LG 32LG30DC User Manual

Please read this manual carefully before operating
your set.

Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.

LCD TV
OWNER’S MANUAL

32LG30DC
37LG30DC
42LG30DC

47LG50DC
52LG50DC

P/NO : SAC30708017 (0810-REV03)

www.lgcommercial.com

2

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

The lightning flash with arrowhead
symbol, within an equilateral triangle, is

intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral

triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the litera­ture accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.

3

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers)that produce
heat.

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.

Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

Only use attachments/accessories specified by
the manufacturer.

Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus com­bination to avoid injury from tip-over.

Unplug this apparatus during lighting storms
or when unused for long periods of time.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power­supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.

1

2

3

4

5

7

6

8

9

10

4

SAFETY INSTRUCTIONS

Never touch this apparatus or antenna during
a thunder or lighting storm.

When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.

Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.

CAUTION concerning the Power Cord:
It is recommend that appliances be placed

upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.

Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.

Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.

Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.

WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product
near flammable objects such as gasoline or
candles or expose the TV to direct air
conditioning.

Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).

GGRROOUUNN DD II NNGG

Ensure that you connect the earth ground wire
to prevent possible electric shock. (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC
outlet) If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.

Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.

DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS

Mains plug is the disconnecting device. The
plug must remain readily operable.

Keep the product away from direct sunlight.

12

11

14

13

16

17

18

19

Power
Supply

Short-circuit

Breaker

15

5

AANN TT EENN NNAASS
OOuuttddoooorr aann tteennnnaa ggrroouunnddiinngg

If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur.

Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.

Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding
electrodes and requirements for the grounding
electrode.

AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee
NNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700

CC lleeaa nniinngg

When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.

MMoovvii nngg

Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.

VVeennttii llaatt iioonn

Install your TV where there is proper ventilation.
Do not install in a confined space such as a
bookcase. Do not cover the product with cloth
or other materials (e.g.) plastic while plugged
in. Do not install in excessively dusty places.

If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the
power cord contact an authorized service center.

Do not press strongly upon the panel with
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.

22

20

23

24

25

21

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Ground Clamps

Power Service Grounding
Electrode System (NEC
Art 250, Part H)

Ground Clamp

Electric Service

Equipment

NEC: National Electrical Code

6

CONTENTS

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 3

FEATURE OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Stand Instruction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Cable Management

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Swivel Stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Attaching the TV to a Desk

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Securing the TV to the wall to prevent falling when
the TV is used on a stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . .

18

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

USB Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Other A/V Source Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Audio Out Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

WATCHING TV / CHANNEL CONTROL

Remote Control Functions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Turning On the TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Quick Menu / Favorite Channel Setup

. . . . . . . . . . . . . .

37

Initial Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . . . 42

- Add / Delete Channel (Manual Tuning) . . . . . . 43

- Channel Editing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Input List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Input Label

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

AV Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

SIMPLINK

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

USB

Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50

Photo List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Music List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

PICTURE CONTROL

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . . 58

Preset Picture Settings

- Picture Mode - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

60

- Color Tone - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Manual Picture Adjustment

- Picture Mode - User Mode

. . . . . . . . . . . . . . . . . . . . . . . .

62

- Picture Mode - Expert Control

. . . . . . . . . . . . . . . . . .

63

Picture Improvement Technology

. . . . . . . . . . . . . . . . . . . . . 64

Advanced Control - Black (Darkness) Level

. . . . . . .

65

Advanced Control - Eye Care

. . . . . . . . . . . . . . . . . . . . . . . . . . .

66

Advanced Control - Real Cinema

. . . . . . . . . . . . . . . . . . . . . . 67

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Power Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

69

7

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 70

Preset Sound Settings (Sound Mode)

. . . . . . . . . . . . . . . 71

Sound Setting Adjustment - User Mode

. . . . . . . . . . .

72

Clear Voice

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

75

Audio Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Stereo/SAP Broadcast Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

On-Screen Menus Language Selection

. . . . . . . . . . . . . 79

Caption Mode

- Analog Broadcasting System Captions

. . . . . . .

80

- Digital Broadcasting System Captions

. . . . . . . .

81

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

83

- Manual Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

85

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

PARENTAL CONTROL / RATINGS

Set Password & Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . . .

88

Channel Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Movie & TV Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

92

Downloadable Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

97

External Input Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

98

Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

99

APPENDIX

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 0

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 3

Programming the Remote Control

. . . . . . . . . . . . . . . . . 10 4

IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

External Control Through RS-232C

. . . . . . . . . . . . . . . .10 9

Open Source License

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

8

FEATURE OF THIS TV

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

FOR LCD TV

■

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is

nothing wrong with TV.

■

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they
have no adverse effect on the monitor's performance.

■

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce
some temporary distortion effects on the screen.

On Disposal (Only Hg lamp used LCD TV)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with
general household waste. Disposal of this product must be carried out in accordance to the regulations of your local
authority.

PREPARATION

9

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.

The accessories included may differ from the images below.

OOppttiioonn EExxttrraass

* Wipe spots on the exterior only with

the polishing cloth.

* Do not wipe roughly when removing

stain. Excessive pressure may cause
scratch or discoloration.

Polishing Cloth

(This feature is not available

for all models.)

Copyright© 2007 LGE,
All Rights Reserved.

D-sub 15 pin Cable

1.5V 1.5V

Owner’s Manual Power Cord

Remote Control,

Batteries

INPUT

FAV

MUTE

T
V

S

T
B

POWER

Q. MENU

MENU

A
V

M

O
D

E

R
E
T

U
R

N

ENTER

V

O
L

C
H

123

456

78

0

9

FLASHBK

P
A
G

E

D

V

D

V

C
R

CD Manual

When using the VGA (D-sub 15 pin
cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain
standards compliance.

Bolts for stand assembly

(Refer to P.13)

(Only 32/37/42LG30DC)

Protection Cover

Screw for stand fixing

(Refer to P.16)

(Only 32/37/42LG30DC)

x 4 x 4

or

Protective Bracket and Bolt for

Power Cord

(This feature is not available for all models.)

(Refer to P.15)

PREPARATION

10

PREPARATION

POWER Button

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates blue when the set is switched on.
(Can be adjusted using

PPoo wweerr II nnddiiccaattoo rr

in

the OPTION menu.

GG

pp..6699

)

CHANNEL ( , )
Buttons

VOLUME (+, -)
Buttons

ENTER Button

MENU Button

INPUT Button

Intelligent Sensor (Except 32/37/42LG30DC)

Adjusts picture according to the surrounding
conditions

Remote Control Sensor

FRONT PANEL INFORMATION

■

Image shown may differ from your TV.

■

NOTE: If your TV has a protection tape attached, remove the tape.
And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it).

CH

VOL

ENTER

MENU

INPUT

PREPARATION

11

BACK PANEL INFORMATION

■

Image shown may differ from your TV.

AV IN 2

L/ MONO

R

AUDIO

VIDEO

USB IN

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

R

HDMI/DVI IN

2

1

VIDEO

MONO

( )

AUDIO

S-VIDEO

1

3

4

6

7

8

2

9

9

5

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE
CONTROL IN

RJP

INTERFACE

ANTENNA/

CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

OPTICAL

AUDIO OUT

AV IN 1

R

VIDEO

MONO

( )

AUDIO

S-VIDEO

2

1

HDMI/DVI IN

DIGITAL

AUDIO OUT

1

3

4

7

6

2

8

5

10

AV IN 2

L/ MONO

R

AUDIO

VIDEO

USB

SERVICE ONLY

9

11

12

47/52LG50DC

32/37/42LG30DC

R

13

9

PREPARATION

12

PREPARATION

HDMI/DVI IN, HDMI IN

Digital Connection.
Supports HD video and Digital audio. Doesn’t

support 480i.
Accepts DVI video using an adapter or HDMI to

DVI cable (not included).

COMPONENT IN

Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video & red

and white for audio.

RGB (PC)

Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).

AUDIO (RGB/DVI)

1/8” headphone jack for analog PC audio input.

REMOTE CONTROL IN PORT

For a wired remote control.

RS-232C IN (CONTROL & SERVICE) PORT

Used by third party devices.

ANTENNA/CABLE IN

Connect over-the air signals to this jack.
Connect cable signals to this jack.

DIGITAL AUDIO OUT

Digital audio output for use with amps and home
theater systems.

Includes an optical and/or coaxial connection.
Note: In standby mode, these ports do not work.

AUDIO OUT

Analog audio output for use with amps and home
theater systems.

AV (Audio/Video) IN

Analog composite connection. Supports standard
definition video only (480i).

S-VIDEO

Better quality than standard composition.
Supports standard definition video only (480i).

USB INPUT

Used for viewing photos and listening to MP3s.

USB SERVICE ONLY

Used for software updates.

RJP INTERFACE

Power Cord Socket

For operation with AC power.
Caution: Never attempt to operate the TV on DC

power.

1

2

3

4

5

6

9

10

11

12

13

7

8

PREPARATION

13

STAND INSTRUCTION

■

Image shown may differ from your TV.

Assemble the parts of the

SS TT AANNDD BBOODDYY

with

CCOOVVEERR BBAASSEE

of the TV.

2

Assemble the TV as shown.

3

Fix the 4 bolts securely using the holes in the
back of the TV.

4

SS TT AANNDD BB OO DD YY

CCOOVVEERR BBAASSEE

Carefully place the TV screen side down on a cush­ioned surface to protect the screen from damage.

1

INSTALLATION (

Only 32/37/42LG30DC)

DETACHMENT

Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.

1

Loose the bolts from TV.

2

Detach the stand from TV.

3

After removing the stand, install the included
pp rr oott eeccttii oonn ccoo vvee rr

over the hole for the stand.

Press the

PPRROOTTEECCTTIIOONN CCOOVVEERR

into the TV

until you hear it click.

PROTECTION COVER

GG

When assembling the desk type stand, make sure
the bolt is fully tightened (If not tightened fully,
the TV can tilt forward after the product installa­tion). Do not over tighten.

NOTE

!

PREPARATION

14

PREPARATION

VESA WALL MOUNTING

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest dealer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.

GG

Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric
shock.

CAUTION

GG

Screw length needed depends on the wall mount
used. For further information, refer to the instruc­tions included with the mount.

GG

Standard dimensions for wall mount kits are shown
in the table.

GG

When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.

GG

Do not use screws longer then the standard dimen­sion, as they may cause damage to the inside to
the TV.

GG

For wall mounts that do not comply with the VESA

standard screw specifications, the length of the
screws may differ depending on their specifica­tions.

GG

Do not use screws that do not comply with the
VESA standard screw specifications.

Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.

GG

LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installa­tion instructions.

NOTE

!

