LG 32EP950-B User manual
Owner’s Manual
OLED MONITOR
Please read this manual carefully before operating your set and retain it for future reference.
32EP950
www.lg.com
Copyright 
2021 LG Electronics Inc. All Rights Reserved.
<![endif]>ENGLISH
TABLE OF CONTENTS |
|
LICENSE.......................................................... |
2 |
OPEN SOURCE SOFTWARE NOTICE |
|
INFORMATION................................................ |
3 |
ASSEMBLING AND PREPARING...................... |
3 |
USING THE MONITOR................................... |
12 |
USER SETTINGS............................................ |
15 |
TROUBLESHOOTING..................................... |
21 |
PRODUCT SPECIFICATION............................. |
23 |
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
* 
2
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge. com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
ASSEMBLING AND PREPARING
CAUTION
•• Always use genuine LG components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of unauthorised components.
•• It is recommended that use the supplied components.
•• If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•• Illustrations in this document represent typical procedures, so they may look different from the actual product.
•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
•• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.
•• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.
<![endif]>ENGLISH
3
<![endif]>ENGLISH
NOTE
•• The components may look different from those illustrated here.
•• Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
•• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.
•• The power cord provided may differ depending upon the region.
Supported Software
You can download and install the latest version from the LGE website (www.lg.com).
••
/
/
Product and Button Description
Power LED
Joystick Button 
Power LED
•• White: On mode
•• Amber: ABL (Automatic Brightness Limiter) mode
•• Off: Off mode
4
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/ down with your finger.
Basic Functions
Power on: Press the joystick button once with your finger to turn on the monitor.
Power off: Press and hold the joystick button once more than 5 seconds with your finger to turn off the monitor. Volume control: You can control the volume by moving the joystick button left/right.
Displays the information on the current input.
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.
•• Place the monitor in the original box or packing material before attempting to move it.
•• Before moving or lifting the monitor, disconnect the power cord and all other cables.
•• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•• When holding the monitor, the screen should face away from you to prevent it from being scratched.
•• When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
<![endif]>ENGLISH
5
<![endif]>ENGLISH
CAUTION
•• Avoid touching the monitor screen as much as possible.
-- This may result in damage to the screen or some of the pixels used to create images.
•• Standing the monitor panel up vertically may cause the monitor to fall due to the joystick and cause damage or injury. In addition, this may cause the joystick button to malfunction.
Installing on a Table
•• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from the wall to ensure sufficient ventilation.
: 100 mm
6
CAUTION
•• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•• Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
•• If you need another power cord, please contact your local dealer or the nearest retail store.
Adjusting the Stand Height
1Place the monitor mounted on the stand base in an upright position.
2Handle the monitor with both hands for safety.
Max 110.0 mm
WARNING
•• When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
Adjusting the Angle
1Place the monitor mounted on the stand base in an upright position.
2Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 20° for a comfortable viewing experience.
WARNING
•• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below.
•• Be careful not to touch or press the screen area when adjusting the angle of the monitor.
NOTE
•• The left or right side of the monitor head can be slightly rotated up or down (up to 3°). Adjust the horizontal level of the monitor head.
<![endif]>ENGLISH
7
<![endif]>ENGLISH
Pivot Feature |
1 Raise the monitor up to the maximum height. |
The pivot feature allows the monitor to rotate 90° clockwise. |
|
WARNING |
|
•• When using the Pivot function, do not rotate the monitor too fast or with excessive force. The table may be |
|
scratched by contact with the monitor’s head. |
|
-- The head may come in contact with the stand and scratch the base. |
|
-- Be careful as you may injure your finger by jamming it between the head and the stand. |
|
Monitor’s head
2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
Stand
8
3 Rotate the monitor clockwise as shown in the figure.
4 Complete the installation by rotating the monitor 90° as shown in the figure.
NOTE
•• Auto Pivot feature of the display is not supported.
•• The screen can be rotated easily using the screen pivot shortcut key provided with your Windows operating system. Note that some Windows versions and some graphics card drivers may use different settings for the screen pivot key or may not support the pivot key at all.
<![endif]>ENGLISH
9
Loading...