ENGLISH
LCD TV PLASMA TV OWNER’S MANUAL
LCD TV MODELS |
PLASMA TV MODELS |
|
26LC4* |
26LC5* |
42PC5* |
32LC4* |
32LC5* |
42PC5RV* |
37LC4* |
37LC5* |
50PC5* |
42LC4* |
42LC5* |
|
26LC3* |
|
|
Please read this manual carefully before operating your set. Retain it for future reference.
Record model number and serial number of the set. See the label attached on the back cover and quote
this information to your dealer when you require service.
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product.
|
|
|
|
IN |
|
|
|
|
|
PU |
|
|
|
|
|
TV |
T |
|
|
|
|
INPUT |
PO |
|
|
ARC |
|
WE |
|
|
|
|
R |
||
|
T |
|
|
|
TV |
P |
E |
|
|
||
IPP |
XT |
|
|
DV |
|
|
R- |
|
P |
|
|
|
|
PIP |
IP |
|
D |
|
|
PR+ |
SIZE |
VCR |
|
|
|
|
|
PIPPOSTION |
|
|
|
|
|
|
INPUT |
EXIT |
LIST |
ME
NU
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Owner’s Manual |
Batteries |
Plasma TV models
This feature is not available for all models.
2-Wall brackets |
2-eye-bolts |
LCD TV models
Polishing Cloth
Polish the screen with the cloth This feature is not available for all models.
*Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior.
Do not wipe roughly when removing stain. Please be cautious of that excessive power may cause scratch or discoloration.
This feature is not available for all models.
26LC4*, 32LC4*, 37LC4*, 42LC4*, 26LC5*, 32LC5*,
37LC5*, 42LC5* only
26”, 32”, 37” only
26LC3R* only
4-bolts for stand assembly |
Cable Management |
Refer to p. 8 |
ACCESSORIES
1
|
ACCESSORIES...................................................... |
1 |
CONTENTS |
|
|
|
PREPARATION |
|
|
Front Panel Controls....................................................... |
4 |
|
Back Panel Information .................................................. |
6 |
|
Stand Installation............................................................. |
8 |
|
Attaching the TV to a Wall ............................................. |
9 |
|
Back Cover for Wire Arrangement............................ |
10 |
|
Desktop Pedestal Installation..................................... |
12 |
|
Wall Mount: Horizontal installation .......................... |
13 |
|
Antenna Connection .................................................... |
14 |
|
EXTERNAL EQUIPMENT SETUP |
|
|
HD Receiver Setup ......................................................... |
15 |
|
DVD Setup....................................................................... |
18 |
|
VCR Setup....................................................................... |
21 |
|
Other A/V Source Setup ............................................ |
24 |
|
External Stereo............................................................... |
25 |
|
PC Setup........................................................................... |
26 |
|
- Screen Setup for PC Mode ................................. |
28 |
WATCHINGI TVV//PROGRAMMECONTROLTROL
Remote Control Key Functions................................... |
32 |
Turning on the TV......................................................... |
34 |
Programme Selection ................................................... |
34 |
Volume Adjustment........................................................ |
34 |
On Screen Menu Selection and Adjustment .......... |
35 |
Auto Programme Tuning.............................................. |
36 |
Manual Programme Tuning ......................................... |
37 |
Fine Tuning ....................................................................... |
38 |
Assigning a Station Name............................................ |
39 |
Programme Edit ............................................................. |
40 |
Favourite Programme .................................................... |
41 |
Calling the Programme Table ..................................... |
42 |
Key lock ........................................................................... |
43 |
................................................................... |
44 |
PICTURERE CONTROLCONTROL |
|
Picture Size (Aspect Ratio)Control........................... |
46 |
Preset Picture Settings |
|
- Picture Mode-Preset ............................................. |
48 |
- Auto Colour Tone Control(Warm/Medium/Cool)..49 |
|
Manual Picture Adjustment |
|
- Picture Mode-User Option ................................. |
50 |
- Colour Tone - User Option ................................. |
