LG 32LK310, 32LK311 Owner’s Manual

User’s’s Guidei Specificationifi ti
1. Model Description
MODEL	22/26/32LK310-TA	BRAND	LG	Part No.	MFL63720129
SUFFIX	FT	Product Name	22/26/32LK310		(1108-REV00)

2. Printing Specification

1.Trim Size (Format) : 185mm x 260 mm

2.Printing Colors

•Cover : 1 COLOR (BLACK)

•Inside : 1 COLOR (BLACK)

3.Stock (Paper)

•Cover : Coated paper , Snow White 150 g/

•Inside : Uncoated paper , 60 g/

4.Printing Method : Off-set

5.Bindery : Perfect bind

6.Language : English, French, Portuguese, Arabic (4)

7.Number of pages : 112

“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

NDetails should be followed Eco-SCM management standard[LG(56)-A-2524].

OEspecially, Part should be followed and controlled the following specification.

T(1)Eco-hazardous substances test report should be submitted

Ewhen Part certification test and First Mass Production.

S(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

3. Special Instructions

(1) Origin Notification

* LGEIN : Printed in Indonesia	* LGEWA : Printed in U.K.
* LGESP : Printed in Brazil	* LGEMX : Printed in Mexico
* LGEND : Printed in China	* LGEIL : Printed in India
* LGEMA : Printed in Poland
4. Changes

10
9
8
7
6
5
4
3
2
1
REVNO.. MM/DD/YY SIGNATURE CHANGE NO.	CHANGE CONTENTS

LG(EN)

Front cover

P/no

LG(FR)

Front cover

LG(POR)

Front cover

LG(ARA)

Back cover

Paginationi ti sheett

2	…		…	…

2	…		…	…

2	…		…	…

BLANK	26		…	…

P/NO. MFL63720129

Total pages : 112 pages

LG(EN)

Back cover

26 BLANK

LG(FR)

Back cover

26 BLANK

LG(POR)

Back cover

26 BLANK

LG(ARA)

Front cover

…2

OWNER’S MANUAL

LCD TV / LED LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

P/NO: MFL63720129(1108-REV00)	www.lg.com
Printed in China

Safety Instructions

<![if ! IE]>

<![endif]>ENGLISH

•Please read these safety precautions carefully before using the product.

•In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.

warning	If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
caution	If you ignore the caution message, you may be slightly injured or the product may be damaged.

Precaution in Installing the Product

warning

Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or deformation may occur.

Do not use the product in damp place such as

a bathroom or any place where it is likely to get

wet.

-This may cause a fire or could give an electric shock.

If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.

- If you continue to use without taking proper measures, electrical shock or fire can occur.

caution

Install the product on a flat and stable place that has no risk of dropping the product.

- If the product is dropped, you may be injured or the product may be broken.

Keep the product away from direct sunlight. - The product can be damaged.

Do not place the product in a built-in installation such as bookcase or rack.

- Ventilation required.

ElectricalPowerRelatedPrecautions

warning

Make sure to connect the power cable to the

grounded current.

- You may be electrocuted or injured.

Do not touch the power plug with wet hands.

Additionally, it the cord pin is wet or covered

with dust, dry the power plug completely or

wipe dust off.

- You may be electrocuted due to excess moisture.

During a thunder or lightning storm, unplug the power cable or signal cable.

- You may be electrocuted or a fire can break out.

caution

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

Precautions in Moving the Product

warning

Make sure to turn off the product.

Make sure to remove all cables before mov- ing the product.

- You may be electrocuted or the product can be damaged.

caution

Do not shock the product when moving it.

- You may be electrocuted or the product can be damaged.

Make the panel face forward and hold it with both hands to move.

- If you drop the product, the damaged product can cause electric shock or fire.

Contact with the service center for repair.

Precautions in Using the Product

warning

Do not disassemble, repair or modify the

product at your own discretion. - Fire or electric shock accident can occur.

- Contact the service center for check, calibration or repair.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TELEVISION SCREEN

-When a fixed image (e.g. logos, screen menus, video game, computer display and teletext pages) is displayed on the television for an extended period it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or

“burn-in”. Image burn is not covered under the manufacturer’s warranty.