AA

BB

Product Model

VESA

(A *B)

Standard Screw Quantity

32LG30DC

37LG30DC
42LG30DC
47LG50DC

52LG50DC

200* 10 0

200* 200

800* 400

M4

M6

M6

4

4

4

LCD TV

PREPARATION

15

CABLE MANAGEMENT

■

Image shown may differ from your TV.

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4 inches
on all four sides from the wall.

■

Image shown may differ from your TV.

4 inches

4 inches

4 inches

4 inches

GG

Ensure adequate ventilation by following the
clearance recommendations.

GG

Do not mount near or above any type of
heat source.

CAUTION

SWIVEL STAND

After installing the TV, you can adjust the TV set
manually to the left or right direction by 20 degrees
to suit your viewing position.

Connect the cables as necessary.
To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE

BRACKET and the screw as shown. It will help
prevent the power cable from being removed
by accident.

Install the CABLE MANAGEMENT CLIP as
shown.

CABLE MANAGEMENT CLIP

1

2

Put the cables inside the CABLE MANAGEMENT
CLIP and snap it closed.

3

PROTECTIVE
BRACKET

(This featur

e is not

a

vailable for all models.)

PREPARATION

16

PREPARATION

ATTACHING THE TV TO A DESK

The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product.

GG

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.

WARNING

1-Screw

(provided as parts of the product)

Desk

Stand

Only 32/37/42LG30DC

GG

Screw: M5 x L

(*L: Table depth + 8~10 mm)

ex) Table depth: 15mm, Screw: M5 x 25

4-Screws
(not provided as parts of the product)

Stand

Desk

PREPARATION

17

SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,

potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope or cord (sold separately) to tie the product. It is
safer to tie the rope so it becomes horizontal between the wall and the
product.

■

You should purchase necessary components to prevent TV from falling off of the stand.

■

Image shown may differ from your TV.

GG

Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

GG

To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.

NOTE

!

PREPARATION

18

PREPARATION

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connection.

For optimum picture quality, adjust the antenna direction if needed.

2. Cable

Wall
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

Cable TV
Wall Jack

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wire
when connecting the antenna.

Copper Wire

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

R

■

To prevent damage do not connect to the power outlet until all connections are made between the devices.

EXTERNAL EQUIPMENT SETUP

19

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if
you do receive digital signals from a digital set-top box or other digital external device.

Component Connection

1. How to connect

Connect the video outputs (Y, P

B, P

R

)

of the digital set-

top box to the

CC OO MMPP OO NNEENNTT IINN VVIIDD EEOO 11

jacks on

the TV. Match the jack colors (Y = green, P

B

= blue, and

P

R

= red).

Connect the audio output of the digital set-top box to
the

CC OO MMPP OO NNEENNTT IINN AAUUDD IIOO 11

jacks on the TV.

2

1

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box. operation

)

■

Select the

CC oommppoo nneenntt 11

input source on the TV using

the

II NNPPUU TT

button on the remote control.

■

If connected to

CC OO MMPP OO NNEENN TT IINN22

input, select the

CC oommppoo nneenntt 22

input source on the TV.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

Image shown may differ from your TV.

Y, C

B/

P

B, CR/

P

R

Supported Resolutions

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

15.73 59.94

15.73 60.00

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

Signal

480i

480p

720p

10 8 0 i

10 8 0 p

Component

Yes

Yes

Yes

Yes

Yes

HDMI

No

Yes

Yes

Yes

Yes

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

(CO

AV IN 1

COMPONENT IN

1

2

VIDEO

LYP

B

P

R

R

AUDIO

Y L RPB PR

1

2

EXTERNAL EQUIPMENT SETUP

20

EXTERNAL EQUIPMENT SETUP

HDMI Connection

Connect the digital set-top box to

HHDDMMII // DDVVII II NN11

or 22jack on the TV.

No separate audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select the

HHDDMMII11

or

HHDDMMII22

input source on the TV using

the

IINNPPUUTT

button on the remote control.

2

1

HDMI-DTV

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.939

67.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

1920x1080p

RGB IN

COMPONENT

A

(RG

RGB(PC)

1

2

VIDEO

YP

B

P

R

HDMI/DVI IN

2

1

HDMI-DTV OUTPUT

1

EXTERNAL EQUIPMENT SETUP

21

DVI to HDMI Connection

1. How to connect

2. How to use

■

Turn on the digital set-top box. (Refer to the owner’s manu­al for the digital set-top box.

)

■

Select the

HHDDMMII11orHHDDMMII22

input source on the TV using

the

IINNPPUUTT

button on the remote control.

2

1

Connect the DVI output of the digital set-top box to
the

HHDDMMII//DDVVII IINN 11

or 22jack on the TV.

Connect the PC audio output to the

AAUU DD II OO

((

RRGGBB//DDVVII

))

jack on the TV.

GG

A DVI to HDMI cable or adapter is required for this con­nection. DVI doesn't support audio, so a separate audio
connection is necessary.

NOTE

!

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMO

CONTRO

1

2

VIDEO

LYP

B PR R

AUDIO

HDMI/DVI IN

2

1

L R

DVI-DTV OUTPUT

1

2

EXTERNAL EQUIPMENT SETUP

22

EXTERNAL EQUIPMENT SETUP

DVD SETUP

Component Connection

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPBP

R

Video output ports

on DVD player

Y

Y

Y

Y

P

B

B-Y

Cb

Pb

PR

R-Y

Cr

Pr

Connect the video outputs (Y, P

B, P

R

)

of the DVD to the

CC OO MM PPOO NNEENNTT IINN VVIIDDEEOO 11

jacks on the TV.

Match the jack colors (Y = green, P

B = blue, and PR

= red

)

.

Connect the audio outputs of the DVD to the
CC OO MM PPOO NNEENNTT IINN AAUUDDIIOO 11

jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

CC oommppoo nneenntt 11

input source on the TV using

the

II NNPPUU TT

button on the remote control.

■

If connected to

CC OO MMPP OO NNEENN TT IINN 22

input, select the

CC oommppoo nneenntt 22

input source on the TV.

■

Refer to the DVD player's manual for operating instructions.

2

1

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL

(C

AV IN 1

COMPONENT IN

1

2

VIDEO

LYP

B

P

R

R

AUDIO

Y L RPB PR

1 2

EXTERNAL EQUIPMENT SETUP

23

HDMI Connection

Connect the HDMI output of the DVD to the
HHDDMMII//DDVVII IINN 11

or 22jack on the TV.

No separate audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select the

HHDDMMII11

or

HHDDMMII22

input source on the TV using

the

II NNPPUU TT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

2

1

COMPONENT IN

AUDI

(RGB/D

RGB(PC)

1

2

VIDEO

LYP

B

P

R

A

HDMI/DVI IN

2

1

HDMI-DVD OUTPUT

1

S-Video Connection

GB/DVI)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO LR

(MONO)

AUDIO

S-VIDEO

L R

S-VIDEO

AUDIO

1

2

Connect the S-VIDEO output of the DVD to the
SS --VVIIDDEEOO

input on the TV.

Connect the audio outputs of the DVD to the

AAUUDDIIOO

input jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

AAVV11

input source on the TV using the

II NNPPUU TT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

2

1

EXTERNAL EQUIPMENT SETUP

24

VCR SETUP

EXTERNAL EQUIPMENT SETUP

Antenna Connection

■

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■

If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
This phenomenon is common to all TVs and is not covered by warranty.

ANTENNA/

CABLE IN

COAXIAL

AUDIO OUT

(MONO)

AUDIO

L R

S-VIDEO VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

Wall Jack

Antenna

1

2

Connect the RF antenna out socket of the
VCR to the

AANN TT EENN NNAA//CCAABBLLEE IINN

sock-

et on the TV.

Connect the antenna cable to the RF
antenna in socket of the VCR.

1. How to connect

2. How to use

■

Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.

■

Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.

)

2

1

EXTERNAL EQUIPMENT SETUP

25

GG

Do not connect to both Video and S-Video at the same
time. In the event that you connect both Video and the
S-Video cables, only the S-Video will work.

CAUTION

GG

S-Video provides better quality
than composite. Use it when
available.

NOTE

!

S-Video Connection

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

ANTENNA

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L

R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO LR

(MONO)

AUDIO

S-VIDEO

L R

S-VIDEO VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

1

2

Connect the S-VIDEO output of the VCR to the
SS --VVIIDDEEOO

input on the TV.

Connect the audio outputs of the VCR to the

AAUUDDIIOO

input jacks on the TV.

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR.
(

Refer to the VCR owner’s manual.

)

■

Select the

AAVV11

input source on the TV using the

II NNPPUU TT

button on the remote control.

2

1

Composite (RCA) Connection

GG

If you have a mono VCR, connect the audio cable from
the VCR to the

AAUUDDIIOO LL // MMOONNOO

jack of the TV.

NOTE

!

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO L R

(MONO)

AUDIO

S-VIDEO

L R

S-VIDEO VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

1

Connect the

AAUUDDIIOO/VVII DD EEOO

jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR.
(

Refer to the VCR owner’s manual.

)

■

Select the

AAVV11

input source on the TV using the

II NNPPUU TT

button on the remote control.

■

If connected to

AAVV IINN22

, select

AAVV22

input source on the TV.

1

EXTERNAL EQUIPMENT SETUP

26

PC SETUP

EXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

Connect the DVI output of the PC to the

HHDDMMII // DDVVII

II NN 11

or

22

jack on the TV.

Connect the PC audio output to the

AAUU DD II OO

((RRGGBB//DD VV II))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select the

HHDDMMII11orHHDDMMII22

input source on the TV using the

II NNPPUU TT

button on the remote control.

2

1

COMPONENT IN

RE

CON

1

2

VIDEO

LYP

BPR

R

AUDIO

HDMI/DVI IN

2

1

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

DVI-PC OUTPUT

AUDIO

1 2

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

VGA (D-Sub 15 pin) Connection

Connect the VGA output of the PC to the

RR GG BB

((

PPCC

))

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO

((

RRGGBB//DDVVII

))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select the

RRGGBB--PPCC

input source on the TV using the

II NNPPUU TT

button on the remote control.

2

1

COMPONENT IN

REMOTE

CONTROL I

1

2

(CO

VIDEO

LYP

B

P

R

R

AUDIO

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

RGB OUTPUT

AUDIO

1 2

EXTERNAL EQUIPMENT SETUP

27

GG

32/37/42LG30DC: To get the the best picture
quality, adjust the PC graphics card to 1360x768.

GG

47/52LG50DC: To get the the best picture quali­ty, adjust the PC graphics card to 1920x1080.

GG

Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.

GG

In PC mode, there may be noise associated with
the resolution, vertical pattern, contrast or bright­ness. If noise is present, change the PC output to
another resolution, change the refresh rate to
another rate or adjust the brightness and contrast
on the PICTURE menu until the picture is clear.

