Lexicon QLI-32 Parts list

QuantumLogic® Immersion

Provide an immersive sound experience within budget and gain a competitive edge with Lexicon's QLI-32. Intelligent and flexible, this cinema processor is fully compatible with existing cinema processors and designed to deliver up to 32 channels of surround sound. For an immersive and life-like sound experience, the QLI-32 is the smart solution for any cinema.

Features

• Compatible with existing systems

• Flexible location for height channels

• GPI control

• 8 channel Analog input (25-Pin Connector)

• 8 channel AES input (RJ-45 Connector)

• BLU link input/output (2 RJ-45 Connectors)

• Ethernet control

• Create an immersive audio environment from stereo, 5.1 and 7.1 inputs

• Output up to 32 discrete channels of audio over BLU link

• 1/3 octave graphic EQ for each output channel

• Parametric EQ on low frequency extension

• Web–based interface

QuantumLogic® Immersion

A B

Front Panel Indicators

A. On LED – indicates power supply is active and unit is powered

B. Status LED – indicates when QLI configuration is

occurring (GREEN) or when a fault has occurred (RED)

C. Audio Source LEDs – indicates how the unit is

configured (Analog, AES/EBU, or BLU link)

D. Input Configuration – indicates what input the

unit is configured for (Stereo, 5.1, or 7.1)

Audio Inputs

E. Mic Input for Calibration and Auto-EQ per SMPTE 202

F. 8 Channel Analog Input – 25-pin D-sub female connector

for Stereo, 5.1, and 7.1 systems, 300mV nominal input level

G. 16 Channel AES/EBU Input – 2 stacked RJ-45 connectors;

each connector can have up to 8 channels of audio

H. BLU link – 2 stacked RJ-45 connectors;

can link with other BLU link enabled products

Audio Output

H. BLU link – 2 stacked RJ-45 connectors

Network Control

I. Ethernet Interface - 1 RJ-45 connector for configuration and control

F EGHI

Power

• Universal power supply 100VAC – 240VAC (+/-10%), 50/60Hz

• 15A IEC Inlet with field serviceable fuse

Dimensions

• 1.67” (4.24 cm) x 19” (48.26 cm) x 10.5” (26.67 cm) (H x W x D)

Automation Control for

• Source Selection

• Input Configuration

• QLI Bypass

• Mute

Communications

• RJ-45 female connector for configuration and automation control

• 12-Pin block connector for configuration, mute, QLI bypass, and source selection

Performance Specifications

• Signal to Noise Ratio: 110dB (20Hz – 20kHz)

• AES/EBU Sampling Rate: 48k, 96k

• BLU link Sampling Rate: 48k

Features

• 1/3 Octave graphic EQ per channel

• 1/3 Octave real time analyzer

• Parametric EQ for LFE

• QuantumLogic Surround technology