Lexmark C540n, C543dn, C544n, C544dn, C544dtn Service Manual

...

Lexmark™ C540n, C543dn, C544n,

C544dn, C544dtn, and C544dw

• Table of contents

• Start diagnostics

Edition: October 14, 2008

5025-2xx, 4xx

• Safety and notices

• Trademarks

• Index

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

5025-2xx, 4xx

Edition: October 14, 2008

The following paragraph does not apply to any country where such provisions are inconsistent with local law:

LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

Comments may be addressed to Lexmark International, Inc., Department D22A/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A or e-mail at ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

All other trademarks are the property of their respective owners.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

P/N 12G9819

5025-2xx, 4xx

Table of contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Notices and safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Laser notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Options and features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Printer specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Print quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Connectivity (network support) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Data streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Power and electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Environment specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Media handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Input and output sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Duplex capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Media input size specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Media input type specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Media output size and type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Media guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Paper characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Unacceptable paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Selecting paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Selecting preprinted forms and letterhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Storing paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Using recycled paper and other office papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Tools required for service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

Diagnostic information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

POR (Power-On Reset) sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Symptom tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Printer symptom table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Print quality symptom table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Error codes and messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

User status and customer attendance messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Paper Jam messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Service error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Service checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

122.xx—Fuser temperature incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

90x.xx error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

925.01—Fan error service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

930.xx–935.xx—Printhead errors service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

Table of contents iii

5025-2xx, 4xx

936.xx, 937.xx—Transport motor service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-26

950.xx NVRAM Failure service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-26

Autocompensator mechanism service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27

Bin full sensor service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27

Dead printer service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28

Duplex/manual feed sensor (S1) service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-29

Front door sensor or switches service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30

Fuser exit sensor service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31

Fuser service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-32

Input sensor (S2) service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-34

Main drive gear assembly (EP drive) service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35

Operator panel service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-36

One or more operator panel buttons fail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-36

Operator panel display blank, five beeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-37

Operator panel display blank, printer beeps five times and pauses . . . . . . . . . . . . . . . . . . . . . .2-38

Operator panel displays all diamonds, no beeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-39

Operator panel displays all diamonds, five beeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40

Operator panel display is dim and unchanging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-41

Print quality service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-42

Print quality—background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-43

Print quality—blank page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44

Print quality—blurred or fuzzy print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-45

Print quality—half-color page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-45

Print quality—horizontal banding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-46

Print quality—horizontal line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-46

Print quality—insufficient fusing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-47

Print quality—missing image at edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-47

Print quality—mottle (2–5mm speckles) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-47

Print quality—narrow vertical line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-48

Print quality—random marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-48

Print quality—residual image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-49

Print quality—solid color page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-50

Print quality—vertical banding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-50

Printhead service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-51

Toner meter cycle (TMC) card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-52

Toner meter sensors (Y, C, M, K) on TMC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52

Transfer roll service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-53

Tray 1 sensor service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-53

User operator panel and Administration menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-55

Printer operator panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-55

Operator panel buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-55

Menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-56

Diagnostic aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Accessing service menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

Diagnostics Menu (Diag Menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Diagnostics Menu structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Available tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Skew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5

Quick Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5

Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7

Print Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10

Input source tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10

Print quality test pages (Prt Quality Pgs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

Hardware Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

Panel Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

Button Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12

DRAM Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12

iv Service Manual

5025-2xx, 4xx

Duplex Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Quick Test (duplex) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Top Margin (duplex) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Left Margin (duplex) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Input Tray Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Feed Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Sensor Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Base Sensor Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Miscellaneous tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Motor Detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Device Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Flash Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Page counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

Engine Setting 1 through 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

Model Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

Configuration ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

ITU Barcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

Reset Fuser Cnt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

EP Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

EP Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

Fuser Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

DC Charge Adjust, Dev Bias Adj, Transfer Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

TPS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

Right or Left TPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

Cal Ref Adj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

Reset Color Cal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Menu Settings Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Display Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Print Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

Clear Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

EXIT Diags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23

Configuration menu (Config Menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

Available tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

Prt Quality Pgs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

Color Trapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Menu Settings Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Panel Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

PPDS Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26

Energy Conserve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26

Auto Color Adj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27

Font Sharpening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Exit Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27

Paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28

Avoiding jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28

Understanding jam numbers and locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29

200 paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

201 paper jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

202 paper jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31

230 paper jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32

235 paper jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32

. . . . . . . . 3-27

Table of contents v

5025-2xx, 4xx

24x paper jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-32

250 paper jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-32

Theory of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33

Print engine theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-33

Electrophotographic process (EP process) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-33

Electrophotographic process basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-33

Step 1: Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34

Step 2: Expose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-35

Step 3: Develop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36

Step 4a: First transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-37

Step 4b: Second transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38

Step 5: Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-39

Step 6: Clean/erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40

Paper path, transport components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42

Paper path Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42

Transport components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43

Duplex process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44

Color theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45

What is RGB color? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45

What is CMYK color? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45

How is color specified in a document to be printed? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45

How does the printer know what color to print? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45

Should I use PostScript or PCL emulation printer software? What settings should

I use for the best color? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45

Why doesn't the printed color match the color I see on the computer screen? . . . . . . . . . . . . .3-45

The printed page appears tinted. Can I adjust the color? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45

My color transparencies seem dark when they are projected. Is there anything I can

do to improve the color? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46

What is manual color correction? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46

How can I match a particular color (such as a corporate logo)? . . . . . . . . . . . . . . . . . . . . . . . .3-47

