LG 32CL20UA Users manual

Order Number : GETEC-C1-09-106 FCC Class B Certification
Test Report Number : GETEC-E3-09-051 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: LCD TV/Monitor

FCC ID.: BEJ32CL20UA

Please read this manual carefully before operating
your set and retain it for future reference.

The model and serial number of the TV is located
on the back and one side of the TV.

Record it below should you ever need service.

Model:

Serial:

LCD TV
OWNER’S MANUAL

19LH20
22LH20
26LH20
32LH20
37LH20
42LH20

32LH30
37LH30
42LH30
47LH30

32LF11
37LF11
42LF11
47LF11

19LU55
22LU55
26LU55

32CL20

47LF21

P/NO : SAC33601901 (0904-REV03)

www.lgusa.com / www.lg.ca

This product qualifies for ENERGY STAR in the “factory
default (Home Use)” setting.

Changing the factory default settings or enabling other fea­tures may increase power consumption that could exceed the
limits necessary to quality for ENERGY STAR.

1-800-243-0000 USA, Consumer User
1-888-865-3026 USA, Commercial User
1-888-542-2623 CANADA

LG Customer Information Center

2

WARNING / CAUTION

The lightning flash with arrowhead
symbol, within an equilateral triangle, is

intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral

triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the litera­ture accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) This device may not cause (harmful) interference,
and (2) this device must accept any interference
received, including interference that may cause unde­sired operation (of the device).

Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product.

3

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.

Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

Only use attachments/accessories specified by
the manufacturer.

Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus com­bination to avoid injury from tip-over.

Unplug this apparatus during lighting storms
or when unused for long periods of time.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power­supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.

1

2

3

4

5

7

8

6

9

10

4

SAFETY INSTRUCTIONS

Never touch this apparatus or antenna during
a thunder or lighting storm.

When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.

Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.

CAUTION concerning the Power Cord:
It is recommend that appliances be placed

upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.

Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.

Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.

Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.

WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product
near flammable objects such as gasoline or
candles or expose the TV to direct air
conditioning.

Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).

GGRROOUU NNDDIINNGG

Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC out­let). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.

Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.

DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS

Mains plug is the disconnecting device. The
plug must remain readily operable.

As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.

12

11

14

13

16

17

18

19

Power
Supply

Short-circuit

Breaker

15

5

AANNTTEENNNNAA SS
OOuuttddoo oorr aanntteennnnaa gg rroouunn ddiinngg

If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of over­head power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur.

Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.

Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna dis­charge unit, connection to grounding elec­trodes and requirements for the grounding
electrode.

AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee
NNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700

CC ll eeaann iinn gg

When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.

MMoovv iinngg

Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.

VVeennttiillaatt iioonn

Install your TV where there is proper ventila­tion. Do not install in a confined space such as
a bookcase. Do not cover the product with
cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty
places.

If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the power
cord contact an authorized service center.

Do not press strongly upon the panel with
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.

Keep the product away from direct sunlight.

FFoorr LL CCDD TT VV

If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.

Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary dis­tortion effects on the screen.

20

23

24

25

26

27

21

22

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Ground Clamps

Power Service Grounding
Electrode System (NEC
Art 250, Part H)

Ground Clamp

Electric Service

Equipment

NEC: National Electrical Code

ON DISPOSAL

(Only Hg lamp used LCD TV)

The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out in
accordance to the regulations of your local authority.

8

FEATURE OF THIS TV

The AV Mode optimizes the picture into Cinema,
Sports, and game Mode according to the video and
audio content. The viewer has the ability to quickly
choose the correct mode for the picture they are
viewing.

Automatically enhances and amplifies the sound of
human voice frequency range to help keep dialogue
audible when background noise swells.