GG

Avoid keeping a fixed image on the screen for a
long period of time. The fixed image could become
permanently imprinted on the screen.

GG

The synchronization input form for Horizontal and
Vertical frequencies is separate.

GG

Depending on the graphics card, some resolution
settings may not allow the image to be positioned
on the screen properly.

GG

If there are overscan in HDMI-PC 1920x1080,
change aspect ratio to

JJuusstt ssccaann

.

NOTES

!

Supported Display Specifications (RGB-PC, HDMI-PC)

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.469 70.08

31.469 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47.776 59.87

47.720 59.799

47.130 59.65

Resolution

720x400

1360x768

640x350

640x480

800x600

1024x768

1280x768

1366x768

For 32/37/42LG30DC

For 47/52LG50DC

* Only RGB-PC mode

Resolution

640x350

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.468 70.09

31.469 70.08

31.469 59.94

37.500 75.00

37.861 72.80

35.156 56.25

37.879 60.31

46.875 75.00

48.077 72.18

48.363 60.00

56.476 70.06

60.023 75.02

47.776 59.87

60.289 74.893

63.981 60.02

79.976 75.025

47.712 60.015

75.00 60.00

66.587 59.934

67.5 60.00

* Only RGB-PC mode

720x400

1360x768

640x480

800x600

1024x768

1280x1024

1600x1200

1920x1080

RGB-PC

HDMI-PC

1280x768

EXTERNAL EQUIPMENT SETUP

28

EXTERNAL EQUIPMENT SETUP

Screen Setup for PC mode

Selecting Resolution

You can choose the resolution in RGB-PC mode.
The

PP oossiitt iioonn, PP hhaassee

, and

SS iizzee

can also be adjusted.

Select

PPIICCTTUURREE

.

Select

SS cc rreeeenn ((RRGGBB-- PPCC))

.

Select

RReessoo lluutt iioo nn

.

Select the desired resolution.

1024 x 768

1280 x 768

1360 x 768

1366 x 768

Auto config.

Resolution

G

Position

Size

Phase

Reset

SCREEN

Move

Prev.

MENU

1

MENU

3

4

2

ENTER

ENTER

ENTER

5

ENTER

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Only for

32/37/42LG30DC

EXTERNAL EQUIPMENT SETUP

29

Auto Configure

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.

Select

SS cc rreeeenn ((RRGGBB-- PPCC))

.

Select

AAuuttoo ccoo nnff iigg..

.

Auto config.

G

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

MENU

To Set

3

2

ENTER

ENTER

Select

YYeess

.

4

ENTER

Start Auto Configuration.

5

ENTER

Select

PPIICCTTUURREE

.

1

MENU

• If the position of the image is still not
correct, try Auto adjustment again.

• If picture needs to be adjusted again
after Auto adjustment in RGB-PC, you
can adjust the

PPooss ii tt iioo nn, SS iizzee

or

PPhhaassee

.

Yes No

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

EXTERNAL EQUIPMENT SETUP

30

EXTERNAL EQUIPMENT SETUP

Adjustment for screen Position, Size, and Phase

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.

This feature operates only in RGB-PC mode.

Select

PPoossii tt iioo nn, SS ii zzee

, or

PPhhaassee

.

Make appropriate adjustments.

Auto config.

Resolution

Position

G

Size

Phase

Reset

GF

D

E

SCREEN

Move

Prev.

MENU

3

ENTER

4

ENTER

■

PPoossii tt iioo nn

: This function is to adjust pic­ture to left/right and up/down as you
prefer.

■

SS ii zzee

: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal
screen size will also change.

■

PPhhaa ssee

: This function allows you to
remove any horizontal noise and clear or
sharpen the image of characters.

Select

PPIICCTTUURREE

.

Select

SS cc rreeeenn ((RRGGBB-- PPCC))

.

1

MENU

2

ENTER

5

ENTER

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

EXTERNAL EQUIPMENT SETUP

31

Screen Reset (Reset to original factory values)

Returns

PP oossii ttii oonn, SS iizz ee

, and

PP hhaassee

to the default factory settings.

This feature operates only in RGB-PC mode.

Auto config.

Position

Resolution

Size

Phase

Reset

G

SCREEN

Move

Prev.

MENU

To Set

Select

RReess eett

.

3

ENTER

Select

PPIICCTTUURREE

.

Select

SS cc rreeeenn ((RRGGBB-- PPCC))

.

1

MENU

2

ENTER

Select

YYeess

.

4

ENTER

5

ENTER

Yes No

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

EXTERNAL EQUIPMENT SETUP

32

EXTERNAL EQUIPMENT SETUP

USB CONNECTION

(Except 32/37/42LG30DC)

AV IN 2

L/ MONO

R

AUDIO

VIDEO

USB IN

Connect the USB device to the

UUSSBB II NN

jack on the side

of TV.

1. How to connect

1

2. How to use

■

After connecting the

UUSSBB II NN

jack, you use the USB func-

tion. (

GG

pp..5500

)

1

or

OTHER A/V SOURCE SETUP

L/ MONO

R

AUDIO

VIDEO

USB IN

L R

VIDEO

Camcorder

Video Game Set

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks
between TV and external equipment.
Match the jack colors

.

(

Video = yellow, Audio Left = white, and

Audio Right = red

)

1. How to connect

2. How to use

■

Select the

AAVV22

input source on the TV using

the

II NNPPUU TT

button on the remote control.

■

If connected to

AAVV IINN11

input, select the

AAVV11

input source on the TV.

■

Operate the corresponding external equipment.

1

1

EXTERNAL EQUIPMENT SETUP

33

AUDIO OUT CONNECTION

Send the TV’s audio to external audio equipment via the Audio Output port.

RS-232C IN

(CONTROL & SERVICE)

R

AUDIO OUT

AV IN 1

VIDEO L R

(MONO)

AUDIO

S-VIDEO

L R

AUDIO

1

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO L R

(MONO)

AUDIO

S-VIDEO

1

2

GG

When connecting with external audio equipments, such as
amplifiers or speakers, you can turn the TV speakers off in
the menu. (

GG

pp.. 7755

)

NOTE

!

G

Do not look into the optical output port. Looking at the
laser beam may damage your vision.

GG

Block the SPDIF out (optical/coaxial) about the contents
with ACP(Audio Copy Protection) function.

CAUTION

Connect one end of the optical or coaxial cable to the
TV’s

OOPPTTII CCAA LL

or

CCOOAAXXIIAALL

(Except 32/37/42LG30DC)

port of

DDIIGGIITTAALL AAUUDDIIOO OOUUTT

.

Connect the other end of the optical or coaxial cable to
the digital audio input on the audio equipment.

Set the “TV Speaker option - Off” in the AUDIO menu. (

GG

pp..7755

). See the external audio equipment instruction manu-

al for operation.

1. How to connect

2

3

1

Connect audio outputs to the TV’s

AAUUDDIIOO OOUUTT

jacks.

Set the “TV Speaker option - Off” in the AUDIO menu.
(

GG

pp.. 7755

). See the external audio equipment instruction

manual for operation.

1. How to connect

2

1

Analog

Digital

WATCHING TV / CHANNEL CONTROL

34

REMOTE CONTROL FUNCTIONS

WATCHING TV / CHANNEL CONTROL

When using the remote control, aim it at the remote control sensor on the TV.

INPUT

FAV

MUTE

TV

STB

POWER

Q. MENU MENU

AV MODERETURN

ENTER

VOL

CH

123

456

7809

FLASHBK

P
A
G
E

DVD

VCR

TV/STB/DVD/VCR

POWER

Q.MENU

MENU

INPUT

VOLUME UP

/DOWN

FAV

MUTE

CHANNEL

UP/DOWN

PAGE

UP/DOWN

— (DASH)

FLASHBK

Select the remote operating mode: TV, STB, DVD, or VCR.

Turns your TV or any other programmed equipment on or
off, depending on the mode.

Select the desired quick menu source.

GG

pp..3377

Displays the main menu.
Clear all on-screen displays and return to TV viewing from

any menu.

External input modes rotate in regular sequence.

Increase/decrease the sound level.

Scroll through the programmed Favorite channels.

GG

pp..3377

Switch the sound on or off.

GG

pp..3366

Select available channels.

Move from one full set of screen information to the next one.

Used to enter a program number for multiple
program channels such as 2-1, 2-2, etc.

Tune to the last channel viewed.

Control video cassette recorders or DVD players.
Control USB menu (PHOTO LIST and MUSIC LIST.)
Control the SIMPLINK compatible devices.

NUMBER button

VCR/DVD, USB,

SIMPLINK

Control buttons

WATCHING TV / CHANNEL CONTROL

35

Installing Batteries

■

Open the battery compartment cover on the back side and install
the batteries matching correct polarity (+with +,-with -).

■

Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.

■

Close cover.

THUMBSTICK

(Up/Down/Left

Right/ENTER)

RETURN

SIMPLINK

AV MODE

Navigate the on-screen menus and adjust the system settings to your preference.

Allows the user to move return one step in an interactive application or other user interaction
function.

See a list of AV devices connected to TV.
When you toggle this button, the SIMPLINK menu appears at the screen.

GG

pp..4488--4499

It helps you select and set images and sounds.

GG

pp..4477

WATCHING TV / CHANNEL CONTROL

36

WATCHING TV / CHANNEL CONTROL

TURNING ON THE TV

NOTE

!

GG

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

First, connect power cord correctly.
At this moment, the TV switches to standby mode.

■

In standby mode to turn TV on, press the ,

IINNPPUUTT,CCHH ((

or

))

button on the TV or press the

PPOOWWEERR, IINNPPUUTT, CCHH((

or )),

NNuummbbeerr

((00~99))

button on the remote control.

Select the viewing source by using the

IINNPPUUTT

button on the remote control.

■

This TV is programmed to remember which power state it was last set to,
even if the power cord is out.

When finished using the TV, press the

PPOOWWEERR

button on the remote control.

The TV reverts to standby mode.

1

2

3

Press the

CCHH ((

or ))or

NNUUMMBBEERR

buttons to select a channel number.

1

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the

VVOOLL ((++

or

--))

button to adjust the volume.

If you want to switch the sound off, press the

MMUUTTEE

button.

You can cancel the Mute function by pressing the

MMUUTTEE

or

VVOOLL ((++

or

--))

button.

Adjust the volume to suit your personal preference.

1

2

3

WATCHING TV / CHANNEL CONTROL

37

QUICK MENU / FAVORITE CHANNEL SETUP

■

AAsspp eecctt RRaattii oo

: Selects your desired picture format.

■

BBaacckkll iigghhtt

: Adjust the brightness of LCD panel to

control the brightness of the screen.

