LG 42LH40FD, 47LH45YD Owner’s Manual

<![if ! IE]>

<![endif]>ENGLISH

LCD TV

OWNER’S MANUAL

LCD TV MODELS

32LH2*** 42LH9***

37LH2*** 47LH9***

42LH2*** 42SL8***

32LH4*** 55SL8***

37LH4***

42LH4***

47LH4***

55LH4***

Please read this manual carefully before operating your TV.

Retain it for future reference.

Record the model number and serial number of the TV.

Refer to the label on the back cover and quote this information.

To your dealer when requiring any service.

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

■ Image shown may differ from your

This item is not included for all models.

TEXT

T.O

PT

S

UBT

IT

LE

Owner’s Manual	Batteries	Remote Control

Power Cord

Only 32/37/42LH2***, 32/37/42/47/55LH4***

(Except 55LH4***)

Bolts for stand assembly	Protection cover
(Refer to p.8)	(Refer to p.11)

Wall Mounting Bracket(Separate purchase)

RW230 AW-47LG30M

(32LH2	(32/37/42LH2***
***	32/37/42/47LH4*** )
32LH4***)

AW-55LH40M

(55LH4*** )

Polishing Cloth

Polishing cloth for use on the screen.

*Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.

Do not use excessive force. This may cause scratching or discolouration.

(Only 32/37/42LH2***

32/37/42LH4***)

1-screw for stand fixing (Refer to p.9)

<![if ! IE]>

<![endif]>ACCESSORIES

1

CONTENTS

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

	PREPARATION
<![if ! IE]> <![endif]>CONTENTS	Attaching the TV to a desk . . . . . . . . . . . . . . . . .	.9
	Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . .	. 4
	Back Panel Information . . . . . . . . . . . . . . . . . . . . . .	6
	Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .	8
	Back Cover for Wire Arrangement . . . . . . . . . . . .	10
	Not Using the desk-type stand . . . . . . . . . . . . . . .	11
	Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	11
	Kensington Security System . . . . . . . . . . . . . . . . .	11
	Careful installation advice . . . . . . . . . . . . . . . . .	12
	Desktop Pedestal Installation . . . . . . . . . . . . . . .	12
	Wall Mount: Horizontal Installation . . . . . . . . . . . .	13
	Antenna or Cable Connection . . . . . . . . . . . . . . .	14

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . 15

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Digital Audio Out Setup . . . . . . . . . . . . . . . . . . . . 23

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . 24

Usb Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

- Screen Setup for PC Mode . . . . . . . . . . . . . . .30

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Selecting the Programme List . . . . . . . . . . . . . . . . 48 Favourite Programme Setup . . . . . . . . . . . . . . . . . 49 Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 MHEG Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Simple manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Initializing (Reset to original factory settings) . . .57

TO USE A BLUETOOTH

Precautions when using the Bluetooth . . . . . . . . . 58 Setting the Bluetooth . . . . . . . . . . . . . . . . . . . . . . 59 Set TV PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Bluetooth headset

- Connecting a new Bluetooth headset . . . . . . .61 - Connecting to Bluetooth headset already registered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 - Disconnecting the Bluetooth headset during use . . .62 - When requesting to connect to TV from the Bluetooth headset . . . . . . . . . . . . . . . . . . . . . . . .62

Managing Registered Bluetooth device . . . . . . . . 63 My Bluetooth Information. . . . . . . . . . . . . . . . . . . .64 Receiving Photos from external Bluetooth device . . . . .65 Listening to the Musics from external Bluetooth device . . . .65

WATCHING TV / PROGRAMME CONTROL

Remote Control Key Functions . . . . . . . . . . . . . . . 34 Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . .36 Programme Selection . . . . . . . . . . . . . . . . . . . . . . 36 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . 36 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 On-Screen Menus Selection and Adjustment . . . 38 Auto Programme Tuning . . . . . . . . . . . . . . . . . . . . 39 Manual Programme Tuning (In Digital Mode) . . . 40 Manual Programme Tuning (In Analogue Mode) . . . 41 Programme Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Booster (In Digital Mode) . . . . . . . . . . . . . . . . . . . 45 Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . .46

