

Clears all on-screen displays

and returns to Monitor

viewing from any menu.

TILE

Selects the TILE Mode.

MENU (See p.42)

Accesses the main menus

or saves your input and exit

menus.

Navigation buttons

Scrolls through menus or

options.

Selects menus or options and

confirms your input.

BACK

Allows the user to move back

one step.

USB Menu control buttons

Controls media playback.

ID ON/OFF

When more than one monitor

is present in the same room,

this allows you to control them

individually.

AUTO

Automatically adjusts picture

position and minimizes image

instability.(RGB input only)

ENG

ENGLISH

USING THE MONITOR

Connecting to a PC

Your Monitor supports the Plug & Play* feature.

* Plug & Play: This is the function that allows a PC

to use the monitor without installing a driver.

NOTE

Connect the

signal input cable

and tighten it by

turning the screws

clockwise.

Do not press the screen with your finger for

a long time as this may result in temporary

distortion on the screen.

Avoid displaying a fixed image on the screen

for a long period of time to prevent image

burn. Use a screensaver if possible.

When you use wireless equipment near the

product, an image problem might occur.

It is recommended to use the Monitor with

the HDMI connection for the best image

quality.

Use a shielded signal interface cable, such

as D-sub 15 pin signal cable and DVI cable,

with a ferrite core to maintain standard

compliance for the product.

If you turn the Monitor on when the set

becomes cold, the screen may flicker. This

is normal.

Some red, green, or blue spots may appear

on the screen. This is normal.

CAUTION

ENG

ENGLISH

USING THE MONITOR

DVI OUT

AUDIO OUT

DVI-D connection

Transmits the digital video signal from your PC to

the Monitor. Connect the PC and the Monitor

set with the DVI cable as shown the following

illustrations.

Select DVI-D input source on the monitor.

RGB connection

Transmits the analog video signal from your PC to

the Monitor. Connect the PC and the Monitor

set with the 15 pin signal cable as shown the

following illustrations.

Select RGB input source on the monitor.

Apple computers may require an adapter to

connect to this monitor. Call or visit their web

site for more information.

Use the standard

Macintosh adapter since

an incompatible adapter

is available in the market.

(Different signaling system)

NOTE

Macintosh Adapter

(not included)

ENG

ENGLISH

USING THE MONITOR

HDMI

DP OUT

HDMI connection

Transmits the digital video and audio signals from

your PC to the Monitor. Connect the PC and the

Monitor with the HDMI cable as shown in the

following illustrations.

Select HDMI input source.

Display Port connection

Transmits the digital video and audio signals from

your PC to the Monitor. Connect the PC and the

Monitor with the Display Port cable as shown in

the following illustrations.

Select Display Port input source.

Use a High Speed HDMI™ Cable.

Please check the PC environment if you

cannot hear the sound in HDMI mode. Some

PCs require you to manually change the

default audio output to HDMI.

If you want to use HDMI PC mode, you must

set PC/DTV to PC mode.

When HDMI PC is used, a compatiblity

problem might occur.

NOTE

(not included)

ENG

ENGLISH

USING THE MONITOR

IR Receiver connection

Allows the use of a wired remote or IR receiver

extension.

Make sure the power cable is disconnected.

NOTE

ENG

ENGLISH

USING THE MONITOR

Adjusting the screen

Selecting an image mode

Display images in its optimized settings by

selecting one of the preset image modes.

Press MENU to access the main menus.

Press the Navigation buttons to scroll to

PICTURE and press OK.

Press the Navigation buttons to scroll to

Picture Mode and press OK.

Press the Navigation buttons to scroll to an

image mode you want and press OK.

Customizing image options

Customize basic and advanced options of each

image mode for the best screen performance.

Press MENU to access the main menus.

Press the Navigation buttons to scroll to

PICTURE and press OK.

Press the Navigation buttons to scroll to

Picture Mode and press OK.

Press the Navigation buttons to scroll to an

image mode you want and press OK.

Select and adjust the following options, and

then press OK.