■

CC lleeaa rr VVooiiccee

: By differentiating the human sound
range from others, it helps make human voices
sound better.

■

PPiiccttuu rree MM ooddee

: Selects the factory preset picture

depend on the viewing environment.

■

SS oouunndd MMooddee

: Selects the factory preset sound for

type of program.

■

CC aapp tt iioo nn

: Select on or off.

■

MMuullttii AAuu ddiioo

: Changes the audio language (Digital
signal).

SS AA PP

: Selects MTS sound (Analog signal).

■

SS lleeeepp TT iimmee rr

: Select the amount of time before

your TV turns off automatically.

■

DDeell//AAdddd//FFaavv

: Select channel you want to add/delete

or add the channel to the Favorite List.

■

UUSS BB EEjj eecctt

: Select “USB Eject” in order to eject

USB device.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.

Q.Menu

3

FF

16:9

GG

Vivid

Off

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Backlight

Clear Voice

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

USB Eject

CH

Close

Except 32/37/42LG30DC

Favorite Channle Setup

Select

DDeell//AAdd dd// FFaavv

.

■

To tune to a favorite channel, press the

FFAAVV

(Favorite) button repeatedly.

2

Q. MENU

1

CH

1

456

7809

23

Select your desired channel.or

3

Select

FFaavvoorr iittee

.

4

Q. MENU

Return to TV viewing.

Display each menu.

Make appropriate adjustments.

1

Q. MENU

2

3

Q. MENU

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

38

WATCHING TV / CHANNEL CONTROL

INITIAL SETTING

This Function guides the user to easily set the essential items for viewing the TV for the first time when pur­chasing the TV. If will be displayed on the screen when turning the TV on for the first time. It can also be acti­vated from the user menus.

Select

HHoo mmee

Mode.

1

2

ENTER

Select

AAuutt oo

or

MM aannuuaall

.

Select desired time option.

1

3

ENTER

2

Year

Current Time Setting

2007

Month

11

Date

15

Hour

5 PM

Minute

52

Time Zone

Eastern

Daylight Saving

Off

FF

Auto

GG

ExitEnter

RETURN

Step2. Time Setting

Selecting the environment.
Choose the setting mode you want.

In Store

Home

ExitEnter

RETURN

Step1. Mode Setting

Step1. Mode setting

Step2. Time setting

■

Default selection is “

HHoo mmee

”. We recommend setting the TV to “

HHoo mmee

” mode for the best picture in your

home environment.

■

“

IInn--ssttoo rree

” Mode is only intended for use in retail environments. Customers can adjust the “

PPiiccttuurree

menu -

PPiiccttuu rree mmoo ddee

” manually while inspecting the TV, but the TV will automatically return to preset in-store

mode after 5 minutes.

!

WATCHING TV / CHANNEL CONTROL

39

Select

OOSS DD LLaanngguu aaggee SS eettttii nngg

or

AAuu ddiioo LLaanngguu aaggee SSeett tt iinngg

.

Start

AAuuttoo TTuunnii nngg

.

Select your desired language.

1

3

ENTER

1

ENTER

2

Auto Tuning can change channel map.
Do you want to start Auto Tuning?

Enter

Exit

Enter

RETURN

Step4. Auto Tuning

ExitEnter

RETURN

Step3. Option Setting

1. OSD Language Setting

FF

English

GG

2. Audio Language Setting

French

Step3. Option setting

Step4. Auto Tuning

■

You can also adjust

IInniittiiaall SSeett tt iinngg

in the

OO PPTTII OONN

menu

.

NOTE

!

WATCHING TV / CHANNEL CONTROL

40

WATCHING TV / CHANNEL CONTROL

ON-SCREEN MENUS SELECTION

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

Display each menu.

Select a menu item.

Enter to the pop up menu.

1

MENU

3

2

ENTER

ENTER

Return to TV viewing.

4

MENU

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

CHANNEL

CHANNEL

OPTION

PICTURE

LOCK

AUDIO

INPUT

TIME

USB

Enter

Move

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

PICTURE

E

Enter

Move

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

AUDIO

E

LR

Enter

Move

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

TIME

Enter

Move

PHOTO LIST

MUSIC LIST

USB

Enter

Move

Antenna

Cable

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

INPUT

E

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Enter

Move

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

OPTION

For USA For Canada

47/52LG50DC

RG

WATCHING TV / CHANNEL CONTROL

41

32/37/42LG30DC

Display each menu.

Select a menu item.

Enter to the pop up menu.

1

MENU

3

2

ENTER

ENTER

Return to TV viewing.

4

MENU

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

CHANNEL

CHANNEL

TIME

PICTURE

OPTION

AUDIO

LOCK

Enter

Move

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

PICTURE

E

Enter

Move

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

AUDIO

E

LR

Enter

Move

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

TIME

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Enter

Move

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

OPTION

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

For USA For Canada

RG

WATCHING TV / CHANNEL CONTROL

42

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the
channel list.

Run Auto Tuning again after any Antenna/Cable connection changes.

Select

CC HH AANNNNEE LL

.

Select

AAuuttoo TTuunnii nngg

.

Select

YYeess

.

Run

AAuuttoo ttuunnii nngg

.

Enter

Move

CHANNEL

Enter

Move

CHANNEL

1

MENU

3

2

ENTER

ENTER

4

ENTER

Auto Tuning

Manual Tuning

Channel Edit

Auto Tuning

Manual Tuning

Channel Edit

Press ‘Yes’ button to begin
auto tuning.

Yes

No

■

A password is required to gain access to
Auto Tuning menu if the Lock System is
turned on.

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

43

Select

CC HH AANNNNEE LL

.

1

MENU

2

ENTER

If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality
of the signal being received.

Add/Delete Channel (Manual Tuning)

Enter

Move

CHANNEL

Enter

Move

CHANNEL

Channel

Select channel type and
RF-channel number.

FF

DTV

GG

2

Close

Delete

Auto Tuning

Manual Tuning

Channel Edit

DTV 2-1

Bad Normal Good

Select

MMaannuuaall TTuunniinngg

.

Select

DDTTVV, TT VV, CC AA DD TTVV

, or

CC AA TT VV

.

Select channel you want to add
or delete.

3

ENTER

4

Select

AAdd dd

or

DDeell eettee

.

5

ENTER

Auto Tuning

Manual Tuning

Channel Edit

■

A password is required to gain access to
Manual Tuning menu if the Lock System
is turned on.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

44

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

Select a channel.

Select channel you want to add or
delete.

3

ENTER

4

ENTER

A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom
List are displayed in black and the channels deleted from the Custom List are displayed in gray.

Once a channel is highlighted you can add or delete the channel by referring to the small window at the top­right corner of the screen.

Channel Editing

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Select

CC HH AANNNNEE LL

.

1

MENU

2

ENTER

Select

CC hhaa nnnn eell EEddiitt

.

RETURN

Return to TV viewing.

Return to the previous menu.

5

MENU

Add/Delete

Move Page

CH

Move

Previous

MENU

Exit

RETURN

WATCHING TV / CHANNEL CONTROL

45

INPUT LIST

Only these input signals which are connected to a TV can be activated and selected.

Select the desired input source.

■

You can also select the desired input source in the

IINNPPUUTT

menu

(Except 32/37/42LG30DC).

1

INPUT

Antenna Cable AV1 AV2

HDMI2 HDMI1 RGB-PC

Component2 Component1

Antenna Cable AV1 AV2 Component1

ENTER

■

AAnn tt eennnnaa

: Select it to watch over-the-air broadcasts.

■

CC aa bbllee

: Select it to watch cable and digital cable.

■

AA VV

: Select them to watch a VCR or other external equipment.

■

CC oommppoo nneenntt

: Select them to watch DVD or a Digital set-top box.

■

RRGGBB--PPCC

: Select it to view PC input.

■

HHDDMM II

: Select them to watch high definition devices.

Antenna Cable AV1 AV2 Component1

Input Label

Q.MENU

Exit

RETURN

Select a desired input source (except
AAnntt ee nnnnaa

or

CCaa bbllee

). Then, you can select
your desired Input Label with using Q. MENU
button.

GG

pp..4466

Disconnected inputs are inactive (grayed out)

WATCHING TV / CHANNEL CONTROL

46

WATCHING TV / CHANNEL CONTROL

INPUT LABEL

You can set a label for each input source when it's not in use.

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Select

OOPPTT IIOO NN

.

Select

IInnppuu tt LLaabb eell

.

Select the label.

1

MENU

2

ENTER

Select the source.

3

ENTER

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

With using OPTION menu

Select the source.

Select the label.

1

INPUT

2

Q. MENU

3

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

With using INPUT button

OOnnllyy ffoorr 4477//5522LL GG5500DD CC

■

When new external device is connected, this popup menu is displayed automatically.
If selecting

YYeess

, you can select input source that you want to appreciate.

■

But, when selecting “

SS IIMMPP LLIINN KK- OO nn

”, popup menu for HDMI input will not be displayed.

No

Ye s

!

New external device is connected.
Do you want to enjoy this?

!

Select input source that you want to appreciate.

AV1

AV2

Component1

AV1

FF GG

AV2

Component1

HDMI1

RGB-PC

Component2

HDMI2

Close

WATCHING TV / CHANNEL CONTROL

47

AV MODE

You can select the optimal images and sounds.

1

AV MODE

2

Off Cinema

Game Sport

Press the

AAVV MMOODDEE

button repeatedly to select the desired source.

ENTER

■

If you select “

CC iinneemmaa

” in AV mode,

CC iinneemm aa

will be selected both for “PIC­TURE menu - Picture Mode” and “AUDIO
menu - Sound Mode” respectively.

■

If you select “

OO ff ff

” in AV mode, the

“

PPiiccttuu rree MMoo ddee

” and “

SS oouunndd MMoodd ee

”

return to previous selected value.

WATCHING TV / CHANNEL CONTROL

48

WATCHING TV / CHANNEL CONTROL

This function operates only with devices with the logo.
The TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected with HDMI cable without additional cables and

settings.
To start using SIMPLINK, turn it on in the user menus.

Enter

Move

OPTION

Select

OOPPTT IIOO NN

.

Select

SS IIMMPPLL IINN KK

.

Select

OO nn orOO ff ff

.

Enter

Move

OPTION

1

MENU

3

2

ENTER

ENTER

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Off

On

NOTE

!

GG

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the
SIMPLINK device with the HDMI cable.

GG

When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device
will stop.

GG

When you select a device with home theater functionality, the sound output automatically switches to
the home theater speakers.

GG

If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL
AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM­PLINK device with an OPTICAL cable.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

49

■

DDii rreecctt PPllaayy ::

After connecting AV devices to the TV, you can directly control the devices and play media with-

out additional settings.