TO USE A USB DEVICE

When connecting a USB device . . . . . . . . . . . . . . 66 Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 DivX Registration Code . . . . . . . . . . . . . . . . . . . . .78 Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

2

EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)
Switch on/off EPG ......................................................	80
Select a Programme....................................................	80
Button Function in NOW/NEXT Guide Mode.......	80
Button Function in 8 Day Guide Mode..................	81
Button Function in Date Change Mode ................	81
Button Function in Extended Description Box.........	82
Button Function in Remind Setting Mode.........................	82
Button Function in Schedule List Mode................	82
PICTURE CONTROL
Picture Size (Aspect Ratio) Control.......................	83
Picture Wizard ...............................................................	85
Energy Saving ................................................................	86
Preset Picture Settings
- Picture Mode-Preset............................................	87
Manual Picture Adjustment
- Picture Mode-User option.................................	88
Picture Improvement Technology...........................	89
Expert Picture Control...............................................	90
Picture Reset.................................................................	93
Power Indicator .............................................................	94
Demo Mode..................................................................	95
Mode Setting.................................................................	96
SOUND & LANGUAGE CONTROL
Auto Volume Leveler...................................................	97
Clear Voice II..................................................................	98
Preset Sound Settings - Sound Mode...................	99
Sound Setting Adjustment -User Mode..............	100
SRS TruSurround XT.................................................	100
Balance.........................................................................	101
TV Speakers On/ Off Setup....................................	102
Selecting Digital Audio Out ....................................	103
Audio Reset..................................................................	104
I/II
- Stereo/Dual Reception (In Analogue Mode
Only).........................................................................	105
- NICAM Reception (In Analogue Mode Only)...	106
- Speaker Sound Output Selection .................	106

Country/Area Selection.................................................	107
Language Selection (In Digital Mode only).......	108
TIME SETTING
Clock Setup ................................................................	109
Auto On/ Off Time Setting.....................................	110
Sleep Timer Setting....................................................	111
PARENTAL CONTROL / RATINGS
Set Password & Lock System..................................	112
Block Programme .......................................................	113
External Input Blocking..............................................	114
Key Lock .......................................................................	115
DIGITAL TELETEXT
Teletext within Digital Service.................................	116
Teletext in Digital Service.........................................	117
APPENDIX
Troubleshooting..........................................................	118
Maintenance ..............................................................	120
Product Specifications .............................................	121
IR Codes ......................................................................	124
External Control Device Setup ..............................	126
Open Source Software Notice...............................	133
Open Source License ...............................................	134

<![if ! IE]>

<![endif]>CONTENTS

3

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

FRONT PANEL CONTROLS

CAUTION

G When the TV cannot be turned on with the remote control, press the main power button on the TV. (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control).

GDo not step on the glass stand or subject it to any impact.

It may break, causing possible injury from fragments of glass, or the TV may fall.

GDo not drag the TV. The floor or the product may be damaged.

■Image shown may differ from your TV.

32/37/42LH2***

Remote Control Sensor

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the TV is switched on.

P	PROGRAMME
	VOLUME
OK	OK
MENU	MENU
INPUT	INPUT
	POWER

Main Power Switch

4

■ Image shown may differ from your TV.

32/37/42/47/55LH4***

PROGRAMME

P

VOLUME

OK

OK

MENU

MENU

INPUT

INPUT

POWER

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to the surrounding conditions.

Power/Standby Indicator

•Illuminates red in standby mode.

•Illuminates blue when the TV is switched on.

OFF ON

Main Power Switch

<![if ! IE]>

<![endif]>PREPARATION

5

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

BACK PANEL INFORMATION

■ Image shown may differ from your TV.