What are detailed Color Samples, and how do I access them? . . . . . . . . . . . . . . . . . . . . . . . . .3-47

Repair information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Handling ESD-sensitive parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Removal procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Front cover assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Left cover assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

Operator panel bezel and name plate removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8

Operator panel removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9

Right cover assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10

Rear shield removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Top cover assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12

Autocompensator mechanism (ACM) removal—standard tray . . . . . . . . . . . . . . . . . . . . . . . . . .4-15

Bin full sensor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-18

Bin full sensor flag and exit deflector removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-18

Controller board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19

Developer unit removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21

Duplex sensor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21

Exit deflector and bin full sensor flag removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-24

Fuser assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-26

Fuser drive motor assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-29

Fuser exit sensor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-30

High-voltage power supply (HVPS) assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

Image transfer unit (ITU) removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-33

Imaging unit (IU) removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-35

Low-voltage power supply (LVPS) assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-37

Lower frame removal, right and left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-39

Left lower frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

Right lower frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

vi Service Manual

5025-2xx, 4xx

Main drive gear assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45

Pick tires removal—standard media tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48

Printhead removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-49

Toner cartridge contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50

Toner density sensor (TDS) removal—left or right sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-53

Toner meter cycle (TMC) card removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55

Tray present sensor removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-57

USB port connector removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-59

Waste toner bottle removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-60

Wireless network antenna removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61

Wireless network card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-63

Connector locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Controller board diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

High-voltage power supply (HVPS) diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Low-voltage power supply (LVPS) diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Toner meter cycle (TMC) card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

Wireless network card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

Preventive maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Safety inspection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Parts catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

How to use this parts catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Assembly 1: Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Assembly 2: Frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Assembly 3: Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Assembly 4: Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

Assembly 5: Options and miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-1

Part number index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-7

Table of contents vii

5025-2xx, 4xx

viii Service Manual

10-14-2008 5025-2xx, 4xx

Notices and safety information

CAUTION

This product contains a lithium battery. THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. Discard used batteries according to the battery manufacturer’s instructions and local regulations.

The laser notice label may be affixed to this printer.

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 5 milliwatt gallium arsenide laser operating in the wavelength region of 645-670 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser

Der Drucker erfüllt gemäß amtlicher Bestätigung der USA die Anforderungen der Bestimmung DHHS (Department of Health and Human Services) 21 CFR Teil J für Laserprodukte der Klasse I (1). In anderen Ländern gilt der Drucker als Laserprodukt der Klasse I, der die Anforderungen der IEC (International Electrotechnical Commission) 60825-1 gemäß amtlicher Bestätigung erfüllt.

Laserprodukte der Klasse I gelten als unschädlich. Im Inneren des Druckers befindet sich ein Laser der Klasse IIIb (3b), bei dem es sich um einen Galliumarsenlaser mit 5 Milliwatt handelt, der Wellen der Länge 645-670 Nanometer ausstrahlt. Das Lasersystem und der Drucker sind so konzipiert, daß im Normalbetrieb, bei der Wartung durch den Benutzer oder bei ordnungsgemäßer Wartung durch den Kundendienst Laserbestrahlung, die Klasse I übersteigen würde, Menschen keinesfalls erreicht.

Avis relatif à l’utilisation de laser

Pour les Etats-Unis : cette imprimante est certifiée conforme aux provisions DHHS 21 CFR alinéa J concernant les produits laser de Classe I (1). Pour les autres pays : cette imprimante répond aux normes IEC 60825-1 relatives aux produits laser de Classe I.

Les produits laser de Classe I sont considérés comme des produits non dangereux. Cette imprimante est équipée d’un laser de Classe IIIb (3b) (arséniure de gallium d’une puissance nominale de 5 milliwatts) émettant sur des longueurs d’onde comprises entre 645 et 670 nanomètres. L’imprimante et son système laser sont conçus pour impossible, dans des conditions normales d’utilisation, d’entretien par l’utilisateur ou de révision, l’exposition à des rayonnements laser supérieurs à des rayonnements de Classe I .

Notices and safety information ix

5025-2xx, 4xx 10-14-2008

Avvertenze sui prodotti laser

Questa stampante è certificata negli Stati Uniti per essere conforme ai requisiti del DHHS 21 CFR Sottocapitolo J per i prodotti laser di classe 1 ed è certificata negli altri Paesi come prodotto laser di classe 1 conforme ai requisiti della norma CEI 60825-1.

I prodotti laser di classe non sono considerati pericolosi. La stampante contiene al suo interno un laser di classe IIIb (3b) all’arseniuro di gallio della potenza di 5mW che opera sulla lunghezza d’onda compresa tra 645 e 670 nanometri. Il sistema laser e la stampante sono stati progettati in modo tale che le persone a contatto con la stampante, durante il normale funzionamento, le operazioni di servizio o quelle di assistenza tecnica, non ricevano radiazioni laser superiori al livello della classe 1.

Avisos sobre el láser

Se certifica que, en los EE.UU., esta impresora cumple los requisitos para los productos láser de Clase I (1) establecidos en el subcapítulo J de la norma CFR 21 del DHHS (Departamento de Sanidad y Servicios) y, en los demás países, reúne todas las condiciones expuestas en la norma IEC 60825-1 para productos láser de Clase I (1).

Los productos láser de Clase I no se consideran peligrosos. La impresora contiene en su interior un láser de Clase IIIb (3b) de arseniuro de galio de funcionamiento nominal a 5 milivatios en una longitud de onda de 645 a 670 nanómetros. El sistema láser y la impresora están diseñados de forma que ninguna persona pueda verse afectada por ningún tipo de radiación láser superior al nivel de la Clase I durante su uso normal, el mantenimiento realizado por el usuario o cualquier otra situación de servicio técnico.

