Radio ....................................................................................................................................................76
DVD player/CD player ...............................................................................................................77
Operating an iPod.........................................................................................................................78
Automatic High Beam ......................................................................................................................46
Brake Hold .............................................................................................................................................42
Door Locks...........................................................................................................................................104
Driving Position Memory .................................................................................................................29
Dynamic Radar Cruise Control with Full-speed Range ..................................................52
Energy Monitor/Consumption Screen.....................................................................................15
EV Drive Mode ................................................................................................................................... 38
Floor Mat Installation......................................................................................................................... 12
Fog Lights................................................................................................................................................48
Front Air Conditioning System*
Control panel....................................................................................................................................81
Using the automatic mode........................................................................................................83
Adjusting the temperature........................................................................................................ 83
Front Seats .............................................................................................................................................22
Fuel Tank Cap......................................................................................................................................106
Garage Door Opener ......................................................................................................................95
*: This feature may be operated by Voice command (See P.91)
Par ki ng Br ake .........................................................................................................................................41
*: This feature may be operated by Voice command (See P.91)
LS600hL_QG_U
2
Por ta ble Au di o De vi ce Po rt s.........................................................................................................79
Power (Ignition) Switch ....................................................................................................................35
Power Rear Seat..................................................................................................................................24
Pow er Windo ws .................................................................................................................................105
Theft Deterrent System .................................................................................................................... 21
Tire Pressure Warning System ........................................................................................................61
Tr u n k ........................................................................................................................................................108
Command list ..................................................................................................................................92
Windshield Wipers and Washer...................................................................................................48
*: This feature may be operated by Voice command (See P.91)
3
LS600hL_QG_U
LS600hL_QG_U
4
Overview
P.48
P.43
P.45
P.48
P.104
P.108
P.107
P.29
P.105
P.105
P.104
P.61
P.106
P.32
Inside lock buttons
Trunk opener
Fuel filler door opener
Driving position memory
switches
Shoulder anchor control
switches
Window lock switch
Power window switches
Instrument Panel
Windshield wiper and washer switch
Multi-information display
Headlight switch
Fog light switch
Turn signal lever
See P.7
See P.8
*
Door lock switches
Hood lock release lever
Pre-collision braking off switch*
Tire pressure warning reset switch
5
LS600hL_QG_U
P.59
P.62
P.66
P.108
P.35
P.41
Odometer/trip meter and trip meter reset switches*
P.81
P.49
P.75
Lexus night view switch
Remote Touch screen
Navigation system
Clock*
Rear window and outside rear
view mirror defoggers
Air conditioning system
Trunk opener main switch
Audio system
Emergency flasher switch*
See P.9
Power switch
Parking brake switches
: If equipped
*: Refer to “Owner’s Manual”.
6
LS600hL_QG_U
Overview
P.44
P.74
P.74
P.50, 52
P.42
P.75
P.31
P.57
P.53
Instrument Panel
“DISP” button
Audio remote control
switches
Tilt and telescopic steering
control switch
Phone switches
Talk switch
LKA (Lane-Keeping Assist)
switch
Brake hold switch
7
LS600hL_QG_U
Cruise control switch
Vehicle-to-vehicle distance
button
P.46
P.85
P.55
P.56
Outside rear view mirror switches
P.33
Instrument panel light control switches*
Headlight cleaner
switch
*
Intuitive parking assist switch
BSM (Blind Spot Monitor) main
switch
Heated steering wheel switch
Automatic High Beam switch
: If equipped
*: Refer to “Owner’s Manual”.
8
LS600hL_QG_U
Overview
P.38
P.38
P.62
P.40
P.89
P.89
P.86
P.25
P.23
Instrument Panel
Snow mode switch*
1
EV drive mode switch
Shift lever
Driving mode select
switch
Rear sunshade switch*
Rear door sunshade switches
Front climate control seat switches
Rear seat return switch
Front passenger’s power seat switches
Vehicle height adjustment switch*
Remote Touch
2
2
*
2
*
2
*
2
*
1
9
LS600hL_QG_U
VSC (Vehicle Stability Control) OFF switch*
: If equipped
1
*
: Refer to “Owner’s Manual”.