LG TV include a unique invisible speaker system,
tuned by renowned audio expert, Mr. Mark Levinson.
Speakers are embedded in strategic spots behind the
front cabinet and use minute vibrations to turn the
entire front bezel into the speaker system. The result
is a clean, polished look, and enhanced audio by
increasing the “sweet spot”, giving a wider and richer
sound field.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

This TV contains the detailed calibrations necessary
for professional certification by the Imaging Science
Foundation. The resulting ISF “day” and “night” modes
will then be accessible by the user to experience the
best their LG HDTV has to offer.
CALIBRATE LIKE A PRO: Sophisticated and detailed
calibrations can be made through the ISFccc mode.
Detailed calibration requires a licensed technician.
Please contact your local dealer to inquire about an
ISF certified technician.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

■

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV

for an extended period, it can become permanently imprinted on the screen. This phenomenon is known
as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.

■

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period

(2 or more hours for LCD, 1 or more hours for Plasma).

■

Image burn can also occur on the letterboxed

areas of your TV if you use the 4:3 aspect ratio
setting for an extended period.

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN
/ BURN-IN” ON YOUR TV SCREEN

PREPARATION

9

ACCESSORIES

PREPARATION

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.

The accessories included may differ from the images below.

1.5V 1.5V

Owner’s Manual Power Cord

Remote Control,

Batteries

L

I
S
T

3

56

78

0

9

FLASHBK

M

U

T
E

V

O

L

CH

P

A

G

E

T
U

R
N

ENTER

FA

V

M
A

R
K

Q

.
M
E

N
U

M
E

N

U

L

I
S
T

123

456

78

0

9

FLASHBK

M
U

T
E

V

O

L

C
H

P
A
G

E

R

E
T

U
R

N

I
N
F

O

ENTER

I
N

P
U

T

P

O

W

E
R

A
V

M

O
D

E

E
N
E

R
G

Y
S

A
V
I

N
G

CD Manual

FFoorr 1199//2222LLHH2200

Cable Management Clip

(Refer to P.26)

Protection Cover

(Refer to P.17)

FFoorr 3322//3377//4422//4477LLFF1111,, 4477LLFF2211,, 3322CCLL2200

Bolts for stand assembly

(Refer to P.20)

Screw for stand fixing

(Refer to P.29)

Protection Cover

(Refer to P.21)

FFoorr 1199//2222//2266LLUU5555

Bolts for stand assembly

(Refer to P.22)

Cable Holder

(Refer to P.25)

OOnnllyy 2266//3322//3377//4422LLHH2200,, 3322//3377//4422//4477LLHH3300

Bolts for stand assembly

(Refer to P.18)

Screw for stand fixing

(Refer to P.29)

Screw for stand fixing

(Refer to P.29)

Protection Cover

(Refer to P.19)

x 4

x 3

OOppttiioonn EExxttrraass

* Wipe spots on the exterior only with

the polishing cloth.

* Do not wipe roughly when removing

stain. Excessive pressure may cause
scratch or discoloration.

Polishing Cloth

Not included with all models

D-sub 15 pin Cable

When using the VGA (D-sub 15 pin
cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain
standards compliance.

(For 26LU55)(For 26LU55)

x 2

(For 19/22LU55)

(Except 47LH30)

(Except 47LF11, 47LF21)(Except 47LF11, 47LF21)

x 4 x 4

or

PREPARATION

13

BACK PANEL INFORMATION

RS-232C IN

(

CONTROL&SERVICE)

AUDIO IN
(RGB/DVI)

ANTENNA
/CABLE IN

VIDEO

AUDIO

L R

RGB(PC) IN

/DVI IN

AV IN

VIDEO AUDIO

L(MONO)

R

COMPONENT IN

USB IN

SERVICE ONLY

21 43

2

1

3

26/32/37/42LH20, 19/22LU55, 32CL20

19/22LH20

4

5

7 68

7 68

9

❖N❖N

❖❋❋❖❋❋

9

■

Image shown may differ from your TV.