Declaração sobre Laser

A impressora está certificada nos E.U.A. em conformidade com os requisitos da regulamentação DHHS 21 CFR Subcapítulo J para a Classe I (1) de produtos laser. Em outros locais, está certificada como um produto laser da Classe I, em conformidade com os requisitos da norma IEC 60825-1.

Os produtos laser da Classe I não são considerados perigosos. Internamente, a impressora contém um produto laser da Classe IIIb (3b), designado laser de arseneto de potássio, de 5 milliwatts ,operando numa faixa de comprimento de onda entre 645 e 670 nanómetros. O sistema e a impressora laser foram concebidos de forma a nunca existir qualquer possiblidade de acesso humano a radiação laser superior a um nível de Classe I durante a operação normal, a manutenção feita pelo utilizador ou condições de assistência prescritas.

Laserinformatie

De printer voldoet aan de eisen die gesteld worden aan een laserprodukt van klasse I. Voor de Verenigde Staten zijn deze eisen vastgelegd in DHHS 21 CFR Subchapter J, voor andere landen in IEC 60825-1.

Laserprodukten van klasse I worden niet als ongevaarlijk aangemerkt. De printer is voorzien van een laser van klasse IIIb (3b), dat wil zeggen een gallium arsenide-laser van 5 milliwatt met een golflengte van 645-670 nanometer. Het lasergedeelte en de printer zijn zo ontworpen dat bij normaal gebruik, bij onderhoud of reparatie conform de voorschriften, nooit blootstelling mogelijk is aan laserstraling boven een niveau zoals voorgeschreven is voor klasse 1.

Lasermeddelelse

Printeren er godkendt som et Klasse I-laserprodukt, i overenstemmelse med kravene i IEC 60825-1.

x Service Manual

10-14-2008 5025-2xx, 4xx

Klasse I-laserprodukter betragtes ikke som farlige. Printeren indeholder internt en Klasse IIIB (3b)-laser, der nominelt er en 5 milliwatt galliumarsenid laser, som arbejder på bølgelængdeområdet 645-670 nanometer. Lasersystemet og printeren er udformet således, at mennesker aldrig udsættes for en laserstråling over Klasse I-niveau ved normal drift, brugervedligeholdelse eller obligatoriske servicebetingelser.

Notices and safety information xi

5025-2xx, 4xx 10-14-2008

Laserilmoitus

Tämä tulostin on sertifioitu Yhdysvalloissa DHHS 21 CFR Subchapter J -standardin mukaiseksi luokan I (1) lasertuotteeksi ja muualla IEC 60825-1 -standardin mukaiseksi luokan I lasertuotteeksi.

Luokan I lasertuotteita ei pidetä haitallisina. Tulostimen sisällä on luokan IIIb (3b) laser, joka on nimellisteholtaan 5 mW:n galliumarsenidilaser ja toimii 645 - 670 nanometrin aallonpituuksilla. Laserjärjestelmä ja tulostin ovat rakenteeltaan sellaisia, että käyttäjä ei joudu alttiiksi luokkaa 1 suuremmalle säteilylle normaalin käytön, ylläpidon tai huollon aikana.

Huomautus laserlaitteesta

Tämä kirjoitin on Yhdysvalloissa luokan I (1) laserlaitteiden DHHS 21 CFR Subchapter J -määrityksen mukainen ja muualla luokan I laserlaitteiden IEC 60825-1 -määrityksen mukainen.

Luokan I laserlaitteiden ei katsota olevan vaarallisia käyttäjälle. Kirjoittimessa on sisäinen luokan IIIb (3b) 5 milliwatin galliumarsenidilaser, joka toimii aaltoalueella 645 - 670 nanometriä. Laserjärjestelmä ja kirjoitin on suunniteltu siten, että käyttäjä ei altistu luokan I määrityksiä voimakkaammalle säteilylle kirjoittimen normaalin toiminnan, käyttäjän tekemien huoltotoimien tai muiden huoltotoimien yhteydessä.

VARO! Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen.

VARNING! Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen.

Laser-notis

Denna skrivare är i USA certifierad att motsvara kraven i DHHS 21 CFR, underparagraf J för laserprodukter av Klass I (1). I andra länder uppfyller skrivaren kraven för laserprodukter av Klass I enligt kraven i IEC 60825-1.

Laserprodukter i Klass I anses ej hälsovådliga. Skrivaren har en inbyggd laser av Klass IIIb (3b) som består av en laserenhet av gallium-arsenid på 5 milliwatt som arbetar i våglängdsområdet 645-670 nanometer. Lasersystemet och skrivaren är utformade så att det aldrig finns risk för att någon person utsätts för laserstrålning över Klass I-nivå vid normal användning, underhåll som utförs av användaren eller annan föreskriven serviceåtgärd.

Laser-melding

Skriveren er godkjent i USA etter kravene i DHHS 21 CFR, underkapittel J, for klasse I (1) laserprodukter, og er i andre land godkjent som et Klasse I-laserprodukt i samsvar med kravene i IEC 60825-1.

