LG 19CNV42K Cloud V Series, 20CAV37K, 24CAV37K Owner's Manual

www.lg.com

OWNER'S MANUAL

LG CLOUD V SERIES MONITOR
(LED MONITOR)

19CNV42K

Please read the safety information carefully before using the product.

LG Cloud V Series Monitor (LED Monitor) Model

English

2

ENG

English

Table of Contents

TABLE OF CONTENTS

3 ASSEMBLING AND

PREPARING

3 Unpacking

4 Parts and buttons

5 Lifting and moving the Monitor

5 Setting Up the Monitor set

5 - Attaching the Stand Base

6 - Mounting on a table

6 - Adjusting the angle

7 - Adjusting the stand height

7 - Using the Kensington locking device

8 - Detaching the stand base

8 - Detaching the stand body

9 - Swivel stand

9 - Using the Pivot function

10 - Installing the wall mount plate

10 - Mounting on a wall

12 USING THE MONITOR SET

12 Connecting Input Signal Cable

12 - D-SUB IN connection - PC

13 - DVI connection

14 Connecting LAN/Peripherals

14 - LAN connection

15 - Peripheral device connection

16 - Self Image Adjustment

17 CUSTOMIZING SETTINGS

18 Customizing Settings

18 - Menu Settings

19 - PICTURE

20 - COLOR

21 - DISPLAY

22 - OTHERS

23 - VOLUME

24 TROUBLESHOOTING

26 PRODUCT SPECIFICATION

27 Preset Mode

27 Power Indicator

28 PROPER POSTURE

28 Proper posture for using the monitor

29 USING CLOUD SOLUTION

3

ENG

English

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.

y

Only use an approved LG power adapter.

y

Damage caused by other power adapters is not covered by warranty.

y

Note that the components may look different from those shown here.

y

Without prior notice, all information and specifications in this manual are subject to change to improve
the performance of the product.

y

To purchase optional accessories, visit an electronics store or online shopping site or contact the retail
store where you purchased the product.

Power CordUser Manual/Card

Stand Base

Adaptor

CAUTION

NOTE

15-pin D-SUB Signal Cable

(This cable is not included in all

counties)

4

ENG

English

ASSEMBLING AND PREPARING

Parts and buttons

Power Indicator

y

LED On : Power is on

y

LED Off: Power is off

Front Side Buttons

Input Connectors (See p.12 to 15)

(Power Button)

Input Connectors
(See p.15 )

1

1

5

ENG

English

ASSEMBLING AND PREPARING

Setting Up the Monitor set

Attaching the Stand Base

1

Place the monitor's screen face down.

y

To protect the screen from scratches, cover
the surface with a soft cloth.

3

Using a coin, turn the screw clockwise to se-

cure the stand base.

2

Check the position (at the front and rear) of

the stand body, then mount the stand base on
the stand body as shown in the figure.

CAUTION

Stand Body

Stand Base

Stand Base

Lifting and moving the
Monitor

Please heed the following information when
moving the monitor.

y

Avoid touching the screen at all times, as this
may result in damage to the screen or pixels .

CAUTION

y

It is recommended to move the Monitor in
the box or packing material that the Monitor
originally came in.

y

Before moving or lifting the Monitor,
disconnect the power cord and all cables.

y

Hold the top and bottom of the Monitor frame
firmly. Make sure not to hold the transparent
part area.

y

When holding the Monitor, the screen should
face away from you to prevent the screen
from scratches.

y

When transporting the Monitor, do not
expose the Monitor to jolts or excessive
vibration.

y

When transporting the Monitor, keep the
Monitor upright, never turn the Monitor on its
side, or tilt towards the left or right.

6

ENG

English

ASSEMBLING AND PREPARING

Adjusting the angle

1

Place the monitor mounted on the stand base

in an upright position.