USB IN

SERVICE ONLY

AV IN

VIDEO AUDIO

VIDEO

COMPONENT IN

L(MONO)

L R

AUDIO

R

2

1

/DVI IN

RGB IN (PC)

AUDIO IN
(RGB/DVI)

RS-232C IN

(

CONTROL&SERVICE)

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

PREPARATION

15

USB IN SERVICE ONLY

Used for software updates.

AV (Audio/Video) IN

Analog composite connection. Supports standard
definition video only (480i).

HDMI/DVI IN, HDMI IN

Digital Connection.
Supports HD video and Digital audio. Doesn’t

support 480i.
Accepts DVI video using an adapter or HDMI to

DVI cable (not included).

RGB IN (PC)

Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).

AUDIO IN (RGB/DVI)

1/8" (0.32 cm) headphone jack for analog PC
audio input.

OPTICAL DIGITAL AUDIO OUT
(Except 19/22LH20)

Digital optical audio output for use with amps and
home theater systems.

Note: In standby mode, this port doesn’t work.

ANTENNA/CABLE IN

Connect over-the air signals to this jack.
Connect cable signals to this jack.

RS-232C IN (CONTROL & SERVICE) PORT

Used by third party devices.
This port is used for Service or Hotel mode.

COMPONENT IN

Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video & red

and white for audio.

Power Cord Socket

For operation with AC power.
Caution: Never attempt to operate the TV on DC

power.

1

2

3

4

5

9

8

7

6

PREPARATION

20

STAND INSTRUCTIONS (For 32/37/42/47LF11, 47LF21, 32CL20)

PREPARATION

If your TV has a protection tape attached,
remove the tape.

And carefully place the TV screen side down
on a cushioned surface to protect the screen
from damage.

Assemble the parts of the

SSTTAA NNDD BBOODDYY

with

CCOOVV EE RR BBAA SSEE

of the TV by using the 4

screws supplied.

Assemble the TV as shown.

1

2

3

Fix the 4 bolts securely using the holes in the
back of the TV.

4

INSTALLATION (

For 32/37/42LF11, 32CL20)

GG

When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the product
installation). Do not over tighten.

NOTE

!

■

Image shown may differ from your TV.

CCOOVV EE RR BBAA SSEE

SSTTAA NNDD BB OO DDYY

PREPARATION

24

VESA WALL MOUNTING

PREPARATION

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest installer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.

GG

Do not install your wall mount kit while your TV is turned on. It may result in personal
injury due to electric shock.

CAUTION

GG

Screw length needed depends on the wall mount
used. For further information, refer to the instruc­tions included with the mount.

GG

Standard dimensions for wall mount kits are shown
in the table.

GG

When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.

GG

Do not use screws longer then the standard dimen­sion, as they may cause damage to the inside to
the TV.

GG

For wall mounts that do not comply with the VESA

standard screw specifications, the length of the
screws may differ depending on their specifica­tions.

GG

Do not use screws that do not comply with the
VESA standard screw specifications.

Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.

GG

LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installa­tion instructions.

NOTE

!

Model

VESA (A *B)

Standard Screw Quantity

Wall Mounting Bracket

(sold separately)

19LU55,
22LU55,
19LH20,

22LH20,

37LH20, 37LH30,

37LF11,

42LH20, 42LH30,

42LF11, 47LF11,

47LF21, 47LH30

26LH20, 26LU55

32LH20, 32LH30,

32LF11,

32CL20

10 0* 10 0 M 4 4

200* 10 0 M 4 4

200* 200 M6 4

AA

BB

RW230 AW-47LG30M

AW-47LG30M

RW120

RW230

PREPARATION

25

CABLE MANAGEMENT

For 19/22/26LU55

For 32/37/42/47LF11, 47LF21, 32CL20

After connecting the cables as necessary,
install CABLE HOLDER as shown and bundle
the cables.

1

■

Image shown may differ from your TV.

Connect the cables as necessary.
To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT CLIP as shown.

1

2

Fit the CABLE MANAGEMENT CLIP as shown.

