OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
LED LCD TV MODELS |
|
|
LCD TV MODELS |
||
32LS3400 |
22LS3500 |
22LS3510 |
47LS4500 |
32CS460 |
32CS560 |
42LS3400 |
26LS3500 |
26LS3510 |
55LS4500 |
32CS461 |
37CS560 |
32LS3410 |
32LS3500 |
32LS3510 |
|
42CS530 |
42CS560 |
32LS3450 |
|
|
|
|
|
42LS3450 |
|
|
|
|
|
P/NO : SAC35375602 (1208-REV09) www.lg.com
<![endif]>ENGLISH
2 IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
yyDo not use this apparatus near water.
yyClean only with a dry cloth.
yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT SAFETY INSTRUCTIONS 3 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
yyProtect the power cord from being walked on |
yyKeep the packing anti-moisture material or |
|||||||||||||||||||
or pinched particularly at plugs, convenience |
vinyl packing out of the reach of children. |
|||||||||||||||||||
receptacles, and the point where they exit |
Anti-moisture material is harmful if |
|||||||||||||||||||
from the apparatus. |
swallowed. If swallowed by mistake, force |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
the patient to vomit and visit the nearest |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
hospital. Additionally, vinyl packing can |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
cause suffocation. Keep it out of the reach of |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
children. |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
yyOnly use attachments/accessories specified |
yyCAUTION concerning the Power Cord |
|||||||||||||||||||
by the manufacturer. |
(Can differ by country): |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
It is recommended that appliances be |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
placed upon a dedicated circuit; that is, a |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
single outlet circuit which powers only that |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
yyUse only with a cart, stand, tripod, bracket, |
appliance and has no additional outlets or |
|||||||||||||||||||
or table specified by the manufacturer, or |
branch circuits. Check the specification page |
|||||||||||||||||||
sold with the apparatus. When a cart is used, |
of this owner’s manual to be certain. Do not |
|||||||||||||||||||
use caution when moving the cart/apparatus |
connect too many appliances to the same |
|||||||||||||||||||
combination to avoid injury from tip-over. |
AC power outlet as this could result in fire or |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
electric shock. Do not overload wall outlets. |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Overloaded wall outlets, loose or damaged |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
wall outlets, extension cords, frayed power |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
cords, or damaged or cracked wire insulation |
||||||||
yyUnplug this apparatus during lightning |
are dangerous. Any of these conditions could |
|||||||||||||||||||
storms or when unused for long periods of |
result in electric shock or fire. Periodically |
|||||||||||||||||||
time. |
examine the cord of your appliance, and |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
if its appearance indicates damage or |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
deterioration, unplug it, discontinue use of |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
the appliance, and have the cord replaced |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
with an exact replacement part by an |
||||||||
yyRefer all servicing to qualified service |
authorized service. Protect the power cord |
|||||||||||||||||||
personnel. Servicing is required when |
from physical or mechanical abuse, such as |
|||||||||||||||||||
the apparatus has been damaged in any |
being twisted, kinked, pinched, closed in a |
|||||||||||||||||||
way, such as power-supply cord or plug is |
door, or walked upon. Pay particular attention |
|||||||||||||||||||
damaged, liquid has been spilled or objects |
to plugs, wall outlets, and the point where |
|||||||||||||||||||
have fallen into the apparatus, the apparatus |
the cord exits the appliance. Do not move |
|||||||||||||||||||
has been exposed to rain or moisture, does |
the TV with the power cord plugged in. Do |
|||||||||||||||||||
not operate normally, or has been dropped. |
not use a damaged or loose power cord. Be |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
sure do grasp the plug when unplugging the |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
power cord. Do not pull on the power cord |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
to unplug the TV. |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
yyDo not stick metal objects or any other |
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
||||||||||||
conductive material into the power cord. Do |
|
|
|
|
|
|
|
|
|
|||||||||||
not touch the end of the power cord while it |
|
|
|
|
|
|
|
|
|
|||||||||||
is plugged in. |
|
|
|
|
|
|
|
|
|
<![endif]>ENGLISH
<![endif]>ENGLISH
4 IMPORTANT SAFETY INSTRUCTIONS
yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
yyGrounding
(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply
Short-circuit
Breaker
yyDISCONNECTING DEVICE FROM THE MAIN POWER
Mains plug is the disconnecting device. The plug must remain readily operable.
