LG 29FU6TS Owner's Manual

Color Television

OWNER'S MANUAL

Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

Safety Precautions

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS CAUTION : TO RED UC E TH E RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR

Cleaning

Unplug this television receiver from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the television receiver manufacturer as they may cause hazards.

Power Supply

This television receiver should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your television dealer or local power company.

DISCONNECTING DEVICE FROM MAINS

- Mains plug is the disconnecting device. The plug must remain readily operable.

Installation

Do not use this television receiver near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Do not place this television receiver on an unstable cart, stand, or table. The television receiver may fall, causing serious injury to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer, or sold with the television receiver. Wall or shelf mounting should follow the manufacturer's instructions and should use a mounting kit approved by the manufacturer. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of the television receiver, and to

PRODUCT TO RAIN OR MOISTURE. BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the television receiver on a bed, sofa, rug, or other similar surface. This television receiver should not be placed in a builtin installation such as a bookcase unless proper ventilation is provided. It is recommended not to operate this unit near speakers or big metallic furnitures in order to keep their magnetism from disturbing colors purity (uniformity) on the screen.

Wet Location Marking:

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Use

Do not allow anything to rest on the power cord. Do not locate this television receiver where the cord will be abused by persons walking on it. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Never push objects of any kind into this television receiver through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television receiver.

Service

Do not attempt to service this television yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified personnel.

Writing Model And Serial Numbers

The serial number and model number are found on the back of this unit. The serial number is unique to this unit. You should record requested information here and retain this guide as a permanent record of your purchase. Please retain your purchase receipt as your proof of purchase.

Date of Purchase Dealer Purchased from Dealer Address Dealer Phone No. Model No. Serial No.

CONTENTS

Description of controls............................3

On screen menus.....................................4

Basic TV operation ..................................5

Various function ......................................6

Picture control .........................................7

Sound control ..........................................7

USB Mode.................................................8

Closed caption function........................12

PIP function (some models)..................13

Connection of external equipment

(some models)........................................14

Troubleshooting check list....................16

Description of controls

SLEEP

MUTE

TV/VIDEO

POWER

123 4

ENTER

FCR

MTS

A.PROG

MEMORY/ERASE

CAPTION

VOL

USB

U S B

SELECT

VOL.+

VOL.-

ZOOM

/ESC

1. POWER BUTTON (or ON/OFF )

Refer to "Turning on/off the TV".

2. SLEEP BUTTON

To set the desired sleep time.

3. A. PRGO (Auto program) BUTTON

To memorize channels by AUTO PROGRAM.

4. MTS BUTTON (some models)

To listen to the MTS sound.

5. NUMBER BUTTONS

To select the desired channel directly.

USB SELECT BUTTONS

To operate USB function.

6. MUTE BUTTON

7. CH UP/DOWN (

To mute the sound. Again to restore the muted sound.

• To select the desired channel.

• To select the desired menu item when menu is displayed on the screen.

VOLUME UP/DOWN (F/G) BUTTONS

• To increase or decrease volume level.

• To enter or adjust the selected menu when

menu is displayed on the screen.

ENTER (

• To exit from the displayed menu.

• To memorize the adjusted menu.

• To recall the current TV mode (by remote

/E) BUTTONS

) BUTTON

control only).

8. MENU BUTTON

To display on-screen or exit from USB mode.

* Other local key is not available in USB mode.

3 4

9. TV/VIDEO BUTTON

To select TV, VIDEO or COMPONENT mode.

10.MEMORY/ERASE BUTTON (some models)

To memorize or erase the desired channel.

11.CAPTION BUTTON (some models)

To select the CAPTION mode. Refer to "Closed caption function".

12.FCR (Favorite Channel Review) BUTTON

To select the favorite channel. Refer to "Favorite channel memory".

13.USB BUTTON

Enter into or exit from USB mode.

14. : No function.

15.STAND BY INDICATOR

Illuminates red when the TV is in standby mode. Refer to "Turning on/off the TV".

16.REMOTE CONTROL SENSOR

Fitting Batteries in the Remote Control Unit

The remote control is powered by batteries. This requires AAA type batteries for operation. To ensure consistent operation, change the batteries about once a year. Caution : Batteries installed incorrectly may leak and damage the remote control. Do not mix old and new batteries or different types of batteries (for example, standard and alkaline).

1.Remove the battery compartment cover by sliding it in the arrowhead direction.

2. Insert new batteries as indicated by the polarity markings (+ and -) inside the compartment.

3. Replace the battery compartment cover.

On screen menus

The dialogue between you and your set takes place on screen with an operator menu .The buttons required for the operating steps are also displayed.