Only 32/37/42LH2***

			1
2	3	4	5
			OPTICAL
			AUDIO OUT
	RGB		(PC)	(CONTROL&SERVICE)
	AUDIO IN		VIDEO	L/MONO AUDIO		<![if ! IE]> <![endif]>AV
					R
	(RGB/DVI)
	/DVI IN
	2
2
1(DVI)	1
			VIDEO	AUDIO
			COMPONENT IN			IN CABLE IN

<![if ! IE]> <![endif]>Only
<![if ! IE]> <![endif]>Service	11
<![if ! IE]> <![endif]>IN 3	2

12

AV IN2

8	9	10
1		7

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

2 HDMI Input

Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

3RGB/DVI Audio Input

Connect the audio from a PC or DTV.

4RGB IN Input

Connect the output from a PC.

5OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.

6RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

Component Input

Connect a component video/audio device to these jacks.

Antenna Input

Connect RF antenna to this jack.

Cable Input

Connect cable signals to this jack.

SERVICE ONLY PORT

Audio/Video Input

Connect audio/video output from an external device to these jacks.

6

Only 32/37/42/47/55LH4***

								11
	1
							<![if ! IE]> <![endif]>IN 3	2
2	3	4	5			7
			OPTICAL
			AUDIO OUT
	RGB		(PC)	(CONTROL&SERVICE)
	AUDIO IN		VIDEO	L/MONO AUDIO		<![if ! IE]> <![endif]>AV
					R
								12
	(RGB/DVI)
	/DVI IN
	2
2
1(DVI)	1						AV IN2
			VIDEO	AUDIO
			COMPONENT IN			IN	CABLE IN
	8					9	10
1					7

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

2 HDMI Input

Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

3RGB/DVI Audio Input

Connect the audio from a PC or DTV.

4RGB IN Input

Connect the output from a PC.

5OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.

6RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

Component Input

Connect a component video/audio device to these jacks.

Antenna Input

Connect RF antenna to this jack.

Cable Input

Connect cable signals to this jack.

USB IN Input

Connect USB storage device to this jack.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

<![if ! IE]>

<![endif]>PREPARATION

7

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

STAND INSTALLATION

■ Image shown may differ from your TV.

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

Only 32/37/42LH2***, 32/37/42/47LH4***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Assemble the TV as shown.

3Fix the 4 bolts securely using the holes in the back of the TV.

8

ATTACHING THE TV TO A DESK

■ Image shown may differ from your TV.

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

Only 32/37/42LH2***, 32/37/42LH4***

<![if ! IE]>

<![endif]>PREPARATION

1-Screw (provided as parts of the product)

Stand

Desk

! WARNING

G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

9

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

<![if ! IE]>

<![endif]>PREPARATION

■ Image shown may differ from your TV.

Only 32/37/42LH2***, 32/37/42/47/55LH4***

1

External Equipment Setup section of the manual.

2	MENT CLIP as

CABLE MANAGEMENT CLIP

3	CABLE MANAGEMENT CLIP as

! NOTE

G Do not hold the CABLE MANAGEMENT CLIP when moving the TV. - If the TV is dropped, you may be injured or the TV may be damaged.

10

NOT USING THE DESK-TYPE STAND

■ Image shown
When installing	use the

Only 32/37/42LH2***,32/37/42/47/55LH4***

Insert the PROTECTION COVER into the TV until clicking sound.

SWIVEL STAND

■This feature is not available for all models.

■After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.

KENSINGTONSECURITYSYSTEM

■This feature is not available for all models.

■Image shown may differ from your TV.

The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.

For further information, contact http://www.kensington.com, the internet homepage of the Kensington

company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.

NOTE

- The Kensington Security System is an optional accessory.

NOTES

a.If the TV feels cold to the touch, there may be a small “flicker” when it is turned on.

This is normal, there is nothing wrong with TV.

b.Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

c.Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary distortion effects on the screen.

