LG 32LS3400 Owner's Manual

OWNER’S MANUAL

LED LCD TV / LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD TV MODELS LCD TV MODELS

32LM3400 42LM3400

P/NO : MFL67468023 (1205-REV02)

32LS3400 42LS3400

22LS3500 32LS3500

32CS460 42CS460

32CS560 42CS560

www.lg.com

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

ENGLISH

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

Read these instructions.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Keep these instructions. Heed all warnings. Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install

in accordance with the manufacturer’s instructions.

ENGLISH

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified

by the manufacturer.

Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning

storms or when unused for long periods of time.

Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Keep the packing anti-moisture material or

vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. CAUTION concerning the Power Cord

(Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

Do not stick metal objects or any other

conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

IMPORTANT SAFETY INSTRUCTIONS

Warning

- To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

Do not expose to dripping or splashing and

do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Short-circuit

Breaker

Power Supply

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in any

way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

ANTENNAS Outdoor antenna grounding

(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

ENGLISH

DISCONNECTING DEVICE FROM THE MAIN

POWER

Mains plug is the disconnecting device. The plug must remain readily operable.

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

Short-circuit

Breaker

Power Supply

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

Moving

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odors coming

from the TV, unplug the power cord and contact an authorized service center. Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil or pen, or make a scratch on it. Keep the product away from direct sunlight.

Never touch this apparatus or antenna during

a thunder or lightning storm. When mounting a TV on the wall, make sure

not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects

to fall into the product, and do not drop anything onto the screen.

Dot Defect

The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. Take care not to touch the ventilation

openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

Preventing “Image burn” or “Burn-in” on your TV screen

If a fixed image displays on the TV screen

for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for

a long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

Viewing 3D Imaging (For 3D models)

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Viewing Environment

Viewing Time

- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

Some users may experience a seizure or other abnormal symptoms when they are exposed to a

flashing light or particular pattern from 3D contents. Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as

epilepsy, cardiac disorder, or blood pressure disease, etc. 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.

Double images or discomfort in viewing may be experienced. If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble

sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

contents.

Symptoms which require discontinuation or refraining from watching 3D contents

Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

When these symptoms are experienced, stop using/watching 3D contents and get enough rest until

the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

Viewing Environment

Viewing Distance

- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

Infants / Children

- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

Teenagers

- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

Elderly

- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

ENGLISH

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

Using modified 3D glasses may cause eye strain or image distortion.

Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when

wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

TABLE OF CONTENTS

2 LICENSES

2 OPEN SOURCE SOFTWARE NOTICE

3 IMPORTANT SAFETY INSTRUCTIONS

8 Viewing 3D Imaging (For 3D models)

10 TABLE OF CONTENTS

11 INSTALLATION PROCEDURE

11 ASSEMBLING AND PREPARING

11 Unpacking 16 Optional Extras 17 Parts and buttons 19 Lifting and moving the TV 20 Setting up the TV

ENGLISH

20 - Attaching the stand 25 - Mounting on a table 27 - Mounting on a wall 28 - Tidying cables

29 MAKING CONNECTIONS

29 Connecting to an antenna or cable 30 Connecting to a HD receiver, DVD, or VCR

30 - HDMI Connection 31 - Component Connection 32 - Composite Connection

33 Connecting to a PC 33 - HDMI Connection

33 Connecting to a USB

player

34 REMOTE CONTROL

38 WATCHING TV

38 Connecting to the AC/DC adapter

(For 22LS3500)

38 Turning the TV on for the first time

39 USING THE USER GUIDE

40 SPECIFICATIONS

43 MAINTENANCE

43 Cleaning Your TV 43 - Screen, frame, cabinet and stand 43 - Power cord

43 TROUBLESHOOTING

NOTE

Image shown may differ from your TV.

Your TV’s OSD (On Screen Display) may

differ slightly from that shown in this manual. The available menus and options may differ

from the input source or product model that you are using. New features may be added to this TV in

the future.

ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

Attach the stand to the TV set.

Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

NOTE

The items supplied with your product may vary depending on the model.

Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39

inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit

into your TV's USB port.