-In order to prevent image burn, avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

-Image burn can also occur on the letterboxed areas of your television if you use the 4:3 aspect ratio setting for an extended period.

2

Preparation

Connecting your Unit

■ Image shown may differ from your TV.

	VIDEO L(MONO) AUDIO	R	<![if ! IE]> <![endif]>IN
			<![if ! IE]> <![endif]>AV

2VCR CONNECTION

<![if ! IE]>

<![endif]>ENGLISH

			RS-232C IN
			(CONTROL)
			RGB IN (PC)	AUDIO IN
		2			<![if ! IE]> <![endif]>1
				(RGB/DVI)
			L - AUDIO OUT - R	VIDEO L(MONO) AUDIO R	<![if ! IE]> <![endif]>IN
		1			<![if ! IE]> <![endif]>AV
3	Power Cord		/DVI IN
			VIDEO	AUDIO	ANTENNA
					IN
			COMPONENT IN
			1	Antenna Connection

VIDEO

AUDIO

COMPONENT IN

2DVD/STB

* To connect an additional equipment, see the External Equipment Setup section in CD Manual.

3

<![if ! IE]>

<![endif]>ENGLISH

Preparation

Accessories

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

■ Image shown may differ from your TV.

This item is not included for all models.

	Owner’s Manual
	Power Cord		Batteries
	(Except 32LV2***,
		Remote Control	(AAA)
	32/42LV3***)

Polishing Cloth Polishing cloth for use on the screen.

* Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.

Do not use excessive force. This may cause scratching or discolouration.

Only 26/32LK3**, 32/42LK4**

			x 8
	1-screw for stand fixing	Cable Holder	M4 x 20
	(Only 26/32LK3**, 32/42LK4**,	(Only 22LK3**,
			Bolts for stand
	32LV2***, 32LV3***)	19/22/26LV2***)	assembly

or

Protection cover

	Only 22LK3**	Only 19/22/26LV2***		Only 32LV2***	Only32/42LV3***
		x 2		x 8	x 8
	Protection cover	M4 x 16		M4 x 14	M4 x 12
		Bolts for stand AC/DC Adaptor		Bolts for stand	Bolts for stand
		assembly		assembly	assembly
		Wall Mounting Bracket (Separate purchase)
	LSW100B or LSW100BG		LSW200B or LSW200BG	LSW400BX or LSW400BXG

(19/22/26/32LV2***,

22/26/32LK3**, 32LK4**, (42LK4**) (42LV3***) 32LV3***)

4

Front panel controls

! NOTE

►The► energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

CAUTION

►Do► not step on the glass stand or subject it to any impact.

It may break, causing possible injury from fragments of glass, or the TV may fall. ►Do► not drag the TV. The floor or the product may be damaged.

■ Image shown may differ from your TV.

Only 22/26/32LK3**

Only 22LK3**

POWER INPUT	HOME	OK	VOLUME	PROGRAMME

INPUT HOME OK

P

Only 26/32LK3**

SPEAKER

Remote Control Sensor

Power/Standby Indicator

(Can be adjusted using the Power Indicator in the OPTION menu.)

PPROGRAMME

VOLUME

OK

OK

HOME

HOME

INPUT

INPUT

POWER

<![if ! IE]>

<![endif]>ENGLISH

5

<![if ! IE]>

<![endif]>ENGLISH

Preparation

Front panel controls

■ Image shown may differ from your TV.

Only 32/42LK4**

P	PROGRAMME
	VOLUME
OK
SPEAKER	OK
HOME
	HOME
INPUT	INPUT
Remote Control Sensor	POWER

Power/Standby Indicator

(Can be adjusted using the Power Indicator in the OPTION menu.)

6

■ Image shown may differ from your TV.

Only 19/22/26/32LV2***

<![if ! IE]>

<![endif]>ENGLISH

PROGRAMME

VOLUME

OK

HOME

INPUT

POWER

Touch Sensor

• You can use the desired				Remote Control Sensor
button function by
touching.

Power/Standby Indicator

(Can be adjusted using the Power Indicator in the OPTION menu.)