2
*
: Location of the switches varies according to the vehicle grade level.
1
Overview
P.106
P.97
P.95
P.32
Roof
Interior light*
Personal lights*
Inside rear view mirror
Moon roof switches
“SOS” button
Garage door opener switches
Vanity lights*
: If equipped
*: Refer to “Owner’s Manual”.
10
LS600hL_QG_U
Overview
P.79
P.89
P.89
P.84
P.24
P.23
P.27
P.86
Rear audio switches
Rear Interior Switches
Rear air conditioning switches
Rear sunshade switch
Rear door sunshade switches
Power rear seat switches*
Front passenger's seat control switches
Pelvic support seat switches
*
*
11
LS600hL_QG_U
Rear climate control seat switches
: If equipped
*: Location of the switches varies according to the vehicle grade level.
Floor Mat Installation
Use only floor mats designed specifically for vehicles of the same model and model year
as your vehicle. Fix them securely in place onto the carpet.
*
1
Insert the retaining hooks (clips) into
the floor mat eyelets.
2
Turn the upper knob of each retaining
hook (clip) to secure the floor mats in
place.
*: Always align the marks.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
LS600hL_QG_U
12
Hybrid System
Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles.
Be sure you are closely familiar with the characteristics of your vehicle, and operate with
care.
The hybrid system combines the use of a gasoline engine and an electric motor (traction
motor) according to driving conditions, improving fuel efficiency and reducing exhaust
emissions.
For details, refer to the “Owner’s Manual”.
3
■ Hybrid System Indicator
Charge area
1
Shows regenerative charging.
Hybrid Eco area
2
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically
stop and restart under various conditions.
Eco area
Shows that the vehicle is being driven
in an Eco-friendly manner.
Power area
4
Shows that an Eco-friendly driving
range is being exceeded (during full
power driving etc.)
● Hybrid System Indicator is displayed when the driving mode is other than the sport
mode.
● By keeping the indicator needle within Eco area, more Eco-friendly driving can be
achieved.
● Charge area indicates regeneration
the battery.
* status. Regenerated energy will be used to charge
*: When used in this manual, “regeneration” refers to the conversion of energy created by
the movement of the vehicle into electrical energy.
13
LS600hL_QG_U
■ Charging the hybrid battery (traction battery)
● If the shift lever is in N, the hybrid battery (traction battery) will not be charged. Always
put the shift lever in P when the vehicle is stopped. When driving in heavy traffic, operate
the vehicle with the shift lever in D or S to avoid discharging the battery.
● To help prevent the 12-volt battery from becoming discharged, drive the vehicle at least
once a month, and operate the accessories only when the “READY” indicator is on.
When parking the vehicle, make sure the doors and trunk are closed and all lights are
turned off.
■ Regenerative braking
In the following situations, kinetic energy is converted to electric energy and deceleration
force can be obtained in conjunction with the recharging of the hybrid battery (traction battery).
● The accelerator pedal is released while driving with the shift position in D or S.
● The brake pedal is depressed while driving with the shift position in D or S.
■ Sounds and vibrations specific to a hybrid vehicle
There may be no engine sounds or vibration even though the vehicle is able to move. For
safety, apply the parking brake and make sure to shift the shift lever to P when parked.
The following sounds or vibrations may occur when the hybrid system is operating and are
not a malfunction:
● Motor sounds may be heard from the engine compartment.
● Sounds may be heard from the hybrid battery (traction battery) behind the rear seats
when the hybrid system starts or stops.
● Sounds from the hybrid system may be heard when the trunk lid is open.
● Sounds may be heard from the hybrid transmission when the hybrid system starts or
stops.
● Engine sounds may be heard when accelerating sharply.