<![if ! IE]>

<![endif]>PREPARATION

11

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

CAREFUL INSTALLATION ADVICE

A You should purchase necessary components to fix the TV safety and secure to the wall on the market.

A Position the TV close to the wall to avoid the possibility of it falling when pushed.

A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

1		1
	2	2

1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

3

3Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

GWhen moving the TV undo the cords first.

GUse a platform or cabinet strong and large enough to support the size and weight of the TV.

GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

AThe TV can be installed in various ways such as on a wall, or on a desktop etc.

AThe TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker

DESKTOPPEDESTALINSTALLATION

For adequate ventilation allow a clearance of 4”

(10cm) all around the TV.

4 inches

4 inches

4 inches	4 inches

12

WALL MOUNT: HORIZONTAL INSTALLATION

A We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.

A We recommend that you purchase a wall mounting bracket which supports VESA standard.

A LG recommends that wall mounting be performed by a qualified professional installer

! NOTE

GShould Install wall mount on a solid wall perpendicular to the floor

GShould use a special wall mount, if you want to install it to ceiling or slanted wall.

GThe surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.

GInstalling screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount.

GLG is not liable for any accidents or damage to property or TV due to incorrect installation:

-Where a non-compliant VESA wall mount is used.

-Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.

-Not following the recommended Installation method.

4 inches	4 inches

4 inches

4 inches

4 inches

A

B

Model		VESA	Standard	Quantity
		(A * B)	Screw
42LH2***		200 * 200	M6	4
37LH2***		200 * 200	M6	4
32LH2***		200 * 100	M4	4
55LH4***		400 * 400	M6	4
47LH4***		200 * 200	M6	4
42LH4***		200 * 200	M6	4
37LH4***		200 * 200	M6	4
32LH4***		200 * 100	M4	4

<![if ! IE]>

<![endif]>PREPARATION

13

PREPARATION

■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA OR CABLE CONNECTION

■For optimum picture quality, adjust antenna direction.

■An antenna cable and converter are not supplied.

<![if ! IE]> <![endif]>PREPARATION

	Wall	Multi-family Dwellings/Apartments
		(Connect to wall antenna socket)
	Antenna
	Socket

RF Coaxial Wire (75 ohm)

UHF

Antenna	Signal
	Amplifier
	ANTENNA IN
	VHF

■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.

■If signal needs to be split for two TVs, use an antenna signal splitter for connection.

14

EXTERNAL EQUIPMENT SETUP

■To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

■This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47/55LH4*** models.

■Image shown may differ from your TV.

HD RECEIVER SETUP

■This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

Connecting with a component cable

1

Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the TV.

2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV.

3Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

4Select Component1 input source using the INPUT

If connected to COMPONENT IN 2, select Component2 input source.

2	<![if ! IE]> <![endif]>EXTERNAL
1	<![if ! IE]> <![endif]>SETUPEQUIPMENT
VIDEO	AUDIO
COMPONENT IN

12

Signal

Component

HDMI

480i/576i

O

X

480p/576p

O

O

720p/1080i

O

O

1080p

O

O

(50/60Hz only)

(24Hz/30Hz/50Hz/60Hz)

15

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

Connecting a set-top box with an HDMI cable

	1	Connect the digital set-top box to HDMI/DVI IN 1,
		DMI IN 2 or HDMI IN 3 jack on the TV.

/DVI IN	2
2	Y	PB
1(DVI)	1
		VID
		CO

Refer to the owner’s manual for the digital set-top box.)

Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.

1

! NOTE

G Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI version 1.3,

flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

Connecting with an HDMI to DVI cable

1Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.

output of the digital set-top box to /DVI) jack on the TV.

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

Select HDMI1 input source using the INPUT button on the remote control.