7

Preparation

<![if ! IE]>

<![endif]>ENGLISH

■ Image shown may differ from your TV.

Only 32/42LV3***

PROGRAMME

P

VOLUME

	OK
	OK
SPEAKER	HOME
	HOME
	INPUT
	INPUT

POWER

Remote Control Sensor

Power/Standby Indicator

(Can be adjusted using the Power Indicator in the OPTION menu.)

8

Back panel information

■ Image shown may differ from your TV.

Only 22LK3**

Only 26/32LK3**

10

	10
1	7

						1
											AV IN2
2	4	3	5	6	7	2	4	3	5	6	7

8

9

8

9

1

Power Cord Socket

6

RGB/DVIAudio Input

This TV operates on anAC power. The voltage is

Connect the audio from a PC.

indicated on the Specifications page. Never

attempt to operate the TV on DC power.

7

Audio/Video Input

HDMI Input

Connect audio/video output from an external

2

device to these jacks.

Connect an HDMI signal to HDMI IN.

Component Input

Or DVI(VIDEO)signal to HDMI/DVI port with DVI

8

to HDMI cable.

Connectacomponentvideo/audiodevicetothese

RS-232C Input (CONTROL&SERVICE) Port

jacks.

3

Antenna Input

Connect to the RS-232C port on a PC.

9

This port is used for Service or Hotel mode.

Connect RF antenna to this jack.

4

RGB Input

10

USB Input

Connect the output from a PC.

Connect USB storage device to this jack.

5Audio Output

Connect an external amplifier or add a subwoofer to your surround sound system.

<![if ! IE]>

<![endif]>ENGLISH

9

Preparation

<![if ! IE]>

<![endif]>ENGLISH

■ Image shown may differ from your TV.

Only 32/42LK4**

10

2

1

2	3	6	4	7	8
			<![if ! IE]> <![endif]>T
			<![if ! IE]> <![endif]>OU
	2	(DVI)
			5		9

1	Power Cord Socket	6	RGB/DVIAudio Input
	This TV operates on anAC power. The voltage is		Connect the audio from a PC.
	indicated on the Specifications page. Never
	attempt to operate the TV on DC power.	7	Audio/Video Input
	HDMI Input		Connect audio/video output from an external
2			device to these jacks.
	Connect an HDMI signal to HDMI IN.		Component Input
	Or DVI(VIDEO)signal to HDMI/DVI port with DVI	8
	to HDMI cable.		Connectacomponentvideo/audiodevicetothese
	RGB Input		jacks.
3			Antenna Input
	Connect the output from a PC.	9
	RS-232C Input (CONTROL&SERVICE) Port		Connect RF antenna to this jack.
4			USB Input
	Connect to the RS-232C port on a PC.	10
	This port is used for Service or Hotel mode.		Connect USB storage device to this jack.

5Audio Output

Connect an external amplifier or add a subwoofer to your surround sound system.

10

Back panel information

■ Image shown may differ from your TV.

Only 19/22/26LV2***

Only 32LV2***

9

1	10	2	5	3	6	7
	DC-IN
		2	(DVI)
					4	8

					9
					1
1	2	5	3	6	7
	2	(DVI)
				4	8

1	HDMI Input	6	Audio/Video Input
	Connect an HDMI signal to HDMI IN.		Connect audio/video output from an external
	Or DVI(VIDEO)signal to HDMI/DVI port with DVI		device to these jacks.
	to HDMI cable.	7	Component Input
	RGB Input
2			Connectacomponentvideo/audiodevicetothese
	Connect the output from a PC.		jacks.
3	RS-232C Input (CONTROL&SERVICE) Port	8	Antenna Input
	Connect to the RS-232C port on a PC.		Connect RF antenna to this jack.
	This port is used for Service or Hotel mode.	9	USB Input
4	Audio Output		Connect USB storage device to this jack.
	Connect an external amplifier or add a subwoofer	10	DC ADAPTER PORT
	to your surround sound system.
			Connect to the power cord socket.

5RGB/DVIAudio Input

Connect the audio from a PC.

<![if ! IE]>

<![endif]>ENGLISH

11

<![if ! IE]>

<![endif]>ENGLISH

Preparation

■ Image shown may differ from your TV.