51 |
- Picture Improvement Technology..................... |
52 |
Demo................................................................... |
53 |
Advanced - Cinema........................................................ |
54 |
Advanced - Black(Darkness) Level............................. |
55 |
Picture Reset.................................................................... |
56 |
Image Sticking Minimization(ISM) Method ............ |
57 |
Low-Power Picture Mode.............................................. |
58 |
SOUND & LANGUAGE CONTROL |
|
Auto Volume Leveler...................................................... |
59 |
Preset Sound Settings - Sound Mode...................... |
60 |
Sound Setting Adjustment - User Mode ................. |
61 |
Balance.............................................................................. |
62 |
TV Speakers On/Off Setup......................................... |
63 |
I/II |
|
- Stereo/Dual Reception......................................... |
64 |
- NICAM Reception.................................................. |
65 |
- Speaker Sound Output Selection ..................... |
65 |
On-Screen Menu Language /Country Selection...... |
66 |
2
TIME SETTING |
|
Clock Setup...................................................................... |
67 |
Auto On/Off Timer Setting ......................................... |
68 |
Sleep Timer Setting ....................................................... |
69 |
Auto Shut-off Setting .................................................... |
70 |
TELETEXT |
|
Switch On/Off................................................................. |
71 |
SIMPLE Text ..................................................................... |
71 |
TOP Text ........................................................................... |
72 |
FASTEXT ........................................................................... |
72 |
Special Teletext Functions............................................ |
73 |
APPENDIX |
|
Troubleshooting.............................................................. |
74 |
Maintenance ................................................................... |
76 |
Product Specifications .................................................. |
77 |
Programming the Remote Control .......................... |
79 |
CONTENTS
3
PREPARATION
■This is a simplified representation of the front panel. Here shown may be somewhat different from your TV.
■If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the set is switched on.
INPUT |
MENU |
OK |
VOL |
PR |
POWER |
|
INPUT |
MENU |
|
OK |
|
|
|
|
|
|
|
|
|
|
||||
|
|
VOLUME |
|
PROGRAMME |
|||||
Button |
|
Button |
Button |
|
Button |
Buttons |
|
Buttons |
4
26LC4*, 32LC4*, 37LC4*, 42LC4*, 26LC5*, 32LC5*, |
37LC5*, 42LC5* |
Remote Control Sensor
Power/Standby Indicator
•illuminates red in standby mode.
•illuminates green when the set is switched on.
26LC3R* |
Remote Control Sensor
Power/Standby Indicator
•illuminates red in standby mode.
•illuminates green when the set is switched on.
PREPARATION
PR |
PROGRAMME Buttons |
VOL |
VOLUME Buttons |
|
|
OK |
OK Button |
|
|
MENU |
MENU Button |
INPUT |
INPUT Button |
/I |
POWER Button |
5
PREPARATION
■ This is a simplified representation of the back panel. Here shown may be somewhat different from your TV.
PREPARATION
|
|
AV IN 3 |
|
VIDEO-S |
S-Video Input |
|
|
|
|
R |
Connect S-Video out from an |
|
AUDIO |
S-VIDEO device. |
|
MONO/L |
Audio/Video Input |
|
|
|
|
VIDEO |
Connect audio/video output |
|
from an external device to |
|
|
|
these jacks. |
|
7 |
|
1 |
2 |
|
|
|
|
AV 1 |
|
AV 2 |
|
|
RGB IN |
|
ANTENNA |
|
|
|
RGB |
AUDIO |
|
|
|
|
|
IN |
||
HDMI/DVI IN |
HDMI IN |
(PC) |
(RGB/DVI) |
|
|
|
|
|
|
||
1 |
2 |
|
|
|
|
COMPONENT IN |
|
|
|
|
|
VIDEO |
AUDIO |
VARIABLE AUDIO OUT |
|
|
|
|
|
|
|
||
3 |
|
|
4 |
5 |
6 |
1HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.
2RGB/Audio Input
Connect the monitor output from a PCto the appropriate input port.
3Component Input
Connect a component video/audio device to these jacks.
5Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
6Antenna Input
Connect over-the-air signals to this jack.
7Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
4Variable Audio Output
Connect an external amplifier or add a subwoofer to your surround sound system.
