LG 29FU3RSD Owner’s Manual

Colour Television

OWNER’S MANUAL

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this infor-

mation to your dealer when you require service.

Model number :

Serial number :

P/NO : MFL39073959 -EN (CW62C)

Installation

Contents

Installation.........................................................2

Connection of external equipment..................2

Location and function of controls...................3

Basic operation.................................................4

On screen menus..............................................5

Setting up TV stations......................................5

Picture adjustment............................................6

Time setting.......................................................6

Sound adjustment.............................................6

USB mode..........................................................7

PIP operation (option).....................................11

Troubleshooting check list.............................11

Teletext (option)..............................................12

Connection of external equipment

You can connect additional equipment, such as

VCRs, camcorders etc. to your set.What is shown

here may

be somewhat different from your set.

Aerial socket

1. Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on a desired pro-

gramme number using the ‘Manual pro-

gramme tuning’ section.

4. Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR

to audio/video in sockets of the set and in sock-

ets of the VCR to RF OUT sockets of the set.

2. If the VCR is connected to the AV sockets on

the set, press the TV/AV button to select AV 1 ,

AV 2 or AV 3 .

3. Press the PLAY button on the VCR.

The VCR playback picture appears on the screen.

You can also record programmes received by the

TV on video tape via audio/video out sockets.

Note : If you have a mono VCR, connect the

audio cable from the VCR to the AUDIO L/MONO

socket of the set.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to

the Euro scart socket of the set.

2. Press the PLAY button on the VCR.

If your VCR outputs a switching voltage when

connected to Euro scart socket, the set will

switch to AV 1 mode automatically. But if you

want to keep on watching TV mode, press the

or NUMBER buttons.

Otherwise press the TV/AV button on the

remote control handset to select AV 1 The

VCR playback picture appears on the screen.

You can also record programmes received by the

TV on video tape.

Note : Signal type RGB, i.e. the signals red, green

and blue can only be selected for the Euro scart

socket. These signals are transmitted, for exam-

ple, by a pay TV decoder, game machine or photo

CD unit, etc.

Component in sockets (option)

1. Connect the COMPONENT video output

sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the

COMPONENT (480i) to the COMPONENT

INPUT sockets (Y PB PR) on the set.

2. Connect the audio cable from the COMPO-

NENT to AUDIO IN sockets of AV IN2.

3. Press the TV/AV button to select COMPONENT.

4. Press the PLAY button on the COMPONENT.

The COMPONENT playback picture appears

on the screen.

Power

This set operates on an AC mains supply, the volt-

age is as indicated on the label on the back cover.

Never apply DC power to the set. In the event of

thunderstorms or powercuts, please pull out the

aerial and mains plugs.

Press the POWER button on the front panel or side

panel to turn off the TV when the TV set is not being

used for a long time.It is recommended to remove the

plug from the wall outlet(Power point).

Disconnecting device from mains

Mains plug is the disconnecting device. The plug

must remain readily operable

Warning

To prevent fire or shock hazard, do not expose the set

to rain or moisture.

Do not place anything containing liquid on top of the set,

this may cause a fire or could give an electric shock.

Service

Never remove the back cover of the set as this can

expose you to very high voltage and other hazards. If

the set does not operate properly, unplug it and call

your dealer.

Aerial

Connect the aerial cable to the socket on the back

cover. For the best reception an outdoor aerial

should be used.

Location

Position your set so that no bright light or sunlight

falls directly onto the screen. Care should be

taken not to expose the set to any unnecessary

vibration, moisture, dust or heat. Also ensure that

the set is placed in a position to allow a free flow

of air. Do not cover the ventilation openings on the

back cover.

Note:

To remove dirt or fingerprint on the surface of your

TV, please rub with a line-free cloth supplied in

the accessory.Do not pose too much pressure in

cleaning so as to prevent any risk of damage to

the product.

Remote control handset

Before you use the remote control handset,

please install the batteries. See the next page.

1. POWER

switches the set on from standby or off to standby.

2. NUMBER BUTTONS

Switches the set on from standby or directly select a number.

USB SELECT BUTTONS

Oprate USB function.

3. MENU

To display on-screen or exit from USB mode .

Other local key is not available in USB mode.

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

scans programmes automatically.

(Volume Up/Down)

adjusts the volume.

adjusts menu settings.

accepts your selection or displays the current mode.

5. TELETEXT BUTTONS (option)

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

SLEEP

sets the sleep timer.

7. PIP BUTTONS (option)

PIP

switches the sub picture on or off.

PR +/-

selects a programme for the sub picture.

SWAP

alternates between main and sub picture.

INPUT

selects the input mode for the sub picture.

SIZE

adjusts the sub picture size.

STILL

freezes motion of the sub picture.

POSITION

relocates the sub picture in clockwise direction.

8. FAVOURITE

selects a favorite programme.