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
yyDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
yyANTENNAS Outdoor antenna grounding
(Can differ by country):
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
Antenna Lead in Wire |
||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
Antenna Discharge Unit |
||||||||
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electric Service |
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-20) |
Equipment |
|
|
|
|
|
|
|
|
|
Grounding Conductor |
|||
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-21) |
|
|
|
|
|
|
|
|
|
|
Power Service Grounding
NEC: National Electrical Code Electrode System
(NEC Art 250, Part H)
|
|
|
|
|
IMPORTANT SAFETY INSTRUCTIONS 5 |
|
yyCleaning |
yyDot Defect |
|
||||
When cleaning, unplug the power cord and |
The Plasma or LCD panel is a high |
|||||
wipe gently with a soft cloth to prevent |
technology product with resolution of two |
|||||
scratching. Do not spray water or other |
million to six million pixels. In a very few |
|||||
liquids directly on the TV as electric shock |
cases, you could see fine dots on the screen |
|||||
may occur. Do not clean with chemicals |
while you’re viewing the TV. Those dots |
|||||
such as alcohol, thinners or benzine. |
are deactivated pixels and do not affect the |
|||||
yyMoving |
performance and reliability of the TV. |
|||||
Make sure the product is turned off, |
yyGenerated Sound |
|||||
unplugged and all cables have been |
“Cracking” noise: A cracking noise that |
|||||
removed. It may take 2 or more people to |
occurs when watching or turning off the TV |
|||||
carry larger TVs. Do not press or put stress |
is generated by plastic thermal contraction |
|||||
on the front panel of the TV. |
due to temperature and humidity. This noise |
|||||
yyVentilation |
is common for products where thermal |
|||||
Install your TV where there is proper |
deformation is required. |
|||||
ventilation. Do not install in a confined |
Electrical circuit humming/panel buzzing: A |
|||||
space such as a bookcase. Do not cover the |
low level noise is generated from a high- |
|||||
product with cloth or other materials while |
speed switching circuit, which supplies a |
|||||
plugged. Do not install in excessively dusty |
large amount of current to operate a product. |
|||||
places. |
It varies depending on the product. |
|||||
yyIf you smell smoke or other odors coming |
This generated sound does not affect the |
|||||
from the TV, unplug the power cord and |
performance and reliability of the product. |
|||||
contact an authorized service center. |
yyTake care not to touch the ventilation |
|||||
yyDo not press strongly upon the panel with a |
openings. When watching the TV for a long |
|||||
hand or a sharp object such as a nail, pencil |
period, the ventilation openings may become |
|||||
or pen, or make a scratch on it. |
hot. This does not affect the performance of |
|||||
yyKeep the product away from direct sunlight. |
the product or cause defects in the product. |
|||||
|
|
|
|
|
yyIf the TV feels cold to the touch, there may |
|
|
|
|
|
|
||
|
|
|
|
|
be a small “flicker” when it is turned on. This |
|
|
|
|
|
|
is normal, there is nothing wrong with TV. |
|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Some minute dot defects may be visible on |
|
yyNever touch this apparatus or antenna during |
the screen, appearing as tiny red, green, or |
|||||
a thunder or lightning storm. |
blue spots. However, they have no adverse |
|||||
yyWhen mounting a TV on the wall, make sure |
effect on the TV’s performance. Avoid |
|||||
not to install the TV by hanging the power |
touching the LCD screen or holding your |
|||||
and signal cables on the back of the TV. |
