OWNER’S MANUAL
LED TV
*LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
LN41**
LN405*
P/NO : MFL67782403 (1302-REV00) |
www.lg.com |
Printed in Korea |
|
<![endif]>ENGLISH
2TABLE OF CONTENTS
TABLE OF CONTENTS
3SAFETY INSTRUCTIONS
8INSTALLATION PROCEDURE
8ASSEMBLING AND PREPARING
8Unpacking
11Parts and buttons
12Lifting and moving the TV
13Setting up the TV
13- Attaching the Stand Base
13- Detaching the Stand Base
14Mounting on a table
15Mounting on a wall
16Tidying cables
17MAKING CONNECTIONS
17Antenna connection
18Adapter connection
18HDMI connection
19Component connection
19Composite connection
20Audio System connection
20- External Stereo Connection
20USB connection
21REMOTE CONTROL
22WATCHING TV
22Turning the TV on for the first time
22Watching TV
22Managing programmes
22- Automatically setting up programme
23- Manually setting up programme
24- Editing your programme list
24- Selecting a programme on the programme list
24Using additional options
24- Adjusting aspect ratio
25- Using the input list
26ENTERTAINMENT
26Connecting USB storage devices
27Browsing files
28Viewing photos
29Listening to music
30Viewing movies
32 DivX® VOD Guide
33 CUSTOMIZING TV SETTING
33Accessing main menus
33Customizing Settings
33- SETUP Settings
34- PICTURE Settings
36- AUDIO Settings
37- TIME Settings
38- OPTION Settings
38- LOCK Settings
39 TELETEXT
39 Switch On/Off
39 Simple Text
39 - Page selection
39- Programming a colour button in LIST mode
39 |
Fastext |
39 |
- Page selection |
39Special Teletext Function
40MAINTENANCE
40 Cleaning your TV
40 - Screen, frame, cabinet and stand
40 - Power cord
40TROUBLESHOOTING
41SPECIFICATIONS
45 LICENSES
WARNING
yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
yy If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yy The note helps you understand and use the product safely. Please read the note carefully before using the product.
SAFETY INSTRUCTIONS |
3 |
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and/ or remote control in the following environments: --A location exposed to
direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
yyDo not place the product where it might be exposed to dust.
This may cause a fire hazard.
yyMains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.
yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
yyMake sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
yyInsert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.
yyEnsure the power cord does not come into contact with hot objects such as a heater.
This may cause a fire or an electric shock hazard.
yyDo not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
yyBend antenna cable between inside and outside building to prevent rain from flowing in.
This may cause water damaged inside the Product and could give an electric shock.
yyWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock / fire hazard.
yyDo not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
yyDo not drop the product or let it fall over when
connecting external devices.
Otherwise, this may result in injury or damage to the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
4SAFETY INSTRUCTIONS
yyKeep the anti-moisture packing material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital.
Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yyDo not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yyDispose of used batteries carefully to ensure that a small child does not consume them.
Please seek DoctorMedical
Attention immediately if child consumes batteries.
yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/
screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted. (Depending on model)
yyDo not put or store inflammable substances near the product. There is a danger of combustion/ explosion or fire due to careless handling of the inflammable substances.
yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
yyDo not spray water on the product or scrub with an inflammable substance
(thinner or benzene). Fire or electric shock accident can occur.
yyDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
You may be injured or the product can be damaged.
yyNever touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
yyDo not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.
yyIf any of the following occur, unplug the product immediately and contact your local service centre.
--The product has been impacted by shock --The product has been
damaged
--Foreign objects have entered the product --The product produced
smoke or a strange smell
This may result in fire or electric shock.