*A 10 mm (0.39 inches) *B

18 mm (0.7 inches)

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

Any damages or injuries by using unapproved items are not covered by the warranty.

In case of some model, the thin film on screen is a part of TV, So don’t take it off.

ENGLISH

ASSEMBLING AND PREPARING

For 22LS3500

ENGLISH

Remote control, Batteries (AAA)

(See p.34)

Stand Body

(See p.20)

Cable holder

(See p.28)

Owner’s manual

Stand Base

(See p.20)

Power Cord AC/DC Adapter

Polishing cloth

(Depending on model) Use this to remove dust from the cabinet.

Stand Screws

2 EA, P4 x 16 (See p.20)

(See p.38)

For 32LS3500

ASSEMBLING AND PREPARING

Remote control, Batteries (AAA)

(See p.34)

Stand Body

(See p.21)

Desk-mount Screw

(See p.25)

Owner’s manual

Stand Base

(See p.21)

Cable holder

(See p.28)

Polishing cloth

(Depending on model) Use this to remove dust from the cabinet.

Stand Screws

4 EA, P4 x 16 4 EA, M4 x 14 (See p.21)

Power Cord

ENGLISH

ASSEMBLING AND PREPARING

For CS460, LM3400, LS3400 series

ENGLISH

Remote control, Batteries (AAA)

(See p.34, p.36)

Stand Body

(See p.22)

(For 32CS460, 32LM3400 32LS3400)

Protection cover

(See p.24)

Owner’s manual

Stand Base

(See p.22)

(For 42CS460, 42LM3400 42LS3400)

Protection cover

(See p.24)

Polishing cloth

(Depending on model) Use this to remove dust from the cabinet.

Stand Screws

8 EA, M4 x 20 (See p.22)

Desk-mount Screw

(See p.25)

(For 32/42LM3400)

Power Cord Cinema 3D Glasses

The number of 3D glasses may differ depending on the model or country.

For CS560 series

ASSEMBLING AND PREPARING

Remote control, Batteries (AAA)

(See p.34)

Stand Body

(See p.23)

Protection cover

(See p.24)

Owner’s manual

Stand Base

(See p.23)

Desk-mount Screw

(See p.25)

Polishing cloth

(Depending on model) Use this to remove dust from the cabinet.

Stand Screws

8 EA, M4 x 20 (See p.23)

Power Cord

ENGLISH

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models.

AG-F3**

Cinema 3D Glasses

The model name or design may be changed manufacturer’s circumstances or policies.

ENGLISH

Compatibility

AG-F3**

Cinema 3D Glasses

CS460 CS560 LM3400 LS3400

•

Parts and buttons

For CS460, CS560, LS3400, LM3400 series

Screen

ASSEMBLING AND PREPARING

Remote control and intelligent1 sensors

Power indicator

Speakers

For CS460, LM3400,

Touch button

ꔰ

INPUT Changes the input source. SETTINGS Accesses the Home menu, or saves your input and exits the menus.

ꔉ

- + Adjusts the volume level. v

Turns the power on or off.

Selects the highlighted menu option or confirms an input

Scrolls through the saved channels.

SETTINGS

INPUT

Description

LS3400 series

For CS560 series

Touch buttons

ENGLISH

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

ASSEMBLING AND PREPARING

For LS3500 series

Screen

Remote control and intelligent1 sensors

Power indicator

ENGLISH

Speakers

Touch button

ꔰ

INPUT Changes the input source. SETTINGS Accesses the Home menu, or saves your input and exits the menus.

ꔉ

- + Adjusts the volume level. v

Turns the power on or off.

Selects the highlighted menu option or confirms an input

Scrolls through the saved channels.

SETTINGS

INPUT

Description

Touch buttons

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

Avoid touching the screen at all times, as

this may result in damage to the screen.

It is recommended to move the TV in the

box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect

the power cord and all cables. When holding the TV, the screen should face

away from you to avoid damage.

ASSEMBLING AND PREPARING

When transporting a large TV, there should

be at least 2 people. When transporting the TV by hand, hold the

TV as shown in the following illustration.

When transporting the TV, do not expose the

TV to jolts or excessive vibration. When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt towards the left or right.

Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

ENGLISH

ASSEMBLING AND PREPARING

Setting up the TV

Put your TV on a pedestal stand and mount the TV on a table or wall.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

For 22LS3500

Stand Body

ENGLISH

Stand Base

CAUTION

When attaching the stand to the TV

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

NOTE

Remove the stand before installing the TV

on a wall mount by performing the stand attachment in reverse.

2 EA

P4 x 16

CAUTION

Make sure that the screws are fastened

completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much

force; otherwise they may be worn out and get loosened.

For 32LS3500

ASSEMBLING AND PREPARING

Stand Body

4 EA

P4 x 16

CAUTION

When attaching the stand to the TV

Stand Base

Front

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

ENGLISH

NOTE

Remove the stand before installing the TV

on a wall mount by performing the stand attachment in reverse.

4 EA

M4 x 14

CAUTION

Make sure that the screws are fastened

completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much

force; otherwise they may be worn out and get loosened.

ASSEMBLING AND PREPARING

For CS460, LM3400, LS3400 series

ENGLISH

4 EA

M4 x 20

Stand Base

Stand Body

Front

CAUTION

When attaching the stand to the TV

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

4 EA

M4 x 20

CAUTION

Make sure that the screws are fastened

completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much

force; otherwise they may be worn out and get loosened.

For CS560 series

ASSEMBLING AND PREPARING

Stand Body

Front

4 EA

M4 x 20

Stand Base

CAUTION

When attaching the stand to the TV

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

ENGLISH

4 EA

M4 x 20

CAUTION

Make sure that the screws are fastened

completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much

force; otherwise they may be worn out and get loosened.

ASSEMBLING AND PREPARING

To detach the stand,

4 EA

M4 x 20

CAUTION

When attaching the stand to the TV

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

ENGLISH

Protection cover

NOTE

This will protect the opening from

accumulating dust and dirt. When installing the wall mounting bracket,

use the Protection cover.

ASSEMBLING AND PREPARING

Mounting on a table

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

Connect the power cord to a wall outlet.

CAUTION

Do not place the TV near or on sources

of heat, as this may result in fire or other damage.

Adjusting the angle of the TV to suit view

10 cm

Securing the TV to a table

(For 32/42CS460, 32/42CS560, 32/42LM3400, 32/42LS3400, 32LS3500) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.

WARNING

To prevent TV from falling over, the TV

should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.

ENGLISH

(Depending on model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.

2020

CAUTION

When adjusting the angle of the TV,

watch out for your fingers.

- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.

ASSEMBLING AND PREPARING

(Depending on model)

ENGLISH

Securing the TV to a wall (optional)

Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets tightly

with a sturdy rope. Make sure to keep the rope horizontal with the

flat surface.

Using the Kensington security system (optional)

(Depending on model)

The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the TV and a table.

NOTE

The Kensington security system is optional.

You can obtain additional accessories from your local dealer.

CAUTION

Make sure that children do not climb on or

hang on the TV.

NOTE

Use a platform or cabinet that is strong and

large enough to support the TV securely. Brackets, bolts and ropes are optional. You

can obtain additional accessories from your local dealer.

ASSEMBLING AND PREPARING

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.

We recommend that you use an LG brand wall mount when mounting the TV to a wall.

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model 22LS3500 32CS460

VESA 100 x 100 200 x 100 Standard screw M4 M4 Number of screws 4 4 Wall mount bracket

(optional)

LSW100B LSW100B

32CS560 32LM3400 32LS3400 32LS3500

CAUTION

Disconnect the power first, and then move

or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted

wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may

cause damage to the TV and void your warranty. Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

Use the screws that are listed on the VESA

standard screw specifications. The wall mount kit includes an installation

manual and necessary parts. The wall mount bracket is optional. You can

obtain additional accessories from your local dealer. The length of screws may differ depending

on the wall mount. Make sure to use the proper length. For more information, refer to the manual

supplied with the wall mount.

ENGLISH

Model 42CS460

VESA 200 x 200 Standard screw M6 Number of screws 4 Wall mount bracket

(optional)

42CS560 42LM3400 42LS3400

LSW200BX

+ 61 hidden pages