OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and retain it for future reference.
MONITOR SIGNAGE MODELS
32LS33A 42LS35A 42LS33A 47LS35A 47LS33A 55LS35A 55LS33A
65LS33A
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 |
LICENSES |
30 |
- Viewing Photos |
|||
|
32 - Listening to Music |
|||||
|
|
|
||||
4 |
|
|
35 - Viewing the Contents List |
|||
ASSEMBLING AND |
|
|
|
|
||
|
PREPARING |
|
36 CUSTOMIZING SETTINGS |
|||
4 |
Accessories |
|
|
|
|
|
36 |
Accessing Main Menus |
|||||
5 |
Optional Accessories |
|||||
37 |
- PICTURE Settings |
|||||
6 |
Parts and Buttons |
|||||
40 |
- AUDIO Settings |
|||||
7 |
Connecting the Stand |
|||||
41 |
- TIME Settings |
|||||
8 |
Connecting the Speaker |
|||||
42 |
- OPTION Settings |
|||||
9 |
Using the IR Receiver |
|||||
43 |
- NETWORK Settings |
|||||
9 |
Portrait Layout |
|||||
|
|
|
|
|||
10 |
Mounting on a Wall |
|
45 TROUBLESHOOTING |
|
||
|
|
|
||||
12 REMOTE CONTROL |
|
47 SPECIFICATIONS |
||||
14 MAKING CONNECTIONS |
|
|||||
|
63 IR CODES |
|
||||
15 |
RGB Connection |
|
|
|||
|
|
|||||
16 |
HDMI Connection |
|
|
|
|
|
16 |
IR Receiver Connection |
|
64 CONTROLLING THE MULTIPLE |
|||
17 |
USB Connection |
|
||||
|
|
PRODUCT |
|
|||
17 |
LAN Connection |
|
|
|||
64 |
Connecting the Cable |
|||||
|
|
|||||
18 USING THE MONITOR |
64 |
RS-232C Configurations |
||||
64 |
Communication Parameter |
|||||
18 |
Using the Input List |
|||||
65 |
Command Reference List |
|||||
18 |
Adjusting Aspect Ratio |
67 |
Transmission / Receiving Protocol |
20 ENTERTAINMENT
20 Using the Network
20 - Connecting to a Network
22 - Network Status
22 Using the My Media
22 - Connecting USB storage devices
24 - Browsing Files
27 - Viewing Movies
LICENSES 3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
|
|
|
|
|
|
|
|
Power Cord |
D-sub 15-pin Signal Cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote Control and |
|
|
Batteries |
IR Receiver |
CD (Owner's Manual) |
|
||
|
|
/ Cards |
CAUTION
yyDo not use any unauthorized items to ensure the safety and product life span.
yyAny damages or injuries by using unauthorized items are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
yySuperSign software and manual.
-Downloading from the LG Electronics website.
-Visit the LG Electronics website (http://www.lgecommercial.com/supersign) and download the latest software for your model.
ASSEMBLING AND PREPARING 5
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories.
<![endif]>ENGLISH
|
Stand |
|
|
|
|
ST-321T |
32LS33A |
|
ST-421T |
42LS33A/ 42LS35A |
|
ST-471T |
47LS33A/ 47LS35A |
|
55LS33A/ 55LS35A |
||
|
||
ST-651T |
65LS33A |
Screws
Speaker |
Cable holder/ |
SP-2100 |
Cable Tie |
Screws |
Screws |
Diameter 4.0 mm x Pitch 0.7 mm |
Diameter 4.0 mm x Pitch |
Diameter 4.0 mm x |
x Length 14 mm (Included Spring |
0.7 mm x Length 8 mm |
Pitch 1.6 mm x Length |
Washer) |
(Included Spring Washer) |
10 mm |
Stand kit |
Speaker kit |
Media Player |
Screws |
CD (Owner's Manual)/ |
AN-WF500 |
MP500/ MP700 |
|
Cards |
|
|
|
Media Player kit |
|
Wi-Fi Dongle kit |
|
|
|
NOTE
yyCable holder/cable tie may not be available in some areas or for some models. yyOptional accessories are not included for all models.
6 ASSEMBLING AND PREPARING
<![endif]>ENGLISH
1 |
|
2 |
|
3 |
Connection Panel |
4 |
|
5 |
|
6 |
|
Screen Buttons
No. |
Description |
1Moves the selection up and down.
2Adjusts the volume level.
3Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
4Accesses the main menus, or saves your input and exits the menus.
5Changes the input source.
6Turns the power on or off.
- Only on some models.
1Place a soft cloth on the table and put the product with the screen facing downward.
2Use the screws to secure the stand on the rear side of the product as shown in the diagram.
ASSEMBLING AND PREPARING 7
<![if ! IE]><![endif]>ENGLISH
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
-Only on some models.
32LS33A
1Connect the input signal cable to the monitor before installing the speakers. Use a cable tie to organize the cables.
42LS33A 47LS33A 55LS33A 42LS35A 47LS35A 55LS35A 65LS33A
1Connect the input signal cable to the monitor before installing the speakers. Use a cable tie to organize the cables.
2 Mount the speaker by using a screw as shown |
2 Mount the speaker by using a screw as shown |
|
in the following. Make sure the power cable is |
||
in the following. Make sure the power cable is |
disconnected. |
|
disconnected. |
||
|
|
3 Then connect the speaker cable. After installing |
3 Then connect the speaker cable. After installing |
your speakers, use holders and cable ties to |
your speakers, use holders and cable ties to |
organize the speaker cables. |
organize the speaker cables. |
|
ASSEMBLING AND PREPARING 9
Using the IR Receiver |
Using the Kensington security system |
|
This allows a remote control sensor to be placed in a custom location. The IR receiver is made with a magnet. You can attach it to the monitor edge.
The Kensington security system connector is located at the back of the monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the monitor set and a table.
To install in portrait mode, rotate the set counterclockwise 90 degrees when looking at from the front.
NOTE
yyThe Kensington security system is optional. You can obtain additional accessories from most electronics stores.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
10 cm
10 cm
10 cm |
10 cm |
10 cm
If you intend to mount the monitor to a wall, attach a Wall mounting interface (optional parts) to the back of the set.
When you install the monitor using a wall mounting interface (optional parts), attach it carefully so it will not fall.
1Please, use a wall mount and screws in accordance with VESA Standards.
2If you use screws longer than standard, the monitor might be damaged internally.
3If you use improper screws, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for damage.
4Please use VESA standard as below.
yy785 mm or greater
*Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 12 mm
CAUTION
yyDisconnect the power cord first, and then move or install the monitor set. Otherwise electric shock may occur.
yyIf you install the monitor set on a ceiling or slanted wall, it may fall and result in severe injury.
yyUse an authorized LG wall mount and contact the local dealer or qualified personnel.
yyDo not overtighten the screws as this may cause damage to the monitor set and void your warranty.
yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
yyTo prevent injury, this apparatus must be securely attached to the wall in accordance with the instrallation instructions. (This pertains to Australia and New Zealand only.)
NOTE
yyThe wall mount kit includes an installation manual and necessary parts.
yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.
yyThe length of screws may differ depending upon the wall mount. Be sure to use the proper length.
yyFor more information, refer to the instructions supplied with the wall mount.
yyThe warranty will not cover any damages caused by using the product in an excessively dusty environment.
785 mm
ASSEMBLING AND PREPARING 11
Securing the product to a wall (optional) |
WARNING |
||
(Depending on model) |
|||
|
|||
|
brackets and bolts on the back of the product. |
or its controls. |
|
|
- If there are bolts inserted at the eye-bolts |
||
|
position, remove the bolts first. |
product is not positioned in a sufficiently |
|
|
|
stable location, it can be potentially |
|
|
|
hazardous due to falling. Many injuries, |
|
|
|
particularly to children, can be avoided by |
|
|
|
taking simple precautions such as: |
|
|
|
»» Using cabinets or stands recommended |
|
|
|
by the manufacturer of the product. |
|
|
|
»» Only using furniture that can safely |
|
|
|
support the product. |
|
|
|
»» Ensuring the product is not overhanging |
|
|
|
the edge of the supporting furniture. |
|
|
|
»» Not placing the product on tall furniture |
|
|
|
(for example, cupboards or bookcases) |
|
|
|
without anchoring both the furniture and |
|
|
|
the product to a suitable support. |
|
|
|
»» Not standing the product on cloth or other |
|
|
|
materials placed between the product |
|
|
|
and supporting furniture. |
|
1 |
Insert and tighten the eye-bolts, or product |
»» Educating children about the dangers of |
|
|
|
climbing on furniture to reach the product |
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear of the product.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
CAUTION
sure that children do not climb on or hang on the product.