finger(s) against it for long periods of time. |
|||||
yyDo not allow an impact shock or any objects |
Doing so may produce some temporary |
|||||
to fall into the product, and do not drop |
distortion effects on the screen. |
|||||
anything onto the screen. |
|
|
<![endif]>ENGLISH
<![endif]>ENGLISH
6 IMPORTANT SAFETY INSTRUCTIONS
DISPOSAL (Hg lamp only used in LCD TVs)
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
For USA and Canada
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 7
Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit 'http://opensource.lge.com'.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
8 TABLE OF CONTENTS
2 |
IMPORTANT SAFETY |
36 |
WATCHING TV |
||
|
INSTRUCTIONS |
|
|
|
|
|
36 |
Connecting to the AC/DC adapter |
|||
|
|
||||
|
|
36 |
Turning the TV on for the first time |
||
7 |
LICENSES |
37 |
Watching TV |
||
37 |
Managing channels |
||||
|
|
||||
|
|
37 |
- Setting up channels |
||
7 |
OPEN SOURCE SOFTWARE |
38 |
- Using favorite channels |
||
|
NOTICE |
39 |
- Checking current program info |
||
|
|
40 |
Using additional options |
||
8 |
TABLE OF CONTENTS |
40 |
- Adjusting aspect ratio |
||
41 |
- Changing AV modes |
||||
|
|
41 |
- Using the input list |
||
10 |
INSTALLATION PROCEDURE |
42 |
Using the quick menu |
||
|
|
|
|||
10 |
ASSEMBLING AND PREPARING |
43 |
ENTERTAINMENT |
||
|
|
|
|||
43 |
- Connecting USB storage devices |
||||
|
|
||||
10 |
Unpacking |
44 |
- Browsing files |
||
17 |
Parts and buttons |
45 |
- Viewing Photos |
||
21 |
Lifting and moving the TV |
46 |
- Listening to music |
||
22 |
Setting up the TV |
|
|
|
|
22 |
- Attaching the stand |
48 |
CUSTOMIZING TV SETTINGS |
||
30 |
- Mounting on a table |
||||
|
|
|
|||
48 |
The Main Menus |
||||
32 |
- Mounting on a wall |
||||
33 |
- Tidying cables |
49 |
Customizing Settings |
||
|
|
49 |
- CHANNEL Settings |
||
34 |
REMOTE CONTROL |
50 |
- PICTURE Settings |
||
53 |
- AUDIO Settings |
||||
|
|
||||
|
|
54 |
- TIME Settings |
||
|
|
55 |
- OPTION Settings |
||
|
|
57 |
- LOCK Settings |
TABLE OF CONTENTS 9
59 |
MAKING CONNECTIONS |
|
|
|
|
NOTE |
|
||
|
|
|
|
may differ from your TV. |
59 |
Connecting to an antenna or cable |
yyImage shown |
||
60 |
Connection Overview |
yyYour TV’s OSD (On Screen Display) may |
||
|
differ slightly from that shown in this |
|||
61 |
Connecting to a HD receiver, DVD, or |
|
||
|
manual. |
|||
|
VCR player |
|
||
|
yyThe available menus and options may differ |
|||
61 |
- HDMI Connection |
|
from the input source or product model that |
|
62 |
- Component Connection |
|
you are using. |
|
63 |
- Composite Connection |
yyNew features may be added to this TV in |
||
|
the future. |
|||
64 |
Connecting to a PC |
|
||
|
|
|
||
64 |
- HDMI Connection |
|
|
|
65 |
Connecting to an Audio System |
|
|
|
65 |
- Digital Optical Audio Connection |
|
|
|
66 |
Connecting to a USB |
|
|
|
67 |
SIMPLINK Connection |
|
|
|
67- Activating and Using the SIMPLINK menus
68MAINTENANCE
68 Cleaning Your TV
68- Screen, frame, cabinet and stand
68- Power cord
68Preventing “Image burn” or “Burn-in” on your TV screen
69TROUBLESHOOTING
71 SPECIFICATIONS
75 IR CODES
<![endif]>ENGLISH
<![endif]>ENGLISH
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
1Open the package and make sure all the accessories are included.
2Attach the stand to the TV set.
3Connect an external device to the TV set.
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty. yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off. yyPower Cord Installation Guide
-If the power cord provided with the TV looks like the below picture, please ensure that it is inserted in the correct direction.
TV
Power Cord |
Correct |
Wrong |
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
yyUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.