Only 32/42LV3***

					9
1	2	5	3	6	7
	2	(DVI)
				4	8

1	HDMI Input	6	Audio/Video Input
	Connect an HDMI signal to HDMI IN.		Connect audio/video output from an external
	Or DVI(VIDEO)signal to HDMI/DVI port with DVI		device to these jacks.
	to HDMI cable.	7	Component Input
	RGB Input
2			Connectacomponentvideo/audiodevicetothese
	Connect the output from a PC.		jacks.
3	RS-232C Input (CONTROL&SERVICE) Port	8	Antenna Input
	Connect to the RS-232C port on a PC.		Connect RF antenna to this jack.
	This port is used for Service or Hotel mode.	9	USB Input
4	Audio Output		Connect USB storage device to this jack.
	Connect an external amplifier or add a subwoofer
	to your surround sound system.

5RGB/DVIAudio Input

Connect the audio from a PC.

12

Stand installation

■ ■ Image shown may differ from your TV.	<![if ! IE]> <![endif]>ENGLISH
■ ■ When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the
bolt can deviate from abrasion of the tightening part of the bolt.

Only 22LK3**

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Only 26/32LK3**, 32/42LK4**

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2	Assemble the parts of the Stand Body with
2 Assemble the TV as shown.	the Stand Base of the TV
	Stand Body
	M4 x 20
	Stand Base
3	Assemble the TV as shown.

4	Fix the 4 bolts securely using the holes in the
	back of the TV.

M4 x 20

13

<![if ! IE]>

<![endif]>ENGLISH

Preparation

Stand installation

Only 19/22/26LV2***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Assemble the parts of the Stand Body with the Stand Base of the TV

Only 32LV2***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Assemble the parts of the Stand Body with the Stand Base of the TV

Stand Body	Stand Body
	M4 x 14
Stand Base	Stand Base
3 Assemble the TV as shown.	3 Assemble the TV as shown.

4	Fix the 2 bolts securely using the holes in the	4	Fix the 4 bolts securely using the holes in the
	back of the TV.		back of the TV.

M4 x

M4 x 14

14

Only 22LK3**

Gather and bind the cables with the on the TV back cover.

Cable Holder

After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.

Cable Holder

Only 19/22/26LV2***

After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.

Cable Holder

Only 32LV2***

Only 32/42LV3***

Back Cover for Wire

Carefully place the TV screen side down on a Arrangement cushioned surface to protect the screen from ■ Image shown may differ from your TV. damage.

1

2Assemble the parts of the Stand Body with the Stand Base of the TV

M4 x 12	Stand Body

Stand Base

3Assemble the TV as shown.

4Fix the 4 bolts securely using the holes in the back of the TV.

M4 x 12

<![if ! IE]>

<![endif]>ENGLISH

Cable Holder

15

Preparation

<![if ! IE]>

<![endif]>ENGLISH

Only 26/32LK3**, 32/42LK4**

1Connect the cables as necessary.

To connect additional equipment, see the

External Equipment Setup section.

2Open the Cable Management Clip as shown and manage the cables.

Cable Management Clip

3Fit the Cable Management Clip as shown.

! NOTE

►Do► not use the Cable Management Clip to lift theTV.

-If the TV is dropped, you may be injured or the TV may be damaged.

Only 32/42LV3***

After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.

Cable Holder

16

Not using the desktype stand

■■ Image shown may differ from your TV.

When installing the wall-mounted unit,use the protection cover.

Only 22LK3**

Only 26/32LK3**, 32/42LK4**

Insert the Protection Cover into the TV until clicking sound.

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2 Loose the bolts from TV.

3Detach the Stand from TV.

Protection Cover

Swivel stand

(Only 26/32LK3**, 32/42LK4**, 32/42LV3***)

■Image shown may differ from your TV.

■This feature is not available for all models.

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

4After removing the protection paper from the protection cover, adhere it to the TV as shown.

Protection Cover

POSITIONING YOUR

DISPLAY (Only 22LK3**)

■ Image shown may differ from your TV.

Adjust the position of the panel in various ways for maximum comfort.