NOTE
yyUse a platform or cabinet that is strong and large enough to support the product securely.
yyBrackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.
yyThe illustration shows a general example of installation and may look different from the actual product.
<![endif]>ENGLISH
<![endif]>ENGLISH
12 REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyMake sure to point the remote control to the remote control sensor on the monitor set.
(POWER)
Turns the monitor set on or off.
MONITOR ON
Turn on the monitor.
MONITOR OFF
Turn off the monitor.
1/a/A Button
Toggles between numerical and alphabetical.
ARC
Selects the Aspect Ratio
Mode.
Volume Up / Down
Adjusts the volume level.
PSM
Selects the Picture Status
Mode.
MUTE
Mutes all sounds.
ENERGY SAVING( )
Adjusts the brightness of the screen to reduce energy consumption.
INPUT
Selects the input mode.
3D
This button selection is not applicable.
Number and Alphabet buttons
Enters numerical or alphabetical characters depending on the setting.
CLEAR
Deletes the entered numerical or alphabetical character.
BRIGHTNESS Key
Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list.
REMOTE CONTROL 13
<![if ! IE]><![endif]>ENGLISH
INFO
Views the information of the currently program and the screen.
SETTINGS
Accesses the main menus or saves your input and exit menus.
OK
Selects menus or options and confirms your input.
BACK
Allows the user to move back one step in user interaction
function.
Allows you to control various multimedia devices simply by using the remote control through the SimpLink menu.
(It may not be supported depending on the model.)
ID ON/OFF
When the number of Picture ID is equal to Set ID you can control the monitor which you want in the multi display condition.
AUTO
Automatically adjusts picture position and minimizes image instability.(RGB input only)
W.BAL
This button selection is not applicable.
S.MENU
(SuperSign Menu Key)
This button does not apply to
this model.
Navigation Buttons
Scrolls through menus or options.
EXIT
Clears all on-screen displays and returns to Monitor set viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
<![endif]>ENGLISH
14 MAKING CONNECTIONS
Connect various external devices to the ports on the monitor set’s back panel.
1Find an external device you want to connect to your monitor set shown on the following illustration.
2Check the connection type of the external device.
3Go to the appropriate illustration and check the connection details.
HD Receiver |
DVD |
VCR |
||
|
|
|
|
|
|
|
|
|
|
HDMI |
HDMI |
HDMI |
Speaker |
USB |
PC |
|
Camcorder/Camera |
Gaming device |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RGB |
HDMI |
HDMI |
HDMI |
|
|
LAN |
|
|
NOTE
yyIf you connect a gaming device to the monitor set, use the cable supplied with the gaming device. yyIt is recommended you to use the optional speaker provided.
MAKING CONNECTIONS 15
|
Instructions for connecting to PC |
RGB Connection |
|
|
Your monitor supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for the monitor ; no extra software is needed.
NOTE
yyIt is recommended you use an HDMI connection for the best image quality.
yyUse a shielded signal interface cable, such as D-sub 15-pin signal cable and DVI/HDMI cable, with a ferrite core to maintain standard compliance for the product.
yyIf you turn the monitor set on when the set is cold, the screen may flicker. This is normal. yySome red, green, or blue spots may appear
on the screen. This is normal.
yyIf you use a cable longer than the D-sub 15pin signal cable provided, certain images may appear blurry.
Transmits an analog video signal from your PC to the monitor. Connect the PC and the monitor with the 15-pin signal cable as shown an following illustration. Select RGB input. To transmit an audio signal, connect an optional audio cable.
Back of the product.
Macintosh Adapter
(not included)
(not
included)
PC/MAC
CAUTION
yyConnect the signal input cable and tighten it by turning the screws clockwise.
yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.
yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.
NOTE
yyUse the standard
Macintosh adapter since an incompatible adapter is available in the market.
(Different signaling system)
yyApple computers may require an adapter to connect to this monitor. Call or visit their web site for more information.
<![endif]>ENGLISH
<![endif]>ENGLISH
16 MAKING CONNECTIONS
Transmits digital video and audio signals from your PC or external device to the monitor. Connect the PC or the external device and the Monitor using the HDMI cable as shown in the following diagrams. Select the HDMI input after connecting.
Allows the use of a wired remote or IR receiver extension.
Back of the product.
Back of the product.