Klasse I-laserprodukter er ikke å betrakte som farlige. Skriveren inneholder internt en klasse IIIb (3b)-laser, som består av en gallium-arsenlaserenhet som avgir stråling i bølgelengdeområdet 645-670 nanometer. Lasersystemet og skriveren er utformet slik at personer aldri utsettes for laserstråling ut over klasse I-nivå under vanlig bruk, vedlikehold som utføres av brukeren, eller foreskrevne serviceoperasjoner.

xii Service Manual

10-14-2008 5025-2xx, 4xx

Avís sobre el Làser

Segons ha estat certificat als Estats Units, aquesta impressora compleix els requisits de DHHS 21 CFR, apartat J, pels productes làser de classe I (1), i segons ha estat certificat en altres llocs, és un producte làser de classe I que compleix els requisits d’IEC 60825-1.

Els productes làser de classe I no es consideren perillosos. Aquesta impressora conté un làser de classe IIIb (3b) d’arseniür de gal.li, nominalment de 5 mil.liwats, i funciona a la regió de longitud d’ona de 645-670 nanòmetres. El sistema làser i la impressora han sigut concebuts de manera que mai hi hagi exposició a la radiació làser per sobre d’un nivell de classe I durant una operació normal, durant les tasques de manteniment d’usuari ni durant els serveis que satisfacin les condicions prescrites.

Notices and safety information xiii

5025-2xx, 4xx 10-14-2008

xiv Service Manual

10-14-2008 5025-2xx, 4xx

Safety information

• The safety of this product is based on testing and approvals of the original design and specific

components. The manufacturer is not responsible for safety in the event of use of unauthorized

replacement parts.

• The maintenance information for this product has been prepared for use by a professional service person

and is not intended to be used by others.

• There may be an increased risk of electric shock and personal injury during disassembly and servicing of

this product. Professional service personnel should understand this and take necessary precautions.

• CAUTION: When you see this symbol, there is a danger from hazardous voltage in the area of the

product where you are working. Unplug the product before you begin, or use caution if the product must receive power in order to perform the task.

Consignes de sécurité

• La sécurité de ce produit repose sur des tests et des

agréations portant sur sa conception d'origine et sur des composants particuliers. Le fabricant n'assume

aucune responsabilité concernant la sécurité en cas d'utilisation de pièces de rechange non agréées.

• Les consignes d'entretien et de réparation de ce produit s'adressent uniquement à un personnel de

maintenance qualifié.

• Le démontage et l'entretien de ce produit pouvant présenter certains risques électriques, le personnel

d'entretien qualifié devra prendre toutes les précautions nécessaires.

• ATTENTION : Ce symbole indique la présence d'une tension dangereuse dans la partie du

produit sur laquelle vous travaillez. Débranchez le produit avant de commencer ou faites preuve de vigilance si l'exécution de la tâche exige que le produit reste sous tension.

Norme di sicurezza

• La sicurezza del prodotto si basa sui test e sull'approvazione del progetto originale e dei componenti

specifici. Il produttore non è responsabile per la sicurezza in caso di sostituzione non autorizzata delle

parti.

• Le informazioni riguardanti la manutenzione di questo prodotto sono indirizzate soltanto al personale di

assistenza autorizzato.

• Durante lo smontaggio e la manutenzione di questo prodotto,

il rischio di subire scosse elettriche e danni alla persona è più elevato. Il personale di assistenza

autorizzato deve, quindi, adottare le precauzioni necessarie.

• ATTENZIONE: Questo simbolo indica la presenza di tensione pericolosa nell'area del prodotto.

Scollegare il prodotto prima di iniziare o usare cautela se il prodotto deve essere alimentato per eseguire l'intervento.

Safety information xv

5025-2xx, 4xx 10-14-2008

Sicherheitshinweise

• Die Sicherheit dieses Produkts basiert auf Tests und Zulassungen des ursprünglichen Modells und

bestimmter Bauteile. Bei Verwendung nicht genehmigter Ersatzteile wird vom Hersteller keine Verantwortung oder Haftung für die Sicherheit übernommen.

• Die Wartungsinformationen für dieses Produkt sind ausschließlich für die Verwendung durch einen

Wartungsfachmann bestimmt.

• Während des Auseinandernehmens und der Wartung des Geräts besteht ein zusätzliches Risiko eines

elektrischen Schlags und körperlicher Verletzung. Das zuständige Fachpersonal sollte entsprechende Vorsichtsmaßnahmen treffen.

• ACHTUNG: Dieses Symbol weist auf eine gefährliche elektrische Spannung hin, die in diesem

Bereich des Produkts auftreten kann. Ziehen Sie vor den Arbeiten am Gerät den Netzstecker des Geräts, bzw. arbeiten Sie mit großer Vorsicht, wenn das Produkt für die Ausführung der Arbeiten an den Strom angeschlossen sein muß.

Pautas de Seguridad

• La seguridad de este producto se basa en pruebas y aprobaciones del diseño original y componentes

específicos. El fabricante no es responsable de la seguridad en caso de uso de piezas de repuesto no autorizadas.

• La información sobre el mantenimiento de este producto está dirigida exclusivamente al personal

cualificado de mantenimiento.

• Existe mayor riesgo de descarga eléctrica y de daños personales durante el desmontaje y la reparación de

la máquina. El personal cualificado debe ser consciente de este peligro y tomar las precauciones necesarias.

• PRECAUCIÓN: este símbolo indica que el voltaje de la parte del equipo con la que está

trabajando es peligroso. Antes de empezar, desenchufe el equipo o tenga cuidado si, para trabajar con él, debe conectarlo.

Informações de Segurança

• A segurança deste produto baseia-se em testes e aprovações do modelo original e de componentes

específicos. O fabricante não é responsável pela segunrança, no caso de uso de peças de substituição não autorizadas.

• As informações de segurança relativas a este produto destinam-se a profissionais destes serviços e não

devem ser utilizadas por outras pessoas.