Mode Description

Vivid Adjusts the video image for the retail

environment by enhancing the contrast,

brightness, color, and sharpness.

Standard Adjusts the image for a normal

environment.

Cinema Optimizes the video image for a cinematic

look to enjoy movies as if you are in a

movie theater.

Sport Optimizes the video image for high and

dynamic actions by emphasizing primary

colors such as white, grass, or sky blue.

Game Optimizes the video image for a fast

gaming screen such as PCs or games.

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Option Description

Backlight Adjusts the brightness of the screen

by controlling the LCD backlight. If

you decrease the brightness level,

the screen becomes darker and the

power consumption will be reduced

without any video signal loss.

Contrast Increases or decreases the gradient

of the video signal. You may use

Contrast when the bright parts of the

picture are saturated.

Brightness Adjusts the base level of the signal in

the picture. You may use Brightness

when the dark areas of the picture are

saturated.

Sharpness Adjusts the level of crispness in the

edges between the light and dark

areas of the picture. The lower the

level, the softer the image.

Color Adjusts intensity of all colors.

Tint Adjusts the balance between red and

green levels.

Color Temp. Set to warm to enhance hotter Colors

such as red, or set to cool to make

picture bluish.

Advanced

Control

Customizes the advanced options.

Refer to the Advanced image options.

(See p.45)

Picture Reset Restores the options to the default

setting.

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

ENG

ENGLISH

USING THE MONITOR

Customizing PC display options

Customize options of each image mode for the

best image quality.

This function works in the following mode:

RGB[PC] mode.

Press MENU to access the main menus.

Press the Navigation buttons to scroll to

PICTURE and press OK.

Press the Navigation buttons to scroll to

Screen and press OK.

Select and adjust following options, and then

press OK.

Option Description

Resolution Selects a proper resolution. See

“Customizing PC display options”.

Auto

Config.

Adjusts the screen position, clock, and

phase automatically.

The displayed image may be unstable for

a few seconds while the configuration is

in progress.

Position/

Size/Phase

Adjusts the options when the picture is

not clear, especially when characters are

shaky. Run Auto Config. before adjusting

these.

Reset Restores the options to the default

setting.

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Adjusting the sound

Selecting an sound mode

This Monitor has 5 preset sound modes to

compliment different types of video content.

Press MENU to access the main menus.

Press the Navigation buttons to scroll to

AUDIO and press OK.

Press the Navigation buttons to scroll to Sound

Mode and press OK.

Press the Navigation buttons to scroll to a

sound mode you want and press OK.

Mode Description

Standard Select when you want standard-quality

sound.

Music Select when you listen to music.

Cinema Select when you watch movies.

Sport Select when you watch sport events.

Game Selects when you play games.

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

ENG

ENGLISH

USING THE MONITOR

Customizing sound options

You may customize options of each sound mode

for the best sound quality.

Press MENU to access the main menus.

Press the Navigation buttons to scroll to

AUDIO and press OK.

Press the Navigation buttons to scroll to Sound

Mode and press OK.

Press the Navigation buttons to scroll to a

sound mode you want and press OK.

Select and adjust following options, and then

press OK.

Option Description

Infinite

Sound

LG's Infinity Sound option provides 5.1

channel stereo quality sound from two

speakers.

Treble Increases the intensity of the high

frequency part of audio.

Bass Increases the intensity of the low

frequency part of audio.

Reset Resets the sound mode to the default

setting.

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Using additional options

Adjusting aspect ratio

Resize the image to view the image at its optimal

size by pressing ARC while you are watching

content.

If a fixed image displays on the screen for a

long period of time, it will be imprinted and

become a permanent disfigurement on the

screen. This is “image burn” or “burn-in” and

not covered by the warranty.

If the aspect ratio is set to 4:3 for a long

period of time, image burn may occur on the

letterboxed area of the screen.

You can also change the image size by

accessing the main menus.

The Just Scan mode operates when a video

signal has resolution of 720p or higher.