6
37LC5*, 42LC5*
7 |
1
|
S-VIDEO |
|
|
|
S-Video Input |
R |
|
Connect S-Video out |
AUDIO |
|
from an S-VIDEO device. |
ONOM |
|
Audio/Video Input |
|
|
|
L/ |
|
Connect audio/video |
VIDEO |
|
|
|
output from an external |
|
|
AV IN 3 |
|
|
device to these jacks. |
|
|
|
|
2 |
|
|
26LC3R*
VIDEO L/MONO R S-VIDEO
AUDIO
AV IN 3
HDMI/DVI IN |
HDMI IN |
RGB IN |
AV 1 |
AV 2 |
|
|
|||
1 |
2 |
RGB |
AUDIO |
ANTENNA |
|
|
(PC) |
(RGB/DVI) |
IN |
VIDEO |
AUDIO |
VARIABLE |
COMPONENT IN |
|
AUDIO OUT |
|
3 |
|
4 |
|
5 |
6 |
|
1 |
|
2 |
|
|
|
26LC51C |
|
|
|
|
AV 1 |
AV 2 |
32LC52C |
HDMI/DVI IN |
HDMI IN |
RGB IN |
|
||
|
|
|
||||
|
1 |
2 |
RGB |
AUDIO |
|
ANTENNA |
|
(PC) |
(RGB/DVI) |
|
IN |
||
|
|
|
|
|||
|
VIDEO |
AUDIO |
VARIABLE |
RS-232CIN (CONTROL&SERVICE) |
|
|
|
|
|
AUDIO OUT |
|
|
|
|
3 |
|
4 |
8 |
5 |
6 |
1 HDMI Input |
|
|
|
5 |
Euro Scart Socket (AV1/AV2) |
|
Connect a HDMI signal to HDMI IN. |
|
|
Connect scart socket input or output from an |
|||
Or DVI(VIDEO)signal to HDMI/DVI port with DVI |
|
external device to these jacks. |
||||
to HDMI cable. |
|
|
|
|
|
|
|
|
|
|
6 |
Antenna Input |
2RGB/Audio Input
Connect the monitor output from a PC to the appropriate input port.
3Component Input
Connect a component video/audio device to these jacks.
Connect over-the-air signals to this jack.
7Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
8 RS-232C Input(CONTROL&SERVICE)Port
4 Variable Audio Output |
Connect the serial port of the control devices |
Connect an external amplifier or add a subwoofer |
to the RS-232C jack. |
to your surround sound system. |
|
PREPARATION
7
PREPARATION
PREPARATION
1Carefully place the product screen side down on a cushioned surface that will protect product and
screen from damage.
2Assemble the product stand with the product as shown.
3 |
Install the 4 bolts securely, in the back of the |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
product in the holes provided. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8
■This feature is not available for all models.
■Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
■The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don’t climb on or hang from the product.
Plasma TV models |
LCD TV models |
1 |
1 |
2 |
2 |
1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall.
3
3Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G When moving the product to another place undo the ropes first.
G Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.
PREPARATION
9
PREPARATION
PREPARATION
Plasma TV models
1 Hold the CABLE MANAGEMENT with hands and push it as shown.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CABLE MANAGEMENT |
|
|
|||||||
Connect the cables as |
|
|
|
|
|
|
|
|
|
|
||
To connect an additional |
|
|
External equipment Setup section. |
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 Reinstall the CABLE MA |
. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
LCD TV models
1
To connect an additional equipment, see the External equipment Setup section.
2
3
(This feature is not available for all models.)
CABLE MANAGEMENT |
How to remove the cable management
Hold the CABLE MANAGEMENT with both hands and pull it upward.
! NOTE
G Do not hold the CABLE MANAGEMENT when moving the product.
- If the product is dropped, you may be injured or the product may be broken.
PREPARATION
11
PREPARATION
PREPARATION
■The TV can be installed in various ways such as on a wall, or on a desktop etc.
■The TV is designed to be mounted horizontally.
Power Supply
Short-circuit Breaker
GROUNDING
Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
For proper ventilation, allow a clearance of 4inches on each side from the wall.