■

SS eelleecctt AA VV ddeevv iiccee::

Enables you to select one of the AV devices connected to TV.

■

DDiiss cc ppllaayybbaacckk::

Control connected AV devices by pressing the ,

ENTER, G, A,

ll ll

, FFand GGbuttons.

■

PPoowweerr ooffff aallll ddeevviicceess ::

When you power off the TV, all connected devices are turned off.

■

SS wwii ttcchh aauu ddiioo--oouutt::

Offers an easy way to switch audio-out.

■

SS yynncc PPooww eerr oonn::

When you play the connected AV device, TV will automatically turn on.

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide
this function)

Note: To operate SIMPLINK, an HDMI cable over Version 1.2 with *CEC function should be used. (*CEC: Consumer
Electronics Control).

SIMPLINK Menu

TTVV vv iieewwiinn gg

: Switch to the previous TV

channel regardless of the current mode.
DDIISSCC ppll aayybbaacckk

: Select and play discs.
When multiple discs are available, the titles
of discs are conveniently displayed at the
bottom of the screen.

VVCCRR ppllaayybbaa cckk

: Control the connected

VCR.
HHDDDD RReecc oorr ddiinnggss pp llaayy bbaacckk

: Control

recordings stored in HDD.
AAuu ddiioo OOuutt ttoo HHoo mmee TThheeaatteerr ssppeeaakk--

eerr//AAuudd iioo OO uutt ttoo TT VV

: Select Home
Theater speaker or TV speaker for Audio
Out.

SIMPLINK Functions

1

2

3

4

5

GG

When no device is connected
(displayed in gray)

GG

Selected Device

GG

When a device is connected
(displayed in bright color)

1

2

3

4

5

Display

SS IIMMPPLL IINN KK

menu.

Select the desired device.

Control connected AV devices.

1

TV

3

2

ENTER

ENTER

USB

50

USB

ENTRY MODES

When you connect a USB device, this screen is displayed automatically.
In USB device, you can not add a new folder or delete the existing folder.

Precautions when using the USB device

GG

Only a USB storage device is recognizable.

GG

If the USB storage device is connected through a
USB hub, the device is not recognizable.

GG

A USB storage device using an automatic recogni­tion program may not be recognized.

GG

A USB storage device which uses its own driver
may not be recognized.

GG

In case of a card reader, up to four memory cards
are concurrently recognizable.

GG

The recognition speed of a USB storage device
may depend on each device.

GG

Please do not turn off the TV or unplug the USB
device when the connected USB storage device is
working. When such device is suddenly separated
or unplugged, the stored files or the USB storage
device may be damaged.

GG

Please do not connect the USB storage device
which was artificially maneuvered on the PC. The
device may cause the product to malfunction or
fail to be played. Never forget to use only a USB
storage device which has normal music files or
image files.

GG

Please use only a USB storage device which was
formatted as a FAT or NTFS file system provided
with the Windows operating system. In case of a
storage device formatted as a different utility pro­gram which is not supported by Windows, it may
not be recognized.

GG

Please connect power to a USB storage device
which requires an external power supply. If not,
the device may not be recognized.

GG

Please connect a USB storage device with cable is
offered by USB maker. If connected with cable is
not offered by USB maker or an excessively long
cable, the device may not be recognized.

GG

Some USB storage devices may not be supported
or operated smoothly.

GG

File alignment method of USB storage device is
similar to Window XP and filename can recognize
up to 100 English characters.

GG

Please backup important files because data on
USB device may be damaged. Data management is
consumer's responsibility and as a result, the man­ufacturer does not cover data damage.

When removing the USB device

Connect the USB device to the

UUSSBB II NN

jacks on the side of TV.

3

Select

PPHHOO TTOO LLIISSTT orMM UU SSIICC LL IISS TT

1

USB IN

PHOTO LIST MUSIC LIST

Select

UUSS BB EEjj eecctt

.

Select the

UUSS BB EEjj eecctt

menu before removing the

USB device.

2

ENTER

1

Q. MENU

2

ENTER

* Except 32/37/42LG30DC

■

It doesn’t support USB HDD

■

This TV supports JPG and MP3.

PHOTO LIST

USB

51

You can view .JPG files from USB storage devices.
The On Screen Display on your model may be slightly different.

Screen Components

Moves to upper level file

Preview: Display the
thumbnail/folder name of
the photo in the selected
folder

Current page/Total pages

Total number of marked photos

Usable USB memory

Corresponding buttons on
the remote control

Supported photo file: *.JPG

■

You can play JPG files only.

■

Only baseline scan is supported among JPG.

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

Navigate PopUp Menu Move Page Mark Exit

2Folders, 4Files

3 4

5

1

1

2

Select

UUSSBB

.

Select

PPHHOO TTOO LLII SSTT

.

2

TOP FOLDER

Drive1

1

MENU

ENTER

ENTER

1

2

3

4

5

6

Drive1

CH

FAV

RETURN

6

USB

52

USB

Photo Selection and Popup Menu

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

2Folders, 4Files

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

1366x768 125KB

Select the target folder or drive.

Select the desired photos.

2

Show the Popup menu.

3

1

■

Use the

CC HH

button to navigation in the

photo page.

■

Use the

FFAAVV

button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all pho­tos in the folder in a slide show.

TOP FOLDER

Drive1

4

Select the desired Popup menu.

ENTER

ENTER

ENTER

Navigate Move Page Mark Ex it

CH

FAV

RETURN

PopUp Menu

Navigate Move Page Mark Exit

CH

FAV

RETURN

PopUp Menu

Drive1

Drive1

Butterfly

Upper Photo X.Box

1366x768
125KB

View

Mark All

Delete

Cancel

When you select a file (not folder), this PopUp
menu is displayed.

GG

VViieeww

: Display the selected item.

GG

MMaarrkk AAllll

: Mark all photos on the screen.

GG

UUnnmmaarrkk AA llll

: Deselect all marked photos.

GG

DDeell eettee

: Delete the selected photo item.

GG

CC aanncceell

: Close the pop-up menu.

USB

53

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full
screen mode.

■

Use the

CC HH

button to navigation in the

photo page.

The aspect ratio of a photo may change the size of
the photo displayed on the screen in full size.

1/17

Sideshow BGM Delete Option Hide

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

5

Select

VViieeww

.

The selected photo is displayed in
full size.

2

3

1

4

ENTER

ENTER

ENTER

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

2Folders, 4Files

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

1366x768 125KB

TOP FOLDER

Drive1

Navigate Move Page Mark Exit

CH

FAV

RETURN

PopUp Menu

Navigate Move Page Mark Exit

CH

FAV

RETURN

PopUp Menu

Drive1

Drive1

Butterfly

Upper Photo X.Box

1366x768
125KB

View

Mark All

Delete

Cancel

USB

54

USB

1/17

Sideshow BGM Delet e O ption Hide

Select the

SSiiddeesshhooww, BBGGMM

,

((RRoottaattee))

,

DDeell eettee,OOppttiioonn

, or

HHiiddee..

Press

FF GG

to set the time interval between slides.

Slide Speed

Fast

Cancel

...

Music Folder

ENTER

■

Use button to select the previous or
next photo.

■

Use button to select and control
the menu on the full-sized screen.

ENTER

6

GG

SS iidd eesshh ooww

: Selected photos are displayed during the
slide show. If no photo is selected, all photos in the cur­rent folder are displayed during slide show.

■

Set the time interval of the slide show in

OOpp tt iioo nn

.

■

A slide show continues for a maximum of 4 hours.
After 4 hours, the slide show will end and go to TV
mode or external input mode.

GG

BB GG MM

: Listen to music while viewing photos in full size.

■

Set the BGM device and album in

OOpp tt iioo nn

.

GG

((RRoottaattee))

: Rotate photos.

■

Rotates the photo 90°, 18 0 °, 270°, 360° clockwise.

GG

DDeell eettee

: Delete photos.

GG

OOpp tt iioo nn

: Set values for

SS lliiddee SSpp eeeedd

and

MM uuss iicc

FFoo lldd eerr

.

■

Use button and

EENN TT EERR

button to set values.

Then go to and press

EENN TT EERR

to save the set-

tings.

■

You cannot change

MM uussiicc FFoollddeerr

while BGM is

playing.

GG

HHiiddee

: Hide the menu on the full-sized screen.

■

To see the menu again on the full-sized screen, press
EENN TT EERR

button to display.

NOTE

!

GG

This TV will not be able to decode
most JPEG images saved using the
Progressive option.

MUSIC LIST

USB

55

You can use the Music List menu to play MP3 files form a USB storage device.
This TV cannot play back copy-protected files.
The On Screen Display on your model may be slightly different.

Screen Components

Supported music file: *.MP3

Bit rate range 40Kbps ~ 320Kbps

• Sampling rate (Sampling Frequency)
MPEG1 : 32000, 44100, 48000Hz
MPEG2 : 16000, 24000, 22050Hz
MPEG2.5 : 16 ~ 48KHz

Moves to upper level file

Preview: If any album jacket
for the file exists, this jack­et is displayed.

Current page/Total pages

Total number of marked
musics

Usable USB memory

Corresponding buttons on
the remote control

1

3

4

5

6

2

Select

UUSSBB

.

Select

MM UU SSIICC LLIISS TT

.

1

2

MENU

ENTER

ENTER

USB Device

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Title Play Time

Upper

Good Bye

Arirang 04:12

05:30

3 4

5

1

2

Navigate PopUp Menu Move Page Mark Exit

CH

FAV

RETURN

6

Page 1/1

No Marked

Drive1

Arirang

USB

56

USB

Music Selection and Popup Menu

■

Use the

CC HH

button to navigation in

the music page.

■

Use

FFAAVV

button to mark or unmark a music
file. If no music is marked, all the music in the
folder will be played in sequence. When one or
more music files are marked, the marked music
files will be played in sequence. If you want to
listen to only one song repeatedly, just mark
that one file and play.

Up to 6 music titles are listed per page.

Select the target folder or drive.

Select the desired musics.

Show the Popup menu.

Select the desired Popup menu.

2

3

1

4

ENTER

ENTER

ENTER

5

RETURN

Return to TV viewing

USB Device

Page 1/1

No Marked

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Drive1

Arirang

Navigate Move Page Mark Exit

CH

FAV

RETURN

PopUp Menu

Play TimeTitle

Upper

Good Bye

Arirang

USB Device

Page 1/1

No Marked

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Drive1

Arirang

Navigate Move Page Mark Exit

CH

FAV

RETURN

PopUp Menu

Play TimeTitle

Upper

Good Bye

Arirang

05:30

04:12

3945 KB
128 Kbps

Play

Play with Photo

Mark All

Delete

Cancel

GG

PPllaayy

(During stop): Play the selected music.