● Sounds may be heard due to regenerative braking when the accelerator pedal is
released or the brake pedal is depressed.
● Vibration may be felt or sounds may be heard when the gasoline engine starts or stops.
● Cooling fan sounds may be heard from the air intake vents on the package tray.
■ Running out of fuel
When the vehicle has run out of fuel and the hybrid system cannot be started, refuel the
vehicle with at least enough gasoline to make the low fuel level warning light go off. If there is
only a small amount of fuel, the hybrid system may not be able to start. (The minimum
amount of fuel to add to make the low fuel level warning light go out is about 3.4 gal. [13 L,
2.8 Imp. gal.], when the vehicle is on a level surface. This value may vary when the vehicle is
on a slope.)
LS600hL_QG_U
14
Energy Monitor/Consumption Screen
You can view the status of your hybrid system on the multi-information display and the
Remote Touch screen.
■ Energy monitor
● How to display on the Remote Touch screen
Press the “MENU” button on the Remote Touch, then select on the “Menu”
screen, and then select “Fuel Consumption”.
If the “Trip Information” or “Past Record” screen is displayed, select “Energy”.
The “Energy Monitor” screen can be displayed on the side display. For details, refer to
the “Owner’s Manual”.
The flow of energy is displayed on the Remote Touch screen.
Red: gasoline energy
Amber: electrical energy
Light blue: energy recovery
A light blue arrow appears when regenerative braking
occurs.
● How to display on the multi-information display
Press the “DISP” button on the steering wheel several times to select the energy monitor
display.
The flow of energy is indicated by the movement of the arrows
on the multi-information display.
The displayed energy flow, battery level, etc. will change in response to the current driving
conditions.
15
LS600hL_QG_U
■ Fuel consumption
7
3
The consumption screen can be displayed on the side display. For details, refer to the
“Owner’s Manual”.
Press the “MENU” button on the Remote Touch, then select on the “Menu”
screen, and then select “Fuel Consumption”.
● Trip information
If the “Energy Monitor” or “Past Record” screen is displayed, select “Trip Information”.
Resetting the consumption data
1
Fuel consumption in the past 15 min-
2
utes
Current fuel consumption
3
Regenerated energy in the past 15
4
minutes
Average vehicle speed since the hybrid
5
system was started.
Elapsed time since the hybrid system
6
was started.
Cruising range
● Past record
If the “Energy Monitor” or “Trip Information” screen is displayed, select “Past Record”.
Resetting the past record data
1
Best recorded fuel consumption
2
Average fuel consumption
Previous fuel consumption record
4
Updating the average fuel consump-
5
tion data
16
LS600hL_QG_U
■ Hybrid warning message
A message is automatically displayed when a malfunction occurs in the hybrid system or an
improper operation is attempted.
If a warning message is shown on the multiinformation display, read the message and
follow the instructions.
17
LS600hL_QG_U
Keys
Card key*
■ Electronic key
■ Mechanical key
Smart access system with push-button start
(P.1 9, 35 )
Wireless remote control (P. 1 9 )
*:If equipped
.
To take out the mechanical key:
Electronic keys: Slide the release lever and
take the key out.
Card key: Press the lock release button and
take the key out.
After using the mechanical key, store it in
the electronic key. Carry the mechanical
key together with the electronic key. If
the electronic key battery is depleted or
the entry function does not operate
properly, you will need the mechanical
key.
LS600hL_QG_U
18
■ Wireless remote control
The following operations can be performed simply by carrying the electronic key
(including the card key) on your person, for example in your pocket. (The driver should
always carry the electronic key.)
For details on starting the hybrid system, see page 35.
Smart Access System with Push-button Start
Locks all the doors
1
Check that the door is securely locked.
Unlocks all the doors
2
Pressing the button unlocks the driver’s
door. Pressing the button again within
3 seconds unlocks the other doors.
Opens the windows and moon roof
3
(press and hold)
Opens the trunk (press and hold)
4
The trunk lid automatically opens fully.