	(RGB/DVI)
/DVI IN
2	2
	Y	PB	PR
1(DVI)	1
		VIDEO
		COMPON
1	2

16

DVD SETUP
Connecting with a component cable
1	Connect the video outputs (Y, PB, PR) of the DVD to the	2
	COMPONENT IN VIDEO jacks on the TV.
	the audio outputs of the DVD to the	1
		VIDEO	AUDIO
	PONENT IN AUDIO jacks on the TV.
		COMPONENT IN

Turn on the DVD player, insert a DVD.

Select Component1 input source using the INPUT button on the remote control.

1

2

Refer to the DVD player's manual for operating instructions.

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV	Y	PB	PR
	Y	PB	PR
Video output ports	Y	B-Y	R-Y
on DVD player	Y	Cb	Cr
	Y	Pb	Pr

17

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

Connecting with a S-Video cable

Connect the S-VIDEO output of the DVD to the S -

1VIDEO input on the TV.

the audio outputs of the DVD to the AUDIO jacks on the TV.

Turn on the DVD player, insert a DVD.

Select AV1 input source using the INPUT button on the remote control.

Refer to the DVD player's manual for operating instructions.

AUDIO IN	VIDEO	L/MONO AUDIO R
RGB/DVI)		<![if ! IE]> <![endif]>IN1AV

2

Y PR L

1
		AUDIO		ANTENNA IN
1		2
S-VIDEO	VIDEO	L	R	ANT IN

OUTPUT				ANT OUT
SWITCH

18

Connecting the HDMI cable

1Connect the HDMI output of the DVD to the HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3jack on the TV.

Refer to the DVD player's manual for operating instructions.

!NOTE

G The TV can receive video and audio signals simultaneously when using a HDMI cable.

G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

G Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

	(RGB/DVI)
/DVI IN	2
2	Y	PB	PR
1(DVI)	1
		VIDEO
		COMPONE

1 EXTERNALEQUIPMENT SETUP

19

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

VCR SETUP

■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.

Connecting with a RF Cable

O AUDIO
<![if ! IE]> <![endif]>1 INAV
R	ANT OUT S-VIDEO VIDEO L R		ANT OUT S-VIDEO VIDEO L R
	1		1
AUDIO	CABLE IN		ANTENNA IN CABLE IN
ANTENNA IN		or
	OUTPUT		OUTPUT
	SWITCH		SWITCH
	Wall Jack		Wall Jack
	2		2
	Antenna		Antenna

1Connect the ANT OUT socket of the VCR to the ANTENNA IN/CABLE IN socket on the TV.

the antenna cable to the ANT IN socket of the VCR.

Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

20

Connecting with a RCA cable

1	and
	Left

= white, and Audio Right = red)

2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3Select AV1 input source using the INPUT button on the

If connected to AV IN 2, select AV2 input source.

AUDIO IN	VIDEO	L/MONO AUDIO R
(RGB/DVI)		<![if ! IE]> <![endif]>IN1AV

2

Y PB PR

1
VIDEO	AUDIO	ANTENNA IN

COMPONENT IN

1

! NOTE

G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.

S-VIDEO VIDEO	L	R	ANT IN
OUTPUT			ANT OUT
SWITCH

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

21

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

Connecting with a S-Video cable

	1	Connect the S-VIDEO output of the VCR to the S	-
		VIDEO input on the TV set. The picture quality	is AUDIO IN
		improved; compared to normal composite (RCA cable)
		input.	(RGB/DVI)
			2
		outputs of the VCR to the AUDIO
		TV.	Y
			1

VCR. (Refer to the VCR owner’s manual.)

Select AV1 input source with using the INPUT button on the remote control.

! NOTE

GIf both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

VIDEO L/MONO AUDIO

P R L

1	AUDIO
	2

R AV

<![if ! IE]>

<![endif]>IN1

ANTENNA IN

S-VIDEO VIDEO				L	R	ANT IN

OUTPUT	ANT OUT
SWITCH

22

DIGITAL AUDIO OUT SETUP

Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).

1Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.

cable to the digiequipment.

Set the “TV Speaker option - Off ” in the AUDIO

ment instruction manual for operation.

CAUTION

		DIGITAL
		OUT
		RS-232C IN
		(CONTROL & SERVICE)
AUDIO IN		/MONO AUDIO
(RGB/DVI)			<![if ! IE]> <![endif]>1 INAV
		1
2
Y	PB PR	L	R
1		2
	VIDEO	AUDIO	ANTENNA IN

COMPONENT IN

GDo not look into the optical output port. Looking at the laser beam may damage your vision.

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

23

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

VIDEO L R

<![if ! IE]>

<![endif]>IN 4

1

AV IN2

or

Camcorder

OPTICAL DIGITAL

AUDIO OUT

		RS-232C IN
		(CONTROL & SERVICE)
AUDIO IN	VIDEO	L/MONO AUDIO R
(RGB/DVI)		<![if ! IE]> <![endif]>IN1AV

VIDEO L/MONO AUDIO R

2
Y	PB
1
	VIDEO	ANTENNA IN	CABLE IN
	COMPONENT

Video Game Set

VIDEO L R

		1
1	O/VIDEO jacks between TV and external equipment. Match the jack colours .
	(Video = yellow, Audio Left = white, and Audio Right = red)

2Select AV1 input source with using the INPUT button on the remote control. If connected to AV IN 2, select AV2 input source.

3Operate the corresponding external equipment. Refer to external equipment operating guide.

24

USB SETUP (Only 32/37/42/47/55LH4***)

1

<![if ! IE]>

<![endif]>IN 3

1 Connect USB device to the USB IN jacks on the TV.

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

25

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

Connecting with a D-sub 15 pin cable
			(PC)		RS-232C IN
				(CONTROL & SERV
1	Connect the RGB output of the PC to the RGB	IN
	(PC) jack on the TV.
		AUDIO IN	OPTICAL DIGITAL
		(RGB/DVI)			VI
	audio output to the AUDIO IN
	the TV.	2
		PB		L	R
		1
	Turn on the PC and the TV.	VIDEO			AUDIO
		COMPONENT IN
		2

Select RGB input source using the INPUT button on the remote control.

AUDIO RGB OUTPUT

26

Connecting with a HDMI to DVI cable

1Connect the DVI output of the PC to the HDMI/DVI IN1 jack on the TV.

output to the AUDIO IN the TV.

Turn on the PC and the TV.

Select HDMI1 input source using the INPUT button on the remote control.

AUDIO IN	OPTICAL DIGIT

	(RGB/DVI)	AUDIO OUT	<![if ! IE]> <![endif]>EXTERNAL
	IN
2	2
	B	PR	<![if ! IE]> <![endif]>EQUIPMENT
1(DVI)	1
	VIDEO
	COMPONENT
1	2		<![if ! IE]> <![endif]>SETUP

			AUDIO
DVI-PC OUTPUT

27

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

Supported Display Resolution

RGB-PC, HDMI/DVI-PC mode				HDMI/DVI-DTV mode
Resolution	Horizontal	Vertical		Resolution	Horizontal	Vertical
	Frequency(kHz)	Frequency(Hz)			Frequency(kHz)	Frequency(Hz)
					31.469/31.5	59.94/60
720x400	31.468	70.08		720x480
640x480	31.469	59.94		720x576	31.25	50
800x600	37.879	60.31		1280x720	37.5	50
1024x768	48.363	60.00			44.96/45	59.94/60
1280x768	47.78	59.87		1920x1080	33.72/33.75	59.94/60
1360x768	47.72	59.80			28.125	50
1280x1024	63.595	60.00			26.97/27	23.97/24
1920x1080	66.587	59.93			33.716/33.75	29.976/30.00
(RGB-PC)					56.25	50
1920x1080	67.5	60.00			67.43/67.5	59.94/60
(HDMI-PC)

28