Menu selection

1.Press the MENU button and then D/Ebutton to display each menu.

2.Press the

Channel

CH.

Auto+program { Manual program { Favorite+channel++ { Auto+demo+ ++++ {

Move++Next+{+Exit}

Picture

APC +

CH.

XD { Contrast { Brightness + { Color ++++++++{ Sharpness + { Tint

Move++Next+{+Back}

Sound

CH.

DASP + Turbo +Sound { AVL { Balance {

button and then D/Ebutton to

++++++

+ {

select a menu item.

3.Press the

button to display the sub menu or

the pull-down menu.

4.Change the setting of an item in the sub or pulldown menu with the higher level menu with ENTER (

or D/E.You can move to

F/G

) or

button and to move to the lower level menu

press the

CH.

button.

Manual

program

Channel { Memory { Fine { Ch.+name {

Move++Next+{+Back}

Channel

Auto+program { Manual program {

Favorite+channel+

Favorite+channel+{

Auto+demo+ + {

Move++Next+{+Back}

{

CATV++95 _____ _____ _____ _____ _____ _____ _____

Move++Next+{+Back}

Timer

CH.

Clock { Off_timer { On+_timer { Auto+_off+ {

Move++Next+{+Back}

Special

Language {

CH.

Input { Key+lock { Caption+ { Degauss { Game {

Move++Next+{+Exit}

Basic TV operation

Before operating your TV, make sure the following instructions have been completed.

• Your TV has been connected to an antenna or a cable system.

• Your TV has been plugged in a power outlet.

• In this manual, the OSD (On Screen Display)

may be different from your TV’s because it is just an example to help you with the TV operation.

Turning on/off the TV

Press the POWER (or ON/OFF) button on the set. At this time, the set switches to standby mode and the standby indicator lights up in red. To switch the TV on from standby mode, press the TV/VIDEO, CH the set or POWER, TV/VIDEO, CH number button on the remote control. A channel number will be displayed on the screen. The on-screen display will disappear after a few seconds. Press the POWER button on the remote control. It reverts to standby mode. To switch the TV off, press the POWER button on the set.

/E button on

/Eor

Selecting the on screen language

1. Press the MENU button and then D/Ebutton

until the menu is displayed as shown right.

2. Press the

Language.

3. Press the

select the desired language. From this point on, the on-screen display will be presented in the language of your choice.

4. Press the MENU button to exit.

and then D/Ebutton to select

and then use D/E button to

Memorizing Channels

This is the function to memorize all the active channels in your area before you can use the TV. There are two ways of memorizing channels. You can use either. One is called AUTO PROGRAM and the other is called MANUAL PROGRAM. In AUTO PROGRAM the TV will memorize the channels in ascending order. If there are additional channels you want to add or delete, you can manually add or delete those channels.

Memorizing the Channels by AUTO PROGRAM

AUTO PROGRAM searches and memorizes all

the active channels in your area then you can select the desired channel with the

Using the A.PROG button

You can conveniently perform AUTO PROGRAM using the A.PROG button on the remote control.

1. Press the A.PROG button.

2. Press the

PROGRAM starts now.

If you want to stop auto programming, press the

ENTER (

Only the channels searched up to that time are memorized.

Notes :

or A.PROG button.The AUTO

) button.

/Ebuttons.

• If the programmed signal has poor quality, memorize again in the

• AUTO PROGRAM stores all receivable channels regardless of receiving signal (RF, Cable).

• If channels of general wireless TV and cable TV are duplicated, press the number buttons (0 ~ 9) to change as .

Channels of general

wireless TV

Auto program.

Channels of

Cable TV

Using the MENU button

1. Press the MENU button and then use D/ button to select the channel menu.

2. Press the

Auto program.

3. Press the mode.

4. The AUTO PROGRAM starts now.

and then D/Ebutton to select

button to enter the Auto program

Memorizing the Channels by MANUAL PROGRAM

Using the MEMORY/ERASE button

You can conveniently perform MANUAL PROGRAM using the MEMORY / ERASE button on the remote control.

1. Press the the channel number you want to memorize or erase.

2. Press the MEMORY/ERASE button to select

Memory or Erase.

The on screen display appears as shown right.

/Eor NUMBER buttons to select

Selecting the Channel

Press the D/Ebutton to conveniently select the upper or lower channel then the channel being viewed, or NUMBER buttons to directly select the desired channel.

Adjusting the Volume

Press theGbutton to increase the volume level or

button to decrease the volume level.

To mute the sound, Press the MUTE button. It's convenient when you get the telephone calls. To restore the muted sound, press the MUTE button again or VOL

F/G

button.

+ 11 hidden pages