LG 22LN549M Owner’s Manual
ENGLISH
OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV and retain
it for future reference.
22LN549M
28LN549M
22LN548M
28LN548M
www.lg.com
TABLE OF CONTENTS
2
ENGLISH
TABLE OF CONTENTS
3 LICENSES
4 INSTALLATION PROCEDURE
5 ASSEMBLING AND PREPARING
5 Unpacking
9 Parts and buttons
13 Lifting and moving the TV
14 Setting up the TV
14 - Attaching the Stand
17 - Mounting on a table
18 - Tidying cables
18 - Using the Kensington security system
19 - Detaching the Stand
21 - Mounting on a wall
23 WATCHING TV
39 CUSTOMIZING SETTINGS
39 Accessing main menus
40 USING THE USER GUIDE
40 Accessing User Guide menu.
40 - Using the TV menu
40 - Using the Remote Control
41 MAINTENANCE
41 Cleaning Your TV
41 Screen and frame
41 Cabinet and stand
41 Power cord
42 Preventing “Image burn” or “Burn-in” on
your TV screen
43 TROUBLESHOOTING
23 Turning the TV on for the first time
25 MAKING CONNECTIONS
25 Connecting an antenna
26 Satellite connection
27 Connecting to a HD receiver, DVD, VCR
player or Gaming device
27 - HDMI connection
28 - HDMI to DVI connection
29 - Component connection
30 - Composite connection
31 - Euro Scart connection
32 Connecting to a USB
32 Connecting to a CI Module
33 Connecting to a PC
34 - HDMI connection
35 - HDMI to DVI connection
36 - RGB connection
37 REMOTE CONTROL
43 General
44 SPECIFICATIONS
49 KEY CODES
50 EXTERNAL CONTROL DEVICE
SETUP
51 RS-232C with RS-232C Cable (Legacy)
51 - Customer Computer
51 - RS-232C configurations
52 Communication Parameters
52 Command reference list
53 Transmission / Receiving Protocol
LICENSES
3
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
ENGLISH
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
INSTALLATION PROCEDURE
4
ENGLISH
INSTALLATION PROCEDURE
1
2
3
Open the package and make sure all the accessories are included.
Attach the stand to the TV.
Connect an external device to the TV.
NOTE
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product model that you are
using.
New features may be added to this TV in the future.
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and accessories.
NOTE
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to
upgrade of product functions.
CAUTION
Do not use any pirated items to ensure the safety and product life span.
Any damages or injuries by using pirated items are not covered by the warranty.
NOTE
The items supplied with your product may vary depending on the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
ENGLISH
B
A
B
*A 10 mm
*B
A
18 mm
6
ENGLISH
ASSEMBLING AND PREPARING
22LN549M 22LN548M
Remote control.
Batteries (AAA).
(See p.37, See p.38)
Stand Body.
(See p.14, See p. 19)
CD (Owner's Manual).
Cards.
Cable Tie.
(See p.18)
Stand Base.
(See p.14, See p. 19)
or
Power Cord.
( Depending on the country )
(See p.17)
or
Isolator
(Depending on the country)
AC-DC Adapter.
(See p.17)
AC-DC Adapter.
( Depending on the country )
(See p.17)
28LN549M 28LN548M
ASSEMBLING AND PREPARING
7
ENGLISH
Remote control.
Batteries (AAA).
(See p.37, See p.38)
Power Cord.
( Depending on the country )
(See p.17)
CD (Owner's Manual).
Cards.
AC-DC Adapter.
(See p.17)
Stand Base.
(See p.16, See p. 20)
or
AC-DC Adapter.
( Depending on the country )
(See p.17)
Cable Tie.