Sounds the alarm (press and hold)
5
*
*: This setting must be changed using the
customize function.
■ Entering the vehicle
19
Grip the driver’s door handle to unlock the
door. Grip the passenger’s door handle to
unlock all the doors.
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for 3 seconds after the doors are locked.
LS600hL_QG_U
■ Exiting the vehicle
■ Opening the trunk
Press the lock button to lock the door.
Check that the door is securely locked.
Pressing and holding the button closes
the windows and moon roof.
Press the button.
The trunk lid automatically opens fully.
When all the doors are unlocked using
one of the following methods, the trunk
can be opened without the electronic
key:
• Entry function
•Wireless remote control
• Door lock switches
• Automatic door unlocking system
• Mechanical key
For details on what to do when the electronic key does not operate properly, see page 111.
20
LS600hL_QG_U
Theft Deterrent System
■ Immobilizer system
The indicator light flashes after the power
switch has been turned off to indicate that
the system is operating.
The indicator light stops flashing after the
power switch has been turned to ACCESSORY or ON mode to indicate that the system has been canceled.
■ Alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
To s et t h e al a r m :
Close the doors, trunk and hood, and lock all the doors. The system will be set automatically
after 30 seconds.
The indicator light changes from being on to flashing when the system is set.
To deactivate or stop the alarm:
● Unlock the doors or open the trunk.
● Turn the power switch to ACCESSORY or ON mode, or start the hybrid system. (The
alarm will be deactivated or stopped after a few seconds.)
21
LS600hL_QG_U
Front Seats
Passenger’s seatDriver’s seat
3
6
■ Adjustment procedure
Seat position adjustment switch
1
The height of the driver's head restraint is automatically adjusted simultaneously with
the seat position adjustment operation.
Seatback angle adjustment switch
2
Head restraint height adjustment switch
Seat cushion (front) angle adjustment switch
4
Vertical height adjustment switch
5
Lumbar/pelvic support adjustment switch
Driver’s seat: firmness, vertical, backward and forward positioning
Front passenger’s seat: firmness, backward and forward positioning
Seat cushion length adjustment switch
7
22
LS600hL_QG_U
■ Operating the front passenger's seat from driver's seat or rear seat
2
3
■
Operating the front passenger's seat from the driver's seat
5-seat models
Tilts the seatback forward
1
Tilts the seatback backward
Moves the seat forward
3
Moves the seat backward
4
4-seat models
Tilts the seatback forward and moves
1
the seat forward
Tilts the seatback backward and moves
2
the seat backward
If the rear seat is not in the neutral position, pressing the button once will
move the rear seat to the neutral position. Pressing the button again will
move the front passenger's seat to the
neutral position.
Tilts the seatback forward
Tilts the seatback backward
4
Moves the seat forward
5
Moves the seat backward
6
23
LS600hL_QG_U
■ Operating the front passenger’s seat from the rear seat (4-seat models)
2
3
Moves the front passenger’s seat for-
1
ward
The signal beeps when the seat operation stops at the forward limit.
Moves the front passenger’s seat backward
The seatback will return to the neutral
position. If the head restraint is folded,
it will rise before the seatback moves.
The operation can be performed when the power switch is in ON mode.
Power Rear Seat
5-seat models
Seat selection switch
1
Seat position adjustment switch
2
Seatback upper angle adjustment
switch
LS600hL_QG_U
Head restraint height adjustment
4
switch
Pelvic support seat switches
5
24
4-seat models
Seat selection switch
1
Seat position adjustment switch
2
Seatback upper angle adjustment
3
switch
Head restraint height adjustment
4
switch
Seatback angle adjustment switch
5
6
7
8
9
■ Returning the rear seat from the front seats
5-seat models
The seat will return to the neutral position
while the button is pressed and held.