4 inches
4 inches |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 inches |
|
|
4 inches |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
PREPARATION
4 inches
4 inches
4 inches |
4 inches |
|
4 inches
13
PREPARATION
■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
PREPARATION
Wall
Antenna
Socket
Outdoor
Antenna
Antenna
Multi-family Dwellings/Apartments |
|
RGB IN |
|
|
|
AV 1 |
2 |
|
|
HDMI/DVI IN |
HDMI IN |
RGB IN |
IN |
||
|
|
AV 1 |
AV 2 |
1 |
2 |
|
ANTENN |
|
|
|
|
||||
(Connect to wall antenna socket) |
HDMI/DVI IN |
HDMI IN |
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
|
|
|
|
|
|
IN |
|
|
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
ANTENNA
Signal IN
Amplifier
VHF
■In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown above.
■If signal needs to be split for two TVs,use an antenna signal splitter for connection.
14
■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
■This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models.
1Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the set.
set-top box to
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select Component input source with using the INPUT button on the remote control.
1 |
2 |
|
SETUP EQUIPMENTEXTERNAL |
|
Signal |
Component |
HDMI1/2 |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
480i/576i |
Yes |
No |
|
|
||
|
480p/576p |
Yes |
Yes |
|
|
||
|
720p/1080i |
Yes |
Yes |
|
|
||
|
1080p |
No |
Yes |
|
|
|
(except VGA Models) |
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
1 |
2 |
1Connect the HDMI output of the digital set-top box to the HDMI/DVI IN 1 or HDMI IN 2 jack on the set.
2 Select HDMI1 or HDMI2 input source with using the INPUT button on the remote control.
1
3Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
! NOTE
GTV can receive the video and audio signal simultaneously with using a HDMI cable.
GIf the digital set-top box supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
GIf the digital set-top box player does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
16
1
1 |
2 |
1Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 jack on the set.
jack on the set.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select HDMI1 input source with using the INPUT button on the remote control.
SETUP EQUIPMENT EXTERNAL
17
EXTERNAL EQUIPMENT SETUP
1 |
Connect the video outputs (Y, PB, PR) of the DVD to the |
|
COMPONENT IN VIDEO jacks on the set. |
||
|
|
|
|
|
|
EXTERNAL |
Turn on the DVD player, insert a DVD. |
|
SETUPEQUIPMENT |
Refer to the DVD player's manual for operating instructions. |
|
|
Select Component input source with using the INPUT |
|
|
button on the remote control. |
|
|
|
|
|
|
|
12
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV |
Y |
PB |
PR |
|
|
|
|
|
|
|
|
|
Y |
PB |
PR |
Video output ports |
Y |
B-Y |
R-Y |
on DVD player |
Y |
Cb |
Cr |
|
Y |
Pb |
Pr |
|
|
|
|
18
1 |
Connect the Euro scart socket of the DVD to the AV1 Euro |
scart socket on the set. |
Select AV1 input source with using the INPUT button on the remote control.
1
source.
Refer to the DVD player's manual for operating instructions.
|
|
|
|
|
|
|
|
|
|
(R) AUDIO (L) |
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO/ |
|
||||||||
|
VIDEO |
|
|
! NOTE
G Please use the shield scart cable.
When connecting with an S-Video cable |
|
|
|
|
|
VIDEO S-VIDEO |
L R ANT IN |
1 |
Connect the S-VIDEO output of the DVD to the S - |
|
|
VIDEO input on the set. |
|
ANT OUT |
|
|
|
||
|
|
1 |
2 |
|
on the set. |
|
|
|
|
R |
|
|
Turn on the DVD player, insert a DVD. |
AUDIO |
|
|
|
|
|
|
Select AV3 input source with using the INPUT but- |
L/MONO |
|
|
VIDEO |
|
|
|
ton on the remote control. |
|
|
|
|
AV IN 3 |
|
Refer to the DVD player's manual for operating instructions.
SETUP EQUIPMENT EXTERNAL
19
EXTERNAL EQUIPMENT SETUP
VIDEO
AV IN 3
SETUP EQUIPMENT EXTERNAL
1Connect the HDMI output of the DVD to the HDMI/DVI IN 1 or HDMI IN 2 jack on the set.