EYE/

(option)

switches the eye function on or off.

10. MUTE

switches the sound on or off.

11. TV/AV

selects TV or AV mode.

switches the set on from standby.

exits the Teletext mode.

12.

I/II/

elects the language during dual language broad-

cast.

selects the sound output (option).

13. Q.VIEW (or YELLOW)

returns to the previously viewed programme.

14.

LIST (or BLUE)

displays the programme table.

15. USB BUTTON

Select the USB mode.

COLOURED BUTTONS : These buttons are

used for teletext (only TELETEXT models) or pro-

gramme edit.

Front panel

MAIN POWER (ON/OFF)

switches the set on or off.

POWER/STANDBY INDICATOR

illuminates brightly when the set is in standby

mode.dims when the set is switched on.

REMOTE CONTROL SENSOR

Note : Only use the supplied remote control

handset. (When you use others, they will not

be able to function.)

selects a menu.

accepts your selection or displays the current

mode.

(Volume Down/Up)

adjusts the volume.

adjusts menu settings.

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

AUDIO/VIDEO/USB IN SOCKETS (AV

IN2)(option)

Connect the audio/video/USB out sockets of

external equipment to these sockets.

Note :What is shown here may be somewhat

different from your set or can not be supplied on

your area.

Battery installation

The remote control handset is powered by AAA

type batteries. Install batteries as indicated by the

polarity symbols ( and ) marked inside the

compartment.

Note : To avoid damage from possible battery

leakage, remove the batteries if you do not plan to

use the remote control handset for an extended

period of time

Location and function of controls

Basic operation

On and off

1. Press the main power button to switch the set on.

2. If the set is in standby mode, press the

POWER,

, TV/AV or NUMBER buttons on

the remote control handset to switch it on fully.

3. Press the POWER button on the remote con-

trol handset.

The set reverts to standby mode.

4. Press the main power button again to switch

the set off.

Note : If, while the set is switched on, the mains

plug is disconnected the set will switch to standby

or power on when the mains plug is replaced in

the mains power socket.

Mute function

Press the MUTE button. The sound is switched off

and the display

appears.

You can cancel it by pressing the MUTE,

I/II/

(option), button.

On screen language selection

The menu can be displayed on the screen in

desired language. First select your language.

1. Press the MENU button and then

but-

ton to select the Special menu.

2. Press the

button to select Language.

3. Press the

button and then

button to

select your desired language.

All the on screen displays will appear in the

selected language.Press the OK or

button

to select the Special menu.

4. Repeatedly press the MENU button to return

to normal TV viewing.

TV and AV modes

AV mode is used when a video cassette recorder

(VCR), or other equipment is connected to the set.

Note : When a VCR is connected via the aerial

socket the set is used in TV mode. See the

‘Connection of external equipment’ section.

AV1 : VCR connected to the Euro scart socket

or AV IN 1 sockets on the set

AV2 : VCR connected to the AV IN 2 sockets

on the set.

COMPONENT : DVD Player connected to the

COMPONENT sockets on the set (option)

Alternatively you can select the TV or AV mode by

pressing the TV/AV button.

In AV mode, to return to TV mode, press the

or NUMBER buttons.

Auto AV switching (option)

If your VCR outputs switching voltage when it is

switched to playback with the VCR connected to the

Euro scart socket. The set is automatically switched

AV1 mode when an AV signal is input. But if you

want to keep on watching TV mode, press the

or NUMBER buttons. Press the TV/AV button to

return to AV modes.

Child lock

The TV can be set so that the remote control hand-

set is needed to control it. This feature can be used

to prevent unauthorized viewing.

With the lock on, the display

Child lock on

appears on the screen if any button on the front

panel is pressed while viewing the TV.

Blue back (option)

If you select On on the Blue back pull-down

menu, the blue background appears on the screen

when there is no or poor signal.

Tilt (option)

The TV picture may tilt to the left or right if the TV

set moves to another position. This function can

be used to compensate the tilt.

Degaussing (option)

Due to the super large Tube in the set. The colour

purity of the picture may be affected by other mag-

netic influences such as speakers. Stripes may

appear on the screen or there may be colour

patches.

Note : If you cannot adjust the screen condition by

degaussing, try it again after about 4 minutes.

Sleep timer

You don’t have to remember to switch the set off

before you go to sleep. The sleep timer automati-

cally switches the set to standby after the preset

time elapses.

Repeatedly press the SLEEP button to select the

number of minutes. The display

- - - will appear

on the screen, followed by 10, 20, 30, 60, 90, 120,

180 and 240. The timer begins to count down from

the number of minutes selected.

Note :

a. To view the remaining sleep time, press the

SLEEP button once.

b. To cancel the sleep time, repeatedly press the

SLEEP button until the display

- - -

appears.

c. When you switch the set off, the set releases

the preset sleep time.

+ 8 hidden pages