(See p.18)
or
Isolator
(Depending on the country)
ASSEMBLING AND PREPARING
8
ENGLISH
NOTE
Antenna Isolator Installation Guide
-Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
-You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-Before starting, be sure that the TV antenna is connected.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to
a cable distribution system has therefore to be provided through a device providing electrical isolation
below a certain frequency range (galvanic isolator, see EN 60728-11)”
1. Connect to TV.
2. Connect to Set-Top box.
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
Parts and buttons
22LN549M 22LN548M
ASSEMBLING AND PREPARING
Remote Control Sensor
Standby Light
Lighting On :
When Power is turned off
Lighting Off :
When Power is turned on
9
ENGLISH
Touch Buttons
Touch button Description
Scrolls through the saved programmes.
Adjusts the volume level.
OK Selects the highlighted menu option or confirms an input.
SETTINGS Accesses the main menus, or saves your input and exits the menus.
INPUT Changes the input source.
/ I
Turns the power on or off.
NOTE
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
10
ENGLISH
ASSEMBLING AND PREPARING
28LN549M 28LN548M
Remote Control Sensor
Standby Light
Lighting On :
When Power is turned off
Lighting Off :
When Power is turned on
OK
SETTINGS
INPUT
Touch Buttons
Touch buttons Description
Scrolls through the saved programmes.
Adjusts the volume level.
OK Selects the highlighted menu option or confirms an input.
SETTINGS Accesses the main menus, or saves your input and exits the menus.
INPUT Changes the input source.
/ I
Turns the power on or off.
NOTE
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING
or
(Depending on the
model)
11
ENGLISH
22LN549M
22LN548M
Connection panel (See p.25)
RS-232C IN
(CONTROL & SERVICE)
12
ENGLISH
ASSEMBLING AND PREPARING
or
(Depending on the
model)
28LN549M
28LN548M
Connection panel (See p.25)
RS-232C IN
(CONTROL & SERVICE)
Lifting and moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.
CAUTION
Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.
It is recommended to move the TV in the
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
the power cord and all cables.
Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
When holding the TV, the screen should face
away from you to prevent the screen from
scratches.
When transporting the TV, do not expose the
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
upright, never turn the TV on its side, or tilt
towards the left or right.
13
ENGLISH
14
Setting up the TV
ENGLISH
Attaching the Stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
1
ASSEMBLING AND PREPARING
22LN549M 22LN548M
Place the TV with the screen side down on a
flat and cushioned surface.
Attach the Stand Base from the Stand Body by
3
turning the screw to the right with a Coin.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
When attaching the stand to the TV,
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Attach the Stand Body from the TV.
2
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING
15
CAUTION
Do not carry the monitor upside-down
as this may cause it to fall off its stand,
resulting in damage or injury.
The illustration shows a general example
of installation and may look different from
the actual product.
ENGLISH
Do not carry the monitor upside-down by
holding the stand body as this may cause
it to fall off, resulting in damage or injury.
The illustration shows a general example
of installation and may look different from
the actual product.
ASSEMBLING AND PREPARING
16
ENGLISH
28LN549M 28LN548M
1
Stand Base
CAUTION
Do not carry the monitor upside-down
as this may cause it to fall off its stand,
resulting in damage or injury.
The illustration shows a general example
of installation and may look different from
the actual product.
2
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
When attaching the stand to the TV,
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Mounting on a table
Lift and tilt the TV into its upright position on a
1
table.
Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
ASSEMBLING AND PREPARING
Connect the AC-DC Adapter and Power Cord
2
to a wall outlet.
17
ENGLISH
10 cm
10 cm
WARNING
22LN549M 22LN548M
When you adjust the angle, do not hold the
buttom of the TV frame as shown on the follow
ing illustration, as may injure your fingers.
or
CAUTION
Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may
occur.
CAUTION
Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING
18
ENGLISH
NOTE
22LN549M 22LN548M
Tilt from +20 to -5 degrees up or down to
adjust the angle of the TV to suit your view.
+20-5
Front Rear
Using the Kensington security system
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit
http://www.kensington.com
Connect the Kensington security system cable
between the TV and a table.
.
Tidying cables
Gather and bind the cables with the supplied
cable tie.
NOTE
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
Loading...