3

CABLE MANAGEMENT CLIP

PREPARATION

31

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wa ll
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

Cable TV
Wall Jack

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wire
when connecting the antenna.

Copper Wire

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

ANTENNA/

CABLE IN

■

To prevent damage do not connect to the power outlet until all connections are made between the devices.

■

Image shown may differ from your TV.

ANTENNA/

CABLE IN

EXTERNAL EQUIPMENT SETUP

32

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if
you do receive digital signals from a digital set-top box or other digital external device.

Component Connection

1. How to connect

Connect the video outputs (Y, P

B

, PR

)

of the digital set-

top box to the

CC OOMMPP OONN EE NNTT II NN VVIIDDEEOO

jacks on

the TV. Match the jack colors (Y = green, P

B

= blue, and

P

R = red).

Connect the audio output of the digital set-top box to
the

CC OOMMPP OONN EE NNTT II NN AA UUDD II OO

jacks on the TV.

2

1

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box operation.

)

■

Select the

CC oommppoo nn eenntt

input source on the TV using the

II NNPP UUTT

button on the remote control.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

This part of EXTERNAL EQUIPMENT SETUP mainly use picture for

2266//33 22//3377 //4422LLHH2200

.

USB IN

SERVICE ONLY

VIDEO AUDIO

L(MONO)

R

2

AV IN

Y L RPB PR

/DVI IN

1

VIDEO

AUDIO

COMPONENT IN

L R

1

2

Y, C

B/

PB

, C

R/P

R

Supported Resolutions

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

15.73 59.94

15.73 60.00

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

Signal

480i

480p

720p

10 8 0 i

10 8 0 p

Component

Yes

Yes

Yes

Yes

Yes

HDMI

No

Yes

Yes

Yes

Yes

EXTERNAL EQUIPMENT SETUP

33

HDMI Connection

Connect the digital set-top box to the

HHDD MM II //DDVVII

II NN

or

HHDDMM II// DDVVII IINN 11 //22*// 33

* jack on the TV.

No separate audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select the

HHDDMMIIorHHDDMMII11//22*//33

* input source on the TV

using the

IINNPPUUTT

button on the remote control.

2

1

RS-232C IN

(

CONTROL&SERVICE)

AUDIO IN

(RGB/DVI)

A

C

DEO

AUDIO

RGB IN (PC)

VIDEO AUDIO

L(MONO)

R

AV IN

L R

OPT

A

2

1

/DVI IN

HDMI OUTPUT

1

HDMI-DTV

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

1920x1080p

* HDMI 2: Except 19/22LH20
* HDMI 3: Except 19/22/26/32/37/42LH20, 19/22LU55,

32CL20

GG

Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version 1.3, it can
cause flickers or no screen display. In this case use the lat­est cables that support HDMI version 1.3.

NOTE

!

EXTERNAL EQUIPMENT SETUP

34

EXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

RS-232C IN

(

CONTROL&SERVICE)

ANTENNA/

CABLE IN

AUDIO

RGB IN (PC)

L(MONO)

R

AV IN

NT IN

L R

AUDIO IN
(RGB/DVI)

OPTICAL DIGITA

AUDIO OUT

L R

DVI OUTPUT

AUDIO

2

1

/DVI IN

1

2

GG

A DVI to HDMI cable or adapter is required for this con­nection. DVI doesn't support audio, so a separate audio
connection is necessary.

NOTE

!

Connect the DVI output of the digital set-top box to
the

HHDDMM II //DDVVII II NN

or

HHDDMM II// DDVVII II NN 11//22

* jack on

the TV.

Connect the digital set-top box audio output to the
AAUU DDIIOO IINN ((RRGG BB //DDVVII))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select the

HHDDMMIIorHHDDMMII11//22

* input source on the TV

using the

IINNPPUUTT

button on the remote control.

2

1

* HDMI 2: Except 19/22LH20