(not included)
NOTE
yyUse a High Speed HDMI®/™ Cable. yyPlease check the PC environment if you
cannot hear audio in HDMI mode. Some PCs require you to manually change the default audio output to HDMI.
yyIf you want to use HDMI-PC mode, you must set the input label to PC mode.
yyWhen HDMI PC is used, a compatiblity problem might occur.
yyUse a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
yyRecommended HDMI cable types -High-Speed HDMI®/™ Cable -High-Speed HDMI®/™ Cable with Ethernet
NOTE
yyMake sure the power cable is disconnected.
MAKING CONNECTIONS 17
Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the monitor set and access the USB menu to use various multimedia files.
A Using a router (Switch)
Switch
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Monitor |
PC |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
or
B Using the Internet.
Network
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Monitor |
|
|
|
|
|
|
|
PC |
|
<![endif]>ENGLISH
<![endif]>ENGLISH
18 USING THE MONITOR
1Press INPUT to access the Input List.
2Press the navigation buttons to scroll to one of the input mode and press OK.
Input mode |
Description |
|
|
RGB |
View a PC display on the screen |
HDMI |
Watch contents in a PC, DVD |
|
of digital set-top box other high |
|
definition devices |
USB |
Plays the multimedia file saved in |
|
the USB. |
|
|
Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.
MODE |
RGB |
HDMI |
|
Aspect Ratio |
PC |
DTV |
PC |
16:9 |
o |
o |
o |
Just Scan |
x |
o |
x |
Set By Program |
x |
o |
x |
4:3 |
o |
o |
o |
Zoom |
x |
o |
x |
Cinema Zoom |
x |
o |
x |
NOTE
yyYou can also change the image size by accessing the main menus.
yyThe Just Scan mode operates when a video signal has resolution of 720p or higher.
CAUTION
yyIf a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.
yyIf you don't use your monitor, turn the power off or set a screen saver program from the PC or the system to prevent image retention.
yyIf the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
|
USING THE MONITOR 19 |
|
|
|
|
- 16:9 This selection will allow you to adjust the |
- 4:3 This selection will allow you to view a picture |
|
picture horizontally, in linear proportion, to fill the |
with an original 4:3 aspect ratio, black bars will |
|
entire screen (useful for viewing 4:3 formatted |
appear on both the left and right of the screen. |
|
DVDs). |
|
|
-Just Scan This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.
-Zoom This selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
JustScan
- Set By Program Depending on the input signal, |
- Cinema Zoom Choose Cinema Zoom when you |
screen aspect ratio changes to 4:3 or 16:9. |
want to enlarge the picture in correct proportion. |
|
Note: When enlarging or reducing the picture, |
|
the image may become distorted. |
<![endif]>ENGLISH
Set ByProgram
<![endif]>ENGLISH
20 ENTERTAINMENT
For wired network connections, connect the display to a local area network (LAN) via the LAN port as shown on the following diagram. Then, set up the network settings. For wireless network connections, connect the Wi-Fi USB module to the USB port. Then, set up the network settings.
After making a physical connection, a small number of home networks may require the display network settings to be adjusted. For most home networks, the display will connect to automatically without any adjustments.
For detail information, contact your internet provider or router manual.
WAN
Router
@ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
ETHERNET |
|||||
|
|
|
|
|
|
|||||
|
|
|
Cable modem |
|
|
|
||||
Internet |
||||||||||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
CAUTION
yyDo not connect a modular phone cable to the LAN port.
yySince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.
To set up the network settings: (Even if your display has already connected automatically, running setup again will not harm anything),
Connecting to a wired network
1Press SETTINGS to access the main menus.
2Press the navigation buttons to scroll to NETWORK and press OK.
3Press the navigation buttons to select Network Setting and press OK.
4If you already set network setting, select Resetting. The new connection settings resets the current network settings.
5Select IP Auto Setting or IP Manual Setting.
-IP Manual Setting
press the navigation and number buttons. IP addresses will need to be input manually.
-IP Auto Setting
Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the display will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined.