CAUTION

NOTE

MODE

ARC

AV Component RGB Display

Port

DVI-D HDMI Super

-Sign

PC DTV PC DTV PC DTV PC PC

16:9 o o o o o o o o o o

Just

Scan

x o x o x o x o x x

1:1 x x o x o x o x o o

4:3 o o o o o o o o o o

Zoom o o x o x o x o x x

Cinema

Zoom 1

o o x o x o x o x x

ENG

ENGLISH

USING THE MONITOR

- 4:3 : This selection will allow you to view a

picture with an original 4:3 aspect ratio, black

bars will appear on both the left and right of the

screen.

- Zoom : This selection will allow you to view the

picture without any alteration, while filling the

entire screen. However, the top and bottom of

the picture will be cropped.

- Cinema Zoom 1 : Choose Cinema Zoom

when you want to enlarge the picture in correct

proportion. Note: When enlarging or reducing

the picture, the image may become distorted.

- 16:9 : This selection will allow you to adjust the

picture horizontally, in linear proportion, to fill the

entire screen(useful for viewing 4:3 formatted

DVDs).

- Just Scan : This Selection will allow you view

the picture of best quality without loss of original

picture in high resolution image. Note: If there is

noise in original Picture, You can see the noise

at the edge.

- 1:1 : The aspect ratio is not adjusted from the

original. (Only Display Port PC, HDMI PC,

DVI-D PC, RGB PC)

Just Scan

ENG

ENGLISH

USING THE MONITOR

Using the input list

Selecting an input source

Press INPUT to access the input source list.

- The connected device displays on each input

source.

Press the Navigation buttons to scroll to one of

the input sources and press OK.

Input source Description

AV(CVBS) Watch video from a VCR or other

external devices.

Component Watch content from a DVD or other

external devices, or through a

digital set-top box

RGB Views the connected PC display on

the screen.

HDMI Watch content from a PC, DVD

of Digital set-top box other high

definition devices.

DVI-D Views the connected PC display on

the screen.

Display Port Watch content from a PC, DVD

of Digital set-top box other high

definition devices.

SuperSign Views the Media Player display on

the screen.

USB Plays the multimedia file saved in

the USB.

ENG

ENGLISH

ENTERTAINMENT

Connecting to a wired network

(Depending on model)

Connect the display to a local area network (LAN)

via the LAN port as shown on the following illustra-

tion and set up the network settings.

This monitor only supports a wired network con-

nection.

After making a physical connection, a small

number of home networks may require the display

network settings to be adjusted. For most home

networks, the display will connect to automatically

without any adjustments.

For detail information, contact your internet pro-

vider or router manual.

y Do not connect a modular phone cable to the

LAN port.

y Since there are various connection meth-

ods, please follow the specifications of your

telecommunication carrier or internet service

provider.

y Network setting menu will not be available

until the display is connected to physical

network.

y Since there are various connection meth-

ods, please follow the specifications of your

telecommunication carrier or internet service

provider.

To set up the network seetings: (Even if your dis-

play has already connected automatically, running

setup again will not harm anything),

1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to NET-

WORK and press OK.

3 Press the Navigation buttons to select Net-

work Setting and press OK.

4 If you already set Network Setting, select

Resetting. The new connection settings resets

the current network settings.

5 Select IP Auto Setting or IP Manual Setting.

- If selecting IP Manual Setting, press the

Navigation and Number buttons. IP address-

es will need to be input manually.

- IP Auto Setting: Select this if there is a

DHCP server (Router) on the local area net-

work (LAN) via wired connection, the display

will automatically be allocated an IP address.

If you’re using a broadband router or broad-

band modem that has a DHCP (Dynamic

Host Configuration Protocol) server function.

The IP address will automatically be deter-

mined.

6 When you are finished, press EXIT.

Internet

CAUTION

ENG

ENGLISH

ENTERTAINMENT

y If you want to access the Internet directly on

your display, the internet connection should

always be on.

y If you cannot access the Internet, check

the network conditions from a PC on your

network.

y When you use Network Setting, check the

LAN cable or check if DHCP in the router is

turned on.

y If you do not complete the network settings,

the network may not work properly.