• Risco de choques eléctricos e ferimentos graves durante a desmontagem e manutenção deste produto.

Os profissionais destes serviços devem estar avisados deste facto e tomar os cuidados necessários.

• CUIDADO: Quando vir este símbolo, existe a possível presença de uma potencial tensão

perigosa na zona do produto em que está a trabalhar. Antes de começar, desligue o produto da tomada eléctrica ou seja cuidadoso caso o produto tenha de estar ligado à corrente eléctrica para realizar a tarefa necessária.

xvi Service Manual

10-14-2008 5025-2xx, 4xx

Informació de Seguretat

• La seguretat d'aquest producte es basa en l'avaluació i aprovació del disseny original i els components

específics.

El fabricant no es fa responsable de les qüestions de

seguretat si s'utilitzen peces de recanvi no autoritzades.

• La informació pel manteniment d’aquest producte està orientada exclusivament a professionals i no està

destinada

a ningú que no ho sigui.

• El risc de xoc elèctric i de danys personals pot augmentar durant el procés de desmuntatge i de servei

d’aquest producte. El personal professional ha d’estar-ne assabentat i prendre

les mesures convenients.

• PRECAUCIÓ: aquest símbol indica que el voltatge de la part de l'equip amb la qual esteu

treballant és perillós. Abans de començar, desendolleu l'equip o extremeu les precaucions si, per treballar amb l'equip, l'heu de connectar.

Safety information xvii

5025-2xx, 4xx 10-14-2008

Preface

This manual contains maintenance procedures for service personnel. It is divided into the following chapters:

1. General information contains a general description of the printer and the maintenance approach used to

repair it. Special tools and test equipment, as well as general environmental and safety instructions, are discussed.

2. Diagnostic information contains an error indicator table, symptom tables, and service checks used to

isolate failing field replaceable units (FRUs).

3. Diagnostic aids contains tests and checks used to locate or repeat symptoms of printer problems.

4. Repair information provides instructions for making printer adjustments and removing and installing

FRUs.

5. Connector locations uses illustrations to identify the connector locations and test points on the printer.

6. Preventive maintenance contains the lubrication specifications and recommendations to prevent

problems.

7. Parts catalog contains illustrations and part numbers for individual FRUs.

Conventions

Note: A note provides additional information. Warning: A warning identifies something that might damage the product hardware or software.

There are several types of caution statements:

CAUTION

A caution identifies something that might cause a servicer harm.

CAUTION

This type of caution indicates there is a danger from hazardous voltage in the area of the product where you are working. Unplug the product before you begin, or use caution if the product must receive power in order to perform the task.

CAUTION

This type of caution indicates a hot surface.

CAUTION

This type of caution indicates a tipping hazard.

xviii Service Manual

5025-2xx, 4xx

1. General information

The Lexmark™ C54x printer (5024-2xx, 4xx) is a color network printer in a compact size. Some models have internal duplexing, USB-A host ports for flash drives on the operator panel, and an optional 650-sheet Duo Drawer with 550 sheets in the input tray and 100-sheets for the multipurpose feeder. The Lexmark C544dw comes with wireless network and duplex printing.

Models

Model name

Lexmark C540n 5025-210 Ethernet network

Lexmark C543dn 5025-230 Ethernet network, duplex

Lexmark C544n 5025-410 Ethernet network, USB-A host ports for flash drives

Lexmark C544dn 5025-430 USB-A host ports for flash drives, duplex

Lexmark C544dw 5025-43W 802.11n network wireless network, duplex

Options and features

Machine type/ model

Description

Certain options are available on selected printer models only.

Available options include:

• 650-Sheet Duo Drawer—a 550-sheet drawer with a 100-sheet multipurpose feeder (MP Feeder).

• Additional memory—One 128, 256, or 512MB memory card may be added.

• Flash memory card—One 64MB card may be added.

• Font cards—One

General information 1-1

5025-2xx, 4xx

Printer specifications

Memory

✔—Supported ✘—Not supported

Memory

Optional slots One slot Standard DIMM sizesa 128MB Optional (DDR2) 128MB, 256MB, and 512MB

Maximum printer memory

Option Slots (single slot is available or either font or flash memory card)

Font card support N/A 1 font card Optional user flash memory card sizes N/A 64MB

Connections

USB 2.0 High Speed

Ethernet 10/100 BaseTx

USB-A (allows direct USB printing using approved USB flash memory device)

PictBridge (allows printing photos directly from a compatible camera)

Wireless standard 802.11 b/g/n

Dual Inline Memory Module. An optional memory card that can be plugged into an available memory slot.

The maximum usable DDRSDRAM is standard (soldered) plus 512MB.

640MB

Lexmark C540n, C543dn

✔✔

✘✔

✘

Lexmark C544n,

C544dn, C544dw

(C544dw only)

✔

Print quality

During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure highquality printing and good performance throughout the life of the printer. The fuser and ITU replacement should be determined by checking the last sheet of the Menu Settings Page. Either OK or Replace appears.

To print a Menu Settings page:

1. Press Menu ( ) on the operator panel.

2. Select Reports from the Admin Menu, and press Select ().

3. Select Menu Settings, and press Select ().

Replacement is recommended every 30,000 pages for the imaging unit.