2

Adjust the angle of the screen. The angle of

the screen can be adjusted up to 5° forwards
and 15° backwards for a comfortable viewing
experience.

y

To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.

y

Be careful not to touch or press the screen
area when adjusting the angle of the monitor.

WARNING

Mounting on a table

1

Lift the monitor and place it on the table in an

upright position.

Install at least 10 cm away from the wall to
ensure sufficient ventilation.

2

Connect the adaptor to the monitor, then plug

the power cord into the wall outlet.

3

Press the (Power) button on the front of the

monitor to turn on the monitor.

10 cm

10 cm

10 cm

10 cm

y

Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.

CAUTION

Front SideRear Side

7

ENG

English

ASSEMBLING AND PREPARING

Using the Kensington locking
device

The connector for the Kensington lock is located
on the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.

Connect the monitor to the table with the Kensing-

ton lock cable.

y

Using the Kensington lock is optional. The
accessories can be purchased at your local
electronics store.

NOTE

y

Once the pin is removed, it is not necessary
to re-insert it to adjust the height.

Adjusting the stand height

1

Place the monitor mounted on the stand base

in an upright position.

2

Remove the tape attached at the bottom rear

of the stand body, then pull out the locking
pin.

3

The height can be adjusted up to 130 mm.

y

Do not put your finger be­tween the screen and the
base (chassis) when adjust­ing the screen's height.

Tape

Locking Pin

Stand Body

CAUTION

WARNING

130.0mm

8

ENG

English

ASSEMBLING AND PREPARING

Detaching the stand body

1

Place the monitor's screen face down. To

protect the screen from scratches, cover the
surface with a soft cloth.

2

Using a screwdriver, remove the four screws

and detach the stand from the monitor.

y

The components appearing in the illustra­tions may look different from the actual prod­uct.

y

Do not carry the monitor upside-down as this
may cause it to fall off its stand, resulting in
damage or injury.

y

To avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec­essary pressure on the screen.

y

Only remove the tape and the locking pin
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.

Detaching the stand base

1

Place the monitor's screen face down.

To protect the screen from scratches, cover the
surface with a soft cloth.

2

Using a coin, turn the screw in the stand base

counterclockwise. Detach the stand base from
the stand body.

CAUTION

Stand Body

Stand Base

9

ENG

English

ASSEMBLING AND PREPARING

Swivel stand

y

Image shown may differ from your Monitor
set.

1

Swivel 90 degrees and adjust the angle of the

Monitor set to suit your view.

1

Lift the monitor to its highest height to utilize

the Pivot function.

Using the Pivot function

The pivot function allows you to rotate the screen
90 degrees clockwise.

2

Landscape & Portrait : You can rotate the panel

90° clockwise. Please be cautious and avoid
contact between the monitor head and the
Stand Base when rotating the screen to access
the Pivot function. If the monitor head touches
the Stand Base, then the Stand Base could
crack.

Head
section

Stand
section

3

Be careful with the cables when rotating the

screen.

10

ENG

English

ASSEMBLING AND PREPARING

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.

1

Please, Use the screw and wall mount interface

in accordance with VESA Standards.

2

If you use screw longer than standard, the

monitor might be damaged internally.

3

If you use improper screw, the product might be

damaged and drop from mounted position. In
this case, LG Electronics is not responsible for
it.

4

VESA compatible.

5

Please use VESA standard as below.

y

784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm

* Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

y

787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad

and screws.

Mounting on a wall

Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. De­tailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.

Installing the wall mount plate

This monitor has a VESA compatible mount on the
back. Most mounts will require an LG mounting
plate.

1

Place the monitor's screen face down. To

protect the screen from scratches, cover the
surface with a soft cloth.

2

Place the wall mount plate on the monitor and

align it with the screw holes on the monitor.

3

Using a screwdriver, tighten the four screws to

fix the plate onto the monitor.

y

The wall mount plate is sold separately.

y

For more information on the installation, refer
to the wall mount plate's installation guide.