|
SAFETY INSTRUCTIONS |
5 |
yyUnplug the TV from AC |
yyWhen installing the antenna, |
|
mains wall socket if you do |
consult with a qualified |
|
not intend to use the TV |
service technician. If not |
|
for a long period of time. |
installed by a qualified |
|
Accumulated dust can cause |
technician, this may create |
|
fire hazard and insulation |
a fire hazard or an electric |
|
deterioration can cause |
shock hazard. |
|
electric leakage/shock/fire. |
yyWe recommend that you |
|
|
|
|
yyApparatus shall not be |
maintain a distance of |
|
exposed to dripping or |
at least 2 to 7 times the |
|
splashing and no objects |
diagonal screen size when |
|
filled with liquids, such as |
watching TV. |
|
vases, shall be placed on |
If you watch TV for a long |
|
the apparatus. |
period of time, this may |
|
|
cause blurred vision. |
|
|
yyOnly use the specified type |
|
|
of battery. |
|
CAUTION |
This could cause damage to |
|
the remote control. |
|
|
yyInstall the product where no |
yyDo not mix new batteries |
|
radio wave occurs. |
|
|
with old batteries. |
|
|
|
|
|
|
This may cause the batteries |
|
yyThere should be enough |
to overheat and leak. |
|
yyBatteries should not be exposed to excessive |
|
|
distance between an outside |
|
|
heat. For example, keep away from direct |
|
|
antenna and power lines |
|
|
Sunlight , open fireplace and electric heaters. |
|
|
to keep the former from |
|
|
yyDo not place non-rechargeable batteries in |
|
|
touching the latter even |
|
|
charging device. |
|
|
when the antenna falls. |
|
|
yyMake sure there are no |
|
|
This may cause an electric |
|
|
shock. |
objects between the remote |
|
yyDo not install the product |
control and its sensor. |
|
|
|
|
on places such as unstable |
|
|
shelves or inclined surfaces. |
yySignal from Remote Control |
|
Also avoid places where |
can be interrupted due to |
|
there is vibration or where |
external/internal lighting eg |
|
the product cannot be fully |
Sunlight, fluorescent lighting. |
|
supported. |
If this occurs turn off lighting |
|
Otherwise, the product may |
or darken viewing area. |
|
fall or flip over, which may |
yyWhen connecting external |
|
cause injury or damage to |
|
|
devices such as video game |
|
|
the product. |
|
|
consoles, make sure the |
|
|
yyIf you install the TV on a |
|
|
connecting cables are long |
|
|
stand, you need to take |
enough. |
|
actions to prevent the |
Otherwise, the product |
|
product from overturning. |
may fall over, which may |
|
Otherwise, the product may |
cause injury or damage the |
|
fall over, which may cause |
product. |
|
injury. |
yyDo not turn the product |
|
yyIf you intend to mount the product to a wall, |
|
|
On/Off by plugging-in or |
|
|
attach VESA standard mounting interface |
unplugging the power plug to |
|
(optional parts) to the back of the product. When |
the wall outlet. (Do not use |
|
you install the set to use the wall mounting |
the power plug for switch.) |
|
bracket (optional parts), fix it carefully so as not |
It may cause mechanical |
|
to drop. |
failure or could give an |
|
yyOnly use the attachments / accessories |
electric shock. |
|
specified by the manufacturer. |
|
|
<![endif]>ENGLISH
<![endif]>ENGLISH
6SAFETY INSTRUCTIONS
yyPlease follow the installation |
yyAvoid touching the screen or |
|
instructions below to |
holding your finger(s) against |
|
prevent the product from |
it for long periods of time. |
|
overheating. |
Doing so may produce some |
|
--The distance between the |
temporary or permanent |
|
product and the wall should |
distortion/damage to screen. |
|
be more than 10 cm. |
yyWhen cleaning the product |
|
--Do not install the product in |
||
and its components, unplug |
||
a place with no ventilation |
||
the power first and wipe it |
||
(e.g., on a bookshelf or in |
||
with a soft cloth. Applying |
||
a cupboard). |
||
excessive force may cause |
||
--Do not install the product |
||
scratches or discolouration. |
||
on a carpet or cushion. |
||
Do not spray with water or |
||
--Make sure the air vent is |
||
wipe with a wet cloth. Never |
||
not blocked by a tablecloth |
||
use glass cleaner, car or |
||
or curtain. |
||
industrial shiner, abrasives |
||
Otherwise, this may result in |
||
or wax, benzene, alcohol |
||
fire. |
||
etc., which can damage the |
||
yyTake care not to touch the |
product and its panel. |
|
ventilation openings when |
Otherwise, this may result in |
|
watching the TV for long |
fire, electric shock or product |
|
periods as the ventilation |
damage (deformation, |
|
openings may become hot. |
corrosion or breakage). |
|
This does not affect the |
yyAs long as this unit is connected to the AC wall |
|
operation or performance of |
outlet, it is not disconnected from the AC power |
|
the product. |
source even if you turn off this unit by SWITCH. |
|
yyPeriodically examine the cord of your appliance, |
yyWhen unplugging the cable, |
|
and if its appearance indicates damage or |
grab the plug and unplug it, |
|
deterioration, unplug it, discontinue use of the |
by pulling at the plug. Don’t |
|
appliance, and have the cord replaced with |
pull at the cord to unplug the |
|
an exact replacement part by an authorized |
power cord from the power |
|
servicer. |
board, as this could be |
|
yyPrevent dust collecting on |
hazardous. |
|
the power plug pins or outlet. |
yyWhen moving the product, |
|
This may cause a fire |
make sure you turn the |
|
hazard. |
power off first. Then, unplug |
|
yyProtect the power cord from |
the power cables, antenna |
|
cables and all connecting |
||
physical or mechanical |
||
cables. |
||
abuse, such as being |
||
The TV set or power cord |
||
twisted, kinked, pinched, |
||
may be damaged, which |
||
closed in a door, or walked |
||
may create a fire hazard or |
||
upon. Pay particular |
||
cause electric shock. |
||
attention to plugs, wall |
||
yyWhen moving or unpacking |
||
outlets, and the point where |
||
the cord exits the appliance. |
the product, work in pairs |
|
yyDo not press strongly upon |
because the product is |
|
heavy. |
||
the panel with a hand or |
||
Otherwise, this may result in |
||
sharp object such as nail, |
||
injury. |
||
pencil or pen, or make a |
||
|
||
scratch on it, as it may |
|
|
cause damage to screen. |
|
SAFETY INSTRUCTIONS |
7 |
yyContact the service centre once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.