• Tilt range

<![if ! IE]>

<![endif]>ENGLISH

17

<![if ! IE]>

<![endif]>ENGLISH

Preparation

ATTACHING THE TV TO A DESK

(Only 26/32LK3**, 32/42LK4**, 32LV2***, 32LV3***)

■Image shown may differ from your TV.

■This feature is not available for all models.

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

1-Screw (provided as parts of the product) Stand

Careful installation advice

■You should purchase necessary components to fix the TV safety and secure to the wall from the market.

■Position the TV close to the wall to avoid the possibility of it falling when pushed.

■The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

11

22

Desk

WARNING

►To► prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

Connection of TV

(Only 19/22/26LV2***)

■■ Image shown may differ from your TV.

1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If yourTV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2Securethewallbracketswiththeboltsonthewall.Match the height of the bracket that is mounted on the wall.

3

3Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

AC/DC Adaptor

1Connect the antenna cable to the antenna input port on the TV.

2Connect the AC/DC adapter plug to the power input jack on the TV.

3Connect the power cord to the AC/DC adapter first, then plug the power cord into the wall power outlet.

! NOTE

►When► moving the TV undo the cords first.

►Use► a platform or cabinet strong and large enough to support the size and weight of the TV.

►To► use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

18

Earthing

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

	10 cm
	10 cm
10 cm	10 cm
	10 cm

Power Supply

Circuit breaker

■The TV can be installed in various ways such as on a wall, or on a desktop etc.

■The TV is designed to be mounted horizontally.

Desktop Pedestal Installation

For adequate ventilation allow a clearande of 10 cm (4 Inches) all around the TV.

10 cm

10 cm

10 cm

10 cm

NOTE

►►ShouldInstallwallmountonasolidwallperpendicular to the floor.

►►Should use a special wall mount, if you want to install it to ceiling or slanted wall.

►►The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.

►►Installing screw type and length depends on the wall mountused.Furtherinformation,refertotheinstructions included with the mount.

►►LGisnotliableforanyaccidentsordamagetoproperty or TV due to incorrect installation:

-Where a non-compliant VESA wall mount is used.

-I Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury

-Not following the recommended Installation method.

A

B

			Model	VESA		Standard	Quantity
				(A	* B)	Screw
			22LK3**	100 *100		M4	4
	Wall Mount :		26LK3**	200 *100		M4	4
			32LK3**	200 * 100		M4	4
	Horizontalinstallation		42LK4**	200	*200	M6	4
			32LK4**	200	*100	M4	4
	■■ WerecommendtheuseofaLGBrandwallmounting
			19LV2***	100 *100		M4	4
	bracket when mounting the TV to a wall.
			22LV2***	100 *100		M4	4
	■■ We recommend that you purchase a wall mounting
			26LV2***	100 *100		M4	4
	bracket which supports VESAstandard.
	■■ LG recommends that wall mounting be performed		32LV2***	200 *100		M4	4
	by a qualified professional installer.
			32LV3***	200 *100		M4	4
			42LV3***	400 *400		M4	4

<![if ! IE]>

<![endif]>ENGLISH

19

<![if ! IE]>

<![endif]>ENGLISH

Preparation

■■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.

Antenna Connection

■■For optimum picture quality, adjust antenna direction.

■■An antenna cable and converter are not supplied.

Multi-family Dwellings/Apartments

Wall (Connect to wall antenna socket)

Antenna

Socket

ANTENNA

IN

RF Coaxial Wire (75 Ω)

Outdoor

Antenna

(VHF, UHF) Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Antenna	UHF
	Signal
	Amplifier	ANTENNA
	VHF	IN

■■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.

■■If signal needs to be split for two TVs, use an antenna signal splitter for connection.

20

Watching TV / Programme control

Remote control key function

■ Image shown may differ from your TV.

When using the remote control, aim it at the remote control sensor on the TV.

1 POWER

Switches the TV on from standby or off to standby.

1	5	2	volume up / down
			Adjusts the volume.

3 Home

Select a menu.

Clears all on-screen displays and returns to TV viewing from any menu.