Tips for Network setting

y Use a standard LAN cable with this display. Cat5

or better with a RJ45 connector.

y Many network connection problems during set

up can often be fixed by re-setting the router

or modem. After connecting the display to the

home network, quickly power off and/or discon-

nect the power cable of the home network router

or cable modem. Then power on and/or connect

the power cable again.

y Depending on the internet service provider

(ISP), the number of devices that can receive

internet service may be limited by the applicable

y LG is not responsible for any malfunction of the

display and/or the internet connection feature

due to communication errors/malfunctions as-

sociated with your internet connection, or other

connected equipment.

y LG is not responsible for problems within your

internet connection.

y You may experience undesired results if the

network connection speed does not meet the

requirements of the content being accessed.

y Some internet connection operations may not

be possible due to certain restrictions set by the

Internet service provider (ISP) supplying your

Internet connection.

y Any fees charged by an ISP including, without

limitation, connection charges are your respon-

sibility.

y A 10 Base-T or 100 Base-TX LAN port is

required when using a wired connection to this

display. If your internet service does not allow for

such a connection, you will not be able to con-

nect the display.

y A DSL modem is required to use DSL service

and a cable modem is required to use cable

modem service. Depending on the access

method of and subscriber agreement with your

ISP, you may not be able to use the internet

connection feature contained in this display or

you may be limited to the number of devices you

can connect at the same time. (If your ISP limits

sub-scription to one device, this display may

not be allowed to connect when a PC is already

connected.)

y The use of a “Router” may not be allowed or its

usage may be limited depending on the policies

and restrictions of your ISP. For details, contact

your ISP directly.

Network Status

1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to NET-

WORK and press OK.

3 Press the Navigation buttons to select Net-

work Status.

4 Press OK to check the network status.

5 When you are finished, press EXIT.

Option Description

Setting Return to the network setting menu.

Test

Test the current network status after set-

ting the network.

Close Return to the previous menu.

NOTE

ENG

ENGLISH

ENTERTAINMENT

Tips for using USB storage devices

y Only a USB storage device is recognizable.

y If the USB storage device is connected

through a USB hub, the device is not recog-

nizable.

y A USB storage device using an automatic

recognition programme may not be recog-

nized.

y A USB storage device which uses its own

driver may not be recognized.

y The recognition speed of a USB storage

device may depend on each device.

y Please do not turn off the display or unplug

the USB device when the connected USB

storage device is working. When such device

is suddenly separated or unplugged, the

stored files or the USB storage device may

be damaged.

y Please do not connect the USB storage

device which was artificially maneuvered on

the PC. The device may cause the product to

malfunction or fail to be played. Never forget

to use only a USB storage device which has

normal music files, image files or movie files.

y Please use only a USB storage device which

was formatted as a FAT32 file system or

NTFS file system provided with the Win-

dows operating system. In case of a storage

device formatted as a different utility program

which is not supported by Windows, it may

not be recognized.

y Please connect power to a USB storage

device(over 0.5 A) which requires an external

power supply. If not, the device may not be

recognized.

y Please connect a USB storage device with

the cable offered by the device maker.

y Some USB storage devices may not be sup-

ported or operated smoothly.

y File alignment method of USB storage

device is similar to Window XP and filename

can recognize up to 100 English characters.

y Be sure to back up important files since data

stored in a USB memory device may be

damaged. We will not be responsible for any

data loss.

Connecting USB storage devices

You can connect USB storage devices such as

a USB flash memory, external hard drive to the

display and use multimedia features .

Connect a USB flash memory or USB memory

card reader to the Display as shown on the follow-

ing illustration. The My media screen appears.

y Do not turn the display off or remove a USB

storage device while the EMF(my media)

Menu is activated, as this could result in

loss of files or damage to the USB storage

device.

y Back up your files saved on a USB storage

device frequently, as you may lose or dam-

age the files and this may be not covered by

the warranty.

CAUTION

+ 62 hidden pages