6When you are finished, press EXIT.
|
|
|
|
|
|
|
|
ENTERTAINMENT 21 |
||
|
|
|
|
|
|
|
|
|||
|
Connecting to a wireless network |
|
|
Tips for Network setting |
|
|||||
1 Press SETTINGS to access the main menus. |
yyUse a standard LAN cable with this display. |
|||||||||
2 Press the navigation buttons to scroll to NET- |
|
Cat5 or better with a RJ45 connector. |
||||||||
yyMany network connection problems during set |
||||||||||
|
WORK and press OK. |
|
up can often be fixed by re-setting the router |
|||||||
3 Press the navigation buttons to select Network |
|
or modem. After connecting the display to the |
||||||||
|
home network, quickly power off and/or discon- |
|||||||||
|
Setting and press OK. |
|
||||||||
|
|
nect the power cable of the home network |
||||||||
4 Select Setting from the AP list or Simple |
|
|||||||||
|
router or cable modem. Then power on and/or |
|||||||||
|
setting (WPS-button mode). |
|
connect the power cable again. |
|||||||
|
-Setting from the AP list |
yyDepending on the internet service provider |
||||||||
|
Select an AP to connect to a wireless network. |
|
(ISP), the number of devices that can receive |
|||||||
|
-Simple setting (WPS-button mode) |
|
internet service may be limited by the applica- |
|||||||
|
Press the button on the wireless router that |
|
ble terms of service. For details, contact your |
|||||||
|
supports PBC to easily connect to the router. |
|
ISP. |
|||||||
5 When you are finished, press EXIT. |
yyLG is not responsible for any malfunction of the |
|||||||||
|
display and/or the internet connection feature |
|||||||||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
due to communication errors/malfunctions as- |
|||
|
|
|
|
|
|
|
sociated with your internet connection, or other |
|||
|
|
CAUTION |
||||||||
|
|
|
|
|
|
|
connected equipment. |
|||
yyNetwork setting menu will not be avail- |
||||||||||
yyLG is not responsible for problems within your |
||||||||||
|
able until the display connected to physical |
|||||||||
|
|
internet connection. |
||||||||
|
network. |
|
||||||||
|
yyYou may experience undesired results if the |
|||||||||
yySince there are various connection meth- |
||||||||||
|
network connection speed does not meet the |
|||||||||
|
ods, please follow the specifications of your |
|
||||||||
|
|
requirements of the content being accessed. |
||||||||
|
telecommunication carrier or internet service |
|
||||||||
|
yySome internet connection operations may not |
|||||||||
|
provider. |
|||||||||
|
|
be possible due to certain restrictions set by |
||||||||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
the Internet service provider (ISP) supplying |
|||
|
|
|
|
|
|
|
your Internet connection. |
|||
|
|
|
|
|
|
yyAny fees charged by an ISP including, without |
||||
|
|
|
|
|
|
|||||
|
|
NOTE |
|
|
limitation, connection charges are your respon- |
|||||
|
|
want to access the Internet directly on |
|
sibility. |
||||||
|
|
|||||||||
|
your display, the Internet connection should |
yyA 10 Base-T or 100 Base-TX LAN port is |
||||||||
|
always be on. |
|
required when using a wired connection to this |
|||||||
yyIf you cannot access the Internet, check |
|
display. If your internet service does not allow |
||||||||
|
the network conditions from a PC on your |
|
for such a connection, you will not be able to |
|||||||
|
network. |
|
connect the display. |
|||||||
yyWhen you use Network Setting, check the |
yyA DSL modem is required to use DSL service |
|||||||||
|
LAN cable or check if DHCP in the router is |
|
and a cable modem is required to use cable |
|||||||
|
turned on. |
|
modem service. Depending on the access |
|||||||
yyIf you do not complete the network settings, |
|
method of and subscriber agreement with your |
||||||||
|
the network may not work properly. |
|
ISP, you may not be able to use the internet |
|||||||
|
|
|
|
|
|
|
connection feature contained in this display or |
|||
|
|
|
|
|
|
|
you may be limited to the number of devices |
|||
|
|
|
|
|
|
|
you can connect at the same time. (If your ISP |
|||
|
|
|
|
|
|
|
limits sub scription to one device, this display |
|||
|
|
|
|
|
|
|
may not be allowed to connect when a PC is |
|||
|
|
|
|
|
|
|
already connected.) |
|||
|
|
|
|
|
|
yyThe use of a router may not be allowed or its |
||||
|
|
|
|
|
|
|
usage may be limited depending on the poli- |
|||
|
|
|
|
|
|
|
cies and restrictions of your ISP. For details, |
|||
|
|
|
|
|
|
|
contact your ISP directly. |
<![endif]>ENGLISH
<![endif]>ENGLISH
22 ENTERTAINMENT
Tips for Wireless Network Setting
yyWireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices.
yyThe surrounding wireless environment can cause the wireless network service to run slowly.
yyFor an AP connection, an access point device that supports wireless connection is required and the wireless connection feature must be enabled on the device. Contact your service provider regarding availability of wireless connection on your access point.
yyCheck the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation for SSID and security settings of the AP.
yyInvalid settings on network devices (wired/wireless line sharer, hub) can cause the monitor to run slowly or not operate properly. Install the devices correctly according to the appropriate manual and set the network.
yyConnection method may differ according to the AP manufacturer.
Connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features.
Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My Media screen appears.
or
1Press SETTINGS to access the main menus.
2Press the navigation buttons to scroll to NETWORK and press OK.
3Press the navigation buttons to select Network Status.
4Press OK to check the network status.
5When you are finished, press EXIT.
Option |
Description |
|
Setting |
Return to the network setting menu. |
|
Test |
Test the current network status after set- |
|
ting the network. |
||
|
||
Close |
Return to the previous menu. |
CAUTION
yyDo not turn the display off or remove a USB storage device while MY MEDIA menu is activated, as this could result in loss of files or damage to the USB storage device.
yyBack up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty.
ENTERTAINMENT 23
Tips for using USB storage devices
yyOnly a USB storage device is recognizable. yyIf the USB storage device is connected
through a USB hub, the device is not recognizable.
yyA USB storage device using an automatic recognition program may not be recognized.
yyA USB storage device which uses its own driver will not be recognized.
yyThe recognition speed of a USB storage device may depend on each device.
yyPlease do not turn off the display or unplug the USB device when the connected USB storage device is working. When such a device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
yyPlease do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction. Only use a USB storage device which has normal music files, image files
or movie files.
yyPlease use only a USB storage device which was formatted as a FAT32 file system, NTFS file system by with the Windows operating system. In case of a storage device formatted with a different utility programme which is not supported by Windows, it may not be recognized.
yyPlease connect power to a USB storage device (over 0.5 A) which requires an external power supply. If not, the device may not be recognized.
yyPlease connect a USB storage device with the cable included by the device maker. yySome USB storage devices may not be sup-
ported or operate smoothly.
yyFile alignment method of USB storage devices is similar to Window XP and the monitor can recognize up to 100 English characters. yyBe sure to back up important files since data stored on a USB memory device may be damaged. We will not be responsible for any
data loss.
yyIf the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source.
-Please use a power adaptor for an external power source.
yyIf your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.
yyIf a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
yyIf the USB memory device does not work properly, disconnect and reconnect it.
yyHow fast a USB memory device is detected differs from device to device.
yyIf the USB is connected in Standby Mode, that drive will automatically be loaded when the display is turned on.
yyThe recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.
yyAny device with more than the recommended capacity may not work properly.
yyIf a USB external hard disk with a Energy Saving function does not work, turn the hard disk off and on again to make it work properly.
yyUSB storage devices below USB 2.0 are supported as well. But they may not work properly with videos.
yyA maximum of 999 folders or files can be recognized under one folder.
yyIt is recommended you use a certified USB storage device and cable. Otherwise, a USB storage device may not be detected or a playback error may occur.
yyOnly a USB memory device can be used to play back the files distributed and stored by SuperSign Manager. A USB hard disk or multi-card reader will not work.
yyOnly an FAT 32 file formatted storage device can play back the files distributed and stored by SuperSign manager.
yyA USB 3.0 storage device may not work.
<![endif]>ENGLISH
<![endif]>ENGLISH
24 ENTERTAINMENT
Browse files saved in a USB storage device.
1Press SETTINGS to access the main menu.
2Press the search button to scroll to MY MEDIA and press OK.
3Press the Search button to go to the Movie List, Photo List, Music List, or Content List that you want, and press OK.
|
|
|
Page 1/1 |
PAGE |
Page Change |
||||
All Media |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
USB - |
|
|
|
|
|
|
|
|
|
All Media |
Movie List Photo List |
Music List |
Contents List |
|
|
|
Page 1/1 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Page 1/1 |
PAGE |
Page Change |
||||
All Media |
|
|
|
|
|
||||
1 |
|
|
|
|
|
|
|
|
|
USB - |
|
|
|
|
|
|
|
|
|
|
Drive1 |
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
Page 1/1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
001 |
002 |
003 |
|
|
|
004 |
|
||
005 |
006 |
007 |
|
|
|
008 |
|
||
009 |
010 |
011 |
|
|
|
012 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5
No. |
Description |
|
Returns to the previous level. |
|
Current page/total pages of the folder above |
|
Lower item of |
|
Current page/total pages of |
|
Remote control button |