		6	4	thumbstick(Up / Down / Left / Right)
				Allows you to navigate the on-screen menus and adjust the
2		7		system settings to your preference.
				ok
3				Accepts your selection or displays the current mode.
	Home	8	5	input
				External input mode rotate in regular sequence.
4				Switches the TV on from standby.
			6 q. view
				Returns to the previously viewed programme.

7 programme up/down

Selects a programme.

8q. menu

Select the desired quick menu source.

Installing Batteries

■Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -).

■Install two 1.5 V AAA batteries. Do not mix old or used batteries with new ones.

■Close cover.

■To remove the batteries, perform the installation a actions in reverse

<![if ! IE]>

<![endif]>ENGLISH

21

<![if ! IE]>

<![endif]>ENGLISH

Watching TV / Programme control

Turning on the TV

-When your TV is turned on, you will be able to use its features.

1 Firstly, connect the power cord correctly.

At this stage, the TV switches to standby mode.

2In standby mode to turn TV on, press the/ I, INPUT or Pbutton on the TV or press the POWER, INPUT, Por NUMBER button on the remote control and the TV will switch on.

Initializing Setup

1If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Mode Setting, Auto Tuning.

Note:

a.If you close without completing the initial setting, the Initial Setting menu can be displayed again. b.“Store Demo” mode is only for shop display and not for general customer use.

c."Home Use” mode is the optimal setting for home environments, and is the TV's default mode. d."Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, “Store Demo” mode initializes the product to the image quality set by us after a certain period of time.

e.Themode(HomeUse,StoreDemo)canbechangedbyexecuting ModeSettingintheOPTIONmenu.

When connecting a USB device

When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu is activated. In USB device, you can not add a new folder or delete the existing folder.

■ Image shown may differ from your TV.

1 Connect the USB device to the USB IN
					• This TV Supports on JPEG and MP3 and SD
jack on the TV.					DivX.

USB memory stick

2Select PHOTO LIST, MUSIC LIST or MOVIE LIST.

PHOTO LIST

MUSIC LIST

MOVIE LIST

When removing the USB device

Select the USB Device menu before removing the USB device.

Select Eject.

22

On Screen Menus Selection and adjustment

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. ■ Image shown may differ from your TV.

SETUP

Move

OK

PICTURE

Move

OK

AUDIO

Move

OK

Auto Tuning

Aspect Ratio

: 16:9

Auto Volume

: Off

Manual Tuning

Energy Saving

: Off

Clear Voice II

: Off

Programme Edit

Picture Mode

: Vivid

• Level

3

-

+

• Backlight

100

Balance

0

L

R

• Contrast

100

Sound Mode

: Standard

• Brightness

50

• Infinite Surround

: Off

• Sharpness

70

• Treble

50

• Colour

70

• Bass

50

▼

▼

SETUP

PICTURE

AUDIO

TIME

OPTION

USB

TIME

USB

Move

OK

OPTION

Move

OK

Move

OK

Clock

Menu Language

: English

Photo List

Off Time

: Off

Input Label

Music List

On Time

: Off

SIMPLINK

: On

Movie List

Sleep Timer

: Off

Key Lock

: Off

DivX Reg. Code

Set ID

: 1

Deactivation

Power Indicator

Demo Mode

: Off

Mode Setting

: Home Use

▼

Display each menu.

Select a menu item.

3

Move to the pop up menu.

•Press the Home/EXIT button to return to normal TV viewing.

•Press the BACK button to move to the previous menu screen.

<![if ! IE]>

<![endif]>ENGLISH

23

<![if ! IE]>

<![endif]>ENGLISH

Watching TV / Programme control

Auto programme tuning

Use this to automatically find and store all available programmes.

When you start auto programming, all previously stored service information will be deleted.

		SETUP	Move	OK			SETUP		Move	OK
		to	i					Auto Tuning
		Auto Tuning
		Manual Tuning						Manual Tuning
		Programme Edit						Programme Edit
									Check your antenna connection. The
									previous channel information will be
									updated during Auto Tuning.

Yes No

Select SETUP.

Select Auto Tuning.

Select Yes.

Run Auto tuning.

•If you wish to keep on auto tuning select Yes using the < >button. Then, press the OK button. Otherwise select No.