Once a song finishes playing, the next selected
one will be played. When there are no selected
musics to play, the next one in the current fold­er will be played. If you go to a different folder
and press the

EENN TT EERR

button, the current

music in playback will stop.

GG

PPllaayy MMaarrkk eedd

: Play the selected musics. Once
a music finishes playing, the next selected one
will be played automatically.

GG

SS tt oopp PPll aayy

(During playback): Stop the play-

ing musics.

GG

PPllaayy wwiitthh PPhhoott oo

: Start playing the selected

musics and then move to the Photo List.

GG

MM aarr kk AAll ll

: Mark all musics in the folder.

GG

UUnnmmaarrkk AA llll

: Deselect all marked music.

GG

DDeell eettee

: Delete the selected music.

GG

CC aanncceell

: Close the pop-up menu.

USB

57

■

The play information box (as shown below) will automatically
move across the screen when there is no user input to pre­vent a fixed image remaining on the screen for a extended
period of time.

NOTE

!

GG

When music is playing, is displayed in front of the music play time.

GG

A damaged or corrupted music file that does not play displays 00:00 as the play time.

GG

Music files with copy-protection will not play.

GG

Press

EENN TT EERR

, AA, or

RREETT UU RRNN

button to stop the screen saver.

GG

This TV can not play music files less than 16 Kbytes.

PICTURE CONTROL

58

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

■

RGB-PC input source use 4:3 or 16:9 aspect ratio.

NOTE

!

GG

If a fixed image is displayed on the screen for a long time, the image could become imprinted on the
screen and remain visible.

This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watch­ing video that did not fill the screen, any after-image from the black bars will normally dissipate after a few
minutes.

■

You can also adjust

AAssppeecctt RR aattiioo

in

the

QQ --MM ee nnuu

.

Enter

Move

PICTURE

E

Enter

Move

PICTURE

E

RG

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

RG

Set By Program

4:3

16:9

Zoom1

Zoom2

Just Scan

Select

PPIICCTTUURREE

.

Select

AAssppeecctt RR aattiioo

.

Select the desired picture format.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PICTURE CONTROL

59

Set by program

Selects the proper picture proportion to match
the source’s image.

4:3

Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.

16 : 9

Adjust the picture horizontally, in a linear pro­portion to fill the entire screen.

Zoom 1

Choose Zoom 1 when you want to view the pic­ture without any alteration. However, the top and
bottom portions of the picture will be cropped.

Zoom 2

Choose Zoom 2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.

Just Scan

Normally the edges of video signals are cropped
1-2%. Just Scan turns off this cropping and
shows the complete video.

Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.

JJuusstt SSccaann

operates only in
DTV/CADTV/Component/HDMI-DTV/DVI-DTV
(720p/1080i/1080p) input source.

(4:3 4:3)

(16:9 16:9)

PICTURE CONTROL

60

PRESET PICTURE SETTINGS

PICTURE CONTROL

Picture Mode - Preset

There are factory presets for picture settings available in the user menus. You can use a preset, change each
setting manually, or use the Intelligent Sensor.

Enter

Move

PICTURE

E

Select

PPIICCTTUURREE

.

Select

PPiiccttuu rree MM ooddee

.

Select

IInntteelllliiggeenntt SSeennssoorr

(Except

32/37/42LG30DC),

VVii vv iidd,SS ttaanndd aarrdd

,

CCiinn eemmaa, SS ppoorrtt

, or

GGaammee

.

■

When selecting

IInntt eell lliiggeenntt SS eennssoorr
(Except 32/37/42LG30DC),
the most suitable picture is automatically

adjusted according to the surrounding
conditions.

■

VVii vv iidd, SS ttaanndd aarrdd, CCiinn eemmaa, SS ppoorrtt

, and

GGaammee

Settings are preset for the opti­mum picture quality at the factory and
are not adjustable.

■

You can also adjust

PPiiccttuu rree MM ooddee

in

the

QQ .. MMeennuu

.ratio changes to Just scan.

1

MENU

3

2

ENTER

ENTER

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

RG

Intelligent Sensor

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

RG

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Only for

47/52LG50DC

PICTURE CONTROL

61

Color Tone - Preset

Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to
cool to see less intense colors with more blue.

Enter

Move

PICTURE

E

Select

PPIICCTTUURREE

.

Select

CC oolloorr TTeemmpp eerraattuu rree

.

1

MENU

3

ENTER

Select

CC ooooll, MM eedd iiuumm

, or

WWaarrmm

.

4

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

Select

AAddvvaanncc eedd CC oonntt rrooll

.

2

ENTER

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

RG

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Color Temperature

FF

Medium

GG

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

Close

PICTURE CONTROL

62

MANUAL PICTURE ADJUSTMENT

PICTURE CONTROL

Picture Mode - User Mode

Adjust the picture appearance to suit your preference and viewing situations.
This feature is disable in “

PP iicctt uurr ee MM oo ddee--IInntteelllliiggeenntt SS eenn ssoorr

”.

Enter

Move

PICTURE

Select

PPIICCTTUURREE

.

Make appropriate adjustments.

Select

BBaacckkll iigghhtt, CC oonnttrraasstt, BBrriigghhtt nneessss

,

SS hhaarrppnnee ssss, CC oolloo rr

, or

TTiinn tt

.

1

MENU

Select

PPiiccttuu rree MM ooddee

.

2

ENTER

Select

VVii vv iidd,SS ttaanndd aarrdd, CCiinn eemmaa, SS ppoorrtt

, or

GGaammee

.

3

ENTER

4

ENTER

5

ENTER

E

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

RG

• Backlight 80

EE

EE

EE

EE

Enter

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PICTURE CONTROL

63

Select your desired menu option.

Select

PPIICCTTUURREE

.

Select

PPiiccttuu rree MM ooddee

.

Select

EExxppeerrtt CCoonnttrr ooll

.

Select

EExxpp eerrtt11

or

EExxpp eerrtt22

.

1

MENU

3

2

ENTER

ENTER

4

ENTER

5

ENTER

Make appropriate adjustments.

6

Picture Mode - Expert Control

By segmenting categories,

EExx ppeerrtt11

and

EExx ppeerrtt22

provide more categories which users can set as they see

fit, offering the optimal picture quality for users.

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

RG

Sport

Game

Expert1

Expert2

7

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Expert Control

• Reset

Screen (RGB-PC)

RG

FF

Off

GG

Fresh Contrast

Noise Reduction

Off

Gamma

Medium

Black Level

Off

Off

Real Cinema

Color Standard

SD

White Balance

Normal

• Method

2 Points

• Red Contrast

50

• Green Contrast

50

• Blue Contrast

50

E

PICTURE CONTROL

64

PICTURE IMPROVEMENT TECHNOLOGY

PICTURE CONTROL

Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection.
Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors.
Noise Reduction: Removes interference up to the point where it does not damage the original picture.
Gamma: High gamma values display whitish images and low gamma values display high contrast images.

Select

PPIICCTTUURREE

.

Select

AAddvvaanncc eedd CC oonntt rrooll

.

Select

FFrreesshh CCoonntt rr aa sstt, FFrreesshh CCoolloorr, NNooiiss ee

RReedduucc tt iioo nn

, or

GGaamm mmaa

.

1

MENU

3

2

ENTER

ENTER

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Select your desired options.

4

Color Temperature

Medium

Fresh Contrast

FF

Off

GG

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

Close

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

PICTURE CONTROL

65

ADVANCED CONTROL - BLACK (DARKNESS) LEVEL

Adjusting the contrast and the brightness of the screen using the black level of the screen.
This feature is disabled in DTV and RGB-PC mode.

Select

PPIICCTTUURREE

.

Select

AAddvvaanncc eedd CC oonntt rrooll

.

Select

BBllaacc kk LLeevveell

.

1

MENU

3

2

ENTER

ENTER

Select

LL ooww

or

HHiigg hh

.

4

■

LL ooww

: The reflection of the screen gets

darker.

■

HHiigg hh

: The reflection of the screen gets

brighter.

■

AAuutt oo

: Realizing the black level of the
screen and set it to High or Low auto­matically.

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

FF

Low

GG

Eye Care

Off

Real Cinema

Off

TruMotion

High

Close

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

PICTURE CONTROL

66

ADVANCED CONTROL - EYE CARE

PICTURE CONTROL

Dims extremely bright pictures.
This feature is disabled in “

PP iicctt uurr ee MMooddee-- VV iivviidd, CCiinneemm aa

”.

Select

PPIICCTTUURREE

.

Select

AAddvvaanncc eedd CC oonntt rrooll

.

Select

EEyyee CCaa rree

.

1

MENU

3

2

ENTER

ENTER

Select

OO nn

or

OO ff ff

.

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

FF

Off

GG

Real Cinema

Auto

TruMotion

High

Close

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

PICTURE CONTROL

67

ADVANCED CONTROL - REAL CINEMA

Set up the TV for the best picture appearance for viewing movies.
When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps

video from movies to 30 fps video for display.
This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i,

and HDMI 1080i mode.
47/52LG50DC only: This TV ouputs 48Hz in DTV, Component, and HDMI 1080p (24Hz).

Select

PPIICCTTUURREE

.

Select

AAddvvaanncc eedd CC oonntt rrooll

.

Select

RReeaall CC iinn eemmaa

.

1

MENU

3

2

ENTER

ENTER

Select

OO nn

or

OO ff ff

.

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

FF

Off

GG

Close

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

PICTURE CONTROL

68

PICTURE RESET

PICTURE CONTROL

Settings of the selected picture modes return to the default factory settings.

Select

PPIICCTTUURREE

.

Select

RReess eett

.

Initialize the adjusted value.

1

MENU

3

2

ENTER

ENTER

4

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Enter

Move

PICTURE

E

• Contrast 50

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

RG

Resetting video configuration...

ii

PICTURE CONTROL

69

POWER INDICATOR

Select

OOPPTT IIOO NN

.

Select

PPoowweerr II nnddiiccaa tt oorr

.

1

MENU

2

ENTER

Select

SS tt aannddbbyy LLiigg hhttorPPoowweerr LL iigghhtt

.

3

ENTER

Select your desired options.

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■

SS tt aannddbbyy LLiigg hhtt

: You can set the
brightness of the LED on the front side
of the TV during power standby.

■

PPoowweerr LL iigghhtt

: You can set the the LED
on the front side of the TV to be turned
on or off while watching the TV.

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Power Light

Standby Light

On

Close

FF

Off

GG

SOUND & LANGUAGE CONTROL

70

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME)

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a
regular TV program.

Select

AAUUDDIIOO

.

Select

AAuuttoo VVoo lluummee

.

Select

OO nn

or

OO ff ff

.

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

1

MENU

3

2

ENTER

ENTER

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Auto Volume : On

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Off

On

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

71

PRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate
sound options based on the program content.