AA
*A 10 mm (0.39 inches) *B
18 mm (0.7 inches)
ASSEMBLING AND PREPARING 11
For CS460, CS461, LS3400, LS3410 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
Owner’s manual, |
Power Cord |
||||||
Batteries (AAA) |
|
CD manual |
|
||||||
(See p.34) |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Stand Body |
Stand Base |
Stand Screws |
(See p.22) |
(See p.22) |
8 EA, M4 x 20 |
|
|
(See p.22) |
<![endif]>ENGLISH
Protection cover |
|
Desk-mount Screw |
(See p.29) |
|
(See p.30) |
|
|
|
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
For LS3450 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
Owner’s manual, |
Power Cord |
||||||||
Batteries (AAA) |
|
CD manual |
|
||||||||
(See p.34) |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
(for 32LS3450) |
|
(for 42LS3450) |
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Stand Body / Stand Base |
|
Stand Body / Stand Base |
|
Desk-mount Screw |
(See p.23) |
|
(See p.24) |
|
(See p.30) |
|
|
|
|
|
(for 32LS3450) |
|
(for 42LS3450) |
|
|
Stand Screws |
|
Stand Screws |
Cable holder |
|
2 EA, P4 x 16 |
|
4 EA, P4 x 16 |
(See p.33) |
|
4 EA, M4 x 20 |
|
4 EA, M4 x 14 |
|
|
(See p.23) |
|
(See p.24) |
|
|
|
|
|
|
|
(for 32LS3450) |
|
|
|
|
Protection cover
(See p.29)
ASSEMBLING AND PREPARING 13
For CS530, CS560 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
Owner’s manual, |
|
Power Cord |
|||||
Batteries (AAA) |
|
CD manual |
|
|
|||||
(See p.34) |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Stand Body |
Stand Base |
Stand Screws |
(See p.25) |
(See p.25) |
8 EA, M4 x 20 |
|
|
(See p.25) |
<![endif]>ENGLISH
Protection cover |
|
Desk-mount Screw |
(See p.29) |
|
(See p.30) |
|
|
|
<![endif]>ENGLISH
14 ASSEMBLING AND PREPARING
For 22/26LS3500, 22/26LS3510
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
Owner’s manual, |
|
Power Cord |
|||||
Batteries (AAA) |
|
CD manual |
|
|
|||||
(See p.34) |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(For 22LS3500, 22LS3510) |
Stand Body |
|
Stand Base |
Stand Screws |
|
(See p.26) |
|
(See p.26) |
2 EA, P4 x 16 |
|
|
|
|
|
(See p.26) |
|
|
|
|
|
(For 26LS3500, 26LS3510) |
|
|
|
|
Stand Screws |
|
Cable holder |
AC/DC Adapter |
|
2 EA, M4 x 14 |
|
(See p.33) |
|
|
(See p.26) |
|
|
|
|
|
|
|
|
|
ASSEMBLING AND PREPARING 15
For 32LS3500, 32LS3510
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
Owner’s manual, |
|
Power Cord |
|||||
Batteries (AAA) |
|
CD manual |
|
|
|||||
(See p.34) |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Stand Body |
|
Stand Base |
|
Stand Screws |
(See p.27) |
|
(See p.27) |
|
4 EA, P4 x 16 |
|
|
|
|
4 EA, M4 x 14 |
|
|
|
|
(See p.27) |
|
|
|
|
|
Desk-mount Screw |
|
Cable holder |
(See p.30) |
|
(See p.33) |
|
|
|
<![endif]>ENGLISH
<![endif]>ENGLISH
16 ASSEMBLING AND PREPARING
For 47LS4500, 55LS4500
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
Owner’s manual, |
|
Wall Mount Inner Spacers |
|||||
Batteries (AAA) |
|
CD manual |
|
4 EA |
|||||
(See p.34) |
|
|
|
|
|
(See p.32) |
|||
|
|
|
|
|
|
|
|
|
|
Stand Body |
|
Stand Base |
|
Stand Screws |
(See p.28) |
|
(See p.28) |
|
8 EA, M4 x 20 |
|
|
|
|
(See p.28) |
|
|
|
|
|
(for 47LS4500) |
|
|
|
|
Desk-mount Screw |
|
Cable holder |
|
Power Cord |
(See p.30) |
|
(See p.33) |
|
|
|
|
|
|
|
ASSEMBLING AND PREPARING 17
For CS460, CS461, CS530, CS560, LS3400, LS3410 series
Side Connection panel
USB input
<![endif]>USB IN
SERVICE |
<![if ! IE]> <![endif]>ONLY |
ONLY |