NOTE

Wall Mount Plate

11

ENG

English

ASSEMBLING AND PREPARING

y

Unplug the power cord before moving or in­stalling the monitor to avoid electric shocks.

y

Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling
off, which could lead to injury. Please use
a LG wall mounting bracket when using a
VESA mount. For more information, contact
your local retail store or a qualified installer.

y

Applying excessive force when fastening
screws may cause damage to the moni­tor. Damage caused in this way will not be
covered by the product warranty.

y

Use the wall mounting bracket and screws
that conform to the VESA standard. Dam­age caused by the use or misuse of inap­propriate components will not be covered
by the product warranty.

y

Use the screws specified in the VESA stan­dard.

y

The wall mount kit includes the installation
guide and necessary parts.

y

The wall mounting bracket is optional. The
accessories can be purchased at your local
retail store.

y

The length of the screw may differ for each
wall mounting bracket. Ensure the correct
length of the screw is used.

y

For more information, please refer to the user
manual for the wall mounting bracket.

Model

19CNV42K

VESA (A x B)

100 x 100

Stand Screw

M4

Required Screw

4

Wall Mount Plate
(Optional)

RW120

CAUTION

NOTE

12

ENG

English

USING THE MONITOR SET

USING THE MONITOR SET

Connecting Input Signal Cable

y

This monitor supports the *Plug and Play
feature.
*Plug and Play: A feature that allows you to

add a device to your computer, without having
to reconfigure anything or install any manual
drivers.

D-SUB IN connection - PC

D-SUB IN transfers analog video signals from the
PC to the monitor.
Connect the monitor to the PC using the provided
15-pin D-SUB signal cable as illustrated below.

NOTE

y

Apple Adapter

An adapter may be needed for Apple
computers. This adapter can be purchased
from Apple.

13

ENG

English

USING THE MONITOR SET

DVI connection

Transfers digital video signals from the Cloud Mon­itor to an extended monitor.
Connect the Cloud Monitor to an extended monitor
using a DVI cable.

y

To connect the monitor to a computer, use
the appropriate signal cable (LAN and D­SUB).

y

A converter can be used to convert the DVI-I
input signal to D-SUB input signal.

y

When connecting the power cord to the out­let, use a grounded (3-hole) multi-socket or a
grounded wall outlet.

y

The monitor may flicker when turned on in an
area of low temperature. This is normal.

y

Sometimes red, green or blue spots may ap­pear on the screen. This is normal.

y

Connect the input signal
cable and tighten in the
direction of the arrow. To
prevent disconnection
secure the cable tightly.

y

Do not press on the screen for a prolonged
time. This may cause image distortion.

y

Do not display a still image on the screen
for a prolonged time. This may cause image
retention. If possible, use the screen saver.

CAUTION

NOTE

14

ENG

English

USING THE MONITOR SET

Connecting LAN/Peripherals

LAN connection

Connect the router or switch to the monitor using a
LAN cable as illustrated below.

y

The LAN cable is sold separately.

y

The following LAN cable type can be used:
Standard: IEEE 802.3 ETHERNET

y

If a device is connected into the earphone
out port via a LAN cable, you can adjust the
volume with the volume icon on PC taskbar.

y

Connect the LAN cable and the peripheral
devices prior to booting up the PC.

NOTE

15

ENG

English

USING THE MONITOR SET

y

Peripheral devices are sold separately.

y

The USB ports on the left and bottom of the
monitor can be used to connect the key­board, mouse, and other USB devices.

y

Cables with angled plugs may have clear­ance issues, use straight plugs when pos­sible.

Angle Type Straight Type

Peripheral device connection

Connect peripheral devices to the monitor using
USB, microphone and headphone ports.

NOTE

NOTE

y

Headphones, speakers or microphone may
not work normally, depending on the server
PC settings.

y

Virtual solutions may affect the functions or
speed of the specific USB storage device.

Left

Bottom

1

1