SS ttaann dd aarrdd, MM uussiicc, CCiinneemm aa, SS ppoo rr tt

, and

GGaamm ee

are preset for optimum sound quality at the factory and are

not adjustable.

Select

AAUUDDIIOO

.

Select

SS oouunndd MM ooddee

.

Select

SS tt aa nnddaarrdd, MM uuss iicc

,

CC iinneemmaa, SS ppoorr tt

, or

GGaamm ee

.

1

MENU

3

2

ENTER

ENTER

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Standard

Music

Cinema

Sport

Game

■

You can also adjust

SS oouunndd MM ooddee

in

the

QQ .. MMeennuu

.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

72

SOUND & LANGUAGE CONTROL

SOUND SETTING ADJUSTMENT - USER MODE

SRS TRUSURROUND XT

Adjust the sound to suit your taste and room situations.

Select

AAUUDDIIOO

.

Select

SS oouunndd MM ooddee

.

Select

TTrreebbllee

or

BBaass ss

.

1

MENU

4

2

ENTER

Select

SS tt aa nnddaarrdd, MM uuss iicc

,

CC iinneemmaa, SS ppoorr tt

, or

GGaamm ee

.

3

ENTER

ENTER

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Select

AAUUDDIIOO

.

Select

SS RR SS TTrruuSSuu rrrroouunndd XX TT

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

■

SS RR SS TTrruuSSuurrrroouunndd XXTT

: Takes advantage of
any multi-channel format without needing to
add extra speakers or equipment. Dialog clarity,
bass enrichment, and the addition of stereo
audio enhancement produces an immersive
sound experience from standard stereo material.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Close

EE

EE

Treble 50

Bass 50

SRS TruSurround XT

Off

Make appropriate adjustments.

5

ENTER

SOUND & LANGUAGE CONTROL

73

CLEAR VOICE

By differentiating the human sound range from others, it improves the sound quality of voices.

■

If you select “

CC lleeaa rr VVooiiccee-- OO nn

”,

SS RR SS

TTrr uuSS uurr rroo uunndd XXTT

feature will not

work.

■

You can also adjust

CC lleeaa rr VVooiiccee

in the

QQ --MM ee nnuu

.

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Off

On

Select

AAUUDDIIOO

.

Select

CC lleeaa rr VVoo iiccee

.

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

74

BALANCE

SOUND & LANGUAGE CONTROL

Select

AAUUDDIIOO

.

Select

BBaall aa nnccee

.

Make appropriate adjustments.

1

MENU

3

2

ENTER

ENTER

Adjust the left/right sound of speaker to suit your taste and room situations.

Enter

Move

AUDIO

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

LR

E

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Close

EE

EE

Balance 0

LR

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

75

TV SPEAKERS ON/OFF SETUP

Turn the TV speakers off if using external audio equipment.

Enter

Move

AUDIO

E

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Select

AAUUDDIIOO

.

Select

TTVV SSppeeaakk eerr

.

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

LR

Enter

Move

AUDIO

E

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

LR

Off

On

SOUND & LANGUAGE CONTROL

76

AUDIO RESET

SOUND & LANGUAGE CONTROL

Settings of the selected Sound Mode return to the default factory settings.

Select

AAUUDDIIOO

.

Select

RReess eett

.

1

MENU

2

ENTER

Initialize the adjusted value.

3

ENTER

Enter

Move

AUDIO

E

LR

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Resetting audio configuration...

ii

4

MENU

Return to TV viewing.

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

SOUND & LANGUAGE CONTROL

77

STEREO/SAP BROADCAST SETUP

For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom­panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used
if the broadcast is only in Mono.

Q.Menu

Close

3

16:9

Vivid

Off

Standard

Off

FF

English

GG

Off

Add

Eject

Aspect Ratio

Backlight

Clear Voice

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

USB Eject

CH

Select

SS AAPP

.

Select

MM oonnoo, SS tt ee rr eeoo

, or

SS AAPP

.

Return to TV viewing.

1

Q. MENU

3

2

Q. MENU

Select

MM uullttii AAuuddiioo

.

Select other languages.

Return to TV viewing.

1

Q. MENU

3

2

Q. MENU

Analog TV Digital TV

SOUND & LANGUAGE CONTROL

78

AUDIO LANGUAGE

SOUND & LANGUAGE CONTROL

Other languages may be available if a digital signal is provided by the broadcasting station.
This feature operates only in DTV/CADTV mode.

Select

OOPPTT IIOO NN

.

Select

LLaanngguu aa ggee

.

Select

AAuuddii oo

.

1

MENU

3

2

ENTER

ENTER

Select your desired language:
EEnnggllii sshh, SS ppaa nnii sshh

, or

FFrreenn cc hh

4

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Menu

English

Audio

FF

English

GG

Close

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

79

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.

Select

OOPPTT IIOO NN

.

Select

LLaanngguu aa ggee

.

Select

MM eennuu

.

1

MENU

3

2

ENTER

ENTER

Select your desired language.
From this point on, the on-screen menus

will be shown in the selected language.

4

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Menu

FF

English

GG

Audio

English

Close

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

80

CAPTION MODE

SOUND & LANGUAGE CONTROL

Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying cap­tioning information if provided on a program. Analog caption displays information at any position on the screen
and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both
digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode
which was last set when you turned the power off. This function is only available when

CCaappttiioo nn

Mode is set

OO nn

.

Select

OOPPTT IIOO NN

.

Select

CC aapp tt iioo nn

.

Select

OO nn

.

1

MENU

3

2

ENTER

ENTER

Select

CC CC11-44

or

TTeexxtt11-44

.

4

Enter

Move

OPTION

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : CC1

Set ID : 1

Power Indicator

Initial Setting : Home

Mode

CC1

Close

Digital Option

FF

On

GG

Analog Broadcasting System Captions

■

When selecting

OO ff ff

, Sub-menus for
Analog, DTV, and Digital Option
become disabled.

■

CC AAPPTT IIOO NN

The term for the words that scroll
across the bottom of the TV screen;
usually the audio portion of the pro­gram provided for the hearing impaired.

■

TTEEXXTT

The term for the words that appear in a
large black frame and almost cover the
entire screen; usually messages provid­ed by the broadcaster.

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

81

Digital Broadcasting System Captions

Choose the language you want the DTV/CADTV Captions to appear in.
Other Languages can be chosen for digital sources only if they are included on the program.
This function in only available when Caption Mode is set On.

Select

OOPPTT IIOO NN

.

Select

CC aapp tt iioo nn

.

Select

OO nn

.

1

MENU

3

2

ENTER

ENTER

Select

CC CC11-44, TTeexxtt11-44

, or

SS eerr vv iiccee11- 66

.

4

Enter

Move

OPTION

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : CC1

Set ID : 1

Power Indicator

Initial Setting : Home

Mode

CC1

Close

Digital Option

FF

On

GG

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

82

SOUND & LANGUAGE CONTROL

Caption Option

Customize the DTV/CADTV captions that appear on your screen.
This function in only available when Caption Mode is set On.

Enter

Move

OPTION

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : CC1

Set ID : 1

Power Indicator

Initial Setting : Home

Mode

Service1

Close

Digital Option

FF

On

GG

Select

OOPPTT IIOO NN

.

Select

CC aapp tt iioo nn

Select

OO nn

.

1

MENU

3

2

ENTER

ENTER

Select

CC uussttoo mm

.

5

ENTER

Customize the

SS ttyyllee, FFoo nntt

, etc., to your
preference. A preview icon is provided at
the bottom of the screen, use it to see the
caption language.

6

Select

DDii ggii tt aall OOpp tt iioo nn

.

4

Size

A Standard

Font

Font 1

Text Color

White

Text Opacity

Solid

Edge Type

None

Edge Color

Black

Bg Color

Black

Bg Opacity

Solid

Close

FF

Custom

GG

■

SS ii zzee

: Set the word size.

■

FFoo nntt

: Select a typeface for the text.

■

TTeexxtt CCooll oorr

: Choose a color for the

text.

■

TTeexxtt OO ppaa cc iittyy

: Specify the opacity

for the text color.

■

BBgg ((BBaacckkgg rroouunndd)) CC oolloo rr

: Select a

background color.

■

BBgg ((BBaacckkgg rroouunndd)) OOpp aacciittyy

: Select

the opacity for the background color.

■

EEddggee TTyyppee

: Select an edge type.

■

EEddggee CC oolloo rr

: Select a color for the

edges.

7

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

TIME SETTING

83

CLOCK SETTING

TIME SETTING

Auto Clock Setup

The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly by the auto clock function.

Enter

Move

TIME

Enter

Move

TIME

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Year

Month

2

Date

21

Hour

2 AM

2008

Minute

10

Time Zone

Eastern

Daylight
Saving

Auto

Close

FF

Auto

GG

Select

TTII MMEE

.

Select

CC lloo cc kk

.

Select

AAuutt oo

.

1

MENU

3

2

ENTER

ENTER

Select your viewing area time zone.

• U.S.A:

EEaass tt eerr nn, CC ee nntt rr aall, MM oouu nntt aaiinn

,

PPaacciiff iicc, AAll aasskkaa

, or

HHaaww aaiiii

.

• Canada:

EEaa sstteerrnn, CC eenntt rraall, MM oouunn tt aa iinn

,

PPaacciiff iicc, NNeeww FF..llaanndd

, or

AAttll aanntt iicc

.

4

Select

AAuutt oo, OOff ff

, or

OO nn

(depending on
whether or not your viewing area observes
Daylight Saving time).

5

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

TIME SETTING

84

TIME SETTING

Manual Clock Setup

If the current time setting is wrong, set the clock manually.

Enter

Move

TIME

Enter

Move

TIME

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Year

Month

2

Date

21

Hour

2 AM

2008

Minute

10

Time Zone

Eastern

Daylight
Saving

Auto

Close

FF

Manual

GG

Select

TTII MMEE

.

Select

CC lloo cc kk

.

Select

MM aannuuaall

.

1

MENU

3

2

ENTER

ENTER

Select the Year, Month, Date, Hour, or Minutes
option.

4

Set the Year, Month, Date, Hour, or Minutes
option.

5

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

TIME SETTING

85

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set.
The

OO ff ff TT iimm ee

function overrides the

OO nn TTii mm ee

function if they are both set to the same time.

The TV must be in standby mode for the

OO nn TTii mm ee

to work.

If you do not press any button within 2 hours after the TV turns on with the

OO nn TTii mm ee

function, the TV will

automatically revert to standby mode.

■

To cancel

OOnn// OO ff ff TT iimmee

function, select

OO ff ff

.

■

Only for On Time function

Select

II nnppuutt

.

Select the desired input source.