<![if ! IE]> <![endif]>SERVICE |
Screen
Speakers
Remote control and Intelligent sensors1
Power indicator
OK |
SETTINGS |
INPUT |
For CS460, CS461, |
|
LS3400,LS3410 series |
||||
|
|
|
||
|
|
|
Touch buttons2 |
|
OK |
SETTINGS |
INPUT |
For CS530, |
|
|
|
|
CS560series |
|
|
|
VIDEO |
AV IN |
L/MONOAUDIO-R |
|
Rear Connection |
||
|
|
|
|
ANTENNA/ |
panel |
||||
|
|
|
|
|
|
|
|
||
IN |
1 |
2 |
Y |
P |
P |
L |
R |
CABLE IN |
(See p.59) |
|
VIDEO |
AUDIO |
|
|
|
||||
|
|
|
|
|
|
|
|||
|
|
|
|
|
COMPONENT IN |
|
|
|
|
Touch button2 |
Description |
/ I |
Turns the power on or off. |
|
|
|
|
INPUT |
Changes the input source. |
|
|
|
|
SETTINGS |
Accesses the main menus, or saves your input and exits the menus. |
|
|
|
|
OK |
Selects the highlighted menu option or confirms an input. |
|
|
|
|
- |
+ |
Adjusts the volume level. |
|
|
|
v |
^ |
Scrolls through the saved channels. |
|
|
|
1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2All of the buttons are touch sensitive and can be operated through simple touch with your finger.
<![endif]>ENGLISH
18 ASSEMBLING AND PREPARING
For LS3450 series
Side Connection panel
USB input
<![endif]>USB IN
SERVICE
ONLY
<![if ! IE]><![endif]>ENGLISH
Screen |
Buttons |
|
OK
SETTINGS
INPUT
Speakers
Remote control and intelligent sensors1
Power indicator
|
|
|
|
|
AV IN |
|
|
|
Rear Connection |
|
|
|
VIDEO |
|
L/MONOAUDIO-R |
ANTENNA/ |
panel |
||
|
|
|
|
|
|
|
|
(See p.59) |
|
IN |
1 |
2 |
Y |
P |
P |
L |
R |
CABLE IN |
|
|
|
|
|
VIDEO |
AUDIO |
|
|
|
|
|
|
|
|
|
COMPONENT IN |
|
|
|
Buttons |
Description |
Turns the power on or off.
INPUT |
Changes the input source. |
|
|
|
|
SETTINGS S |
Accesses the main menus, or saves your input and exits the menus. |
|
|
|
|
OK |
|
Selects the highlighted menu option or confirms an input. |
|
|
|
- |
+ |
Adjusts the volume level. |
|
|
|
v |
^ |
Scrolls through the saved channels. |
1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
ASSEMBLING AND PREPARING 19
For LS3500, LS3510 series
Side Connection panel
Screen
USB input |
<![if ! IE]> <![endif]>IN |
|
<![if ! IE]> <![endif]>USB |
SERVICE |
<![if ! IE]> <![endif]>SERVICE ONLY |
ONLY |
Remote control and
Intelligent sensors1
Power indicator
Speakers
OK |
SETTINGS INPUT |
Touch buttons2 |
DC-IN
|
|
|
VIDEO |
|
AV IN |
L/MONO - AUDIO - R |
ANTENNA/ |
|
|||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
CABLE IN |
For 22/26LS3500, |
|
|
|
|
|
|
|
|
|
|
|
|
IN |
1 |
2 |
Y |
P |
|
P |
L |
R |
|
|
22/26LS3510 |
|
AUDIO |
|
|
||||||||
|
|
|
|
VIDEO |
|
|
|
|
|
||
|
|
|
|
|
COMPONENT IN |
|
|
Rear Connection |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AV IN |
|
|
|
|
panel |
|
|
|
|
VIDEO |
|
L/MONO - AUDIO - R |
|
(See p.59) |
||||
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
ANTENNA/ |
For 32LS3500, |
IN |
1 |
2 |
Y |
P |
|
P |
|
L |
R |
CABLE IN |
|
|
|
|
|
VIDEO |
|
|
AUDIO |
|
|
32LS3510 |
|
|
|
|
|
|
COMPONENT IN |
|
|
|
Touch button2 |
Description |
/ I |
Turns the power on or off. |
|
|
|
|
INPUT |
Changes the input source. |
|
|
|
|
SETTINGS |
Accesses the main menus, or saves your input and exits the menus. |
|
|
|
|
OK |
Selects the highlighted menu option or confirms an input. |
|
|
|
|
- |
+ |
Adjusts the volume level. |
|
|
|
v |
^ |
Scrolls through the saved channels. |
|
|
|
1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2All of the buttons are touch sensitive and can be operated through simple touch with your finger.