• 4800C Q (default) full printer speed

• 1200 dpi (reduced printer speed) is supported in PS and PCL only

1-2 Service Manual

5025-2xx, 4xx

Connectivity (network support)

✔—Supported ✘—Not supported

Lexmark C540n, C543dn,

Network protocol

C544dn Lexmark C544dw

Standard Ethernet 10/100 Base T

Standard USB-B (Full speed) device port

USB-A host ports

(In front, low/full speed) This port only supports the following flash drives and file types:

Supported flash drives (512 MB/1GB size), SanDisk Cruzer Micro (512 MB/1 GB size), or Sony (512 MB/ 1GB).

Supported file types .bmp, .png, .tiff, .tif, .pcx, .dcx

802.11n Wireless Network card

Manufacturing installs the wireless card. A wireless card CANNOT be installed postmanufacturing.

While other USB flash drives have not been tested, and therefore cannot be approved by Lexmark, these

products may function if the storage device meets the following qualifications:

• Supports the USB 2.0 specification supporting the Full-Speed mode

• Uses the FAT file system

PDF files used with Direct USB printing must support PDF standard version 1.5 or earlier. PDF files with

restricted printing permissions or encryption are not supported.

Operating modes

: Lexar FireFly

:.pdf,.gif,.jpeg,.jpg,

✔✔

✘✔

Mode Description

Normal Factory default Quiet Designed for customers where noise levels are a very important

Eco-Mode (Energy and Energy + Paper)

factor.

• Print quality is maintained at factory default level.

• Speed is reduced.

Designed for customers where the environment is a key factor. There are three options; Energy, Paper, and Energy+ Paper.

• Print quality is maintained.

• Power Saver is set to one minute.

• Fuser standby is off.

• The operator panel back light is off.

• Power supply energy consumption is reduced.

• Duplex is on if Energy + Paper is selected (duplex models

only) (can be overwritten by the driver).

General information 1-3

5025-2xx, 4xx

Data streams

✔—Supported ✘—Not supported

Data streams

Lexmark C540n, C543dn

Lexmark C544n,

C544dn, C544dw

PCL 6 emulation

PostScript Level III emulation

Version 3011 of the Adobe definition of PostScript 3 is supported.

PDF

Supports version 1.6

PPDS

By default, the PPDS interpreter is inactive. A user can activate the data stream by PJL or by the PPDS Emulation setting in the Configuration Menu.

PictBridge

Directimage

Devices that support Directimage support all of the following graphics formats: TIFF, TIF, JPEG, JPG, GIF, PNG, BMP, PCX, and DCX.

Host-Based Printing (HBP)/Graphics Device Interface (GDI)

Version 3 (color) uses PCL XL.

Dimensions

✔✔

✘✔

✔✔

Models Height Width D epth Weight

Lexmark C540n, C543dn, C544n, C544dn, C544dw

Lexmark C544dtn The Lexmark C544dn printer

with optional 640-sheet duo drawer

650-sheet duo drawer 133 mm (5.2 in.) 424 mm (16.7 in.) 416 mm (16.4 in.) 4 kg (8.7 lb)

291 mm (11.5 in.) 424 mm (16.7 in.) 400 mm (15.7 in.) 21 kg (46.2 lbs)

422 mm (16.6 in.) 424 mm (16.7 in.) 416 mm (16.4 in.) 25 kg (54.9 lbs)

1-4 Service Manual

5025-2xx, 4xx

Clearances

Description Dimensions

Lexmark C540n, C543dn,

C544n, C544dn, and C544dw

1 Rear 102 mm (4 in.) 102 mm (4 in.) 2 Front 508 mm (20 in.) 508 mm (20 in.) 3 Right side 152 mm (6 in.) 254 mm (10 in.) 4 Left side 76 mm (3 in.) 76 mm (3 in.) 5 Above 254 mm (10 in.)* 254 mm (10 in.)*

* Add 133 mm (5.2 in.) to the top if you want to add an optional 650-sheet Duo Drawer (Lexmark C54x

models only).

C544dtn

General information 1-5

5025-2xx, 4xx

Power and electrical specifications

The following table specified nominal average power requirements for the base printer configurations. All power levels are shown in Watts (W). Maximum current is given in Amperes (A).

Printing states Lexmark C540n, C543dn

Average power while printing

Simplex 480 W 500 W Automatic duplex* 340 W 340 W

Average power while idle

Power Saver 18 W 18 W Ready 34 W 36 W Off 0 W 0 W

* Automatic duplex is not supported on the C540n and C544n.

Lexmark C544n, C544dn, C544dw, and C544dtn

Typical electricity consumption2

Model Mode

Lexmark C540n, C543dn

TEC

3.73 kwh 3.5 kwh 3.92 kwh

TEC

—Eco Mode 3.41 kwh 3.30 kwh 3.55 kwh

Lexmark C544n, C544dn, C544dw, C544dtn

TEC

—Eco Mode 3.57 kwh 3.42 kwh 3.57 kwh

TEC

TEC—Typical Electricity Consumption.

Energy measurements are made according to ENERGY STAR Qualified Imaging Equipment Typical Electricity Consumption Test Procedure, and are in units of kilowatts per week (kwh/week). Actual electricity consumption will vary by device usage.

100 V/50 Hz 115 V/60 Hz 230 V/50 Hz

3.97 kwh 4.06 kwh 4.20 kwh

Power supply voltage (kwh)

Low-voltage models

• 110 to 127 V ac at 47 to 63 hertz (Hz) nominal

• 99 to 137 V ac, extreme

100 voltage models

• 100 V ac at 47 to 63 hertz (Hz) nominal

• 90 to 110 V ac, extreme

High-voltage models

• 220 to 240 V ac at 47 to 63 hertz (Hz) nominal (not available in all countries)

• 198 to 259 V ac, extreme

Notes:

• Using a 220 V ac to 110 V ac power converter with a low voltage printer is not recommended.