yyRefer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/ or brightly coloured dots
(red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/ top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.
The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for
Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount
of current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
8INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2Attach the stand to the TV set.
3Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
|
B |
B |
|
|
< |
10 mm |
|
|
|
||
|
|
*A = |
|
|
|
< |
18 mm |
A |
|
*B = |
|
|
A |
|
ASSEMBLING AND PREPARING |
9 |
<![endif]>ENGLISH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control and |
|
Owner’s manual |
Cable Tie |
Stand Base |
|||||||||
batteries (AAA) |
|
|
|
(Depending on model) |
(See p.13) |
||||||||
(See p.21) |
|
|
|
(See p.16) |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
or |
|
|
or |
|
Power Cord |
AC-DC Adapter |
AC-DC Adapter |
Isolator |
(Depending on model) |
(Depending on model) |
(Depending on model) |
(Depending on model) |
(See p.18) |
(See p.18) |
(See p.18) |
(See p.10) |
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
NOTE
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall |
|
ANTENNA/ |
or |
|
Cable / Antenna |
Isolator |
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING |
11 |
Parts and buttons
Screen
Remote control Sensor
Speakers
|
|
OK |
SETTINGS INPUT |
|
|
|
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Touch buttons1 |
|||
|
|
|
|
|
|
|
Touch Buttons |
|
Description |
||||
|
|
|
|
|
|
|
|
|
Scrolls through the saved programmes. |
||||
|
|
|
|
|
|
|
|
|
Adjusts the volume level. |
|
|
|
|
|
|
|
|
|
|
|
OK |
Selects the highlighted menu option or confirms an input. |
|||||
|
|
|
|
|
|
|
SETTINGS |
Accesses the main menu, or saves your input and exits the menus. |
|||||
|
|
|
|
|
|
|
INPUT |
Changes the input source. |
|
|
|
|
|
|
|
|
|
|
|
|
/ I |
Turns the power on or off. |
|
|
|
|
|
|
|
|
|
|
|
|
1All of the buttons are touch sensitive and can be operated through simple touch with your finger.
<![endif]>ENGLISH
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
yy When transporting a large TV, there should be at least 2 people.
yy When transporting the TV by hand, hold the TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy It is recommended to move the TV in the box or packing material that the TV originally came in.
yy Before moving or lifting the TV, disconnect the power cord and all cables.
yy When holding the TV, the screen should face away from you to avoid damage.
yy When transporting the TV, do not expose the TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
yy Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.
yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING |
13 |
Setting up the TV
Image shown may differ from your TV.
Attaching the Stand Base
1
Stand Base
2
Detaching the Stand Base
1
Stand Base
NOTE
yy When Detaching the stand from TV, Detach the stand with lifting up the lever in the direction of the arrow.
2
<![endif]>ENGLISH
CAUTION
yy Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
CAUTION
yy Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
yy When Detaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
14 ASSEMBLING AND PREPARING
<![if ! IE]> <![endif]>ENGLISH |
Mounting on a table |
|
1 Lift and tilt the TV into its upright position on a table. |
||
|
||
|
- - Leave a 10 cm (minimum) space from the wall |
|
|
for proper ventilation. |
|
10 cm |
|
|
cm |
|
10 cm |
10 |
|
10 cm |
||
|
2Connect the AC-DC Adapter and Power Cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.
Securing the TV to a wall
(This feature is not available for all models.)
1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts position, remove the bolts first.
2Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eyebolts on the rear of the TV.
3Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
CAUTION
yy Make sure that children do not climb on or hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.
WARNING
yy If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
»» Using cabinets or stands recommended by the manufacturer of the television.
»» Only using furniture that can safely support the television.
»» Ensuring the television is not overhanging the edge of the supporting furniture.
»» Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
»» Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
»» Educating children about the dangers of climbing on furniture to reach the television or its controls.