LG 24ML44B, 22MN430M User Manual

OWNER’S MANUAL

*Disclaimer: LG LED Monitor applies LCD screen with LED backlights.This product is a computer monitor and not for television purpose.
Please read this manual carefully before operating your set and retain it for future reference.
LED LCD MONITOR MODEL
22MN430M 24ML44B
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
2
ENGLISH

CONTENTS

LICENSE ---------------------------- 3
ASSEMBLING AND PREPARING - 4
USING THE MONITOR SET ------ 10
- Supported Drivers and Software -------------- 4
- Component and Button Description ---------- 5
How to Use the Joystick Button
- Moving and Lifting the Monitor --------------- 6
Mounting on a table
Mounting on a wall
- Connecting to a PC ---------------------------10
D-SUB connection
HDMI connection
- Connecting Peripherals ----------------------- 11
Connecting Headphones
CUSTOMIZING SETTINGS ------ 12
TROUBLESHOOTING ------------ 17
SPECIFICATIONS ---------------- 18
- Preset Modes (Resolution) ------------------- 20
3

LICENSE

Each model has different licenses. Visit
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
www.lg.com
for more information on the license.
ENGLISH
ENG
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive: * This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display. * To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENGLISH
ENG

ASSEMBLING AND PREPARING

CAUTION
Always use genuine components to ensure safety and product performance.
y
The product warranty will not cover damage or injury caused by the use of counterfeit components.
y
It is recommend that use the supplied components.
y
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
y
Illustrations in this document represent typical procedures, so they may look different from the actual product.
y
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so
y
may damage the product.) Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way
y
will not be covered by the product warranty. Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
y
and could result in personal injury. When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
y
may cause damage to it. For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in
y
raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because there is
no problem in using the product at all.
NOTE
Note that the components may look different from those shown here.
y
Without prior notice, all information and specifications in this manual are subject to change to improve the perfor-
y
mance of the product. To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where
y
you purchased the product. The power cord provided may differ depending upon the region.
y

Supported Drivers and Software

You can download and install the latest version from the LGE website (
Drivers and Software Installation Priority
Monitor Driver Recommended
OnScreen Control Recommended
www.lg.com
).

Component and Button Description

5
ENGLISH
ENG
Joystick Button

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
Basic Functions
Press the joystick button once with your finger to turn on the monitor.
Press and hold the joystick button once with your finger to turn off the monitor.
You can control the volume by moving the joystick button left/right. (for HDMI only)
/
Power on
Power off
Volume
Control
NOTE
The joystick button is located at the bottom of the monitor.
y
6
ENGLISH
ENG

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these in­structions to prevent the monitor from being scratched or damaged and to ensure safe transportation regard­less of its shape or size.
It is advisable to place the monitor in the original
y
box or packing material before attempting to move it. Before moving or lifting the monitor, disconnect
y
the power cord and all cables. Hold the top and bottom of the monitor frame
y
firmly. Do not hold the panel itself.
CAUTION
As far as possible, avoid touching the monitor
y
screen. This may result in damage to the screen or some of the pixels used to create images.
If you use the monitor panel without the stand
y
base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
When holding the monitor, the screen should face
y
away from you to prevent it being scratched.
When moving the monitor, avoid any strong shock
y
or vibrations to the product. When moving the monitor, keep it upright, never
y
turn the monitor on its side or tilt it sideways.

Mounting on a table

Lift and tilt the Monitor set into its upright posi-
y
tion on a table. Leave a 100 mm (minimum) space from the wall for
proper ventilation.
100 mm
100 mm
100 mm
100 mm
7
ENGLISH
ENG
CAUTION
Unplug the power cord prior to moving or
y
installing the monitor. There is risk of electric shock. Make sure to use the power cord that is provided
y
in the product package and connect it to a grounded power outlet. If you need another power cord, please contact
y
your local dealer or the nearest retail store.
Loading...
+ 14 hidden pages