Enter

Move

TIME

Enter

Move

TIME

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : 6:30 AM (Once)

Sleep Timer : Off

Auto Sleep : Off

Repeat

FF

Once

GG

Hour

6 AM

Minute

30

Input

TV

Channel

TV 2-0

Volume

30

Close

Select

TTII MMEE

.

Select

OOffff tt iimm ee

or

OOnn ttiimmee

.

Select

RReeppeeaatt

.

1

MENU

3

2

ENTER

ENTER

Select

OO ff ff, OOnnccee, EEvveerryyddaa yy, MM oonn~FFrr ii

,

MM oonn~SS aatt, WWeeeekk eenndd

, or

SS uunnddaa yy

.

4

Select and set

HHoo uurr

or

MM iinn uuttee

.

5

1

ENTER

3

4

2

When Selecting

TT VV

:

set the channel at turn-on.

Adjust to sound level at
turn-on.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

TIME SETTING

86

TIME SETTING

SLEEP TIMER SETTING

The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.

■

You can also adjust

SS lleeeepp TTiimmeerr

in

the

QQ --MM ee nnuu

.

Enter

Move

TIME

Enter

Move

TIME

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Select

TTII MMEE

.

Select

SS lleeeepp TTiimmeerr

.

Select

OOff ff, 1100, 2200, 3300, 6600, 9900

,

1122 00, 1188 00

, or

2244 00

minutes.

1

MENU

3

2

ENTER

ENTER

Close

FF

Off

GG

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

TIME SETTING

87

AUTO SHUT-OFF SETTING

TV will be automatically turned off, in case of no signal for 10 minutes.

Enter

Move

TIME

Enter

Move

TIME

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : On

Select

TTII MMEE

.

Select

AAuutt oo SSlleeeepp

.

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

Off

On

TV will be automatically turned off,
in case of No Signal for 10 minutes.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

88

PARENTAL CONTROL / RATINGS

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad­casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the
type of the program and the categories. It is also possible to block all program viewing for a time period. To use
this function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be
blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to­video movies use the Movie Rating System (MPAA)only.

Ratings for Television programs including made-for-TV movies :

■

TV-G(General audience

)

■

TV-PG(Parental guidance suggested

)

■

TV-14(Parents strongly cautioned

)

■

TV-MA (Mature audience only

)

■

TV-Y(All children

)

■

TV-Y7(Children 7 years older

)

Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required to gain access to this menu.

Setting up Your Password

For USA

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

For Canada

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Close

Enter Password

* * * *

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

■

Enter the password as requested.

■

The TV is set up with the initial pass­word “0-0-0-0”.

SET PASSWORD & LOCK SYSTEM

PARENTAL CONTROL / RATING

89

Enables or disables the blocking scheme you set up previously.

Lock System

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

LLoo cc kk SS yyss tt eemm

.

Select

OO nn

or

OO ff ff

.

4

3

ENTER

Enter

Move

LOCK

Lock System : On

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Off

On

■

When you select

OO nn

, the Lock System

is enable.

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

90

PARENTAL CONTROL / RATINGS

Change the password by inputting a new password twice.

Set Password

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

SS eett ppaassssww oorrdd

.

Choose any 4 digits for your new password.
As soon as the 4 digits are entered, re-enter

the same 4 digits on the

CC oonnff iirrmm

.

4

3

ENTER

1

456

7809

23

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

New

* * * *

Confirm

* * * *

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

91

CHANNEL BLOCKING

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

BBlloocckk CC hhaa nnnn eell

.

Select a channel to block or unblock.

4

3

ENTER

Block or unblock a channel.

5

ENTER

Blocks any channels that you do not want to watch or that you do not want your children to watch.

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

6

MENU

Return to the previous menu.

RETURN

Return to TV viewing.

Block/Unblock

Move Page

CH

Move

Previous

MENU

Exit

RETURN

PARENTAL CONTROL / RATING

92

MOVIE & TV RATING

PARENTAL CONTROL / RATINGS

Movie Rating (MPAA)

-

For USA only

Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can
set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that
the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

MMoo vviiee RRaattii nngg

.

Select GG,

PPGG, PPGG--1133, RR, NNCC--1177

,

XX

, or

BBll oocckkii nngg OOffff

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Blocking off : Permits all programs

G

PG

PG-13

R

NC-17

X

Blocking Off

■

G (General audience)

■

PG (Parental guidance suggested)

■

PG-13 (Parents strongly cautioned)

■

R (Restricted)

■

NC-17 (No one 17 and under admitted)

■

X (Adult only)

■

Blocking Off (Permits all programs)

GG

If you set PG-13: G and PG movies will
be available, PG-13, R, NC-17 and X will
be blocked.

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

93

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

TTVV RRaattiinngg--CChhiill ddrreenn

.

Select

AAggee

or

FFaannttaassyy VVii oolleennccee

.

4

3

ENTER

Select block options.

5

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

■

Age (applies to TV-Y, TV-Y7)

■

Fantasy Violence (applies to TV-Y7)

TV Rating Children

-

For USA only

Prevents children from watching certain children's TV programs, according to the ratings limit set. The children
rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi­ences in the TV Rating - sub menu, your children can view those programs.

Close

Age

Fantasy Violence

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

94

PARENTAL CONTROL / RATINGS

TV Rating General

-

For USA only

Based on the ratings, blocks certain TV programs that you and your family do not want to view.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

TTVV RRaattiinngg--GGeenneerr aall

.

Select

AAggee, DDii aa lloo gguuee, LLaanngguuaa ggee

,

SS eexx

or

VVii oolleenn cc ee

.

4

3

ENTER

Select block options.

5

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

■

Age (applies to TV-G,TV-PG,TV-14,TV­MA).

■

Dialogue-sexual dialogue (applies to
TV-PG,TV-14).

■

Language-adult language (applies to
TV-PG, TV-14, TV-MA).

■

Sex-sexual situations (applies to TV-PG,
TV-14, TV-MA).

■

Violence (applies to TV-PG, TV-14, TV­MA).

Close

Age

Dialogue

Language

Sex

Violence

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

95

TV Rating English

-

For CANADA only

Selecting canadian english language rating system.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Select

TTVV RRaattiinngg--EEnnggll iiss hh

.

Select EE, CC,

CC 88++, GG, PPGG, 1144 ++

,

1188 ++

, or

BBll oocckkii nngg OOffff

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all programs

E

C

C8+

G

PG

14+

18+

Blocking Off

■

E (Exempt)

■

C (Children)

■

C8+ (Children eight years and older)

■

G (General programming, suitable for
all audiences)

■

PG (Parental Guidance)

■

14+ (Viewers 14 years and older)

■

18+ (Adult programming)

■

Blocking Off (Permits all programs)

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

96

PARENTAL CONTROL / RATINGS

TV Rating French

-

For CANADA only

Selecting canadian french language rating system.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Select

TTVV RRaattii nngg--FFrreenncchh

.

Select EE, GG,

88aa nnss ++, 1133aannss++

,

1166aannss++, 1188aannss++

, or

BBlloocckkiinngg ooffff

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all programs

E

G

8ans+

13ans+

16ans+

18ans+

Blocking Off

■

E (Exempt)

■

G (General)

■

8ans+ (General-Not convenient for lit­tle children)

■

13ans+ (Not convenient for children of
13 years and younger)

■

16ans+ (Not convenient for children of
16 years and younger)

■

18ans+ (This programs is only for
adults)

■

Blocking off (Permits all programs)

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

97

DOWNLOADABLE RATING

This function may become available in the future and will be available only for digital channels.
This function operates only when TV has received Region5 Rating data.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Humor

Sport

Cruelty

Language

Sadness

Genre

Age

Close

E

E

Select

DDoowwnnlloo aadd aabb llee RRaattiinngg

.

Select desired

DDoowwnnll ooaadd aabb llee

RRaattii nngg

option.

4

3

ENTER

Select desired option and block it.

5

ENTER

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■

Based on rating table, your TV's OSD
(On Screen Display) may differ slightly
from what is shown in this manual.

PARENTAL CONTROL / RATING

98

PARENTAL CONTROL / RATINGS

EXTERNAL INPUT BLOCKING

Enables you to block an input.

Select

IInnppuutt BB lloocckk

.

Select input source.

4

3

Select

OO nn

or

OOff ff

.

5

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

LLOO CCKK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

AV1

FF

Off

GG

AV2

Off

Component1

Off

HDMI1

Off

RGB-PC

Off

Component2

Off

HDMI2

Off

Close

PARENTAL CONTROL / RATING

99

KEY LOCK

The TV can be set up so that it can only be used with the remote control.
This feature can be used to prevent unauthorized viewing by locking out the front panel controls.
This TV is programmed to remember which option it was last set to even if you turn the TV off.

Select

OOPPTT IIOO NN

.

Select

KKeeyy LLoocckk

.

Enter

Move

OPTION

Enter

Move

OPTION

1

MENU

2

ENTER

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Off

On

Select

OO nn

or

OO ff ff

.

3

ENTER

■

In

KKeeyy LLoocckk‘OO nn

’, if the TV is turned

off, press the

rr

/ I, INPUT, CH

((

DDEE

or

))

button on the TV or POWER,

INPUT, CH or NUMBER buttons
on the remote control.

■

With the

KKeeyy LLoocckk OO nn

, the display

‘

KKeeyy LLoocckk

’ appears on the screen
if any button on the front panel is
pressed while viewing the TV.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

!

APPENDIX

100

APPENDIX

TROUBLESHOOTING

TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..

TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..

No picture &No sound

No or poor color

or poor picture

Poor reception on

some channels

Lines or streaks

in pictures

No picture

when connecting HDMI

Horizontal/vertical bars

or picture shaking

Picture appears slowly

after switching on

The remote control

doesn’t work

Power is suddenly

turned off

■

Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.

■

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

■

Ensure that the correct remote operating mode is set: TV, VCR etc.

■

Install new batteries.

■

Is the sleep timer set?

■

Check the power control settings. Power interrupted.

■

Check whether the product is turned on.

■

Try another channel. The problem may be with the broadcast.

■

Is the power cord inserted into wall power outlet?

■

Check your antenna direction and/or location.

■

Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.

■

This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.

■

Adjust Color in menu option.

■

Keep a sufficient distance between the product and the VCR.

■

Try another channel. The problem may be with the broadcast.

■

Are the video cables installed properly?

■

Activate any function to restore the brightness of the picture.

■

Check for local interference such as an electrical appliance or power tool.

■

Station or cable product experiencing problems, tune to another station.

■

Station signal is weak, reorient antenna to receive weaker station.

■

Check for sources of possible interference.

■

Check antenna (Change the direction of the antenna).

■

Check HDMI cable over version 1.3.

The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen
display. In this case use the latest cables that support HDMI version 1.3.