LG 22MN430M-B User Manual
OWNER'S MANUAL
LED LCD Monitor
(LED Monitor*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating your set and
retain it for future reference.
LED LCD MONITOR MODEL
22MN430M
24ML44B
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
2
ENGLISH
CONTENTS
LICENSE ---------------------------- 3
ASSEMBLING AND PREPARING - 4
- Supported Drivers and Software -------------- 4
- Component and Button Description ---------- 5
How to Use the Joystick Button
- Moving and Lifting the Monitor --------------- 6
Mounting on a table
Mounting on a wall
USING THE MONITOR SET ------ 10
- Connecting to a PC ---------------------------10
D-SUB connection
HDMI connection
- Connecting to AV Devices --------------------11
HDMI connection
- Connecting Peripherals -----------------------11
Connecting Headphones
CUSTOMIZING SETTINGS ------ 12
TROUBLESHOOTING ------------ 17
SPECIFICATIONS ---------------- 18
- Preset Modes (Resolution) -------------------20
LICENSE
3
ENGLISH
ENG
Each model has different licenses. Visit
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
www.lg.com
for more information on the license.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENGLISH
ENG
ASSEMBLING AND PREPARING
CAUTION
Always use genuine components to ensure safety and product performance.
y
The product warranty will not cover damage or injury caused by the use of counterfeit components.
y
It is recommend that use the supplied components.
y
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
y
Illustrations in this document represent typical procedures, so they may look different from the actual product.
y
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
y
so may damage the product.)
Applying excessive force when tightening screws may cause damage to the monitor.
y
Damage caused in this way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
y
and could result in personal injury.
When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
y
may cause damage to it.
For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in
y
raw material. With no peeled-off appearance, it has good durability. Please use it with confidence because there
is no problem in using the product at all.
NOTE
Note that the components may look different from those shown here.
y
Without prior notice, all information and specifications in this manual are subject to change to improve the
y
performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store
y
where you purchased the product.
The power cord provided may differ depending upon the region.
y
Supported Drivers and Software
You can download and install the latest version from the LGE website (
Drivers and Software Installation Priority
Monitor Driver Recommended
OnScreen Control Recommended
www.lg.com
).
Component and Button Description
5
ENGLISH
ENG
Joystick Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
Basic Functions
Press the joystick button once with your finger to turn on the
monitor.
Press and hold the joystick button once with your finger to turn off the
monitor.
You can control the volume by moving the joystick button left/right.
(for HDMI only)
◄/►
Power on
Power off
Volume
Control
NOTE
The joystick button is located at the bottom of the monitor.
y
6
ENGLISH
ENG
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regardless of its shape or size.
It is advisable to place the monitor in the original box
y
or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the
y
power cord and all cables.
Hold the top and bottom of the monitor frame firmly.
y
Do not hold the panel itself.
CAUTION
As far as possible, avoid touching the monitor screen.
y
This may result in damage to the screen or some of
the pixels used to create images.
If you use the monitor panel without the stand
y
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
When holding the monitor, the screen should face
y
away from you to prevent it being scratched.
When moving the monitor, avoid any strong shock or
y
vibrations to the product.
When moving the monitor, keep it upright, never turn
y
the monitor on its side or tilt it sideways.
Mounting on a table
Lift and tilt the Monitor set into its upright posi-
y
tion on a table.
Leave a 100 mm (minimum) space from the wall for
proper ventilation.
100 mm
100 mm
100 mm
100 mm
7
ENGLISH
ENG
CAUTION
Unplug the power cord prior to moving or
y
installing the monitor. There is risk of electric
shock.
Make sure to use the power cord that is provided
y
in the product package and connect it to a
grounded power outlet.
If you need another power cord, please contact
y
your local dealer or the nearest retail store.
Loading...