•Press the Home/EXIT button to return to normal TV viewing.

•Press the BACK button to move to the previous menu screen.

Maintenance

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

1A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.

2Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

■■To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

■■Do not to use a wet cloth.

Extended Absence

CAUTION

►If► you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges.

24

appendix

Troubleshooting

The TV does not operate properly.

The remote control does not work

Power is suddenly turned off

■■Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV.

■■Ensure that the batteries are installed with correct polarity (+ to +, - to -).

■■Install new batteries.

■■Is the sleep timer set?

■■Check the power control settings. Has the Power supply been interrupted.

■■If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.

The video function does not work.

No picture & No sound

Picture appears slowly after switching on

No or poor colour or poor picture

Horizontal/vertical bars or picture shaking

Poor reception on some channels

Lines or streaks in pictures

No picture when connecting HDMI

■■Check whether the TV is switched on.

■■Try another channel. The problem may be with the broadcast.

■■Is the power cord inserted correctly into the mains?

■■Check your antenna direction and/or location.

■■Test the mains outlet by plugging another TV into the same outlet.

■■This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.

■■Adjust Colour in menu option.

■■Allow a sufficient distance between the TV and the VCR.

■■Try another channel. The problem may be with the broadcast.

■■Are the video cables installed properly?

■■Activate any function to restore the brightness of the picture.

■■Check for local interference such as an electrical appliance or power tool.

■■Station or cable channel experiencing problems, tune to another station.

■■Station signal is weak, reposition the antenna to receive weaker stations.

■■Check for sources of possible interference.

■■Check antenna (Change the position of the antenna).

■■CheckthatyourHDMIcableisHighSpeedHDMICable.

IftheHDMIcablesarenotHighSpeedHDMICable,flickeringornoscreendisplay canresult.PleaseusetheHighSpeedHDMICable.

<![if ! IE]>

<![endif]>ENGLISH

25

appendix

<![if ! IE]>

<![endif]>ENGLISH

The audio function does not work.

Picture OK & No

sound

No output from one of the speakers

Unusual sound from inside the TV

No sound when connecting HDMI or USB

■■Check whether the TV is switched on.

■■Press the+ or - button.

■■Sound muted? Press MUTE button.

■■Try another channel. The problem may be with the broadcast.

■■Are the audio cables installed properly?

■■Adjust Balance in menu option.

■■Achangeinambienthumidityortemperaturemayresultinanunusualnoisewhen the TV is switched on or off and does not indicate a fault with the TV.

■■Check HDMI cable is High Speed HDMI Cable.

■■Check USB cable over version 2.0.

There is a problem in PC mode. (Only PC mode applied)

The signal is out of range

(Invalid format)

Vertical bar or stripe on

background & Horizontal Noise & Incorrect position

Screen colour is unstable or single colour

■■Adjust resolution, horizontal frequency, or vertical frequency.

■■Check the input source.

■■Use Auto configure or adjust size, phase, or H/V position. (Option)

■■Check the signal cable.

■■Reinstall the PC video card.

There is a problem with PICTURE settings.

When the user changes the picture settings, the TV automatically converts back to the initial settings after a certain period of time.

■■It means that the TV is currently set to Store Demo mode. To switch to Home use mode you should do the followings:

From the TV Menu, choose OPTION -> Choose Mode Setting -> Choose Home use. Now, you have completed switching to the Home use mode.

tO view the user's guide on the cd-rom

To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader.

If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD"double-click your language.

To view the User 's guide

The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC.

After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly.

Open "My computer" Open the folder "LG" Double click the "index.htm" file.

26

An extended Owner ’s Manual that contains information on the advanced features of these LG TV sets is located on the CDROM provided in an electronic version.

To read these files, you will need to use a Personal Computer (PC) equipped with a CDROM drive.

Record the model number and serial number of the TV.

Refer to the label on the back cover and quote this information to your dealer when requiring any service.

Model :

Serial No. :

For any Suggestion, Opinion, Complaints, Please Call 800 54 in UAE 0800545454 in South Africa 081005454 in Morocco 19960 in Egypt

Other countries, Please contact our local dealer or log into http://www.lgservice.com