• Using an inverter to change DC to AC voltage (12 V to 120 V for example) is not recommended.

• All duplex models are ENERGY STAR compliant.

1-6 Service Manual

5025-2xx, 4xx

Acoustics

All acoustic measurements are made in accordance with ISO 7779-1999 and reported in conformance with ISO9296:1988-04-15.

Operating mode 1-Meter average sound pressure at 4800 CQ

Lexmark

Lexmark C544dn, C544dw

Printing (simplex) 47 dBA 47 dBA 49 dBA 49 dBA 49 dBA Printing (automatic

duplex) Idle Inaudible Inaudible Inaudible Inaudible Inaudible Quiet Mode (simplex) 46 dBA 46 dBA 46 dBA 46 dBA 46 dBA

C540n

N/A 50 dBA N/A 51 dBA 51 dBA

Lexmark C543dn

Lexmark C544n

Lexmark C544dn, C544dw

Lexmark C544dtn

Environment specifications

Environment Specifications

Operating

Air temperature—operating 15.6 to 32.20° C (60 to 90.0° F) Air temperature—power off 10.0 to 43.30° C (50 to 110.0° F) Air relative humidity Relative Humidity 8 to 80% Wet bulb temperature—operating 22.80° C (73.0° F) maximum Wet bulb temperature—power off 26.70° C (80.10° F) maximum Altitude 0–3,048 meters (10,000 ft.) Atmospheric pressure 74.6 kPa Ambient operating environment* 15.6 to 32.2° C (60 to 90° F) and 8% to 80% RH

Ship / Storage

Cartridges -40 to 43.3° C (-40 to 110.0° F) Printer with cartridges -40 to 43.3° C (-40 to 110.0° F) Printer without cartridges -40 to 43.3° C (-40 to 110.0° F) Air relative humidity Relative Humidity 8 to 80% Altitude 10,300 meters (34,000 feet) Wet bulb temperature—power off 26.70° C (80.10° F) Maximum * In some cases, performance specifications (such as paper OCF, EP cartridge usage) are specified to be

measured at an ambient condition.

General information 1-7

5025-2xx, 4xx

Media handling

Input and output sources

Sheet numbers are assuming 20 lb. xerographic paper

Standard input sources

Standard input tray (250-sheet tray) 250 sheets 250 sheets 250 sheets Manual feed slot (1-sheet) 1 sheet 1 sheet 1 sheet Second tray capacity (650-sheet Duo

Drawer) Multipurpose try capacity (650-sheet Duo

Drawer)

Optional input sources (maximum 1, total of all inputs is 4)

650-sheet duo drawer (includes 100-sheet MP feeder)

Maximum total input capacity 901 901 901

Duplex

Standard output sources (no optional output sources are available)

Standard 100-sheet bin 100 100 100

a In the 650-sheet duo drawer, the 550-sheet tray and the integrated MP feeder count as two independent

input sources. The MF feeder is configured as “cassette” does not show up as Configure MP in the Paper Menu.

Lexmark C540n, C544n

N/A N/A 550 sheets

N/A N/A 100 sheets

550 sheets

(or 100 sheets in

MP feeder)

N/A Duplex

Lexmark C543dn, C544dn, C544dw

550 sheets

(or 100 sheets in

MP feeder)

Lexmark C544dtn (C544dn with second tray)

Duplex capability

✔—Supported ✘—Not supported

Models

Lexmark C540n Lexmark C543dn

Lexmark C544n

Lexmark C544dn

Lexmark C544dw

Duplex capability

✘

✔

✘

✔

1-8 Service Manual

5025-2xx, 4xx

Media input size specifications

✔—Supported without size

sensing

✘—Not supported

(in the

Input source

A4 210 x 297mm

A5a 148 x 210mm

A6 ✘✘

JISb B5a 182 x 257mm

JISb B4 ✘✘✘✘✘

Letter 8.5 x 11 in.

Legal 8.5 x 14 in.

Executive 7.25 x 10.5 in.

Oficio (Mexico)

Foliod 8.5 x 13 in.

Statement 5.5 x 8.5 in. ✘✘

Universalc

148 x 210mm to

215.9 x 355.6mm (5.83 x 8.27 in. to

8.5 x 14 in.)

250-sheet tray

Optional 650-sheet

duo drawer

MP feeder

650-sheet duo drawer)

Manual slot

Duplex

✔✔✔✔✔

✔✔✔✔

✔

✔✘

✘

✔✔✔✔✔

✔✔✔✔

✔✔

✔✔✔✔

✘

✔

✘

76.2.x 127mm to

215.9 x 355.6mm (3 x 5 in. to 8.5 x 14 in.)

210mm x 279.4mm to

215.9mm x 355.6mm (8.27 in. x 11 in. to

8.5 in. to 14 in.)

7¾ Envelopea 98.4 x 190.5mm ✘✘

9 Envelopea ✘✘

10 Envelopea 104.8 x 241.3mm

(4.12 x 9.5 in.)

DL Envelopea 110 x 220mm

(4.33 x 8.66 in.)

C5 Envelopea 162 x 229mm

(6.38 x 9.01 in.)

✘

✔✔✔✔

✘✘

✘✘✔✔✘

✘

✔✔

General information 1-9

✘

✔

✘

5025-2xx, 4xx

✔—Supported without size

sensing

✘—Not supported

(in the

Input source

B5 Envelopea ✘✘✔✔✘

Other envelopea

Length: 98.4–431.8mm (3.8–17 in.) Width: 89–297mm (3.5–11.7 in.)