2
3Refer instructions.
!NOTE
G TV can receive the video and audio signal simultaneously with using a HDMI cable.
G If the DVD supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
G If the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
1 |
2 |
1 |
|
Supported Display Resolution (HDMI-DTV mode)
|
|
|
Resolution |
Horizontal |
Vertical |
|
|
|
|
Frequency(KHz) |
Frequency(Hz) |
|
|
|
|
|
|
|
||
|
|
|
720x480 |
31.47 |
59.94 |
|
|
|
|
31.50 |
60.00 |
|
|
|
|
|
|
|
||
|
|
|
720x576 |
31.25 |
50.00 |
|
|
|
|
|
44.96 |
59.94 |
|
|
|
|
1280x720 |
45.00 |
60.00 |
|
|
|
|
|
37.50 |
50.00 |
|
|
|
|
|
33.72 |
59.94 |
|
|
|
|
1920x1080i |
33.75 |
60.00 |
|
|
|
|
|
28.125 |
50.00 |
|
|
|
|
|
|
|
|
|
|
|
1920x1080p |
67.432 |
59.94 |
|
(except VGA Models) |
|
|
67.5 |
60 |
|
|
|
|
|||||
|
|
|
|
|
||
|
|
|
|
56.25 |
50 |
|
|
|
|
|
|
|
|
20
■To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
ANT OUT S-VIDEO VIDEO |
L |
R |
|
|
|
|
|
|
|
|
|
1
OUTPUT
SWITCH
Wall Jack
2
Antenna
1Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the set.
Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for viewing.
SETUP EQUIPMENT EXTERNAL
21
EXTERNAL EQUIPMENT SETUP
|
1 |
Connect the Euro scart socket of the VCR to the AV1 Euro |
|
scart socket on the set. |
|
|
|
|
|
|
video tape into the VCR and press PLAY on the |
|
|
|
EXTERNAL |
|
|
|
(Refer to the VCR owner’s manual.) |
|
|
|
|
SETUPEQUIPMENT |
|
on the remote control. |
|
|
If connected to AV2 Euro scart socket, select AV2 input source.
1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(R) AUDIO (L) |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
AUDIO/ |
|
||||
|
|
|
|
|
VIDEO |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
! NOTE
G If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
22
1 |
EO |
jacks between TV and |
|
(Video = yellow, Audio Left |
|||
|
|||
|
= white, and Audio Right = red) |
|
2Insert a
VCR. (Refer to the VCR owner’s manual.)
3Select AV3 input source using the INPUT button on the remote control.
S-VIDEO
VIDEO MONO AUDIO R
AV IN 3
! NOTE
G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.
Connect the S-VIDEO output of the VCR to the S -
1VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the AUDIO input jacks on the set.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select AV3 input source with using the INPUT button on the remote control.
S-VIDEO
VIDEO L/MONO AUDIO R
AV IN 3
! NOTE
GIf both S-VIDEO and VIDEO sockets have been conneced to the S-VHS VCR simultaneously, only the S-VIDEO can be received.
1
S-VIDEO VIDEO |
L |
R |
ANT IN |
OUTPUT |
|
|
ANT OUT |
SWITCH |
|
|
|
S |
VIDEO |
L |
R |
ANT IN |
|
OUTPUT |
|
|
ANT OUT |
|
SWITCH |
|
|
|
12
SETUP EQUIPMENT EXTERNAL
23
EXTERNAL EQUIPMENT SETUP
EXTERNAL |
S-VIDEO |
|
|
EQUIPMENT |
L/MONOAUDIO R |
|
1 |
SETUP |
VIDEO |
|
AV IN 3 |
Camcorder
Video Game Set
VIDEO L R
1 |
between TV and external equipment. Match the jack colours. |
|
(Video = yellow, Audio Left = white, and Audio Right = red) |
||
|
||
|
|
2Select AV3 input source with using the INPUT button on the remote control.
3Operate the corresponding external equipment. Refer to external equipment operating guide.
24