LEXMARK E32X Service Manual

Lexmark E32X

4500-001

Extracted From Service Manual

4500–E32x

Edition: September 2001 The following paragraph does not apply to any country where such provisions are

inconsiste nt with local law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS

PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRE SS OR IMPLIED , INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

Comments may be addressed to Lexmark International, Inc., Department D22A/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A or e-mail at ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In other countries, contact your point of purchase.

Lexmark, Lexmark with diamond design, ImageQuick, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

Other trademarks are the property of their respective owners.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Govern m ent is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DF ARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550.

U.S.A. P/N: 12G9065

4500–32x

7. Parts Catalog

How to Use this Parts Catalog

• SIMILAR ASSEMBLIES: If two assemblies contain a majority of

identical parts, they are shown on the same list. Common parts are shown by one index number. Parts peculiar to one or the other of the assemblies are listed separately and identified by description.

• AR: (As Required) in the Units column indicates that the

quantity is not the same for all machines.

• NS: (Not Shown) in the Asm-Index column indicates that the

part is procurable but is not pictured in the illustration.

• PP: (Parts Packet) in the parts description column indicates the

part is contained in a parts packet.

Parts Catalog 7-1

4500–32x

Assembly 1: Co vers

7-2 Service Manual

4500–32x

Assembly 1: Covers

AsmIndex

1–1 12G4456 1 Assembly, Tray Extension

2 12G4455 1 Assembly, Cover, Rear 3 12G4458 1 Co ver, Bottom 4 12G4453 1 Cover, Right Side 5 12G4457 1 Assembly, Operator Panel 6 12G4466 1 Hinge, Right Rear 7 12G4468 1 Hinge, Right Front 8 12G4535 1 Spring, Front Cover Right 9 12G4543 1 Co ver, Fro nt–Mod el E320

9 12G4542 1 Co ver, Fro nt–Mod el E322 10 12G4450 1 Cover, Access 11 12G4536 1 Spring, Front Cover Left 12 12G4469 1 Hinge, Left Front 13 12G4467 1 Hinge, Left Rear 14 12G4459 1 Duct, Cooling 15 12G4451 1 Cover, Left Side 16 12G4452 1 Cover, Top

NS 12G0176 1 Cover, Media

Part Number

Units Description

Parts Catalog 7-3

4500–32x

Assembly 2: Frame

7-4 Service Manual

4500–32x

Assembly 2: Frame

AsmIndex

2–1 12G4470 1 Roll, Transf e r

2 12G4471 1 Bearing, Transfer

3 12G4473 1 B/M, Rail

4 12G4534 1 Bracket, Right

5 12G4465 1 Assembly, Charge Roll

6 12G4464 1 Spring, Charge Roll Right

7 12G4462 1 Roll, Charge

8 12G4463 1 Spring, Charge Roll Left

9 12G4510 1 Spring, HVPS Contact 10 12G4533 1 Bracket, Left 11 12G4460 1 Fan, Cooling 12 12G4461 1 Switch Assembly, Power 13 12G4511 1 Strap, Contact 14 12G4512 1 Strap, Contact

Part Number

Units Description

Parts Catalog 7-5

+ 16 hidden pages