The MP feeder runs slower if A5, statement, B5, or envelopes are loaded.

Japanese Industry Standard.

Although the user may select Universal paper size for these sources, not all tray guides can be adjusted to all Universal media sizes.

If a source supports size sensing and this feature is activated, then neither Oficio or Folio appear in the list of supported media sizes. These values only appear in a list of supported media sizes when the source is non-size sensing or the size sensing is deactivated.

Media input type specifications

✔—Supported ✘—Not supported

Input type

250-sheet tray

Optional 650-sheet

duo drawer

✘✘

250-sheet tray

Optional

650-sheet

Duo Drawer

MP feeder

650-sheet duo drawer)

Manual slot

✔✔

MP feeder

(in 650-sheet

Duo Drawer)

Manual feeder

Duplex

✘

Duplex

Plain paper ✔✔✔✔✔

Card stock ✔✔✔✔

Transparency ✔✔✔✔✘

Recycled

Glossy ✔✔✔✔✔

Heavy glossy

Paper-backed labels ✔✔✔✔

Bond ✔✔✔✔✔

Envelopes

Rough envelopes ✘✘✔✔✘

Letterhead ✔✔✔✔✔

Preprinted ✔✔✔✔✔

1-10 Service Manual

✘

✔✔✔✔✔

✘✘✘✘✘

✘✘✔✔✘

5025-2xx, 4xx

✔—Supported ✘—Not supported

Input type

Colored paper ✔✔✔✔✔

Light paper ✔✔✔✔✔

Heavy paper ✔✔✔✔✔

Rough or cotton ✔✔✔✔✔

Custom type <x>

For MP feeder and manual feeders, the Default Source Menu displays Manual Paper and Manual

Env. Select Manual Env. for envelopes or when the type in Custom Type <x> is an envelope. For other types, use Manual Paper.

The duplex unit supports this media type as long as the customer has selected the custom type from those types the duplex unit supports.

Media output size and type

There is a single 100-sheet output bin available for this printer and no additional output options.

250-sheet tray

Optional

650-sheet

Duo Drawer

MP feeder

(in 650-sheet

Duo Drawer)

Manual feeder

Duplex

✔✔✔✔✔

Weight ranges for each media type

Material Type Weight Select

2, 5, 7, 8

Paper

Specialty papers Gloss Book 88 to 176 g/m

Card stock—upper limit (grain long)

Card Stock—upper limit (grain short)

Transparency Labels—upper limit Paper 131 g/m

Xerographic or

business paper

Gloss Cover 162 to 176 g/m Index Bristol 120 g/m2 (67 lb)

Tag 120 g/m Cover 135 g/m Index Bristol 163 g/m2 (90 lb)

Tag 163 g/m Cover 176 g/m

Laser printer 170 to 180 g/m2 (45 to 48 lb bond)

60 to 74. 9 g/m2 grain long (16 to 19.9 lb bond)

75 to 89.9 g/m

2, 5

grain long

(20 to 23.8 lb bond)

90. to 104.9 g/m

grain long

(23.9 to 27.8 lb bond)

105 to 176 g/m (27.9 to 47 lb bond)

grain long

grain long (60 to 120 lb book)

grain long (60 to 65 lb cover)

(74 lb) (50 lb)

(100 lb) (65 lb)

(35 lb bond)

Light Paper

Plain Paper

Heavy Paper

Card stock

General information 1-11

5025-2xx, 4xx

Material Type Weight Select

Envelopes (Multipurpose

feeder or manual slot only)

For 60 to 176 g/m2 paper, grain long fibers are recommended.

Paper less than 75 g/m2 (20 lb) must be printed with Paper Type set to Light Paper.

100% cotton content maximum weight is 24 lb bond.

28 lb bond envelopes are limited to 25% cotton content.

The duplex unit supports paper weights between 60–105 g/m2 (16–28 pound) grain long bond. The duplex

unit does not support card stock, transparencies, envelopes, or labels.

Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the standard tray, manual slot, and the multi-purpose feeder.

Paper 90 to 104.9 g/m2 (23.9 to 27.8 lb) must be printed with Paper Type set to Heavy Paper.

Paper 105 to 176 g/m2 (27.9 to 47 lb) must be printed with Paper Type set to Cardstock.

Sulfite, wood-free or up to 100% cotton bond

60 to 105 g/m

to 28 lb bond)

3, 4

Media guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

• Weight—The printer can automatically feed paper weights from 60 to 176 g/m

long. Paper lighter than 75 g/m performance, use 80 g/m in.), we recommend 90 g/m

(20 lb) might not be stiff enough to feed properly, causing jams. For best

(21 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1

or heavier paper.

• Curl—Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding

problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

• Smoothness—Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it

properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 200 Sheffield points produces the best print quality.

• Moisture content—The amount of moisture in paper affects both print quality and the ability of the printer

to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance. Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

• Grain direction—Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain

long, running the length of the paper, or grain short, running the width of the paper. For 60 to 176 g/m to 47 lb bond) paper, use grain long fibers.

• Fiber content—Most high-quality xerographic paper is made from 100% chemically treated pulped wood.

This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton possesses characteristics that can negatively affect paper handling.

(16 to 47 lb bond) grain

(16

Unacceptable paper

The following paper types are not recommended for use with the printer:

• Preprinted papers with chemicals that may contaminate the printer

• Preprinted papers that can be affected by the temperature in the printer fuser

• Coated papers (erasable bond), synthetic papers, thermal papers

• Rough-edged, rough or heavily textured surface papers, or curled papers

1-12 Service Manual

+ 206 hidden pages