Ottoman angle adjustment switch
Front passenger’s seat control switch
Relaxation mode switch
Rear seat relaxation system/pelvic
support seat controller
25
LS600hL_QG_U
4-seat models
1
The seat will return to the neutral position
while the button is pressed and held.
■ Relaxation mode operation (relaxation seat)
Enters relaxation mode
Returns to the neutral position
2
The rear seat seatback, ottoman and the
front passenger seat operate simultaneously.
The operation can be performed when the
power switch is in ON mode.
When a rear door is opened, the seat on that side will automatically return to the neutral
position.
26
LS600hL_QG_U
■ Pelvic support seat with seat vibrator
1
5-seat models
Support plate position adjustment switch
Vibration switch
2
Press to operate the vibration function. Vibration will start in the same speed
level as when previously operated. Each time is pressed, the speed changes
between 3 levels. Pressing “OFF” stops the vibration function.
4-seat models
Support plate position adjustment
1
switch
Vibration switch
2
Press to operate the vibration
function. Vibration will start in the same
speed level as when previously operated. Each time is pressed, the
speed changes between 3 levels.
Pressing “OFF” stops the vibration
function.
Automatic stop function: Vibration will automatically stop approximately 15 minutes after
starting.
27
LS600hL_QG_U
■ Rear seat relaxation system (4-seat models)
Turns the system on and off
1
If no buttons are selected within
approximately 3 minutes of operating
this switch, the system will automatically turn off.
Starts the
2
Partial pressure for the whole back
Starts the
3
Stretches and relaxes the lower back
Starts operation for the upper back
4
Starts operation for the lower back
5
Adjusts the intensity of the air pressure
6
3 intensity levels are available.
Adjusts the speed of the air unit
7
3 speed levels are available.
Automatic stop function: Each operation will automatically stop approximately 15 minutes
after starting.
program
program
LS600hL_QG_U
28
Driving Position Memory
This feature automatically adjusts the front seats, steering wheel, outside rear view mirrors and height of seat belt shoulder anchor to suit your preferences.
■ Driving position memory
Your preferred driving position (the position of the driver's seat, steering wheel, outside rear
view mirrors and height of seat belt shoulder anchor) can be recorded and recalled by
pressing a switch.
Three different driving positions can be recorded into memory.
■ Recording procedure
1
Adjust the driver’s seat, steering wheel, outside rear view mirrors and seat belt shoulder
anchor height to the desired positions.
2
To record the position of the front passenger’s seat, adjust the front passenger’s seat to the
desired position and perform step using the switches on the front passenger’s side.
2
Press the “SET” switch, then within 3 seconds press switch “1”, “2” or “3” until the
buzzer sounds.
If the selected switch has already been
preset, the previously recorded position
will be overwritten.
■ Recall procedure
29
Press one of the switches for the driving
position you want to recall until the buzzer
sounds.
Vehicles with relaxation seat:
When retractable table (4-seat models)
or ottoman is used, rearward memories
cannot be recalled.
LS600hL_QG_U
■ Memory recall function (driver's side only)
The rear seat position can be memorized and recalled with the touch of a button.
Each electronic key (including a card key) can be registered to recall your preferred driving
position.
■ Registering procedure
Using the wireless remote control
While pressing the desired switch (“1”, “2”
or “3”), press on the wireless remote
control until the buzzer sounds.
To prevent unintended triggering of the
alarm, open and close a door once after a
driving position has been recorded. (If a
door is not opened within 30 seconds after
is pressed, the doors will be locked
again and the alarm will automatically be
set.)
Using the door lock switch
Carry only one of the keys (including the card key) to which you want to link the driving position. If 2 or more keys are in the vehicle, the driving position cannot be linked properly.
While pressing the recalled switch, press
and hold the door lock switch (either lock
or unlock) until the buzzer sounds.
Rear Seat Position Memory
■ Entering a position to memory
LS600hL_QG_U
Press the “SET” button until the signal
beeps.
If the preset is being used, the previously
recorded seat position will be overwritten.
30
Loading...
+ 84 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.