LG 24MT49VW-WZ, 22MT49DF-PZ, 29MT49VF-PZ, 22MT49VF-PZ, 24MT49VF-PZ User Guide

...
OWNER’S MANUAL
Safety and Reference
LED TV* *Disclaimer LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
MT49*
www.lg.com
Table of contents
Licenses -------------------------------------------3
ENGLISH
ENG
Open source software notice information --------------------------------------3
Preparing -----------------------------------------3
Lifting and moving the TV -------------------4
Setting up the TV -------------------------------4
Using the joystick button --------------------4
Mounting on a table ---------------------------5
Mounting on a wall ----------------------------6
Connections (notications) -----------------7
Remote control ---------------------------------8
Settings ----------------------------------------- 10
To see web manual --------------------------- 15
Maintenance ----------------------------------- 16
Troubleshooting------------------------------16
Specications --------------------------------- 17
2

Licenses

A
A
<
<
Supported licenses may dier by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This DivX Certied® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, rst register your device at
vod.divx.com
your device setup menu. DivX Certied® to play DivX® video up to HD 1080p, including
premium content. DivX®, DivX Certied® and associated logos are trademarks of DivX,
LLC and are used under license. Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and
others available at [www.divx.com/patents]
. Find your registration code in the DivX VOD section of

Open source software notice information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This oer is valid for three (3) years from the date on which you purchased the product.

Preparing

NOTE
y Image shown may dier from your TV. y Your TV’s OSD (On Screen Display) may dier slightly from that
shown in this manual.
y The available menus and options may dier from the input
source or product model that you are using.
y New features may be added to this TV in the future. y The TV can be placed in standby mode in order to reduce the
power consumption. And the TV should be turned o if it will not be watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be signicantly reduced
if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
y The items supplied with your product may vary depending on
the model.
y Product specications or contents of this manual may be
changed without prior notice due to upgrade of product functions.
y For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not t into your TV’s USB port.
B
y Use a certied cable with the HDMI logo attached. If you do
not use a certied HDMI cable, the screen may not display or a connection error may occur.
y Recommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
CAUTION
y Do not use any unapproved items to ensure the safety and
product life span.
y Any damage or injuries caused by using unapproved items are
not covered by the warranty.
y Some models have a thin lm attached on to the screen and this
must not be removed.
B
*A
10 mm
18 mm
*B
ENGENGLISH
3

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its
ENGLISH
type and size.
ENG
y It is recommended to move the TV in the box or packing material
that the TV originally came in.
y Before moving or lifting the TV, disconnect the power cord and
all cables.
y When holding the TV, the screen should face away from you to
avoid damage.
y Hold the top and bottom of the TV frame rmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
y When transporting the TV, do not expose the TV to jolts or
excessive vibration.
y When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
y Do not apply excessive pressure to cause exing/bending of
frame chassis as it may damage screen.
CAUTION
y Avoid touching the screen at all times, as this may result in
damage to the screen.
y When handling the TV, be careful not to damage the protruding
joystick button. (Depending on model)

Setting up the TV

CAUTION
y When attaching the stand to the TV set, place the screen facing
down on a cushioned table or at surface to protect the screen from scratches.
y Do not carry the TV upside-down by holding the stand body (or
stand base) as this may cause it to fall o, resulting in damage or injury.
y Do not apply foreign substances (oils, lubricants, etc.) to the
screw parts when assembling the product. (Doing so may damage the product.)
NOTE
y Lift up the latch at the bottom of the stand base and detach the
stand base from the TV. (Only MT49*F, MT49*W, MT49U)
y Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse. (Only MT49*T)

Using the joystick button

You can simply operate the TV functions, pressing or moving the button.
Joystick button
Basic functions
Power On (Press) Power O (Press and hold)
Volume Control
1
Programmes Control
1 If the menu button is on the screen, pressing and holding the
button will let you exit the menu.
4
Adjusting the menu
When the TV is turned on, press the joystick button one time. You can adjust the menu items pressing or moving the buttons.
Turns the power o.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the setting menu.
NOTE
y If you press the joystick button rst, you may not be able to adjust
the volume level and saved programmes.
CAUTION
y When your nger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button.
Using the kensington security system
(This is not available for all models.)
y Image shown may dier from your TV.
The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.
ENGENGLISH

Mounting on a table

y Image shown may dier from your TV.
1 Lift and tilt the TV into its upright position on a table.
- Leave a 100 mm (minimum) space from the wall for proper
ventilation.
100 mm
100 mm
100 mm
2 Connect the AC-DC Adapter and power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of heat, as this may result
in re or other damage.
y Please be sure to connect the TV to the AC/DC power adapter
before connecting the TV’s power plug to a wall power outlet.
100 mm
NOTE
y The Kensington security system is optional. You can obtain
additional accessories from most electronics stores.
5

Mounting on a wall

For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation
ENGLISH
ENG
and Setup Guide.
100 mm
100 mm
100 mm
If you intend to mount the TV to a wall, attach Wall mounting interface (optional parts) to the back of the TV.
When you install the TV using the wall mounting interface (optional parts), attach it carefully so it will not drop.
1 If you use screw longer than standard, the TV might be
damaged internally.
2 If you use improper screw, the product might be damaged and
drop from mounted position. In this case, LG Electronics is not responsible for it.
Separate purchase (Wall mounting bracket)
Model 22/24MT49* 28/29MT49* Wall mount (A x B) (mm)
A
B
Standard screw M4 x L10
Number of screws 4 Wall mount bracket
(optional)
75 x 75 100 x 100
RW120
100 mm
CAUTION
y Disconnect the power rst, and then move or install the TV.
Otherwise electric shock may occur.
y If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury.
y Use an authorized LG wall mount and contact the local dealer or
qualied personnel.
y Do not over tighten the screws as this may cause damage to the
TV and void your warranty.
y Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are not covered by the warranty.
y Screw length from outer surface of back cover should be under
8 mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max.8 mm
NOTE
y Use the screws that are listed on the VESA standard screw
specications.
y The wall mount kit includes an installation manual and necessary
parts.
y The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
y The length of screws may dier depending on the wall mount. Be
sure to use the proper length.
y For more information, refer to the instructions supplied with the
wall mount.
6
Connections (notications)
Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
NOTE
y The external device connection may dier from the model. y Connect external devices to the TV regardless of the order of the
TV port.
y If you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.
y Refer to the external equipment’s manual for operating
instructions.
y If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
y In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the Picture menu until the picture is clear.
y In PC mode, some resolution settings may not work properly
depending on the graphics card.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
y Use a signal splitter to use more than 2 TVs. y If the image quality is poor, install a signal amplier properly to
improve the image quality.
y If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
y An antenna cable and converter are not supplied. y Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
Satellite dish connection
(Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).
ENGENGLISH
CI module connection
(Depending on model) View the encrypted (pay) services in digital TV mode.
y Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
y If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service Operator.
Other connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.
y USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
NOTE
y Supported HDMI Audio format :
Dolby Digital / Dolby Digital Plus (32 KHz, 44.1 KHz, 48 KHz), PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz, 192 KHz) (Depending on model)
7
Loading...
+ 14 hidden pages