<![endif]>ENGLISH
20 ASSEMBLING AND PREPARING
For LS4500 series
Screen
Side Connection panel
USB input
<![endif]>USB IN
SERVICE |
<![if ! IE]> <![endif]>ONLY |
|
ONLY |
||
|
Remote control and intelligent sensors1
Power indicator
<![if ! IE]> <![endif]>ENGLISH |
|
|
Speakers |
|
|
|
|
||
|
|
|
|
OK |
SETTINGS |
INPUT |
Touch buttons2 |
||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
OPTICAL |
|
|
|
|
|
|
|
|
|
DIGITAL |
|
Rear Connection |
|
|
|
|
|
|
AUDIO OUT |
|
||
|
|
|
|
|
|
|
|
|
panel |
|
|
|
VIDEO |
AV IN |
L/MONOAUDIO-R |
|
(See p.59) |
||
|
|
|
|
ANTENNA/ |
|
||||
|
|
|
|
|
|
|
|
|
|
IN |
1 |
2 |
Y |
P |
P |
L |
R |
CABLE IN |
|
|
|
||||||||
|
|
|
|
VIDEO |
AUDIO |
|
|
||
|
|
|
|
|
COMPONENT IN |
|
|
|
|
Touch button2 |
|
|
|
|
|
|
Description |
|
/ I |
Turns the power on or off. |
|
|
INPUT |
Changes the input source. |
|
|
SETTINGS |
Accesses the Home menu, or saves your input and exits the menus. |
|
|
OK |
Selects the highlighted menu option or confirms an input |
|
|
- , + |
Adjusts the volume level. |
|
|
v , ^ |
Scrolls through the saved channels. |
1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2All of the buttons are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING 21
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yyAvoid touching the screen at all times, as this may result in damage to the screen.
yyIt is recommended to move the TV in the box or packing material that the TV originally came in.
yyBefore moving or lifting the TV, disconnect the power cord and all cables.
yyWhen holding the TV, the screen should face away from you to avoid damage.
yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
yyWhen transporting a large TV, there should be at least 2 people.
yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.
yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
<![endif]>ENGLISH
<![endif]>ENGLISH
22 ASSEMBLING AND PREPARING
Put your TV on a pedestal stand and mount the TV on a table or wall.
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
For CS460, CS461, LS3400, LS3410 series
1
4 EA
M4 x 20
Stand Body
Front
Stand Base
3
2
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
4 EA
M4 x 20
CAUTION
yyMake sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
yyDo not fasten the screws with too much force; otherwise they may be worn out and get loosened.
ASSEMBLING AND PREPARING 23
For 32LS3450
1 |
2 |
|
2 EA |
|
P4 x 16 |
|
Stand Body |
|
Stand Base |
|
CAUTION |
|
yyWhen attaching the stand to the TV |
3 |
set, place the screen facing down on a |
|
cushioned table or flat surface to protect |
the screen from scratches.
4 EA
M4 x 20
CAUTION
yyMake sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
yyDo not fasten the screws with too much force; otherwise they may be worn out and get loosened.
<![endif]>ENGLISH